Related
I will soon be opening up my phone (T-mobile Pocket PC Phone Edition) to replace the glass screen with a new one ordered online. I've never even opened the phone before and was wondering if someone has performed this operation before. I would really appreciate any pointers, tricks, cautions, pictures, etc.
Thanks.
lawrence... where did u get the replacement??
i wonder if they got replacement cases! i chiped mine
The company I bought the screen from was GetHighTech, Inc, in California. By coincidence, they are about an hour's drive away from my home.
They only sell the glass screen and high capacity battery replacements. The screen comes with absolutely no documentation or instructions. I just got it a few minutes ago.
just wanted to see if you had any luck with the changeout.
Screen replaced successfully: observations
It was a tricky operation, but I finally managed to replace my broken touch screen. And the patient is alive, and only a little worse off for the experience.
I was held back for a week until I could get the right size torx screwdrivers to remove the back cover. Once inside, it was a very very tricky process slicing off the broken screen with a razor blade. It was glued to the lcd display. This would have been hard even if the screen was not shattered. Definitely needed goggles to protect against flying splinters of glass. I used cotton swabs and 99% alcohol to clean the glass dust off the glue around the edges of the lcd, then I put the new screen on while that residual gum was still a bit tacky.
There was a very thin existing plastic cover over the lcd in between the glass touch screen and the rest of the lcd. Since it did not come off with the glass, I left it in place even though it had a couple of small scratches from contact with the broken glass. It seems like it was there to keep dust off the lcd or something like that.
This was my first time inside the phone. I noticed that replacing the whole LCD component would have been a trivial task by comparision to replacing the glass alone. And even easier would have been adding a new battery.
cracked lcd on xda
hi, does anybody know where i can get a replacement for the lcd screen on my xda... its totally mashed and i need to unlock it but the screen is bad...
i live in uk... any ideas guys..
pls help out
has anyone give me pls an idea how much a new replacement screen for XDA might cost
currently I am having two XDA (one XDA and one MDA), MDA has a broken screen ... I'd like to know how much is the material (screen), I have so. to do the actual job of screen replacement
regards, monika
I replaced my touchscreen a few weeks ago. Like Lawrence said it's a little tricky and you need to be patient.
I bought my touchscreen from www.pdasmart.com/pdaphone.htm for $75 and they gave great instructions.
thank you for your kind answer
hmmm, seems like it is nice to live in US ... where all the things for XDA are almost readily available :wink:
regards, monika
Protective Acryclic Cover over the Digitizer
I have an odd problem. I have an SX56 with a broken protective cover. The protective cover is the acrylic sheet that sits between the digitizer and the outside world. Everything else works fine including the digitizer. I have found every replacement part except that cover. I've even tried local plastic stores. They don't carry the proper thickness (0.125mm).
Any thoughts or sources besides sending it in for a $200 repair?
Hello. Like 1 week ago i had an exam and we did put phones in a class.I finished exam,i took phone and i went home.After 4-5 hours, i was using my phone and i rotated it to be in landscape and i saw that display is scratched / broken.Possible to be scratched because i feel a line on top phone (not on display) near samsung watermark,or possible to be scratched + broken.Let's say that is a scratch.In that day when i saw it,this scratch was up to half the screen in the diagonal.After 1-2 days, this scratch went until bottom left (in diagonal) lol.So,I'm thinking that is broken,but I'm not sure because it feel just like a scratch.The display is working fine,i don't have any problems.
So,my question is,is there any solution to make scratch "invisible",to dissapear?I saw on youtube some videos with i**** or other phones,but i didnt tried,in one of the videos was used banana lol.I won't buy another screen,i think it will cost around 100€...I wanted to sell my phone for like 100€.But now with that scratch...
PS: If i could find the guy who did this...I will request him 250€ (the amount which i paid for s advance),i will broke his phone and i will punch him
Rob, there's no real method to remove a scratch or fix a broken glass... The only option available is to change the touch screen part (dangerous for display if you are not expert) or the whole assembly (touch screen+display+middle body)
I remember once I had "Displex" paste, really fixed scratches but it's only for plastic (like non-touch phones), basically is a polish paste (don't use on glass, otherwise will be full of scratches)
My advice is: punch him if you find who did this
Inviato dal mio GT-I9505
Unfortunately that is not a scratch but a crack. Our display is composed of 4 layers. Display, touch, silicon, gorilla glass. Your glass is cracked. Fact is that you can buy glass really cheap (10e) but technology/tools (needed to remove and apply silicon) to replace it is not cheap. You could try to find out if anyone in your city does this kind of repair but I doubt that they will charge less than 50e. Good thing is that crack will not affect function of your phone in future, but obviously you cannot sell it for 100e any more.
HI.
I've unfortunately caught my XT890's screen with what was probably a set a of keys and have pushed the frame away from the glass at the Sim and SD card slot so that there is approx. a 4 mm gap between the glass and the frame ( the sealant is visible).
The phone's screen continued to work perfectly for about a day until I pushed the frame back into place and appear to have done some damage as the screen slowly stopped working - I had a section of black that appeared at the top of the screen and slowly crept down the screen, which went purple first then black , creeping down the sides of the screen first, then filling in the middle until the full screen is black. I think I've also lost the digitizer input, as I can no longer turn the 6am alarm off on it.. and I can't take out the battery either :S
I've "rebend" the frame to the original damage, but this has had no impact in reverting the screen to "usable".
The glass looks complete - no cracks or anything, so I'm really not sure if replacing the glass screen and digitizer pre-build as a "frame" will fix the problem, or not. At ~£30 for the part on a phone worth ~£70, I'd like to understand if its' worth the risk or just to buy a replacement outright.
Has anyone had similar experience with this?
lol, never seen that before. Looks like the liquid inside the screen slowly dropped out and damaged some internal parts. This will certainly needs replacements. But unless u can do it your self i would consider buying a new one.
How did u bend your phone sides on the first place? (i never tried it, but it seems very sturdy)
I have absolutely no idea how I managed this - I was up a ladder at the time and must of inadvertently put a leatherman or keys in the same pocket as the phone and then "trapped" it so that it pushed sideways on exactly the weak spot of the simcard slot. I'll upload a picture of the damage for prosperity.
I didn't think AMOLED had liquid in them, but that would correlate with the affect I had - it must of been a tiny, tiny hole :S.
Such as shame after 2 years of perfect operation - and I had hoped for another year instead of procuring a new phone as it did the job so well.
Yep, I'm happy to replace it myself, I've done 4 or 5 screens on a Defy before, and this looks simpler.
PS - it looked very similar to the pictures in this, so that's positive in some ways!
http://forum.xda-developers.com/showthread.php?t=2456966
I cracked my screen and bought a new with digitizer. was very easy to replace just follow the youtube video about disassemble razr i.
You will also need some glue though for the stupidly placed motorola logo..
i bought mine from ebay for less than 20 euro. but it has some wierd greenish color in the top where the statusbar is. its not visible when holding the phone vertical. but when holding horizontel its alittle noticeable. not a problem at all but just be carefull going for the cheap ones.
This morning I was cleaning my phone (getting rid of the finger prints/smudges) while standing up when it slipped out of my hand and hit the tiled floor. Everything is fine except the screen (which is cracked). Screen works fine but is unresponsive no matter where I press or touch the screen. How much does a Z3 Compact replacement screen cost? I searched around and it seems it is about $100?
Screen replacement costs in Poland +/- 135$
(authorised sony service)
Yes' it's hard to get original one cheaper than 100-120$. You can search for some Chinese replacement cause sometimes it looks quite similar to original one but You must check it before buying. Last time I had a client with Z1c replacement screen which he bought for 40$ and there was no white color, everything what should be white was purple.
Voids warranty, cheap replacement
Got mine from here replacebase dot co dot uk (can not post links ), of course you void your warranty if you do it yourself.
Parts are good quality till now. I advice to order a back glass too, I broke mine when taking it out and had to reorder again (costs approx 6 pound).
Next time just heat up back glass with hair dryer and You wont break it.
Chamelleon said:
Next time just heat up back glass with hair dryer and You wont break it.
Click to expand...
Click to collapse
Thanks for the input
The problem was a small crack which did not matter until you have to remove it, you can not pull on it when its cracked. Anyway I will use a hair dryer to put it back together (assemble, heat up, press with books).
Thanks for the replies.
I'll be getting the repair done from the official Sony shop/distributor I bought the phone from. Just wanted to get an idea of how much it "should" cost before I approach them.
m4mbax said:
Thanks for the input
The problem was a small crack which did not matter until you have to remove it, you can not pull on it when its cracked. Anyway I will use a hair dryer to put it back together (assemble, heat up, press with books).
Click to expand...
Click to collapse
Hello
I have tried to change my backglass 3 times but after a few hours the glass falls off... (Yes, I cleaned the phone removing all the old adhesive - and yes, I had pressure on it over night ) But all the instructions I have found on the internet never mentioned anything about putting the glass on, and HEATING it up, and the putting pressure on it... Where have you found that advice? You could imagine that heating up would ruin the adhesive/making it thinner and thereby not waterproof...? But on the other hand your succesrate probably beats mine...
Foxhunter123 said:
Hello
I have tried to change my backglass 3 times but after a few hours the glass falls off... (Yes, I cleaned the phone removing all the old adhesive - and yes, I had pressure on it over night ) But all the instructions I have found on the internet never mentioned anything about putting the glass on, and HEATING it up, and the putting pressure on it... Where have you found that advice? You could imagine that heating up would ruin the adhesive/making it thinner and thereby not waterproof...? But on the other hand your succesrate probably beats mine...
Click to expand...
Click to collapse
I think it was a comment below the iFixit tutorial. But one big warning here, I did extra maximally stupid and put it to 'press' under my table (with books around it). The table was too heavy and cracked my front screen once again :crying:
+ The rear glass sits fixed and has not loosened.
- Don't put too much pressure or you destroy it yet again like stupid me
m4mbax said:
I think it was a comment below the iFixit tutorial. But one big warning here, I did extra maximally stupid and put it to 'press' under my table (with books around it). The table was too heavy and cracked my front screen once again :crying:
+ The rear glass sits fixed and has not loosened.
- Don't put too much pressure or you destroy it yet again like stupid me
Click to expand...
Click to collapse
Doh!!! ? I have also read on Ifixit and can see there are different opinions about if it is nessesary to heat or not. But I think I will follow your advice and heat the new back before putting it under (less pressure) ?.
Another thing I read on Ifixit is that someone writes that you should put on an adhesive sticker - eventhough the new back comes with adhesive already on...? What is your advice on this?
Most pre-glued adhesive stickers on back are useless. Now everytime I change back in Xperia Z, Z1, Z2, Z3 and compacts I need to remove pre-glued sticker and change it to original one. Many times I had complaint on it from my clients saying that back glass came off. So it's better to order original back glass or just original adhesive.
Foxhunter123 said:
Doh!!! I have also read on Ifixit and can see there are different opinions about if it is nessesary to heat or not. But I think I will follow your advice and heat the new back before putting it under (less pressure) .
Another thing I read on Ifixit is that someone writes that you should put on an adhesive sticker - eventhough the new back comes with adhesive already on...? What is your advice on this?
Click to expand...
Click to collapse
Good
Mine came with the adhesive ON the screen, I used that one, I didn't have a separate one. Be extra careful when 'placing' the adhesive where it belongs because you can not remove it once place (okay maybe slightly). Its important that it fits on the first to first and a half try. More adhesive means thicker layer --> glass will stick out
Anyway, most of the stories you read online are partially BS, the phone will work even when the glass is a tiny bit loose or when the adhesive rotated and is a bit thicker in one place. In my eyes, when you dared to order, you are very much capable of assemble the parts.
In btw, ordered new glasses today, hope my two left hands fix it this time.
PS: A lesson I learned on a friends Galaxy S2, do NEVER EVER try to use force when something sticks or is not as loose as in a video. Google or ask another person maybe you just dont do the trick. A connector didnt want to come off so we used a lever to lift it, CLICK, the place where the lever levered broke the board... :silly:
Edit 1: I think its not necessary to HEAT it, it just has to be a lil bit warmer than in your pocket or when calculating heavily. 30s under a hairdryer will be more than enough i guess.
Forgot to update this thread. I received my fixed phone last week. They replaced the screen and even the "bumpers" around the phone for $98. They even delivered the phone to my home free of charge. Looks brand new, all the minor dings I had on the phone are gone.
On another note, I also bought my first iPhone. Got an Space Gray iPhone 6s 128 GB with the official/Apple leather case for the 6s. Got it last Thursday. Been playing around with it a lot and, overall, I love it. Deciding on whether to keep my Z3 Compact as a back-up phone or just sell it. But geez, does the iPhone 6s load games and other apps fast (thanks to its NVMe storage).
So, long story short, I've had my Moto z3 play for exactly 30 days now, last night I dropped it from MAYBE, 3 feet off the ground and it landed face down, front screen is cracked / spider-webbed all over, just wondering what experiences anyone has between Motorola doing a repair, local repair shops, and doing it yourself... I don't have the accidental damage insurance Moto offers, but I love this phone and have to figure something out..
Any input would be GREATLY appreciated...
Wish I could help, but I got no info to share except that when/if you get a new one . . . TEMPERED GLASS SCREEN PROTECTOR! Saved me a few times.
bdizzle1686 said:
So, long story short, I've had my Moto z3 play for exactly 30 days now, last night I dropped it from MAYBE, 3 feet off the ground and it landed face down, front screen is cracked / spider-webbed all over, just wondering what experiences anyone has between Motorola doing a repair, local repair shops, and doing it yourself... I don't have the accidental damage insurance Moto offers, but I love this phone and have to figure something out..
Any input would be GREATLY appreciated...
Click to expand...
Click to collapse
The screen is very simple to replace I had to replace it when I shattered my screen. Bought one off eBay I think for 50$. Just use a heat gun to loosen the adhesive on the sides. Took me about 15 minutes to do.
Just an update, got it replaced at a local phone repair shop, pretty happy with it other than 1 issue, when I power off the phone, then power it back on, the screen is completely black, even though I can hear the hello Moto boot animation, and can feel the vibrations when I touch the screen. However, if I boot to recovery/bootloader mode and THEN power it on, the screen works just fine. Anyone have any ideas?
Cleanser2012 said:
The screen is very simple to replace I had to replace it when I shattered my screen. Bought one off eBay I think for 50$. Just use a heat gun to loosen the adhesive on the sides. Took me about 15 minutes to do.
Click to expand...
Click to collapse
I broke my screen after a week (phone is nice but isn't durable at all).
I'm worried about screen quality. If I get a replacement, are they all the same? Or are some better? It wasn't as bright as I'd hoped to begin with so I don't want it to get worse.
stovo06 said:
I broke my screen after a week (phone is nice but isn't durable at all).
I'm worried about screen quality. If I get a replacement, are they all the same? Or are some better? It wasn't as bright as I'd hoped to begin with so I don't want it to get worse.
Click to expand...
Click to collapse
The only difference I've noticed is that on my new replacement screen, it doesn't have the Motorola/Moto lettering logo on the front bottom chin of the screen, as it originally did, other than that I haven't noticed any difference in quality, brightness, etc..
Sorry about your phone. Same thing happened here - phone fell like 2 feet (with a screen protector) and bam, done. A new screen didn't help in my case. I replaced the fpc connector as well and nope, no go. These phones are extremely fragile. I say abandon ship, bite the bullet and get a new phone.
burnxtc said:
Sorry about your phone. Same thing happened here - phone fell like 2 feet (with a screen protector) and bam, done. A new screen didn't help in my case. I replaced the fpc connector as well and nope, no go. These phones are extremely fragile. I say abandon ship, bite the bullet and get a new phone.
Click to expand...
Click to collapse
Think I may do the same. Have my moto x4 for a backup. Other than freezing up (which I could probably fix) it's not bad. I really wanted the amoled screen, but very disappointed with the brightness in daylight. Plus I don't want to pay $50+ only for it to not work as yours did. Isn't worth it imo. Which is to bad since I really like the moto interface.
Anyone know of a good replacement?
Any phone is apt to have the screen shatter without a case when dropped, while that doesn't help I want to link a video showing the Z3 Play screen is not that easy to break. The Poetic Karbon can be had for less than $10 which gives adequate drop protection it seems.
fivefour said:
Any phone is apt to have the screen shatter without a case when dropped, while that doesn't help I want to link a video showing the Z3 Play screen is not that easy to break. The Poetic Karbon can be had for less than $10 which gives adequate drop protection it seems.
://youtu.be/_PlQvqznx4k
Click to expand...
Click to collapse
This is true. When I dropped and shattered mine, (64gb Moto Z3 Play Unlocked) I had just purchased the device 5 days prior from Target (they had it on clearance for $150, and they screwed up big-time, they had it listed as the 32gb variant, even though the box specifically said 64gb lol), anyways, I dropped it with NO case, and NO screen protector, onto concrete from about 3 feet off the ground..
However, now I have the Lenovo official aluminum bumper case that's compatible with mods, as well as a tempered glass screen protector, and have dropped it at least 4 or 5 times on a hard wood floor, from about 5-6 feet up, and has not even affected it...