Related
I'm on my 5th day with the case, the case provides the best protection for drops and scuffs but does have a few downfalls.
Pros:
-Sleek Design, doesn't add bulk like Bodyglove.
-Waterproofs and protects ports.
-Scratch proof screen protector like ZAGG.
-Easy install and removal.
Cons:
-Screen protector installation was botched 3 times, if you mess it up like I did by getting dust on the sticky side run it under cold water and apply it wet then remove air bubbles and water with a rag.
-Screen protector bends too easy, a corner is bent upwards.
-the silicon sections of the case collect alot of dust.
-Notification light blocked if its sitting down flat.
-No grip on surfaces like body glove.
I got it for $25 on newegg including shipping. No regrets.
wcgbmd said:
I'm on my 5th day with the case, the case provides the best protection for drops and scuffs but does have a few downfalls.
Pros:
-Sleek Design, doesn't add bulk like Bodyglove.
-Waterproofs and protects ports.
-Scratch proof screen protector like ZAGG.
-Easy install and removal.
Cons:
-Screen protector installation was botched 3 times, if you mess it up like I did by getting dust on the sticky side run it under cold water and apply it wet then remove air bubbles and water with a rag.
-Screen protector bends too easy, a corner is bent upwards.
-the silicon sections of the case collect alot of dust.
-Notification light blocked if its sitting down flat.
-No grip on surfaces like body glove.
I got it for $25 on newegg including shipping. No regrets.
Click to expand...
Click to collapse
i would buy one in a heart beat if they came out with a hip holster for it. I always had otterbox cases on my blackberries.
Did you get a commuter or an impact case?
Use a belt holster for the Samsung Moment.....same size as Hero with Otterbox
xxwckdxx said:
i would buy one in a heart beat if they came out with a hip holster for it. I always had otterbox cases on my blackberries.
Click to expand...
Click to collapse
i have one but the silicone ruins it for me collects to much dust
i just hate how plaisticy the back case is...i prefer my seidio personally
Yeah, the otterbox is great, but its a dust magnet.
-------------------------------------
Sent via the XDA Tapatalk App
Ordered mine on Ebay yesterday for 12$. When you guys bring up dust are you talking about it getting dust on the case itself?
reedsw said:
Ordered mine on Ebay yesterday for 12$. When you guys bring up dust are you talking about it getting dust on the case itself?
Click to expand...
Click to collapse
In general, soft silicone rubber attracts dust due to static and then holds onto it. The Otterbox has the interior silicone liner that shows around the edges of the snap-on outer hard case.
If you're the type that carries the phone in your pocket, the rim around the screen will tend to grow hair. If you carry it in a holster (I have a generic Case Logic one meant for a Blackberry), you shouldn't have an issue.
reedsw said:
Ordered mine on Ebay yesterday for 12$. When you guys bring up dust are you talking about it getting dust on the case itself?
Click to expand...
Click to collapse
No, on the sides of the screen. It happened to me when I had my Body Glove case.
HeroMeng said:
No, on the sides of the screen. It happened to me when I had my Body Glove case.
Click to expand...
Click to collapse
Ah, yes I also had this issue with the body glove case. I don't have an issue right now though with the Otterbox.
For the dust issue there is a really easy fix, rub it off with your fingers it only takes a few seconds. Its a minor annoyance but nothing that makes the case not worth it. So far everything has been great with the case.
wcgbmd said:
Ah, yes I also had this issue with the body glove case. I don't have an issue right now though with the Otterbox.
For the dust issue there is a really easy fix, rub it off with your fingers it only takes a few seconds. Its a minor annoyance but nothing that makes the case not worth it. So far everything has been great with the case.
Click to expand...
Click to collapse
I don't actually OWN the otterbox, but I do want one.... time for an ebay search
I have had my otterbox case (commuter) for my hero for a month and a half now and love it. The case was kinda a bit thing for me as I work at a pizza joint (where we toss our own skins and make our own dough) so flour everywhere is a huge part of everyday for me. Flour has not been nice to my phones in the past completely plugging up virtually every hole available on my phones. So huge selling points for the otterbox was the cover over the headjack and usb port which work like a charm. It does collect dust in the corners but much better to have it collect there than where it can do harm. with a good screen protector on I can cover the speakers from flour also. The case feels natural in your hand and more like a part of the phone than something bulky covering it. It comes in two parts and its easy to take apart yet never comes apart with out you removing it. I pull it off and clean the small build up dust and flour every couple of days and it looks brand new again.
Well thats my review of the case. Oh yeah, one more thing for people who want one, I got mine from amazon.com shipped for $25 flat. So just incase your like me and kinda lost faith in ebay or what have you $25 on amazon is a good deal considering both otterbox.com and the sprint store sell these cases for around $50
The Otterbox Rocks!!!
I mean it!! Ok, let me tell you why!
Ive been skateboarding for a longtime and the things I've done to phones you wouldn't believe!
Ever since I got this otterbox I've thrashed my hero quite a few times from dropping it off my lap getting out of the car, falling on it from takin a crash on my board2, falling off the top of the car.
& it sat in a heavy ring of water for about 30 mins....I had no idea..lmao. Needless to say no water damage to the phone it self. Every opening ie covered and with a full scale screen protector you can make the phone look brandnew anytime you want.
I highly recommend this case! It's protected my phone ALOT!! I still have it
-------------------------------------
Sent via the XDA Tapatalk App
Picked mine off ebay for 13$. Seems to be good. Got a piece of something under the screen cover and I have a little circle off screen so no big deal. If I put the phone in my jean pocket it is covered in lint when I remove it =) Little tape or some rubbing and it all comes off.
This is my first rubber case for a phone I have owned and I have to say its pretty nice. Full functioning usb, volume, headphone jack, lights and camera while protecting the phone... cant really ask much more than that right?
Had my Otterbox case (Just Impact not Commuter) for about a week now, absolutely thrilled with it. Fits better than my wifes generic brand case, Screen protector is great, even after one failed attempt. Only gripes I have: Picks up any dust or lint or anything extremely easily. Grabs onto my jean pockets a bit too much, pulls them out a little bit. But those small complaints aside it's a great case and a great deal considering the screen protector is included.
bbv203 said:
Use a belt holster for the Samsung Moment.....same size as Hero with Otterbox
Click to expand...
Click to collapse
Where did you get the holster. I want to do this too.
http://www.seidio.com/index.html
i searched there website.....i dont see where they sell anything for the samsung moment, especially a belt holster??? because Im very interested in this as a well......
sorry to be a buzzkill but otterbox.com has the hero one for 34.95 but still, 10 bucks is a savings regardless!
Ok so i dont think many of us are impressed with the current available cases for out n7's
we seem to have to pick between protection-price-visual appeal.
we dont seem to have a case with all 3 .
so im implying my project idea,
im goin to check in at my old high school. where i remember in "Design&tech" we used "vacuum forming" machines to heat hard plastic sheets and re-mould them into covers and shapes over a pre-made wooden mould.
im goin to put forth an idea to create a case from shock-absorbent hard plastic front and back that either clip or screw closed. the next part of the project would be to imply some kind of clear glass screen area. one that conducts touch-responsiveness, good for display, and scratch/shatter resistance,.
im thinking after a few attempts we may be able to pre-cut the required "pattern" to perfectly fit to each edge while heat-moulding if so would could then attempt cutting the button/rocker area's then re-attaching them with a stretchy silicone between the actual button cover to make a professional finish to the buttons
so we would end up with a Hard shock resistant Full back/corner surface cover with clear scratch resistant full screen glass face and silicone set button rockers and attached plugs to insert into usb/headphone ports to keep out dust.
this is a 1 hour idea so far do you guys think its worth pursuing?
im think the school maybe interested as if this project works and can be made at a cheap price they could look into marketing it.
i would make sure xda'ers get a discount thou lol :good:
i too hate all the cases. ended up settling for a fitfolio which provides the protection i want without covering the edges of the screen.
however, the ideal case i think would be one that provide protection for corners, silver bezel (just the silver bezel, not wider), and raised edge for front protection. an added bonus would be a sturdy kickstand like the ones on the trident kraken case.
does it have to be hard plastic?
i think TPU material would be better for shock absorption.
TPU
I have an idea, we buy one of these or similar, then 2 small magnets in the nexus 7 back plate, then make a magnetically attached flap, like in the ipad
http://www.cruzerlite.com/cases/asus/nexus7/cruzerlite-androidified-clone-army-for-asus-nexus-7
Sagar96 said:
I have an idea, we buy one of these or similar, then 2 small magnets in the nexus 7 back plate, then make a magnetically attached flap, like in the ipad
http://www.cruzerlite.com/cases/asus/nexus7/cruzerlite-androidified-clone-army-for-asus-nexus-7
Click to expand...
Click to collapse
I like the idea, and maybe add groves in the front flap so we can stand the device up to watch movies too?
chismay said:
Ok so i dont think many of us are impressed with the current available cases for out n7's
we seem to have to pick between protection-price-visual appeal.
we dont seem to have a case with all 3
Click to expand...
Click to collapse
If you want to design one yourself go for it and let us see the results but don't try to get consensus on what is ideal because you will be waiting forever, you can't make a case that's all things to everybody.
NewbCentral said:
I like the idea, and maybe add groves in the front flap so we can stand the device up to watch movies too?
Click to expand...
Click to collapse
Im just wondering if i mount magnets in the inside of the back cover on the left hand side, will it affect any of the electronics (they will be mounted near the corners so it doesn't trigger the magnet switch. Then i can get my mom to sew me a flap with magnets, and have a legit apple style "smart cover"
need a waterproof case to protect our LG G4 when diving
i'm looking for the same thing
otherego said:
i'm looking for the same thing
Click to expand...
Click to collapse
any recommeded?
I have no G4 at the moment.. Just want to buy one. The availability of a waterproof case makes the difference. Lifeproof planned to build one for s6.. But right now g4 is my favorite buy.
I suppose at this point you need to look for a universal case such as this one http://www.amazon.com/JOTO-Universa...Motorola/dp/B00LBK7OSY/ref=zg_bs_9375358011_1
Up to 30 meters and fits phones up to 6 inch diagonal - if it fits the iPhone 6+, it'll fit the G4
There's tons of them on Amazon but that one looks like it's the bestseller with a very good rating.
I would like a lifeproof-like one
Those bag cases are the best waterproof cases
LancerV said:
Those bag cases are the best waterproof cases
Click to expand...
Click to collapse
show me link?
Please post your link when you recommend.
@sever-barre
Are you reading through your thread?
I posted a link of a bag case. You think maybe he was referring to that?
Okay, will visit it
If you don't want to spend $100, Tanga sells universal velcro pouches. I capsized a canoe last weekend and it saved my phone. They are cheap but they work and for that price, you don't care if you lose them. At 2 for $9, you really can't go wrong.
https://www.tanga.com/deals/cde80f2...cord?internal_campaign=front_page_daily_deals
Hi!
Anybody seen something similar to this?
http://www.dx.com/p/protective-sili..._medium=club&utm_campaign=club_skureview_page
for LG G4? Waterproof case would be awesome. I hate those bags so I don't even look at them
this might be an option
http://www.ebay.com/itm/LOVE-MEI-Sh...t=LH_DefaultDomain_0&var=&hash=item4197e40eb4
I have the Joto pouch linked in this thread for my G4. The transparent window fits the G4 size perfectly. It is thick enough that you could put in a few credit cards and cash or key. Now the bad part is that the touch screen works well as long as the bag is dry. As soon as you go underwater or if the bag is really wet, the touch screen is mostly unresponsive. You might get lucky and get a few touches in but definitely no swiping action. I could use the camera by double tap the down volume button and take pics using the down volume button, but that's about it. If you are looking to check your email under water, forget about it. Oh and because you cannot tap to focus, the underwater pictures do not come out that great. Here is a pic of my pool vacuum in action.
This universal waterproof case http://www.witrigs.com/universal-waterproof-case-for-smart-phone-acid-blue is what i am using. And it's cheap now.
superbonto said:
this might be an option
http://www.ebay.com/itm/LOVE-MEI-Sh...t=LH_DefaultDomain_0&var=&hash=item4197e40eb4
Click to expand...
Click to collapse
This case is NOT waterproof. I bought it from Amazon, which stated it was waterproof and I knew it wasn't to begin with because I had the same case for my LG G2. It is, however, one of the most durable cases I have ever owned.
Does the case can floating on the water?
nadram said:
I suppose at this point you need to look for a universal case such as this one http://www.amazon.com/JOTO-Universa...Motorola/dp/B00LBK7OSY/ref=zg_bs_9375358011_1
Up to 30 meters and fits phones up to 6 inch diagonal - if it fits the iPhone 6+, it'll fit the G4
There's tons of them on Amazon but that one looks like it's the bestseller with a very good rating.
Click to expand...
Click to collapse
Does the case can floating on the water?my girl friend buy a case for iphone 6 and her waterproof case cannot floating on the water...
Hard to find a waterproof case for G4,otterbox and arozell Tank could be a solution, yet from my experience both are not water-resistant instead waterproof,the difference is waterproof support diving into water and water resistance is for unexpected water such as rainwater and water splashing, so firstly you have to get to make it clear that what exactly your request.
Besides,lovemei powerful could be another solution for water-resistant,yet the love mei case would be a little bit akward with its triple protective design, some one may think there comes a bulky, yet its performance on protection is outstanding if you don't care the additional bulky as well as tiny mobile signal missing.
Arozell Tank: http://www.arozell.com/lg-g4-tank-armor/
Otterbox Defender: http://www.otterbox.com/en-us/lg-g4/defender-series/lgx2-g4.html?dwvar_lgx2-g4_color=20
Love Mei: http://www.lovemeicases.com/love-mei-powerful-for-lg-g4/
Has anyone found something. I routinely check around each payday but after going through tons of "waterproof" cases which are actually "water resistant" and not waterproof... I'm not looking for a bag, but a case...
Just got the Supcase today. It comes with 3 interchangeable back plates. The case looks like a cross between an Otterbox Defender and a Spigen Slim Armor. It comes with a built-in screen protector, but I removed the portion covering the display since I already had a screen protector installed. The top portion of the protector around the front facing camera is still present. It also has plastic protectors over the rear camera, laser auto-focus, and led flash. Similar to the front protector, they're likely easy to remove, but I chose to leave them on.
I mainly got it for the port covers since the G4 will be in dusty environments. The port covers appear to be staying in place fine. However, some people on Amazon have reported that the port covers don't stay in place with their leather-backed G4. The case has a layer of black mesh over both mics and the IR blaster. The earpiece and back speaker are also covered. Audio still comes through fine. In addition, the back buttons are covered, but they remain easy to press. Not easy enough though where you have to worry about accidental presses while in the pocket.
Keep in mind that water resistance is not the same as water proof. This case is not made to be in water. I attached some pics to this post, but more can be seen at the imgur link below.
LG G4 Supcase
Extra Info: This case does seem to work fine with a tempered glass screen protector. Without actually installing the tempered glass and just laying it over the display, the case was able to close fine.
Nice one. Tnx
How is the side grip and do you find the case significantly thicker than other cases? Thanks for the great pictures!
DarkMage619 said:
How is the side grip and do you find the case significantly thicker than other cases? Thanks for the great pictures!
Click to expand...
Click to collapse
I would say the side grip is pretty good. The tpu section along the sides has a matte finish.
At the moment, I only have two other cases for the G4. One is the Neo Hybrid and another is a thin clear tpu case. It is definitely thicker than the Neo Hybrid, but I wouldn't consider it too bulky of a case. I can still use the phone fine one-handed with the Supcase installed. I attached a pic below comparing it to the Spigen case.
That looks just like a Otterbox Denfender with some extra features. The back cover's I don't care for changing out but I can see it's a nice added feature to some. I like on the back how it covers up everything nice and close compared to the Denfender like the Camera and everything that is nice. I also see it has like a mesh those parts I might try to do something with my Otterbox like that also seen it on the bottom mic. I work in construction and just hate to to get the G4 trashed, I was able to keep my Note 2 for over 2 years in perfect condition with an Otterbox Defender but did require me cleaning it 1x a week to get the dust build up out around open inputs. I was going to keep my Note 2 and just change Sims in the morning from phone to phone but that's a PIA the Defender Note 2 case is really hard to get off compared to the G4.
Does this case come with or can you buy Belt Clip Holster for it ? I'm waiting on what Zero Lemon Releases for the G4 hopefully sooner than later since I will most likely just get that since it's mostly a Otterbox with extended battery and belt clip.
BDestroyer8418 said:
That looks just like a Otterbox Denfender with some extra features. The back cover's I don't care for changing out but I can see it's a nice added feature to some. I like on the back how it covers up everything nice and close compared to the Denfender like the Camera and everything that is nice. I also see it has like a mesh those parts I might try to do something with my Otterbox like that also seen it on the bottom mic. I work in construction and just hate to to get the G4 trashed, I was able to keep my Note 2 for over 2 years in perfect condition with an Otterbox Defender but did require me cleaning it 1x a week to get the dust build up out around open inputs. I was going to keep my Note 2 and just change Sims in the morning from phone to phone but that's a PIA the Defender Note 2 case is really hard to get off compared to the G4.
Does this case come with or can you buy Belt Clip Holster for it ? I'm waiting on what Zero Lemon Releases for the G4 hopefully sooner than later since I will most likely just get that since it's mostly a Otterbox with extended battery and belt clip.
Click to expand...
Click to collapse
Check out my thread on the unicorn beetle supcase. Comes with a holster. May be more inline with what you're looking for.
BDestroyer8418 said:
Does this case come with or can you buy Belt Clip Holster for it ? I'm waiting on what Zero Lemon Releases for the G4 hopefully sooner than later since I will most likely just get that since it's mostly a Otterbox with extended battery and belt clip.
Click to expand...
Click to collapse
It doesn't come with a belt clip holster and I'm not sure about compatibility with other holsters. The other Supcase Mike mentions does come with a belt clip so you could check that one out. It may not provide as good protection from dust as the case I reviewed, but it's still certainly rugged.
I contacted them they said they don't sell the Holster on it own and the holster is just for the Beetle case.
BrunoSlivar said:
Nice one. Tnx
Click to expand...
Click to collapse
Here it is with the tempered glass fully installed. Case still closes fine :good:
Just wanted to say I picked this case up along with the Beetle Case that has the belt clip. The Water Resistant Case does indeed work the the Beetle belt clip it is a snug fit but it does lock down with the screen side facing in just like the Beetle. It also locks in good with the Otterbox Defender belt clip when the screen is facing in. It will not lock down with screen out on the Otterbox clip but it would be fine if you were just using the belt clip with the kickstand on a table.
Between the 2 Supcase's not sure which one I liked better will do some testing but at first I would say the Water Resistant Case I could really do without the removable back covers and rather just have something like the Beetle and that would be great. I also see on the Leather back it left 4 little marks on the bottom of the leather back. I would have to take pictures to really show what and why it caused it but it's not a big issue to me you could barley see it and I'm sure a small file would fix the issue. At first the button port cover's did not close all the way too fix that just pull on them a little and they lock in fine. I could see this becoming my daily case for work or atleast when we work outside or in really dusty conditions which is often.
Compared to the Defender it's hard to tell since I've had the Defender since Week 1 and these cases for 1 hour. Hands down the G4 Defender is the best Otterbox case I've had or seen in person. Most my friends don't use cases or they just use a slim case so I'm comparing it to my Note 2 and past phones. The fit and everything for the G4 Defender is good. The Belt clip adds a little more bulk to the overall size compared to the Beetle or Water Resistant case with the belt clips that's because the Otterbox is designed to lock the phone in both ways Face in and Face out. I never really use the belt clip with Face out unless I am using the kickstand to watch a video and 90% or more of the time I'll just hold it or lay it some other way since it's usually to vertical with the clip.
The Beetle is nice as well but I'm not sure if it just my case or if it's from the Leather back but I find the rubber shell not locking in really tight on the right side if I were to just run my finger off the side of the case it would come undone like you were trying to remove the case. Also it doesn't have that little cutout on the bottom right corner like the Water R case I found that a nice feature to remove the case. I will try again without the back to see if it helps at all. I still haven't removed the Plastic Screen protectors on these 2 cases so that might help since I already have a temper glass one on.
If I was looking right now and didn't already have the Defender then both of the Supcase's are great for similar feature's and slightly less bulk if you use a belt clip . I always use the belt clip to help protect the screen I just clip it on my pocket of my pants. Since you can get both of them for cheaper then just the Defender case it wouldn't be bad idea to get both. I also seen a few eBay sellers that had the Water R case with Free ship for about $12 were I got mine alot better than Amazon price.
I will for sure keep the Water R case but will have to decide on the Beetle in a few days. If anything I will be keeping it just for the Belt clip if I don't really like it unless Supcase will sell one or fine one for cheap but hate to keep it for the belt clip only when I bought it for $19 and the Water R case only for $12.50 even together less than $32 is not a bad deal at all. Just hate having collection of case's sitting around since I will most likely be getting a Extended Battery to use at times as well.
fast update - the beetle does fit the correct way without the leather back I will try some more with the leather back to see if it might just stretch a little over time.
Also Wireless charging working fine with all 3 case's.
Although this looks so tempting, unfortunately I am too worried to use such cases. Especially after my Water resistant Z1 got water damage! and that phone was sealed!
emiratesson said:
Although this looks so tempting, unfortunately I am too worried to use such cases. Especially after my Water resistant Z1 got water damage! and that phone was sealed!
Click to expand...
Click to collapse
Not sure about that phone but this case is really just meant for splashes of water. Basically any case that cover's the port's would be the same but this one covers up your camera lens so should help to take a little more water than other Water R case's but they should never be submerged in water .
I did find 1 issue with the case on taking pictures with a flash atleast Indoor's in low light haven't tried it elsewhere. If taking a picture in landscape with the top of the phone on left hand the bottom left corner and top right a little has a shadow to the picture's like the flash doesn't get all the way through or something hard to explain. In portrait it I did not see it happening. Also with No flash it did not happened in either mode.
il buono said:
Here it is with the tempered glass fully installed. Case still closes fine :good:
Click to expand...
Click to collapse
Can you please tell me which tempered glass screen cover you have on your LG G4? Thank you.
emiratesson said:
Although this looks so tempting, unfortunately I am too worried to use such cases. Especially after my Water resistant Z1 got water damage! and that phone was sealed!
Click to expand...
Click to collapse
As I mentioned in the OP, water resistant is not the same was a water proof case. This case is not meant to be in water. As mentioned by @BDestroyer8418, this case just protects from splashes.
dgator said:
Can you please tell me which tempered glass screen cover you have on your LG G4? Thank you.
Click to expand...
Click to collapse
It's the Yootech tempered glass
il buono said:
As I mentioned in the OP, water resistant is not the same was a water proof case. This case is not meant to be in water. As mentioned by @BDestroyer8418, this case just protects from splashes.
It's the Yootech tempered glass
Click to expand...
Click to collapse
are you a reviewer that have the right to have thing to review for free ?
I have this case and the other supacase with the holster this case also fits the holster as well and clips in securely.
Sent from my LG-H815 using Tapatalk
Someone use some waterproof case with this case?
My G4 powered by Supcase with Nillkin tempered glass
powered by LG G4
Miketoberfest said:
Check out my thread on the unicorn beetle supcase. Comes with a holster. May be more inline with what you're looking for.
Click to expand...
Click to collapse
I have both cases and can confirm it small snugly into the holster it's a perfect fit
BDestroyer8418 said:
That looks just like a Otterbox Denfender with some extra features. The back cover's I don't care for changing out but I can see it's a nice added feature to some. I like on the back how it covers up everything nice and close compared to the Denfender like the Camera and everything that is nice. I also see it has like a mesh those parts I might try to do something with my Otterbox like that also seen it on the bottom mic. I work in construction and just hate to to get the G4 trashed, I was able to keep my Note 2 for over 2 years in perfect condition with an Otterbox Defender but did require me cleaning it 1x a week to get the dust build up out around open inputs. I was going to keep my Note 2 and just change Sims in the morning from phone to phone but that's a PIA the Defender Note 2 case is really hard to get off compared to the G4.
Does this case come with or can you buy Belt Clip Holster for it ? I'm waiting on what Zero Lemon Releases for the G4 hopefully sooner than later since I will most likely just get that since it's mostly a Otterbox with extended battery and belt clip.
Click to expand...
Click to collapse
Sent from my LG-H815 using Tapatalk
If i take the screen protector will it lessen thw case's watsr resistance?
I think there are real big problems related to the lack of good accessories for S7 edge.
Facts:
- The best OEM protective cover (at least in my opinion) – the Leather Cover is nowhere to be found, only in pictures; there are several weeks of estimated delay for this product all over the world!
- The slim Clear Cover (transparent back cover) is mediocre designed, you should test them carefully before buying! Margins are awfully finished (very rough), the case comes already with scrathes on the transparent inner part (just like the case of S6 edge) and the lateral support (added also for lateral protection, a new redesign vs the one for S6 Edge/ Edge+) is very shaky, making the use of this case an absolute awful experience! At this price and with such high expectations, this is outrageos
- For the non-OEM cases: many have really big problems of proper compatibility and there must be 2 alternative reasons for this:
Samsung has made a “last minute” redesign (eg: on top, a possible switch between the extra microphone hole vs the sim tray position)
Samsung has rushed things too much and the non-OEM suppliers for accessories have failed this rythm... Even SPIGEN has big problems, there are many clear rumors that they have recalled all their accessories for the S7 Edge delivered to the market (you can start by checking amazon USA – there is no Spigen product for S7 edge!). The biggest problem: the clasic Neo Hybrid case, where the lateral polycarbonate frame was way too loose... Also the Rugged Armor, way too loose.... you should check reviews and facts including here on the forum!
- I must add that it-s a huge dissapointment regarding the non-existence of the Glossy Cover that was available for S6 Edge+, what a pity! And that design was clearly much much better and what a beautiful slim-line!
What do you think? What have you experienced?
I agree with your points on the Samsung cases. I think they could have been better. I have the Clear View and whilst it's an adequate case, it feels very loose. The front flap doesn't magnetically lock in place which I thought it really should. It's UI feature hasn't been implemented well.
I disagree with the Spigen comments. I have two Spigen cases and have had no issues with misalignment or them being too loose. In fact quite the opposite. I have two Spigen cases and one more on order. The two that I have in hand are:
Slim Armor Air
Neo Hybrid Crystal - Gunmetal
Both are seriously tight fits. The latter being tighter then the former. Whether the issues you mention are limited to a particular market, I don't know. But certainly Amazon UK still have all S7E products from Spigen.
I've also got the Spigen Thin Fit on order from Amazon.
Chris_c81 said:
I agree with your points on the Samsung cases. I think they could have been better. I have the Clear View and whilst it's an adequate case, it feels very loose. The front flap doesn't magnetically lock in place which I thought it really should. It's UI feature hasn't been implemented well.
I disagree with the Spigen comments. I have two Spigen cases and have had no issues with misalignment or them being too loose. In fact quite the opposite. I have two Spigen cases and one more on order. The two that I have in hand are:
Slim Armor Air
Neo Hybrid Crystal - Gunmetal
Both are seriously tight fits. The latter being tighter then the former. Whether the issues you mention are limited to a particular market, I don't know. But certainly Amazon UK still have all S7E products from Spigen.
I've also got the Spigen Thin Fit on order from Amazon.
Click to expand...
Click to collapse
The OP isn't wrong about Spigen's cases having fitment issues; take a look at my case OP if you want to see pictures of what he's referring to. On the other hand I disagree with why they're out of stock everywhere. This is speculation: Spigen likely had to revise one thing or another hence why they had a sale to clear inventory. Spigen's done this before, so it would not be surprising to see it happen again. I've seen then revise cases randomly, and then not tell anyone that they changed the case design. Spigen had never recalled a case, but I think it's certainly plausible they're revising the line up. I know my screen protectors from them had issues, and the new ones won't ship until the end of the month (maybe the cases will too). Only time can tell at this point, so there's no reason to really speculate further.
Ordered 2 spigen ultra hybrid's on amazon - 1 was loose on the sides not gripping phone and the other is slowly becoming loose.
Ordered 2 spigen neo hybrid cases on ebay. Silver has the loose PC frame the gold seems OK for now.
I will be contacting Spigen to see about replacements or if there are known fitment issues and if they are working on fixing them. I've had mostly spigen cases in the past with 0 issues. Hopefully this gets fixed.
Pilz said:
The OP isn't wrong about Spigen's cases having fitment issues; take a look at my case OP if you want to see pictures of what he's referring to. On the other hand I disagree with why they're out of stock everywhere. This is speculation: Spigen likely had to revise one thing or another hence why they had a sale to clear inventory. Spigen's done this before, so it would not be surprising to see it happen again. I've seen then revise cases randomly, and then not tell anyone that they changed the case design. Spigen had never recalled a case, but I think it's certainly plausible they're revising the line up. I know my screen protectors from them had issues, and the new ones won't ship until the end of the month (maybe the cases will too). Only time can tell at this point, so there's no reason to really speculate further.
Click to expand...
Click to collapse
I'm not saying the OP or you are wrong, I'm just saying my experience of the cases has been different. Maybe I've just been lucky.
I have a clear spigen and the plastic screen protector is being pushed off. There qare no glqa1ss ones available. And the battery cases not available
---------- Post added at 01:08 PM ---------- Previous post was at 01:07 PM ----------
Edit glass protectors
I'm definitely bummed that you can't get the Samsung leather case they show off on their websites so prominently. I love leather and always thought the Apple leather cases for iPhones felt good and had a nice minimalist look to them, so I was exciting to see Samsung rip that idea off. But since they weren't available at launch, I already have a case now and will question the worth of me buying another one if and when they come out.
I had the clear view cover and returned it mostly because of the fact it disables always on display. Instead i bought the keyboard case from samsung. So far i am happy with it. I always had problems while typing on the touchscreen and with the keyboard its really cool to type. Response on buttonpress could be better specially at the edges (my 'p' gives really bad resonse) and sometimes it acts crazy and the software keyboard or google voice thing is popping up. Also always on display does not work while keyboard is attached at front, but thats ok. The feeling of the case is really nice. A soft rubbered but not to rubby finish. I like it
gtg465x said:
I'm definitely bummed that you can't get the Samsung leather case they show off on their websites so prominently. I love leather and always thought the Apple leather cases for iPhones felt good and had a nice minimalist look to them, so I was exciting to see Samsung rip that idea off. But since they weren't available at launch, I already have a case now and will question the worth of me buying another one if and when they come out.
Click to expand...
Click to collapse
Just the leather one? Not the LED leather one? It's weird because in the UK on the 8th when the S7E was released in the Carphone Warehouse I went in to they had just the Leather case by Samsung not the LED one. Now though, I see the LED leather case everywhere online etc. but rarely see the just leather one anywhere now!
bernd.k said:
I had the clear view cover and returned it mostly because of the fact it disables always on display. Instead i bought the keyboard case from samsung. So far i am happy with it. I always had problems while typing on the touchscreen and with the keyboard its really cool to type. Response on buttonpress could be better specially at the edges (my 'p' gives really bad resonse) and sometimes it acts crazy and the software keyboard or google voice thing is popping up. Also always on display does not work while keyboard is attached at front, but thats ok. The feeling of the case is really nice. A soft rubbered but not to rubby finish. I like it
Click to expand...
Click to collapse
Y'know that's weird. Sometimes 'P' on my touchscreen keyboard can give a bad response. Wonder if this is a common software issue...
I'm a big fan of the Clear Cover. No problems whatsoever and love the corners.
I've had my Spigen Ultra Hybrid crystal clear (ordered from Amazon) on my S7 Edge since March 5th (when the case arrived) and it was a perfect fit. Yesterday I took the case off (my first time removing it) to install my Skinomi screen protector. I put my Spigen case back on this morning and the case went on with the same feel as when I first got it.
All of the official cases are a failure, Samsung's and Apple's equally. I was looking forward to the release of the ARA phone but Google backed down. They released the Pixel which is just an improvement of the other competitor designs. There's nothing new and I am really disappointed in the whole industry. And now the poor excuse of an "official case" for their products. There are so many possibilities for making great cases for the phones. It is like the best car brand starts producing official ****ty tires for their cars. No offense they can invest and make great tires but they don't give a f**k.
On the other hand, I admire small companies that struggle to make great products like I-blades, Nexpaq and partially Otterbox that can continue and improve the modularity paradigm. Google realized that modular phone is a dead end. But they could join projects and release at least modular case for the Pixel.