Hi,
I succeed to use Android auto wireless with my phone (Honor View 20 Android 10) and my car (Kia Niro EV with Head Unit Reloaded application). But I need to manually start the Head Unit server on my phone.
It stays running until I reboot my phone. So every day, I have to manualy start the server. That's ennoying.
Is there a way to have the head unit server automatically started at boot time or when it connects to car bluetooth?
Thanks.
Hey, haven't logged in here for years
I had a similar problem and I ended up using Tasker app on my phone with an AutoInput extension. There is a "state" condition. So when the phone enters this state (connection to my car bluetooth in my case, but you can set the trigger to anything else you want) it opens the AA settings, clicks on the three dots menu and then clicks on the "start AA server".
Then when I disconnect from the car bluetooth (phone exits the "state") it does the same actions and turns the server off.
In my case I also use this routine to turn on WiFi and hotspot to connect to my HU but that's because of my particular setup...
The only problem, it can't be done in the background (at least on my unrooted Google pixel) so the routine actually opens the app and fakes your finger taps, so the device has to be unlocked and in proper orientation mode (otherwise fake finger taps will click in a wrong place). But that all can be automated too with the Tasker app.
I've heard there is also an AutoMate app that can do the same thing, but I'm just more used to the Tasker workflow))
Toug said:
Hi,
I succeed to use Android auto wireless with my phone (Honor View 20 Android 10) and my car (Kia Niro EV with Head Unit Reloaded application). But I need to manually start the Head Unit server on my phone.
It stays running until I reboot my phone. So every day, I have to manualy start the server. That's ennoying.
Is there a way to have the head unit server automatically started at boot time or when it connects to car bluetooth?
Thanks.
Click to expand...
Click to collapse
My car radio is ATOTO S8 pro, wich support android auto and carplay with wired or wireless, and I reaaly want give it a thumb for how fast they connect to and work each time, maybe you can have a try.
By the AutoMate and root.
BT is always on. Check BT connected to car. SU command open to AA server. Open the phone of Hotspot.
When BT disconnect. AutoMate can close Hotspot and AA server.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
If you have both - here is what you can do. Open ashtray, put two rubber stoppers on both sides at the bottom, plug cable, done
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks nice
Looks nice.
Do you use the internal GPS or an external one ?
pgerr said:
Looks nice.
Do you use the internal GPS or an external one ?
Click to expand...
Click to collapse
Internal GPS
I have an RS6 with RNSE bluetooth....
When I pair Athena and RNSE BT then they both find each other and works fine as handfree headset profile.
But when Athena is connected with RNSE BT, it wil auto disconnect and then connect again after few second and repeat the cycle.
I found that if I disable the power safe mode form Athena and will solve the prblem....
Does any one have a solution for this?
Thanks!
parkertseng said:
I have an RS6 with RNSE bluetooth....
When I pair Athena and RNSE BT then they both find each other and works fine as handfree headset profile.
But when Athena is connected with RNSE BT, it wil auto disconnect and then connect again after few second and repeat the cycle.
I found that if I disable the power safe mode form Athena and will solve the prblem....
Does any one have a solution for this?
Thanks!
Click to expand...
Click to collapse
I do. I can trade my A3 to your RS6 and problem will be solved jokes a side, sorry I don't know since I don't have built in BT in my car
ID64 said:
I do. I can trade my A3 to your RS6 and problem will be solved
Click to expand...
Click to collapse
I can't understand why he didn't go for this?
parkertseng said:
I have an RS6 with RNSE bluetooth....
When I pair Athena and RNSE BT then they both find each other and works fine as handfree headset profile.
But when Athena is connected with RNSE BT, it wil auto disconnect and then connect again after few second and repeat the cycle.
I found that if I disable the power safe mode form Athena and will solve the prblem....
Does any one have a solution for this?
Thanks!
Click to expand...
Click to collapse
You might like to try changing the bluetooth stack from the MS one. Haven't tried that on my Ameo yet (but used to do it on my Exec) so can't help as to whether it will work.
apd said:
You might like to try changing the bluetooth stack from the MS one. Haven't tried that on my Ameo yet (but used to do it on my Exec) so can't help as to whether it will work.
Click to expand...
Click to collapse
what other bluet. stack use? what link? I have been trying other one from universal but there is some problem with the software compatibility.
beginner said:
what other bluet. stack use? what link? I have been trying other one from universal but there is some problem with the software compatibility.
Click to expand...
Click to collapse
Try asking one of the Exec developers (eg Midget or Jwright) - they may be able to to help or direct you to a compatible version of the Widcomm stack
After upgrading my radio firmware and having the latest IGO8 installed, I tried having it auto configure TMC. After awhile, it said 'TMC Hardware found' and moved to a 'TMC Station Settings' screen. Since TMC is not used in Canada (?) I cannot test anything.
Can anyone else who has a similar setup and lives somewhere that TMC is used, try having IG08 Auto-Configure the TMC hardware, and report back with their results?
Radio firmware = 1.00.25.08
IGO8 v 8.0.0.49545
Daren
Wow that sounds quite interessenting.
Unfortunatly I have uninstalled iGO 8 on my device and kept on working with TT7. So I am not able to test it at the moment.
I might try it with TT7 today.
Greetings...
Protocol?
What protocol did iGO find?
Can you scan radio channels?
I have the same iGO version with .05 radio and it didn't find TMC for me.
My Igo8 found TMC too, but no Channel scan. I use the 1.03.25.18 Radio, but I think it finds the FM Radio, even with headset put in no TMC Signal.
Ghostrider
Here also TMC is detected now!
Tried automatic channel-scan with headset plugged in, but no signal was found... :/
I also cannot chose FM-Frequencies manually:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Protocol: Siliconlab
Port: COM3
Same problem, "No TMC Signal"
You have to plug in the headphones because the lead is the antenna.
i have the same problem like capsman and fhsieh.
it does not work also with headset
same, "no signal"
(headset plugged in)
it doesn't start to search, or do anything, so I think it won't work in this way.
Here the same on a Touch Pro. Same protocol and port number, but no signal and no tuning possible Maybe we need som xda-developer to hack the Radio module in our phones..
I've got a touch pro (fuze) and it doesn't find any tmc hardware. anyone have any suggestions on this?
I just got this tablet but it is having a problem with the bluetooth. It connects with all of my controllers (Moga pocket, ouYa, and nyko play pad. It does not lose connection. But the controllers no longer react after 9 seconds.
Did you happen to find a fix for the bluetooth issue? I have the same problem using a microsoft bluetooth mouse. I even checked the demo unit at best buy and it did the same thing. Still think I am going to keep the tablet, but I do like to use a mouse when I have it on my desk at work. It just seems to lock up after 10 to 60 seconds but stays connected. If I disconnect it and reattach it works for another 10 seconds.
nanopacket said:
Did you happen to find a fix for the bluetooth issue? I have the same problem using a microsoft bluetooth mouse. I even checked the demo unit at best buy and it did the same thing. Still think I am going to keep the tablet, but I do like to use a mouse when I have it on my desk at work. It just seems to lock up after 10 to 60 seconds but stays connected. If I disconnect it and reattach it works for another 10 seconds.
Click to expand...
Click to collapse
Silly idea here, go into the power saving app and turn the smart saver stuff completely off and try the bluetooth devices again... I do not use bluetooth on my tablet yet, but do have an ouya controller so I can try it later today...
Good idea, but unfortunately no luck. Turned power saving off and it still freezes. I will y around some more and see if I can find any other settings that may help.
I didn't get a chance to try the ouya controller with my ME572C last night. It is unfortunate that the power savings change didn't do the trick. I was assuming that the power saving setting was turning off bluetooth to conserve power and that is why the bluetooth was stopping...
i heard in an other forum that the wifi and bluethoot are in the same chip and that the can jam each other, I also couldn't fix the problem with my controller , i hope there is coming a solution
I played around a bit and if I restart my tablet with Bluetooth connected, then i use my mouse and it freezes. I can go into my menu/apps settings and see the bluetooth share app running. (Sometimes even with bluetooth on and my mouse connected the bluetooth share app wont show up in settings ) Then I disable the a2dp service in the bluetooth share app and my mouse instantly unfreezes and works fine for a lot longer, then the service seems to restart itself again and it freezes. Now trying to figure out a way to keep the a2dp service disabled. But cant disable the app as it is needed, but just need to disable a2dp service. Anyways will poke around some more today. If anyone knows how to disable just a service in an app please let me know.
I found a fix for it. I discovered with my speedlink myon gamepad that it doesnt work when i have a fully charged controller. Try to fully charge it. Then when you go to sleep let it on in connection mode when the it flashes fast. And try the next morning ito connect it. It workw fine now by me and i dont charge it more than 30 minutes when i want to play with it
My ouya controller had some disconnection issues at first but I was struggling with the configuration in the emulator I was trying to run. It appears to work fine now. Although my testing is not all that thorough.
nanopacket said:
Now trying to figure out a way to keep the a2dp service disabled. But cant disable the app as it is needed, but just need to disable a2dp service. Anyways will poke around some more today. If anyone knows how to disable just a service in an app please let me know.
Click to expand...
Click to collapse
There are many apps that you can try, but two apps come to my mind when speaking of disabling services : "disable service" and "my android tools". An alternative could be using "lucky patcher" app which can reassemble apks with removed components if you know which one to remove :
Disable service :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lucky patcher :
Mmmmh don't know what I've done (actually I disabled A2dp service) but my bluetooth seems to be ko now and I can't get it to work by reversing my actions... ?
Disabling services didn't work for me, but the new lollipop update has fixed it. So far anyways, been using the mouse for 10 min with no issues. Happy so far.
moga hero and asus memo pad 7 hd
Hey guys I just bought a asus memo pad 7 hd planning to run all my emulators on it, but im having issues with my moga controller....I try to set it up like how i did with my phone but the only thing it does is move the mouse/pointer around on the screen. I cant set my controls for anything, even the moga games wont work with the controller. .... any advice guys?
Hi guys,
When playing audio via bluetooth on certain bluetooth speakers, the music would stop halfway. I thought the walkman app was broken at first, but when playing videos on Youtube, this happened.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have quite the number of bluetooth speakers/headphones, and so far only two actually causes this problem; Azustar SoloBEATS and iHome iBT4
Even my generic made-in-China, no-particular-brand bluetooth headphones work nicely on my phone.
Anyone know what's wrong with my phone?
Bumping up this thread
fatimmortal said:
Bumping up this thread
Click to expand...
Click to collapse
It must be something with those particular devices.
I can use Walkman BT streaming to my headphones, to my car system, to my home system and to my JBL speaker, with no problems at all.
And my Pebble watch can control Walkman (pause/play/prev/next/...).
Edit: I recently found that JBL speaker volume control from the phone doesn't work. But other devices (like car system, hi-fi, headphones, ...) volume control does work.
D5803 with 5.0.2 stock (Nordic)
yeah it's probably just those devices. I use bt with my Sennheiser headphones and bt speaker all the time with no issues
I can confirm odd behaviour on bt with my Xperia z3c...
On kitkat 4.4.4 it would randomly crash bt-share if audio was played back on my WHD Soundwaver. Pc playbavk was fine.
On LP 5.0.2 (up to .28) the phone would start to act up after a while... Pc volume control was also lost (playback was fine).
Switched to xperia z1c, where it worked in the shop (fw 4.3). Updated it to Kitkat/lp to find the same issues as on xperia z3c. Now sporting cm11 kitkat 4.4.4 and no probs on my z1c. Probably gonna go back to z3c and wait for cm12, since z1c has this obnoxious content adaptive backlight control.
Edit:
So now back on z3C and latest LP Firmware (.28). As expected BT not correcty working with my Soundwaver and the bluetooth stack on my PC does not recognize a2dp-service at all (However, it don't work with my iPad either). Hope sony fixes this; for now I guess we're stuck with DLNA to play wireless music correctly.
Hi,
When I updated my pixel 7 in January 5 "Security update" it never a pair Bluetooth with car .
The notice appeared "Bluetooth connection failed. Verify the passcode and your phone settings." , but I'm sure about passcode was correct.
I tried every step following:
-Forget and reconnect
- Rest Bluetooth
-Developer options then change AVRCP Version from 1.5 to 1.3,1.4....etc
-Last Factory rest
I used another phone to connect it connect without any problems, but the pixel 7
passing code Not accept my car.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Scropion_7 said:
Hi,
When I updated my pixel 7 in January 5 "Security update" it never a pair Bluetooth with car .
The notice appeared "Bluetooth connection failed. Verify the passcode and your phone settings." , but I'm sure about passcode was correct.
I tried every step following:
-Forget and reconnect
- Rest Bluetooth
-Developer options then change AVRCP Version from 1.5 to 1.3,1.4....etc
-Last Factory rest
I used another phone to connect it connect without any problems, but the pixel 7
passing code Not accept my car.
View attachment 5816257
Click to expand...
Click to collapse
Known issue.
There is workaround, You need to start any call then connect to the bluetooth of the car after you hangout it should stay connected to the bluetooth of the car.
Delete the phone from your car's system and start the entire process over.
MarioHWahba said:
There is workaround, You need to start any call then connect to the bluetooth of the car after you hangout it should stay connected to the bluetooth of the car.
Click to expand...
Click to collapse
This works but doesn't reconnect after the car has been off. Has anyone got it to stay permanently? Ta
technotika said:
This works but doesn't reconnect after the car has been off. Has anyone got it to stay permanently? Ta
Click to expand...
Click to collapse
Unfortunately you need to do it everytime
Hopefully google solve this bug with the next update
MarioHWahba said:
Unfortunately you need to do it everytime
Hopefully google solve this bug with the next update
Click to expand...
Click to collapse
Or you could plug it into the car via USB instead of fighting with the Bluetooth. I know that defeats the purpose of a fix for Bluetooth, but it's an easy work-around in the meantime.
About to test this ...
Fixed!
Hello, Can someone confirms the february update BT fix ?
I dont want to update and downgrade one more Time
Maybe you can't see my posts, tested and problem gone (for me anyway)
technotika said:
Maybe you can't see my posts, tested and problem gone (for me anyway)
Click to expand...
Click to collapse
Yes i have seen, but between 'official' announces and reality...
Thanks for your test and confirmation
Obviously was device based as I NEVER EVER had any bluetooth connection issues.
And I´m using BT a lot!
But feels good anyway they fixed a problem others had...may have eventually affected me some time.