Related
I dont know how long this has been happining because up to 2 days ago I dident use any bluetooth devices with my phone but I just found out yesterday I was having a problem and after hours of searching and narrowing the problem down I finnaly found that enabling wifi caused my bluetooth range to drop to just a cople inches.
The reason I need wifi is that I dont get anything past "E" were I live and thats not vary good for orb and streaming Movies and TV
The reason I started using Bluetooth is I bought a hands free headset and a BT Gamepad, both of there ranges are 1-2 inches but jump to the correct range when wifi is off.
Someone please correct me if I'm wrong, but doesn't the bluetooth and wifi probably operate off the same sytem in the kaiser?
If I had to guess, it would have something to with your battery. If you have a weak phone signal, your battery has to work harder to keep the call up. Just my guess
Thats another thing to try, try keeping the phone plugged in while you do this and see if the results vary from not having it plugged in.
I actually saw it to vary from ROM to ROM. On XDA Live 2.0, i could never use both simeltaneously. If i turned wifi on, my headset would disconnect. After I made my ROM, i had no problems whatsoever with both coexisting.
It's normal. Both interfaces use the same frequency band and must share it. When one uses a lot of the available bandwidth, the other is likely to be thrown off. Now if people report different behavior between ROMs it might be stuff like the prioritization between the 2 being different, or simply low-level settings like the number of retries in case of failed transmissions (as many of those will occur when both interfaces are used simultaneously) before a packet is dropped/connection is lost.
An example of the other way, if I use my stereo handset to listen to music (bandwidth-intensive), the Wifi will disconnect even if I'm 2m away from the router.
mech_supernova said:
I dont know how long this has been happining because up to 2 days ago I dident use any bluetooth devices with my phone but I just found out yesterday I was having a problem and after hours of searching and narrowing the problem down I finnaly found that enabling wifi caused my bluetooth range to drop to just a cople inches.
The reason I need wifi is that I dont get anything past "E" were I live and thats not vary good for orb and streaming Movies and TV
The reason I started using Bluetooth is I bought a hands free headset and a BT Gamepad, both of there ranges are 1-2 inches but jump to the correct range when wifi is off.
Click to expand...
Click to collapse
Off topic, but which bluetooth gamepads did you get?
Thanks for all your replies
kareem9nba said:
Off topic, but which bluetooth gamepads did you get?
Click to expand...
Click to collapse
its the BGP100 works great with Morphgear Emulator heres a link
http://gizmodo.com/gadgets/peripherals/input/chainpus-bgp100-bluetooth-gamepad-102114.php
Got my One today... Pleased so far until I went for a drive and tried out the bluetooth in the car and found a couple of issues:
1 - Audio keeps cutting out every 15 seconds or so. It'll play, then quickly go quiet, and then work its way back up to regular volume. Really annoying!
2 - The meta data is completely wrong. For example, I was playing a podcast via Doggcatcher, yet the meta data was for a track I'd been playing previously in Google Music.
Tried with Beats Audio on, and off, but didn't make any difference. I have several other phones of different makes/models etc... paired with the car and none of them have these issues.
Anyone else having these issues?
debug77 said:
Got my One today... Pleased so far until I went for a drive and tried out the bluetooth in the car and found a couple of issues:
1 - Audio keeps cutting out every 15 seconds or so. It'll play, then quickly go quiet, and then work its way back up to regular volume. Really annoying!
2 - The meta data is completely wrong. For example, I was playing a podcast via Doggcatcher, yet the meta data was for a track I'd been playing previously in Google Music.
Tried with Beats Audio on, and off, but didn't make any difference. I have several other phones of different makes/models etc... paired with the car and none of them have these issues.
Anyone else having these issues?
Click to expand...
Click to collapse
I had the same issue, turning wifi off seemed to fix it :good:
The meta data issue is a common problem around Android phones I found out so far. I use N7player and on my car radio display it says Load 8.1 from Eisenfunk, but I'm playing I will be heard from Hatebreed. This happens on different phones with stock player installed.
The Load 8.1 from Eisenfunk is loaded in the stock music player, so the problem seems to be, that you have to find a workaround to get player X your standard player and disable everything else. Since I only use N7, I disabled every other player and it seems to work, but its a lazy workaround. Someone should find a fix for this. Maybe I should just use the stock filemanager and try to start a mp3 and than set N7 to default. Maybe this works.
For the BT cutting outs, I didn't recognize those cutouts. Don't ask me what is wrong at your side, I use a Pioneer DEH-X8500BT car radio and my HTC One is in my pocket. Do you have a bluetooth bridge like Belkin or Logitech BT Audio adapter or wireless speakers like Boombox or such thing so check if this happens with them, too? I had a issue once with a Samsung device and my Creative wireless speakersystem with BT connection and it was cutting off randomly until I found out that another app was causing this.
AW: Bluetooth audio issues
I had the same problem too and solved this by disabling the energy-saving-options. With energysaving all dataconnections will be disabled when the screen gets off.
You can also setup the energysavingsettings and disable the turn off from all dataconnections.
Sent from my HTC One using xda premium
AW: Bluetooth audio issues
These are the settings to disable.
Sent from my HTC One using xda premium
debug77 said:
Got my One today... Pleased so far until I went for a drive and tried out the bluetooth in the car and found a couple of issues:
1 - Audio keeps cutting out every 15 seconds or so. It'll play, then quickly go quiet, and then work its way back up to regular volume. Really annoying!
2 - The meta data is completely wrong. For example, I was playing a podcast via Doggcatcher, yet the meta data was for a track I'd been playing previously in Google Music.
Tried with Beats Audio on, and off, but didn't make any difference. I have several other phones of different makes/models etc... paired with the car and none of them have these issues.
Anyone else having these issues?
Click to expand...
Click to collapse
I used to have this problem in 1.28Rom with WifI turn on too, but it fixed in Rom 1.29. :laugh:
How did you get the updated rom?
Spewy1 said:
How did you get the updated rom?
Click to expand...
Click to collapse
I work in Carrier shop in TW and for the Demo unit is already update to 1.29
ant78 said:
I had the same issue, turning wifi off seemed to fix it :good:
Click to expand...
Click to collapse
Thanks for the pointers guys. I installed AutomateIt so that when it connects to my car's bluetooth, it disables WiFi (and then switches it back on when I get out). Seems to work a treat!
HTC asked me to fill in a support call, but by the sounds of it it's hopefully all sorted in the 1.29 ROM Let's hope for a speedy release of it around the world :good:
Not sure what to do about the meta data though. I use quite a few different music apps (Soundcloud, Google Music, Sony Music, and Doggcatcher) so setting one to be default isn't really a solution for me unfortunately.
I'm getting both issues but I saw this thread before I got my phone and knew to turn off the wifi. A minor inconvenience but glad it'll be fixed in the next update.
As for the meta data, I'm using Gone Mad music player (the dev recently put it on sale and I fancied a change from the now-abandoned ubermusic). I can confirm that the track never changed from the first one I played. Haven't yet tried the stock music player, but I do recall that I had a similar issue on my SGS3 when using a combination of stock, ubermusic and google music. Very annoying. I think the same happened in the brief moment I had the Xperia Z too, so I would agree that it's an Android issue, not necessarily a HTC issue.
Hey there,
not specifically related to use with car sets, but I have general BT headset issues. I already tested two of them. I get dropouts every now and then, i.e. I don't hear the one on the other end, plus people absolutely do not hear me most of the time when I use the BT headset - I have to speak into the phone, and even then no sound at times. No problems with my former HOX though. Can anyone confirm? Am I deemed to NOT use WLAN while having a BT headset connected in general?
Thanks in advance .
I've been having audio issues via A2DP - but again only with WiFi enabled. Not a problem in the car as Tasker will turn off WiFi for me. But in my house when using A2DP streaming, I want to use my WiFi.
Let's hope 1.29 fixes, otherwise I might consider a 5Ghz router...
An FYI. When these phones passed through the FCC I was such a geek that I actually read the transmitter testing. There is an affidavit in there about the BT and WiFI radios sharing an antenna and due to FCC restrictions that the two shall never transmit at the same time. All I can devise is they use a very fast radio switcher to ensure both can be on at once. That software that powers the transmitter transfer mechanism must be not optimized. Or worse, the hardware just really cant handle that. This is what happens when you have aluminum. Need to cram as much into antenna spots as possible. The I-phone 5 has the same setup but their software seems to handle it better. Hopefully this is fixed with a ROM release.
F*ck me, that would explain why I was able to make normal phone calls when I am outside my office - there is no WiFi to interfere! I will have to test tomorrow again, but feel a bit irritated about the fact that I cannot use Bluetooth for audio and WiFi at the same time. Thanks for pointing that out again!
jackdforme said:
An FYI. When these phones passed through the FCC I was such a geek that I actually read the transmitter testing. There is an affidavit in there about the BT and WiFI radios sharing an antenna and due to FCC restrictions that the two shall never transmit at the same time. All I can devise is they use a very fast radio switcher to ensure both can be on at once. That software that powers the transmitter transfer mechanism must be not optimized. Or worse, the hardware just really cant handle that. This is what happens when you have aluminum. Need to cram as much into antenna spots as possible. The I-phone 5 has the same setup but their software seems to handle it better. Hopefully this is fixed with a ROM release.
Click to expand...
Click to collapse
If that was true you'd never be able to stream content over Wi-Fi (Hulu, Netflix, Pandora, Spotify) and listen to it over BT. That's done all the time. Wi-Fi and BT both use the 2.4GHz frequency. Maybe the requirement you read applies to via separate antennas which may be why both share a single antenna. Aluminum and wireless signals don't mix. Asus had BT problems with the TF201 because they had to compensate for the aluminum back of the device by amping the Wi-Fi signal to the point it overpowered the weaker BT signal. Since turning off Wi-Fi improves BT performance (and range) something similar may be occurring on the One. With so few devices in people's hands it's too early to call.
Here's the LTE SGS3 for T-Mobile that just passed through the FCC compared to the One.
Hey I hear you and what your saying makes sense. The reality is a featured coding called time sharing. So due to an ultra fast buffering you are actually never transmitting both at once. That means this very well could be the culprit. Don't need to believe me. Check out the first letter from htc in the FCC registration. Clear as day.
jackdforme said:
Hey I hear you and what your saying makes sense. The reality is a featured coding called time sharing. So due to an ultra fast buffering you are actually never transmitting both at once. That means this very well could be the culprit. Don't need to believe me. Check out the first letter from htc in the FCC registration. Clear as day.
Click to expand...
Click to collapse
Well, it's either the radio, h/w, s/w, or interference. The radio can be ruled out because the BCM4335 is specifically designed to reduce radio interference between competing signals. That leaves either something in the way the h/w is assembled, tuning of the radio drivers/settings or interference between the various radios caused by their output settings, antenna size/placement, or the aluminum body attenuating the signals. I guess time will tell which it is and whether or not it's a big deal to the majority of users.
The BCM4335 introduces the newest version of Broadcom's wireless coexistence technology. Handset makers can use this technology on 4G LTE cellular platforms to minimize the possibility of radio interference between Wi-Fi, Bluetooth and LTE, which operate in adjacent radio frequencies. Broadcom's Global Coexistence Interface supports the Bluetooth Special Interest Group's (SIG) LTE coexistence scheme and can be applied to future Broadcom LTE platforms, as well as 4G cellular platforms from other vendors.http://www.broadcom.com/products/Wireless-LAN/802.11-Wireless-LAN-Solutions/BCM4335
Anand described the antenna structure but I don’t really understand whether he’s saying the entire horizontal aluminum strips on the back above and below the line of injected plastic are the antennas or that the design allows the discrete antennas to be more effective.
The One uses the top and bottom aluminum strips for antennas, both of which are actively tuned to mitigate unintended attenuation from being held. There’s a plastic insulative strip in-between the two antennas and the main body. In spite of being aluminum, the One also includes NFC, whose active area surrounds the camera region.
But his comments don’t seem to jive with iFixit’s after their tear down. They seem to be implying the signals are transmitted through the plastic surround which makes sense but limits the transmission area.
The daughterboard remains, but there is still a mystery left unsolved. No phone operates without antennas, and antennas don't transmit signals well through metal walls. Considering that this daughterboard is on the receiving end of the motherboard's antenna cables and sits directly under the plastic bezel at the top of the phone, we're thinking it has something to do with wireless signals. See those three spring contacts along the top of the board? They meet the rear case in an area obscured by the plastic bezel. If we had to guess, that's where HTC put the antennas.
I would like to post the declaration from the FCC site. Its says it and the model of the bt/wifi radio in the device as registered although the part number looks like the phones part number with a few extra numbers. I truly hope this isn't one of those situations where some BT is unaffected because of the other end having better or newer processors. A la modern BMW's. The professional radio BT sucks it. Always drops even the best phone BT. So, if this phone has a nice antenna split tech and can be very fast at switching transmission times, but the other side cant keep up with the chop, we have a long term problem. I cant post the link because I am too new. Sorry.
Using sense 1.28.771.6, bluetooth/wifi work fine simultaneously.
Sent from my HTC One using xda app-developers app
I tried today with WiFi off and must admit that this is the (temporary) solution. I am on stock with 1.28.401.7 and DO have issues with WiFi and BT being used simultaneously. Now I can at least use BT with my headset.
I'm hoping somebody can help me out on this one.
I've gotten the Chromecast setup and working and it works great with video! Unfortunately audio is nowhere near great. It plays audio in a half second burst every two to three seconds... It does it with Youtube from my S3, N2, S2 and my Nexus 7. It also does it from my PC and laptop.
I believe the issue is with my router/modem but I cannot for the life of me figure out how to correct the issue. I would swap it for another but I need it for my internet and it's bridge support is spotty at best.
I am running a Zyxel PK5001z from Centurylink.
Connection speeds are not an issue as I'm averaging 14MB/s down and 1.2MB/s up.
I'm at my wits end and my wife is threatening to make me return the Chromecast! lol I need help fast!
Thanks in advance!
That's pretty odd. Is the PK5001 on latest firmware? I'd say try to bridge it and use a different router for WAN/PPPOE. I work alot with the PK5000's (Similar to the PK5001) and bridging should work fine on your model too.
One thing I discovered is that if you use your device to turn the volume all the way up (ie. from Youtube's app) the sound gets distorted, but when I put the app at like 40-50% and use my TVs volume it was alot better.
Vandam500 said:
That's pretty odd. Is the PK5001 on latest firmware? I'd say try to bridge it and use a different router for WAN/PPPOE. I work alot with the PK5000's (Similar to the PK5001) and bridging should work fine on your model too.
Click to expand...
Click to collapse
I've been playing with it and spoken to zyxel and centurylink and they've concluded there are two issues. One is because multicast is disabled at the hardware level for WAN communication. So I'll never be able to get the Chromecast to work on it as a stand-alone. Bridging is apparently not working as I have a faulty router?
At this point they are going to send me out a new unit. Hopefully this one works... lol
Trying to stream music from Google Play to my Big Jambox over Bluetooth. Sounds like a CD is skipping and then it eventually pauses the music.
tonyf7 said:
Trying to stream music from Google Play to my Big Jambox over Bluetooth. Sounds like a CD is skipping and then it eventually pauses the music.
Click to expand...
Click to collapse
I've streamed it to my car and it was fine
tonyf7 said:
Trying to stream music from Google Play to my Big Jambox over Bluetooth. Sounds like a CD is skipping and then it eventually pauses the music.
Click to expand...
Click to collapse
The only problem I have is the bluetooth in my car is always on. The phone wants to stay connected to it even when I'm in the house. Makes for a frustrating time when I'm doing work in the yard and trying to listen to something. I will plug in the headphones and after a while it will switch to the car's bluetooth.
Short of that the bluetooth connection has been stable and used a lot.
Can anyone help me..
how to connect my Samsung Galaxy tab2 with the nokia Bh-503 Bluetooth headset...
My tab won't connect the nokia Bluetooth device...
So how can i able to connect BH device in my samsung galaxy tab2 gt-p3100..??????????
Sent from my GT-P3100 using XDA Free mobile app
Blue tooth connection issue
Ok, let me be as descriptive as possible to my condition/experience.
I went for a walk today with Droid Turbo in tow, blue tooth connections to my Moto 360 (synced with Run Keeper) and Beats bluetooth earphones, playing a downloaded podcast, to avoid weak signal/streaming issues.
The sound coming thru the connected headphones was choppy, cutting in and out. Not listenable.
I thought the Moto active display were being tripped over and over again in my pocket, causing the choppiness of the bluetooth audio.
I turned off all the Moto active settings, as well as double twist to open camera app.
After turning off all those settings, it seems to play without a hitch. For the first couple of minutes. Then it would alternate between continuous playback and chopped playback, couple minute at a time, back and forth.
I am now done with that walk, sitting down typing this up and bluetooth thru Beats are working flawlessly.
It must be related to motion of the phone as I walk that causes the chopped playback, i dont have a clue.
Anyone have similar and create a setting profile that eliminates this?
Only issue with Bluetooth is with my mazda cx5, connects faster than my note 3, plays well except sometimes with play music the display won't advance to the next song but the song plays. Also sometimes the skip track won't work. Had zero issues with the note 3, hoping the next update fixes these problems. That's the problem with being an early adapter, but love the phone so far, miss having viper4android and pandora patcher, but can live without them, but keeping fingers crossed for root, although I seriously doubt this phone will get it.
Me too
tonyf7 said:
Trying to stream music from Google Play to my Big Jambox over Bluetooth. Sounds like a CD is skipping and then it eventually pauses the music.
Click to expand...
Click to collapse
I had what sounds like the same problem. At first I thought I was getting notifications that would make the Bluetooth connection to my car cut out, but eventually realized that it was indeed garbled and sounded like a CD skipping quietly. I also had horrible battery life and touch screen issues even after a factory reset. Returned it and I'm using my GNex until my N6 shows up.
sleevester said:
I had what sounds like the same problem. At first I thought I was getting notifications that would make the Bluetooth connection to my car cut out, but eventually realized that it was indeed garbled and sounded like a CD skipping quietly. I also had horrible battery life and touch screen issues even after a factory reset. Returned it and I'm using my GNex until my N6 shows up.
Click to expand...
Click to collapse
Fortunately for me the CD skipping stopped. Seems it worked itself out for me. [emoji1]
My turbo has a terrible time staying connected to my pebble, so much so that I'm attempting to set up llama to periodically check for connectivity, and if it finds none, reset Bluetooth and attempt a reconnect.
No audio problems, but I've never tried for more than a half hour or so.
s919rider said:
Ok, let me be as descriptive as possible to my condition/experience.
I went for a walk today with Droid Turbo in tow, blue tooth connections to my Moto 360 (synced with Run Keeper) and Beats bluetooth earphones, playing a downloaded podcast, to avoid weak signal/streaming issues.
The sound coming thru the connected headphones was choppy, cutting in and out. Not listenable.
I thought the Moto active display were being tripped over and over again in my pocket, causing the choppiness of the bluetooth audio.
I turned off all the Moto active settings, as well as double twist to open camera app.
After turning off all those settings, it seems to play without a hitch. For the first couple of minutes. Then it would alternate between continuous playback and chopped playback, couple minute at a time, back and forth.
I am now done with that walk, sitting down typing this up and bluetooth thru Beats are working flawlessly.
It must be related to motion of the phone as I walk that causes the chopped playback, i dont have a clue.
Anyone have similar and create a setting profile that eliminates this?
Click to expand...
Click to collapse
I have this same stuttering problem when I use my LG TONE while everything works fine while connected to my car's radio.
jfassad said:
I have this same stuttering problem when I use my LG TONE while everything works fine while connected to my car's radio.
Click to expand...
Click to collapse
I run regularly with the Turbo in my pocket, with BT Headphones (Motorola H11), BT heart rate monitor (Polar), with Runkeeper app tracking my run and music playing from Google Play music. Works very well. Once in a while, I do get a little skipping (1-2 minutes of skipping on 1 out of every 5 runs?). I do usually turn my wifi off when I'm going for a run. I run by a few saved hotspots, and I think that the skipping is related to wifi attempting to connect to a weak hotspot.
Just curious... The ones having issues with BT connections. Are you by chance connected to Wi-Fi? I've always had issues with Bluetooth on my devices when connected to 2.4ghz WiFi. No issues with 5ghz. They're too close to the same frequency. My note 2014 can't even keep a connection to my work 2.4ghz Wi-Fi and stream over a Bluetooth connection. Drops it every time.
mlr_90 said:
Just curious... The ones having issues with BT connections. Are you by chance connected to Wi-Fi? I've always had issues with Bluetooth on my devices when connected to 2.4ghz WiFi. No issues with 5ghz. They're too close to the same frequency. My note 2014 can't even keep a connection to my work 2.4ghz Wi-Fi and stream over a Bluetooth connection. Drops it every time.
Click to expand...
Click to collapse
Yeah I'm pretty sure that's the issue here. When I first got this phone, music over my bluetooth earbuds would skip like crazy while I was walking across campus. Eventually I noticed that if I set the wifi frequency band to 5GHz only or turned it off completely, then the stuttering would stop. Likely the stuttering was from my phone trying to connect to access points as I walked through campus. So now I just have tasker set up to disable the wifi whenever I'm connected to my earbuds. Not a proper solution but it works for now. Never had a problem like this with my Galaxy S3, though. Hopefully it can be fixed in some sort of software update.
I've had what sounds like skipping, but it only happens when the phone is either connecting or disconnecting from WiFi and I am streaming music, that wasn't uncommon with previous phones though so I wouldn't consider it a Turbo issue. I stream almost every day for a total of about 1-2 hours.
Sent from my XT1254 using XDA Free mobile app
Hey I just posted my experience here http://forum.xda-developers.com/showpost.php?p=57604084&postcount=4 but I'll just copy and paste it to this thread:
Quote:
Originally Posted by Rixanu
Hmmm, I wonder if it's motion based. I'm sitting in my room listening to it now and it's a lot better. Unfortunately that doesn't really solve my problem, though.
----------------
Rixanu - I think you're on to something... I'll give my "story" and hopefully someone a little more savvy than us can help figure it out.
I switched over from the good ole Galaxy Nexus about a month ago. No major complaints on the Turbo yet as we await Lollipop, with the exception of this Bluetooth issue. I have the Bluetooth paired in the car, and a set of headphones - music and everything worked perfectly on the GNex through the Bluetooth. Now, primarily, it's often choppy (mustic anyway) - for reference, when listening to music I listen via Google Play (all access or whatever they call it now). I figured the choppiness was related to the fact that the music was being streamed since most wasn't downloaded yet, but after very limited experimenting, I believe it must have to do with the physical Bluetooth radio. I had noticed in the past that when the music streams perfectly, a lot of times if I pick it up to check an email, text, etc., it becomes choppy, but thought that was strange since the RAM should be more than sufficient to multitask without choppiness. On my way home from a friend's, I played around and stuck my hand over various parts of the back of the phone, and would press the phone against my pant, etc., and could effectively interfere completely with the connection such that it would be only silent, and not even choppy. Yet, while the music wasn't playing, the track continued to playback on the device and when the music would pick up after I moved the phone, it would be 10 seconds or whatever later as if it had been playing straight through the whole time.
I haven't tested this theory too much yet, but I think combined with your issue, there's certainly something there. Unfortunately, I frequent these parts in order to find answers to these types of issues and don't have the solutions myself.
Do we have lemons, or is this issue prevalent?
I'm happy to provide more info to anyone that can help.
Thanks in advance!
Guys user: BIOYAM
Found a fix that worked for him and for me. You can try this:
Install SetCPU (I used a free app No-frills Cpu controll) with Governor: Interactive, CPU: Max 2265MHZ & Min 652
This totally stopped my bluetooth audio issues. Of course you need to be rooted to use these tools.
Hope this helps. :good:
Just an update for all y'all... My brother has the same phone and he's sort of oblivious to these types of issues, so I didn't trust his take on whether he was having the same problem. Anyway, I tested his phone on my BT devices and his phone had no issue whatsoever, even though mine did as I flipped back and forth between a pairing of the two.
Long story short, I called Verizon who connected me through Motorola and they're shipping me a new one, though they required me to put a $500 hold on my cc until I send this POS one back.
Happy Holidays
Yes
I would be happy for suggestions. My bluetooth headphone keeps losing connection to the phone, and then reconnecting. Now, this only happens when I'm not listening, but since I tend to keep the headphones around my neck when I've paused playback I hear the reconnection beeping, it's annoying. When I resume listening the headphone may, or may not be connected.
I've made sure all the other bluetooth devices have bluetooth off, so I don't think the phones are trying to connect to something else. I read in another post that someone thought they might be having trouble because their car bluetooth was always on. I don't know if mine is, but I can tell you it's a pain to connect the phone to the car. Every time I do I need to go through several menus and, of course, this can only be done in Park, so I doubt the car is trying to take over the phone's bluetooth. :fingers-crossed:
Thanks
Since the MM upgrade, my phone has stopped connecting to my BT headphones automatically when I turn the headphones on. I have to manually connect them, by selecting them out of the list of paired devices. Is this just a change in how MM handles BT?
My issues with BT happen with both Lollipop & MM. My Turbo will randomly turn off BT and when I go to turn it back on I see the BT icon flash a couple of times quickly but it never turns back on. I found a remedy for the issues by using an app called Bluetooth Auto Connect but even with that I still have the issues now.
The phone also turns BT on by itself, even after I have manually disabled it
I'm sure the phone knows that it's going to be replaced with a Pixel and is messing with me as much as possible until then.
Any ideas?
Which is your favorite color phone case?
After watching a few YouTube videos I now understand that the dual feature of the Note 8 Bluetooth has nothing to do with Bluetooth 5.
From what I've learned, Bluetooth 5 is simply a combination of Classic Bluetooth (2 & 3) coupled with Extended Bluetooth (high range with lesser throughput), which does NOT mean you can expect to crash n your speaker in the house from the garden.
In other words, for the DUAL Bluetooth feature on the Note 8, it would appear that there are in fact two separate BT reciever / transmitters.
Can anyone verify this?
Also, if this is true, how likely will it be that either a software update or an app will be able to take advantage of this, and split stereo channels to two separate Bluetooth speakers, thus giving true stereo sound in the home?
AddictedToGlass said:
Which is your favorite color phone case?
After watching a few YouTube videos I now understand that the dual feature of the Note 8 Bluetooth has nothing to do with Bluetooth 5.
From what I've learned, Bluetooth 5 is simply a combination of Classic Bluetooth (2 & 3) coupled with Extended Bluetooth (high range with lesser throughput), which does NOT mean you can expect to crash n your speaker in the house from the garden.
In other words, for the DUAL Bluetooth feature on the Note 8, it would appear that there are in fact two separate BT reciever / transmitters.
Can anyone verify this?
Also, if this is true, how likely will it be that either a software update or an app will be able to take advantage of this, and split stereo channels to two separate Bluetooth speakers, thus giving true stereo sound in the home?
Click to expand...
Click to collapse
Why I dunno, ATG! That's a pretty good friggin' question about a thousand dollars phone to ask here, on what's arguably the largest collection of handset-technology educated folks on the Internet.
Ohmagosh, let's see what they say...!
AddictedToGlass said:
Why I dunno, ATG! That's a pretty good friggin' question about a thousand dollars phone to ask here, on what's arguably the largest collection of handset-technology educated folks on the Internet.
Ohmagosh, let's see what they say...!
Click to expand...
Click to collapse
Why I don't know, maybe it does have two BT chips in it. I'm going to guess it does. The delay sucks though for sure.
Meh... I'll take any answer I can get at this point just get the discussion going. Can't believe this hasn't been a major discussion topic yet, and I can't find anything about what I'm asking on the web.
The delay can be remedied by changing placement of the phone between the devices. In other words, from what I've read / heard, no matter how different the two speakers are, there's a theoretical distance between each one that is the ideal placement for the phone where they'll be no lag between the two. I've done this in my own house. I relocated a small table in the foyer to get optimum placement between the dining room and living room speakers.
I have yet to try this with identical speakers to check if midway between them is ideal placement for the phone.
AddictedToGlass said:
Meh... I'll take any answer I can get at this point just get the discussion going. Can't believe this hasn't been a major discussion topic yet, and I can't find anything about what I'm asking on the web.
The delay can be remedied by changing placement of the phone between the devices. In other words, from what I've read / heard, no matter how different the two speakers are, there's a theoretical distance between each one that is the ideal placement for the phone where they'll be no lag between the two. I've done this in my own house. I relocated a small table in the foyer to get optimum placement between the dining room and living room speakers.
I have yet to try this with identical speakers to check if midway between them is ideal placement for the phone.
Click to expand...
Click to collapse
My problem isn't the latency it's the dang volumes. Even with the setting. Can't think of it as I haven't tried in a while. But one of my speakers are as quiet as can be the other is blazing loud. I could never get them to even nearly match...
Surely it's only got one Bluetooth chip just allows more than 1 connection.
No different than having your speakers and a watch connected at the same time 2.
Just 2 audio streams at once
What hasn't Bluetooth allowed more than once bt device gonna had before as long as they used different profiles
I have several speakers, and also two of the same model by the same brand, and until now, I could never get then to play at the same time.
Maybe I should just bitter the bullet and buy a system that splits the stereo channel between two speakers after.
Dual Bluetooth feature means that you can connect with two Bluetooth audio devices at same time and music on the phone will be played simultaneously on the both devices. Left audio channel on the first connected, Right audio channel on second connected.
Switch "Dual audio" via 3dots Bluetooth menu.
Only first device can control (pause/play/next/previos) phone's player.
There is no need both devices to be same brand/model.
Bluetooth version of devices is also not important.
All version are backwards compatible with previous versions. So if your phone is v5, first speaker v4, second v2, so all communications will be on v2.
Even v1 Bluetooth support up to 8 devices multiple (serial) connections. One phone connected to 7 others and gaming multiplayer (Nokia N-gage) . But just now manufacturer deside to make two (audio channels) connection.
ChoSmile, I'm failing to understand...
Are you saying they are already separated into left and right audio channels??
dual Bluetooth has nothing to do with channel separation; all it does is allow 2 devices to be connected to your phone via Bluetooth at the same time, listening to the same exact audio stream
Jammol said:
Why I don't know, maybe it does have two BT chips in it. I'm going to guess it does. The delay sucks though for sure.
Click to expand...
Click to collapse
AddictedToGlass said:
Meh... I'll take any answer I can get at this point just get the discussion going. Can't believe this hasn't been a major discussion topic yet, and I can't find anything about what I'm asking on the web.
The delay can be remedied by changing placement of the phone between the devices. In other words, from what I've read / heard, no matter how different the two speakers are, there's a theoretical distance between each one that is the ideal placement for the phone where they'll be no lag between the two. I've done this in my own house. I relocated a small table in the foyer to get optimum placement between the dining room and living room speakers.
I have yet to try this with identical speakers to check if midway between them is ideal placement for the phone.
Click to expand...
Click to collapse
I play music through poweramp to 2 phillips bt speakers that can connect together anyways. But it's a pain to connect them like that so I just connect them with the dual bt the phone uses. I know what your talking about with the delay so right away I figured out that after they are paired and music starts playing (delayed of course) I simply force close poweramp, go back in and hit play and..... No delay
I'm using 2x Sony Srs-XB10s which natively support stereo pairing themselves, and I dual audio to a Marley with a cheap iPod dock, bluetooth adapter.
There's a ~1s delay from the Sony's when they're in native-stereo mode.
There's ~0.3s delay when they're attached singularly over Bluetooth. This fluctuates, but usually grows to ~0.8s over 2 minutes, then resets.
It's upsetting the audio can't be delayed per-device manually.
I love the technology though and it excited me I could in theory have 5.1 with this solution (Marley is almost a 2.1) but alas it's not mature enough.
Keenly interested in the progress of this feature! Saves the manufacturer having to implement it, though Sony's, despite the bigger delay, is very very simple and obviously there's no delay between their own 2 speakers.