So I recently rooted my Vivid. I have been trying to replace the lock and unlock sounds with root explorer, but I have no idea where the system sound files are. They aren't in the system media folder like before, because I tried replacing the sound files there but it didn't work. Does anyone no where those sound files are?
Hi guys
sometimes you hear a sound coming from smartfone and you do not know what it is
I think there have been found for A solution for
for people with low vision and blindness
I've already made three with one voice files.ogg
Click on it to listen one that says (your battery charging now) and (your battery is low) and (Your battery is full) instead of a sound
here I have a flash zip with these two. ogg files
https://dl.dropboxusercontent.com/u/24472656/Themas/Media.zip
Installation
download the file and put it on your sd card go to recovery navigate to the file and flash the zip
(You must have a root device)
You can also make your own .ogg file type here what you want to make and download the file right mouse click on the audio player when you're done go to here to the file to convert online from wav-to-ogg
when you're done you change the name in which you want to replace
The files can be found in system / media / audio / ui
Hi all,
I recently brough MI3, everything about phone was good except volume from headphones were very low,
Since many review called it as "Apple of China" i expected lot about volume,
I found a thread miui.com about volume increase,
Normally i done it by editing snd_soc_msm_2x file in my previous s4 mini and xperia sp but MI3 doesn't have it,
The file which has to be edit is "system/etc/mixer_paths_3_2_forte"
Steps:
1. Root your device
2. Download any root explorer
3. Goto to "System/etc"
4. Open "mixer_paths_3_2_forte" file
5. In that file Search for "<path name="headphones">"
6. Below that there will be two line
<ctl name="RX1 Digital Volume" value="84" />
<ctl name="RX2 Digital Volume" value="84" />
7. Change value to higher as per ur needs, i set "90"
8. Now save that file and Reboot your Phone.
Alternatively,
Copy that file "mixer_paths_3_2_forte" to pc,
Edit with Notepad++
Replace again in "system/etc" by overwriting old one
Or,
I have attached Edited file which is set to "value=90"
Just download and replace it.
You can change other values like speaker and other anc-headphone or earpiece volume also.
I really don't what other files regardless of "mixer_paths_3_2_forte" of same name do.
Enjoy.
BEFORE YOU REBOOT YOUR PHONE MAKE SURE THAT FILE HAS PROPER PERMISSION "rw-r-r", ELSE YOU WILL END UP WITH BOOTLOOP
I found this method at http://www.miui.com/thread-1836269-1-1.html.
All credits goes to original OP of that Thread.
Not works on latest firmware, Can some one post original file of it.
This works fine, been using it since I got my Mi3 around the start of the year. I also change the the hphl and hphr volume from between 35-50 and change the TI PA Gain value from between 30-50 anymore and in will sound awful. But that will increase the volume a notable amount.
Thanks for that, works OK for me!
How to increase microphone volume in calls?
No sound for I've done this mod.
I've tried to edit file manually and set the value to 90.
When I restart "no volume" and the settings > sound application is crashing.
I've tried to copy and paste your file too and same thing.
Finally I tried to restore the file "source copy & source paste" and same error occur.
Is this an encoding problem ?
I do not know how to restore the original file and I have no more sound at all on my Xiaomi .
I am using the dev rom (build number : KTU84P).
ftyteca said:
No sound for I've done this mod.
I've tried to edit file manually and set the value to 90.
When I restart "no volume" and the settings > sound application is crashing.
I've tried to copy and paste your file too and same thing.
Finally I tried to restore the file "source copy & source paste" and same error occur.
Is this an encoding problem ?
I do not know how to restore the original file and I have no more sound at all on my Xiaomi .
I am using the dev rom (build number : KTU84P).
Click to expand...
Click to collapse
Check the permission is properly set for the file, it should be rw-r-r
I checked it already but something appear to be strange with perms on xiaomi mi3.
I see rw-r-r but when I try to edit the file it tells me that "file is read-only. Do I want to set it read/write to edit".
I reply all, set my update 84 => 90 then save and exit.
Reboot ... no sound and Settings => Sounds is crashing.
I did not try furthermore and I flashed it my MI3 with the new dev rom.
Sound back and I did not try to modify the file again.
By the way thanks for your help.
please can you write what i need to change to increase speaker soung. (ringtone, music or everything via speaker)
What should be edited in the file to increase in-call volume? TIA!
Can you increase music volume similarly ?
vasiulla said:
Hi all,
I recently brough MI3, everything about phone was good except volume from headphones were very low,
Since many review called it as "Apple of China" i expected lot about volume,
I found a thread miui.com about volume increase,
Normally i done it by editing snd_soc_msm_2x file in my previous s4 mini and xperia sp but MI3 doesn't have it,
The file which has to be edit is "system/etc/mixer_paths_3_2_forte"
Steps:
1. Root your device
2. Download any root explorer
3. Goto to "System/etc"
4. Open "mixer_paths_3_2_forte" file
5. In that file Search for "<path name="headphones">"
6. Below that there will be two line
<ctl name="RX1 Digital Volume" value="84" />
<ctl name="RX2 Digital Volume" value="84" />
7. Change value to higher as per ur needs, i set "90"
8. Now save that file and Reboot your Phone.
Alternatively,
Copy that file "mixer_paths_3_2_forte" to pc,
Edit with Notepad++
Replace again in "system/etc" by overwriting old one
Or,
I have attached Edited file which is set to "value=90"
Just download and replace it.
You can change other values like speaker and other anc-headphone or earpiece volume also.
I really don't what other files regardless of "mixer_paths_3_2_forte" of same name do.
Enjoy.
BEFORE YOU REBOOT YOUR PHONE MAKE SURE THAT FILE HAS PROPER PERMISSION "rw-r-r", ELSE YOU WILL END UP WITH BOOTLOOP
I found this method at http://www.miui.com/thread-1836269-1-1.html.
All credits goes to original OP of that Thread.
Click to expand...
Click to collapse
Also you can use ViPER4Android to do this and also change a lot of different setting to improve audio quality.
I don't if it works with call volume though.
Hi guys here's my mixerpath file. This is boost your speaker and headphone volume. Please backup your stock "mixer_paths.xml" file.
It reques root
Im tested on my phone, E6603 and Marshmallow(6.0) rom.
I thing it's actually works on E6653 devices BUT im not tested yet. THIS IMPORTANT
HOW TO ;
1 - Backup your stock file; (you need the root explorer, ""es file"" or ""root explorer"")
Go to "/system/etc" folder and copy "mixer_paths.xml" to sd card. (This is your stock file please keep it)
2 - Boost your volumes;
Download this file and put in your device. Than copy and go to "/syatem/etc" folder and paste it.
Than change permissions to "-rw-r--r--"
Rebot phone and enjoy !!
(Sorry my bad English)
ramone01 said:
Hi guys here's my mixerpath file. This is boost your speaker and headphone volume. Please backup your stock "mixer_paths.xml" file.
It reques root
Im tested on my phone, E6603 and Marshmallow(6.0) rom.
I thing it's actually works on E6653 devices BUT im not tested yet. THIS IMPORTANT
HOW TO ;
1 - Backup your stock file; (you need the root explorer, ""es file"" or ""root explorer"")
Go to "/system/etc" folder and copy "mixer_paths.xml" to sd card. (This is your stock file please keep it)
2 - Boost your volumes;
Download this file and put in your device. Than copy and go to "/syatem/etc" folder and paste it.
Than change permissions to "-rw-r--r--"
Rebot phone and enjoy !!
(Sorry my bad English)
Click to expand...
Click to collapse
Hey bro, the music stops after 1 minute playing with all the volume on headphones, do you think you can fix that? Lowing one level or two please
Can I try this on latest firmware (.224) ?
korom42 said:
Can I try this on latest firmware (.224) ?
Click to expand...
Click to collapse
yes backup your old mixerpaths first
worked on E6683 but i dont know if it louder or not. it seem you removed warning message when adjust louder volume hearing with headphone ?
could someone please post the original file for .224 ?
Edit : I found it somewhere
Edit : Can you please make version with a slight volume boost because with this the sound is very very loud . even with 1 volume step still loud . It would be nice if you can make one . @ramone01
cheers,
IMy secondary mic has very low volume. People can't hear me in calls. I forgot to backup.
So, could someone give me the original file mixer_paths.xml and mixer_paths_i2s.xml for Xperia Z5 Dual E6683 please?
I'm trying in every way to edit the file mixer_paths.xml located in vendor -> etc to increase the volume of my phone in capsule and speakerphone (with the headset the volume at maximum is not very high but enough), but I can not get write permissions on the file, any root browser returns an error.
Can someone help me to perform the operation?
HarryCustom said:
I'm trying in every way to edit the file mixer_paths.xml located in vendor -> etc to increase the volume of my phone in capsule and speakerphone (with the headset the volume at maximum is not very high but enough), but I can not get write permissions on the file, any root browser returns an error.
Can someone help me to perform the operation?
Click to expand...
Click to collapse
you could try from TWRP otherwise x-plore with superuser mount writable selected has always worked for me although I'm not sure if I've tried it on this phone.
3mel said:
you could try from TWRP otherwise x-plore with superuser mount writable selected has always worked for me although I'm not sure if I've tried it on this phone.
Click to expand...
Click to collapse
TWRP nothing I've tried, but nothing. Also x-plore: I tried changing the permissions and editing the file, it says it completed the operation, but then recheck or open the file and it didn't do anything at all