Related
Hi Guys,
May I know what are the steps to flash the rom and also magisk properly? Cuz I have a brand new mi 9 now...
1. unlocked bootloader
2. flash twrp (is the one below recommended?)
https://forum.xda-developers.com/Mi-9/development/recovery-twrp-3-3-1-siankatabg-t3934962
3. I am actually confused about the decryption thing, do I still need to wipe data first?
4. wipe system, wipe data (?), flash eu or ROS rom, flash gapps, flash magisk, reboot?
Thank you guys for helping me
You could easily test it. If you are on stock rom and flashed twrp you should see all your data. If you can, you don't need to format data.
Kollachi said:
You could easily test it. If you are on stock rom and flashed twrp you should see all your data. If you can, you don't need to format data.
Click to expand...
Click to collapse
which twrp would you recommend for flashing ROS??
damnthomas said:
which twrp would you recommend for flashing ROS??
Click to expand...
Click to collapse
Siankatabg's version or latest version by mauronofrio.
Kollachi said:
Siankatabg's version or latest version by mauronofrio.
Click to expand...
Click to collapse
thanks!
so after i flashed the twrp, i need to wipe /system, /data, /cache, /davik-cache before flashing the ROS?
then after flashing the ROS, i need to reboot into the system first, and then go back to the twrp to flash magisk?
damnthomas said:
thanks!
so after i flashed the twrp, i need to wipe /system, /data, /cache, /davik-cache before flashing the ROS?
then after flashing the ROS, i need to reboot into the system first, and then go back to the twrp to flash magisk?
Click to expand...
Click to collapse
Yes wipe your device and flash Ros and flash twrp.
Reboot directly into recovery and flash magisk.
Reboot and it should be fine.:good:
Kollachi said:
Yes wipe your device and flash Ros and flash twrp.
Reboot directly into recovery and flash magisk.
Reboot and it should be fine.:good:
Click to expand...
Click to collapse
thanks for your reply!
you mean i need to flash the twrp again after flashing ROS or eu rom or global rom
and then i need to boot into the system first or directly flash the magisk?
damnthomas said:
thanks for your reply!
you mean i need to flash the twrp again after flashing ROS or eu rom or global rom
and then i need to boot into the system first or directly flash the magisk?
Click to expand...
Click to collapse
I did: flash rom, flash recovery, directly reboot into recovery and flash magisk. After that I rebooted to system.
Kollachi said:
I did: flash rom, flash recovery, directly reboot into recovery and flash magisk. After that I rebooted to system.
Click to expand...
Click to collapse
ok! thanks!
so which twrp u r using right now? if i want to flash global rom, just pick either one twrp is fine?
I'm playing with both twrps. Mauronofrio and siankatabg. It's almost the same. Should work both great.
Kollachi said:
I'm playing with both twrps. Mauronofrio and siankatabg. It's almost the same. Should work both great.
Click to expand...
Click to collapse
Thanks man!
Will try to flash it after ~14x hours for unlocking the bootloader
Hello, guys. I have an issue with magisk 19.3.
I flashed MIUI 10 Global version in my Mi 9. After that, I flash TWRP then reboot to TWRP install magisk 19.3 and reboot system, but not able to get in the system instead boot to recovery. Does anybody know why?
Any Magisk modules installed? In this case delete them first.
Cheers
Toscha
toscha42 said:
Any Magisk modules installed? In this case delete them first.
Cheers
Toscha
Click to expand...
Click to collapse
No. I didn't installed anything. I just flash MIUI 10 and flash in TWRP, then flash Magisk from TWRP.
Flash ROM, boot system to setup, then flash magisk.
badaas said:
Flash ROM, boot system to setup, then flash magisk.
Click to expand...
Click to collapse
I did the samething as you said, but it keep rebooting after I installed the Magisk. (Keep rebooting on the screen shows Xiaomi logo and unlock)
Try Canary magisk
badaas said:
Try Canary magisk
Click to expand...
Click to collapse
Yeah, I'm using Canary, but still same issue not able to boot the system.
Hi, I've been trying to root my phone for a while now. I tried installing twrp mauronofrio and orange fox, but when I flash the magisk zip, it enters in some kind of bootloop, but it takes me to the recovery again. I've tried uninstalling magisk, so it will make my phone work again, but then I have to install the recovery again. So, anyone knows why I can't flash magisk nor keep the recovery?
Thanks
Hey, which ROM have you tried to install it on?
can't root it!
Hi
same problem with me, i've tried for 3 days so far.
Stock EEA Rom Android 10, MIUI 11 (and tried with MIUI 10 android 9), Unlocked.
i tried:
1-Flash stock rom.
2-Flash recovery
3-Flash magisk
4-flash Disable_Dm-Verity_10.20.2019.zip
>> Bootloop.
and tried:
1-Flash stock rom.
2-Flash recovery
3-flash Disable_Dm-Verity_10.20.2019.zip
4-Flash magisk
5-flash Disable_Dm-Verity_10.20.2019.zip again.
>> Same result.
Also:
i tried:
1-Flash stock rom.
2-Flash recovery
3-Flash magisk
4-flash Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip
5- wipe Data parition.
>> Its worked! nut without Encyption!!
i tried to downgrade to Global stock rom (Android 9, MIUI 10)
same result.
Stock EEA Rom Android 10, MIUI 11
have problem with magisk 20.1 try magisk 19.4 or change to xiaomi.eu 11 it much better with call recording and mfs and u can root it with 20.1 magisk
i tried this stock rom before same issue with me
Does work with magisk 19.4?
I'm thinking of rooting my Mi 9t pro.
Neleks90 said:
Does work with magisk 19.4?
I'm thinking of rooting my Mi 9t pro.
Click to expand...
Click to collapse
I will try after few min's, will write any update!
mkaraz1994 said:
I will try after few min's, will write any update!
Click to expand...
Click to collapse
Thanks. I'm so curious whether flashing magisk 19.4 will work or not.
Neleks90 said:
Thanks. I'm so curious whether flashing magisk 19.4 will work or not.
Click to expand...
Click to collapse
I'm so sorry, but doesn't works!
i tried with Android 9, and Android 10 same result bootloop!!
so i'm going to install xiamoi.eu verisons and try!
Can you tell me how recovered from bootloop?
What did you do to make your phone workig again?
Neleks90 said:
Can you tell me how recovered from bootloop?
What did you do to make your phone workig again?
Click to expand...
Click to collapse
when i've bootloop i uninstall magisk by its uninstall.zip, or re-flash stock rom by MiFlash tools or by Orange/TWRP recovery, almost i've tried everything in the forum to get rooted by no any way rooted it!
but Finally rooted!
with xiamoi.eu rom!
Thanks to @Antidote03
mkaraz1994 said:
when i've bootloop i uninstall magisk by its uninstall.zip, or re-flash stock rom by MiFlash tools or by Orange/TWRP recovery, almost i've tried everything in the forum to get rooted by no any way rooted it!
but Finally rooted!
with xiamoi.eu rom!
Thanks to @Antidote03
Click to expand...
Click to collapse
Great happy to hear that.
Could you please tell me which version you use now?
You only flashed xiaomi.ec rom and magisk?
Xiaomi.eu rom via twrp root with magisk =gg
Great.
Which version you have installed? Could you please tell me to know which to download.?
As far as I can see you haven't formatted your data! You need to format your data before rebooting to system!
Neleks90 said:
Great.
Which version you have installed? Could you please tell me to know which to download.?
Click to expand...
Click to collapse
latest version, i do this steps:
wipe data, cache, d-cache
flashing the rom by TWRP
reboot, setup my phone
reboot to recovery flash magisk 20.1 zip
reboot to phone and installed magisk manager!
All its done!
FallenJedi said:
As far as I can see you haven't formatted your data! You need to format your data before rebooting to system!
Click to expand...
Click to collapse
if you re-read my post will see the another, after i foramt the data its will work yeah, but without encryption!
so did you've rooted K20 pro/Mi 9T pro with stock rom by magisk and its done with encryption?
Hi!
After flashing the One UI Beta to your S9/S9+ you can flash the latest TWRP on the same way through Odin jow you did it on Android Pie.
After flashing TWRP you need to wipe data.
Next step is to flash the latest magisk zip 20.1.
Than you have to flash the zip from here. This will modify the TWRP and make it fully working.
No more bootloop after flashing TWRP.
All credits goes to @Alucard for this great tweak.
g960u/u1?
rianplas said:
g960u/u1?
Click to expand...
Click to collapse
No idea on snapdragon.
Its for exynos.
Oel said:
Hi!
After flashing the One UI Beta to your S9/S9+ you can flash the latest TWRP on the same way through Odin jow you did it on Android Pie.
After flashing TWRP you need to wipe data.
Next step is to flash the latest magisk zip 20.1.
Than you have to flash the zip from here. This will modify the TWRP and make it fully working.
No more bootloop after flashing TWRP.
All credits goes to @Alucard for this great tweak.
Click to expand...
Click to collapse
After flashing the One UI Beta need waiting 7 days to enable oem unlock?
andylitias said:
After flashing the One UI Beta need waiting 7 days to enable oem unlock?
Click to expand...
Click to collapse
No problem.here
I had the OEM unlock before i changed to One Beta
Oel said:
No problem.here
I had the OEM unlock before i changed to One Beta
Click to expand...
Click to collapse
already flash zip and got error failed to unmount odm
and bootloop
andylitias said:
already flash zip and got error failed to unmount odm
and bootloop
Click to expand...
Click to collapse
The odm thing is not important.
Wich unit and wich steps you are going?
You deleted data first, than flashing magisk and after this the alucard2 zip?
Oel said:
The odm thing is not important.
Wich unit and wich steps you are going?
You deleted data first, than flashing magisk and after this the alucard2 zip?
Click to expand...
Click to collapse
G960F
already in one ui beta 2 android 10
flash twrp
format data
flash magisk 20.1 and flash alucard
still bootloop
andylitias said:
G960F
already in one ui beta 2 android 10
flash twrp
format data
flash magisk 20.1 and flash alucard
still bootloop
Click to expand...
Click to collapse
Ok, did you try to do download the zip again?
Please try this and flash again.
Wich version of twrp you are on?
Oel said:
Ok, did you try to do download the zip again?
Please try this and flash again.
Wich version of twrp you are on?
Click to expand...
Click to collapse
twrp-3.3.1-0
already download zip and flash again but still bootloop
andylitias said:
twrp-3.3.1-0
already download zip and flash again but still bootloop
Click to expand...
Click to collapse
Please try this older version. It works both on my G960F
twrp-3.3.1-0
already in beta 2android 10
flash twrp
format data
flash magisk 20.1
flash zip
And bootloop from Samsung logo
---------- Post added at 11:48 PM ---------- Previous post was at 11:30 PM ----------
Oel said:
Please try this older version. It works both on my G960F
Click to expand...
Click to collapse
Nope
This is the magisk patched kernel for the 960 Beta.
Flash it through twrp in "boot".
Flash the zip again and boot.
If it doesnt work than go back to twrp and flash the magisk uninstaller zip, than the patched kernel and it should boot.
IMPORTANT!
THE FIRST BOOT AFTER THE MILTI DISABLE ZIP NEEDS BETWEEN 3 TO 5 MINUTES!
https://we.tl/t-mB2vCFl51O
Yes, it works now!
RpRAUC said:
Yes, it works now!
Click to expand...
Click to collapse
method?
andylitias said:
twrp-3.3.1-0
already download zip and flash again but still bootloop
Click to expand...
Click to collapse
RpRAUC said:
Yes, it works now!
Click to expand...
Click to collapse
Great to hear!
What was the problem?
The long time on the first boot?
Oel said:
Great to hear!
What was the problem?
The long time on the first boot?
Click to expand...
Click to collapse
I will try tomorrow
already back to pie again
Thanks
andylitias said:
method?
Click to expand...
Click to collapse
This is the magisk patched kernel for the 960 Beta.
Flash it through twrp in "boot".
Flash the zip again and boot.
This metod works fo me
---------- Post added at 12:27 AM ---------- Previous post was at 12:25 AM ----------
Oel said:
Great to hear!
What was the problem?
The long time on the first boot?
Click to expand...
Click to collapse
2-3 min, then setup menu (account etc)
[email protected] and v2 doesn work,
I don't understand why
Here a better description wich steps you have to go:
Here is a instruction how to install OneUI beta with TWRP and root.
Flash Stock Rom CSK1 (XEU)
Let it boot (Welcome screen)
Flash update.zip (via abd or sd card)
Let it boot (welcome screen)
Flash twrp.tar
Boot in twrp
Format data
Reboot in recovery
Flash multi.disable.samsung
Reboot
Finish setup
Reboot twrp
Flash magisk
Reboot
Install magisk manager apk
Open magisk
Install the update (it ask you when you open magisk manager)
Let it reboot
Finish
Thanks to LONEsnoWolf
RpRAUC said:
2-3 min, then setup menu (account etc)
[email protected] and v2 doesn work,
I don't understand why
Click to expand...
Click to collapse
smartlock working?
cant add google account?
Hello guys,
My Red Magic 3 is running on CN 3.29 and i have been received a new OTA update and no matter what, i cannot install it because of the root. My RN3 is equipped with TWRP recovery and magisk.
My Question is, Can i just download the ROM and just zip it through TWRP without any desktop help? Because I don't have pc. Any one who have tried this kind of method feel free to reply here. Will be so helpful. Thank youuu
yes you can.first flash rom and dont reboot go back flash twrp then boot twrp and flash magisk ..profit
What is RN3?
walkwitmeinhel said:
yes you can.first flash rom and dont reboot go back flash twrp then boot twrp and flash magisk ..profit
Click to expand...
Click to collapse
How do you want me to flash rom through twrp or system update recovery.
Once installation done of rom, can we install magisk tht is in internal storage?
Can we install twrp from twrp????
Nightwish1976 said:
What is RN3?
Click to expand...
Click to collapse
I'm sorry, RM3* red magic 3
kiranaxel said:
How do you want me to flash rom through twrp or system update recovery.
Once installation done of rom, can we install magisk tht is in internal storage?
Can we install twrp from twrp????
Click to expand...
Click to collapse
i already share working twrp for A10 yes flash rom from twrp dont reboot go back flash twrp.img and reboot to twrp and flash magisk
walkwitmeinhel said:
i already share working twrp for A10 yes flash rom from twrp dont reboot go back flash twrp.img and reboot to twrp and flash magisk
Click to expand...
Click to collapse
Any linkz to watch and do?
walkwitmeinhel said:
i already share working twrp for A10 yes flash rom from twrp dont reboot go back flash twrp.img and reboot to twrp and flash magisk
Click to expand...
Click to collapse
Thanks Buddy, it worked. And i had to reinstall gapps and magisk third time then gapps worked flawlessly.