Hi, fisrt of all I'm sorry if this is not the right site for this thread, I have a P30 pro VOG-L04 that doesn't detect any sim card, I hope someone can help me to solve this issue, I just bought the phone, the person that sell me the phone already told me from that issue, I already checked the sim board and eveything looks good, thank's in advance.
If the device isn't SIM locked then I suggest you check wether the SIM card is properly touching the gold part on the board. You can add some tape to the top of the SIM to make it bulkier. Good luck
Hi, thanks for the help, I already change the sim reader, but nothing happened, a friend of mine tell me that maybe the modem gone wrong, and that's why the phone don't detect the sim any idea how to repair the modem??
Hi friends, sorry to ask but, did someone have the p30 pro schematics? Or the repair manual, I want to see the movil network diagram, maybe I can repair my phone
i know im late but i had this problem for two days after coming back from vacation from a humid place. it seems that the sim board needed reconnecting. what i did (lil technical background) is i opened the back with a heat gun and unscrewed the bottom right part on the phone where the sim tray is and disconnected and reconnected all the wiring on that section. Shame i didnt do this before i formatted the phone before but i hope this helps someone else coz now everything is working as usual. (nothing needs to be removed, just the connections need to be disconnected and reconnected)
Related
Can't figure out why. It's unlocked and I just took it back to factory settings.
For some reason it just stopped recognizing my SIM. Anything I can try? I would hate to assume it's broken.
Assuming you've searched the forum...
does the sim work on other phones? does another sim work in your kaiser or it doesn't recognize ANY sim?
have you tried cleaning the sim bay? (i dunno whats the recommended way to clean that area or even if cleaning it will make any difference)
and one more time...search this forum...i remember seeing quite a few threads about sims not getting recognized all of a sudden
My SIM works in other phones, but nothing works in this one.
I did search, but only found issues with the phone not reading it after flashing to a cooked ROM, not official ones. It didn't recognize it before or after I flashed to back to factory.
** I saw where apparently tmobile sims require a little more pressure, but that hasn't worked.
I've tried three different SIMS, one on tmo and one on att
So no one else?
similar issue !!
similar issue with gene(HTC 3400i)....
sending it for a replace tomorrow, but i will be thankful if somebody can advise a solution for this issue.
Have a look at this thread for a few ideas:
http://forum.xda-developers.com/showthread.php?t=423724
ideas
try cleaning your sim card with medical alcohol it help in some cases
ask for sim replacement from your network provided (from experience and reading - kiaser is very sensitive to sims)
Someone posted about this last month and his solution solved my problem.
Slide a piece of paper between the top of the SIM card and the top metal clip to push it down harder onto the contacts.
In my case some SIMs would not work, but this has cured it.
Tilt was previously working. Now shows "No SIM" on screen when any SIM is inserted.
Any idea what the issue might be?
I am not the current owner of the tilt, nor do I have access to it to test anything, so that is basically everything I know about it.
What is your best guess?
Thanks
is it your phone or is it a phone you got of e-bay.
If of e-bay it may be that yur IMEI is barred.
saopacic said:
is it your phone or is it a phone you got of e-bay.
If of e-bay it may be that yur IMEI is barred.
Click to expand...
Click to collapse
Ebay.
Well if that is that case great, because my carrier does not ban IMEIs, so it will work perfectly for me.
Is that really the message you would get if your IMEI was dissabled though? That doesn't really make sense, as it would see the SIM and you would see it say: Searching for network... Registering... and then it might say no SIM, but it says no SIM right away, so that can't really be it.
Any other ideas?
this is usualy a bad sim card..
usualy either a worn card.. or possibly an issue on the att side with your sim number
if you frequent any core att stores you might could get a free one..
I stopped bidding for it on eBay, cuz I don't feel like taking the risk.
It sold for $127.50
Sounds silly, i know, but i had the same a while ago, found the sim goes in and locks shut back to front the contact part going in last, just maybe this simple
I had a similar problem with my new Tytn II. Only 3 days old and after I took out and reinserted SIM, I got the "No SIM" message, same problem with another SIM card as well.
Just as I was ready to return the device, after a final test with my SIM card, it decided to work. I have not taken out the SIM since and this problem hasn't shown up.
There have been a couple of threads on this problem.
It would seem that the design of the SIM connector is not all that it should be.
My main SIM sometimes wouldn't connect and another couple of SIMs would not connect at all.
A piece of paper, folded if necessary, inserted between the SIM card and the metal clip to increase the contact pressure has completely fixed the problem on mine, but apparently it has not worked for everyone.
Alright, new to the forums so please bare with me! Here goes:
A little while ago I started getting the "Sim Card Is Missing" error on my Kaiser. I've done many things to remedy the problem and still to no avail, the problem remains. What I'm looking for is any advice or any other ideas that someone might be able to give me on this problem. Here's a list of what I've already done.
-Replaced SIM with a brand new SIM from ATT Dealer.
-Dissassembled phone and cleaned SIM contacts as well as SIM socket connector.
-Soft reset, and soft reset, and soft reset......you get the idea.
-Wedged a piece of paper, then cardboard on top of SIM to make more pressure
-Disabled 3G network, run solo on EDGE/GPRS, as well as used outdated SIM to see if that would solve the problem.
There have been a few other "everything else's" that I've probably tried, but nothing worth mentioning.
All of these different things I've done have all solved the problem for a small amount of time (1 minute-a full day), but the problem keeps coming back. Typically after taking the SIM out and restarting my phone, the phone does work for about 15 minutes, and then ceases to live.
If anyone, anyone at all has any insight or suggestiong, please post back in this thread, your help is much appreiciated. I've already taken the phone to a repair shop and got ripped off $160, so I'm at my last rope here. Thanks all!
Dig Life!
D
the sim card is missing probably the best solution
i have had this problem before on a wizard and a kaiser too what i found out on both phones one bought off ebay and the other i bought 2nd user from the local paper is that one of the phones was reported stolen (not saying that yours is) and that is what comes up when the imei has been switched off the network and the wizard i found out had an imei which had been changed. the solution i found is when i used the wizard service tool to change the imei on the phone with one on an old phone what i had to see iuf that would work, the sim card missing error disappeared and that fixed the problem so i do reckon that has something to do with your problem.
p.s. changed the imei number back to what it was as its sort of illegal to change imei`s lol
regards
hacka 1010
The Kaiser (at&t tilt version at least) is notorious for having a loose fitting Sim socket. If your SIM has any age to it the contacts are worn.
Put a piece of tape (or two on the back to thicken it) then reinsert it. If this fixes your problem get a new SIM from your carrier.
Hi i have problem witch Kaiser showing No Service
someone had such problem , and has some solution maybe
sorry for my English
Regards
first thing would be to check if your sim card isn't bad or have been disconnected from your service, so either call your service provider or put your sim card in another device and see if it gets service.
fone_fanatic said:
first thing would be to check if your sim card isn't bad or have been disconnected from your service, so either call your service provider or put your sim card in another device and see if it gets service.
Click to expand...
Click to collapse
Hi im done all this steps before im ask for help thenks for you answer any another solution Regards
check your radio and see if it is compatible with your rom. You can figure that out by looking at the ultimate radio thread which is a sticky in the Kaiser Rom Development forum.
ALso have you used any external antennas that plug into next to the camera?
One time i stuck a copper wire on mine to use it as an antenna and when i took it out i could never get service unless it was plugged in so i think it damaged the antenna on the device.
Hi i have spice MI 410, or Huaweii Ideos X6 phone, iam fed up of this phone, everthing is working except the calling issuing.
If i make a call or receive a call the call goes blank, then i have to reconnect again and again it goes blank, i gave it to the service center but still the same problem, last time in this forum i got a reply to do sharp fix 2, i dont have any idea how to do sharp fix
Can someone take some time and help me to flash to shap fix 2, how to do CWM recovery mode in detail step by step how to do it
And the links also side by side,
You help will be greatly appreciated
Why don't u try other networks to see, as in change your sim card to another sim on another network to see if its actually a hardware problem cos if it is, there is no amount of flashing that would solve that. Your case might just be a case of a faulty sim card, an unregistered sim card, or even an expired one. Just check another network, try your sim card with another phone to check to be absolutely sure.