Database Develop

[Q] Huawei Honor 3c IMEI Problem

Hi,
I have seen kitkat released for huawei honor 3c. I upgraded my phone to kitkat but after upgrading my sim network does not work, I lost my IMEI number. I downgraded my phonr to jellybeans (b108) But still ia m facing the same problem, IMEI is not showing in the setting. It shows IMEI>unknown. Is there any solution of it, also I dont have any backup

Flash this via twrp recovery http://forum.xda-developers.com/attachment.php?attachmentid=2883582&d=1407157805
Sent from my H30-U10 using Tapatalk

is it ok
bhaiwala said:
Flash this via twrp recovery http://forum.xda-developers.com/attachment.php?attachmentid=2883582&d=1407157805
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
hi jahanzaib01 have you found a solution?
thanks

Problem solved
Kweck80 said:
hi jahanzaib01 have you found a solution?
thanks
Click to expand...
Click to collapse

jahanzaib01 said:
Click to expand...
Click to collapse
I have the same problem with Huawei Honor 3 HN3-U01. Do you have a solution for me? thanks

i have same problem also....h30-u10 malaysia set....i have update from b113 to b261 and now i flash back b108 and imei lost and sim not detect

bhaiwala said:
Flash this via twrp recovery http://forum.xda-developers.com/attachment.php?attachmentid=2883582&d=1407157805
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
i can't open the link < i have the same problem exactly
pls help me

Same Problem
I couldn't get reach of the attachment, said removed. Could somebody help? Much appricated.

solved
ok this is the easy solution for imei with on simply APK with name CHAMELEPHON ,full root, unlock bootloader ,run apk , write imei , wait and when finish remove battery and reboot... worked

the link for the IMEI fix
hard_snake said:
I couldn't get reach of the attachment, said removed. Could somebody help? Much appricated.
Click to expand...
Click to collapse
h**p://1drv.ms/1FNtZUj
---------- Post added at 08:07 PM ---------- Previous post was at 08:03 PM ----------
mohamed-elholandy said:
i can't open the link < i have the same problem exactly
pls help me
Click to expand...
Click to collapse
h**p://1drv.ms/1FNtZUj

IMEI Null G925A

So, I flashed the 7.0 firmware on my phone it worked well, then an update cane out that also worked well. In April now another update came out I flashed it and I was unable to get past the set up wizard so I downgraded to marshmallow then ugraded to 7.0 again. After I upgraded back I realized my imei and based band were unknown and I wasn't able to make any calls, is there any fix for this, I haven't been able to call or receive calls for over 2 weeks and help is much appreciated.

After upgrading to QC9 follow the bellow procedure.
https://forum.xda-developers.com/showpost.php?p=71745522&postcount=24

tyler.myles said:
So, I flashed the 7.0 firmware on my phone it worked well, then an update cane out that also worked well. In April now another update came out I flashed it and I was unable to get past the set up wizard so I downgraded to marshmallow then ugraded to 7.0 again. After I upgraded back I realized my imei and based band were unknown and I wasn't able to make any calls, is there any fix for this, I haven't been able to call or receive calls for over 2 weeks and help is much appreciated.
Click to expand...
Click to collapse
Having the same problem. I just updated to 7.0. But now my imei is unknown. I still have the S/N but can't make any calls. Any help would be appreciated. Thanks!

santhi4110 said:
After upgrading to QC9 follow the bellow procedure.
https://forum.xda-developers.com/showpost.php?p=71745522&postcount=24
Click to expand...
Click to collapse
I'm on the QB9 now and I'm still having the same problem. I tried that as well and it didn't help. Thanks however.

wat si firmware version of 6.0.1 you flashed...sorry for my bad english

arbrii29 said:
wat si firmware version of 6.0.1 you flashed...sorry for my bad english
Click to expand...
Click to collapse
DKP5

santhi4110 said:
After upgrading to QC9 follow the bellow procedure.
https://forum.xda-developers.com/showpost.php?p=71745522&postcount=24
Click to expand...
Click to collapse
So I no longer have the imei error after upgrading back to QC9, apparently it comes with a boatloader update and by downgrading back to marshmallow the phone wasn't able to read the efs folder where the imei is stored. Thank You All For Your Help!

tyler.myles said:
So I no longer have the imei error after upgrading back to QC9, apparently it comes with a boatloader update and by downgrading back to marshmallow the phone wasn't able to read the efs folder where the imei is stored. Thank You All For Your Help!
Click to expand...
Click to collapse
I can't find
SS-G925AUCS5DPK5-to-U5EQC9-UP. I've click the link and its telling me not found
---------- Post added at 08:52 AM ---------- Previous post was at 08:47 AM ----------
santhi4110 said:
After upgrading to QC9 follow the bellow procedure.
https://forum.xda-developers.com/showpost.php?p=71745522&postcount=24
Click to expand...
Click to collapse
Need help I can't find
SS-G925AUCS5DPK5-to-U5EQC9-UP every time I click the link it's telling me not found

Dannydan2017 said:
I can't find
SS-G925AUCS5DPK5-to-U5EQC9-UP. I've click the link and its telling me not found
---------- Post added at 08:52 AM ---------- Previous post was at 08:47 AM ----------
Need help I can't find
SS-G925AUCS5DPK5-to-U5EQC9-UP every time I click the link it's telling me not found
Click to expand...
Click to collapse
Read this : http://forum.xda-developers.com/showthread.php?p=71681656
On Edge of Galaxy

norbarb said:
Read this : http://forum.xda-developers.com/showthread.php?p=71681656
On Edge of Galaxy
Click to expand...
Click to collapse
Thanks bro I found it

Plz Help Me To Get Back My IMEI

I have tried PE, RR, Validus, Stock TWRP, and stock firmware but still my IMEI is 0 plz help me
Thanks
?

Himanshu.Shukla said:
I have tried PE, RR, Validus, Stock TWRP, and stock firmware but still my IMEI is 0 plz help me
Thanks
?
Click to expand...
Click to collapse
Same case with me
---------- Post added at 03:15 PM ---------- Previous post was at 03:14 PM ----------
Himanshu.Shukla said:
I have tried PE, RR, Validus, Stock TWRP, and stock firmware but still my IMEI is 0 plz help me
Thanks
?
Click to expand...
Click to collapse
If you found solution please share

Try cosmic,bootleggers,AOSP, I too had the issue .... It usually generates when u degrade the OS u r on ....... Hope it helps

Surya Guduru said:
Try cosmic,bootleggers,AOSP, I too had the issue .... It usually generates when u degrade the OS u r on ....... Hope it helps
Click to expand...
Click to collapse
So is ur problem solved with these Roms?

Himanshu.Shukla said:
I have tried PE, RR, Validus, Stock TWRP, and stock firmware but still my IMEI is 0 plz help me
Thanks
Click to expand...
Click to collapse
Install Soak Test and your IMEI will return.

Manovips said:
Install Soak Test and your IMEI will return.
Click to expand...
Click to collapse
Without IMEI i m unable to relock the bootloader so how can i install the soak?

Himanshu.Shukla said:
Without IMEI i m unable to relock the bootloader so how can i install the soak?
Click to expand...
Click to collapse
Install via sideload or try to install with the bootloader unlocked

Manovips said:
Install via sideload or try to install with the bootloader unlocked
Click to expand...
Click to collapse
How to use sideload plz explain

Himanshu.Shukla said:
How to use sideload plz explain
Click to expand...
Click to collapse
https://youtu.be/AMRkSIzOkoo , Use this method (working with bootloader unlocked)

Manovips said:
https://youtu.be/AMRkSIzOkoo , Use this method (working with bootloader unlocked)
Click to expand...
Click to collapse
Already tried but not getting any update notification

Himanshu.Shukla said:
Already tried but not getting any update notification
Click to expand...
Click to collapse
you gave storage permissions on moto update services? And searched for update?

Manovips said:
you gave storage permissions on moto update services? And searched for update?
Click to expand...
Click to collapse
Yes but didn't get anything

Nope doesn't works at all
Hi, I have tried all the given methods, but even installing the update being on April patch via Stock Recovery doesn't helps, I dont know what to do, can any senior member kindly look into the matter?

lg up tool

who can send me the link LG Up tool for v40?

There is NO working one...
No way to flash at present.

sas007 said:
There is NO working one...
No way to flash at present.
Click to expand...
Click to collapse
thank you

If someone needs to flash or crossflash the phone - contact me via pm

5centr5 said:
If someone needs to flash or crossflash the phone - contact me via pm
Click to expand...
Click to collapse
:good:

5centr5 said:
If someone needs to flash or crossflash the phone - contact me via pm
Click to expand...
Click to collapse
I need.

5centr5 said:
If someone needs to flash or crossflash the phone - contact me via pm
Click to expand...
Click to collapse
I PM a couple of days ago.

5centr5 said:
If someone needs to flash or crossflash the phone - contact me via pm
Click to expand...
Click to collapse
Hey I need to crossflash

5centr5 said:
If someone needs to flash or crossflash the phone - contact me via pm
Click to expand...
Click to collapse
I also need a bit of help please!

mylgphones.com/lgup-dll-for-lg-v40-thinq-version1-9-39-7.html

Belzzz said:
mylgphones.com/lgup-dll-for-lg-v40-thinq-version1-9-39-7.html
Click to expand...
Click to collapse
Just found it too! I cross-flashed through 1.15 using powershell and CMD commands, (seen in this thread https://forum.xda-developers.com/lg-g7-thinq/how-to/cross-flash-oreo-pie-firmwares-lg-g7-g7-t3915303) But is subbed with LG V40 firmware and this DLL! It worked like a charm! Now the only issue is it that it didn't unlock the phone like it does for other LG models. So now I need to figure out how to unlock it haha! Feels good to be able to cross-flash the LG V40 though!

mylgphones.com/lgup-dll-for-lg-v40-thinq-version1-9-39-7.html
Gonna see what this is all about

Ainz_Ooal_Gown said:
mylgphones.com/lgup-dll-for-lg-v40-thinq-version1-9-39-7.html
Gonna see what this is all about
Click to expand...
Click to collapse
Ive seen your name all over these threads as I looked how to crossflash the V40. With this DLL I finally did it! Only problem is the phone is still network locked when cross-flashed. Any idea how to unlock them?
---------- Post added at 10:08 PM ---------- Previous post was at 10:03 PM ----------
Ainz_Ooal_Gown said:
mylgphones.com/lgup-dll-for-lg-v40-thinq-version1-9-39-7.html
Gonna see what this is all about
Click to expand...
Click to collapse
Probably good to mention USB 3.0 Gave me a "Cannot decide device boot mode. set Unknown Mode" error so I switched to 2.0 and it went through through command prompt.

RickWells said:
Ive seen your name all over these threads as I looked how to crossflash the V40. With this DLL I finally did it! Only problem is the phone is still network locked when cross-flashed. Any idea how to unlock them?
---------- Post added at 10:08 PM ---------- Previous post was at 10:03 PM ----------
Probably good to mention USB 3.0 Gave me a "Cannot decide device boot mode. set Unknown Mode" error so I switched to 2.0 and it went through through command prompt.
Click to expand...
Click to collapse
Well currently no known method for us to sim unlock the V40 other then staying on contract for "x" amount of time and having the carrier themselves give you the unlock code...for AT&T i think you just need to ask them for it and have your receipt for proof of purchase.

Ainz_Ooal_Gown said:
Well currently no known method for us to sim unlock the V40 other then staying on contract for "x" amount of time and having the carrier themselves give you the unlock code...for AT&T i think you just need to ask them for it and have your receipt for proof of purchase.
Click to expand...
Click to collapse
Okay, Thank you! Were you able to cross-flash?

RickWells said:
Okay, Thank you! Were you able to cross-flash?
Click to expand...
Click to collapse
Well i cross flashed via a different method but becasue of that method i have to undo somethings before i can successfully do this method

Confirming the new DLL + LGUP 1.15 CMD version works to flash V40 V405EBW.
Finally. Excellent.
Australian Pie with July security patch is currently the most recent release for V405EBW FWIW.

onslaught86 said:
Confirming the new DLL + LGUP 1.15 CMD version works to flash V40 V405EBW.
Finally. Excellent.
Australian Pie with July security patch is currently the most recent release for V405EBW FWIW.
Click to expand...
Click to collapse
That's awesome, wish I could get the July patch for my Sprint Unlocked PIE.

Droidman61 said:
That's awesome, wish I could get the July patch for my Sprint Unlocked PIE.
Click to expand...
Click to collapse
Hopefully someone can give this method a whirl with a Sprint unit + US unlocked KDZ to see if crossflashing works.
Crossflashing does work on the G7 using this method so it just might.
Then we'll just need the commands for LGUP_cmd to flash without wiping and we'll really be in business for ongoing updates.

onslaught86 said:
Hopefully someone can give this method a whirl with a Sprint unit + US unlocked KDZ to see if crossflashing works.
Crossflashing does work on the G7 using this method so it just might.
Then we'll just need the commands for LGUP_cmd to flash without wiping and we'll really be in business for ongoing updates.
Click to expand...
Click to collapse
This is How I flashed mine from a Sprint to unlocked and it read Network Locked upon inserting another carriers SIM. So now we need to figure out how to unlock them.

EDL account help required please

Hi
I searched the forums up and down and looked at several options to restore my Chinese K20 pro from a hard brick. I have tried for several days now. Contacted the Russian guy, looked at the Xiaomi tool forum. etc
I have the phone open on and can see the Qualcomm 9008 in device manager already.
Please does someone have an authorised EDL account or method to fix this?
All other forums are old pre 2020 hence the reason for a new post.
Thanks in advance
KaBoom

I was in same situation, opened phone, did edl test point method, contacted various shady people ect ect yet no one replied.
I already had unlocked bootloader and never found out why phone randomly bricked, tried everything to unbrick so as a last resort I relocked bootloader and unlocked (miflash unlocked instantly no wait time, doubt I'll get that luck again) flashed fastboot rom and it booted. Just a suggestion for ya to try if you can't find someone with edl account.

What did you guys do brick the phone?

petenoni said:
What did you guys do brick the phone?
Click to expand...
Click to collapse
I flashed the EU rom on my Chinese unlocked bootloader K20 pro, but forgot to uncheck the clean and lock option There been 100's of cases of this as this is the default option and there are several forum posts on XDA.
This issue does NOT have a working solution ATM......... fingers crossed.

KaBoom786 said:
I flashed the EU rom on my Chinese unlocked bootloader K20 pro, but forgot to uncheck the clean and lock option There been 100's of cases of this as this is the default option and there are several forum posts on XDA.
This issue does NOT have a working solution ATM......... fingers crossed.
Click to expand...
Click to collapse
solved the problem?

Lucaslmr33 said:
solved the problem?
Click to expand...
Click to collapse
nein

i have the same problem...

You need to get in touch with the Russian chaps from unbrick website they charge $30 now? but they the only ones with working solution!

Hi there. Did you tried logging in from mi flash tool and flash the rom?

dacia19 said:
Please help me bro, I wrote pm
Click to expand...
Click to collapse
Hi, friends this community is for share information about our devices, I think that information should be provided for everyone, using this forum no pm

ozkr0606 said:
Hi, friends this community is for share information about our devices, I think that information should be provided for everyone, using this forum no pm
Click to expand...
Click to collapse
People who can remotely EDL flash will charge for the service, last I saw it was up to $40. It is against XDA terms to promote paid for services, so we can not share information about who can EDL flash, if that person charges for doing so. Therefore people are sharing this information through PM's.

Leo Philip said:
Pm me bro. I can help u out. Mine was also the same. But i recovered it..
Click to expand...
Click to collapse
bro i need help to can you my device stuck fastboot mode and only one way to unbrick is edl mode