I work in an office that has no reception. Normally, I have to walk to the window to get a signal. Today, I initiated a download from the window and walked back to my desk, which normally has zero reception. I noticed that I was still getting data and the download was still going.
Does that mean that if my phone is idle/asleep, it stops keeping my signal alive? Can I keep my connection active? Is there some battery optimization or tweak that prevents my radios from staying connected?
itchyUnder said:
I work in an office that has no reception. Normally, I have to walk to the window to get a signal. Today, I initiated a download from the window and walked back to my desk, which normally has zero reception. I noticed that I was still getting data and the download was still going.
Does that mean that if my phone is idle/asleep, it stops keeping my signal alive? Can I keep my connection active? Is there some battery optimization or tweak that prevents my radios from staying connected?
Click to expand...
Click to collapse
If you are in a place with no reception, you won't have connection. Maybe your work place has very bad reception, so that the phone sometimes gets internet connection and sometimes not.
If you do not switch energy saving options on, this should not interfere.
Best to get WiFi at the office.
Related
Hi. I've bought my first Android device, a HTC G1 Dream. I've gained root access, installed the last Cyanogen release (with Android 1.6), RA-1.2.3.
What I've noticed is a strange behavior, quite different from the one I had with my BlackBerry Bold.
When I'm home I enable wifi, to save some datas from my (limited) contract. It works and I've set not to disable wifi when in standby. It works. But as soon as I go out (and the wifi coverage finishes), it doesn't re-enable UMTS data until I awake it from the standby manually.
It's quite annoying...is there a way to change this kind of behavior?
Thank you very much!
Is it still connected to EDGE or GPRS? If this is the case it is a PowerSaving feature, if it's totally lost connection with the net then you have a problem I guess...
sturmeh said:
Is it still connected to EDGE or GPRS? If this is the case it is a PowerSaving feature, if it's totally lost connection with the net then you have a problem I guess...
Click to expand...
Click to collapse
When I connect via Wifi, it disconnects from edge, gprs or umts. And doesn't reconnect when the wifi coverage ends (unless I "re-awake" the phone,pushing the menu button)
from what i read your saying thats while its sleeping its not connecting to your data services when your leaving wifi coverage, so my question is: do you not see the data icon when you wake up the phone but after waking it it comes on or are u assuming that its not on?
stefan.buddle said:
from what i read your saying thats while its sleeping its not connecting to your data services when your leaving wifi coverage, so my question is: do you not see the data icon when you wake up the phone but after waking it it comes on or are u assuming that its not on?
Click to expand...
Click to collapse
Yes, I cannot see the icon as soon as I wake up it. Then, in some seconds, it reconnects. More, I can see it's not just a "icon" issue because my K9-mail stops collecting my mailboxes when that situation happen.
So I will turn on wifi on my phone but for some reason it still shows the 3G bar and I get not signal at my house so when i try to load up webpages its clearly trying to use my non existent data signal rather than the wifi to load thing. why is it doing this? it's supposed to override the data but its not.
shadowswithin said:
So I will turn on wifi on my phone but for some reason it still shows the 3G bar and I get not signal at my house so when i try to load up webpages its clearly trying to use my non existent data signal rather than the wifi to load thing. why is it doing this? it's supposed to override the data but its not.
Click to expand...
Click to collapse
I would troubleshoot your network. The signal bars for cellular do not go away when connected to WiFi, so I would not suspect that is a symptom.
well i am aware of my router being complete crap but im not saying the cellular bars im saying even though wifi is enabled it still trying to use data instead of wifi.
shadowswithin said:
well i am aware of my router being complete crap but im not saying the cellular bars im saying even though wifi is enabled it still trying to use data instead of wifi.
Click to expand...
Click to collapse
How are you measuring that?
Check your IP address and see if you can verify from that.
All I know is that I've had wireless issues since day one with my turbo, in fact so bad that I just never use anymore (yea sucks)
I am at my inlaws, using my laptop to work all day on the wifi and connection is great. on my Turbo - the wifi keeps stopping, hiccupping, etc. I have to keep turning on/off, etc. to get stuff to work. I just gave up.
There are other threads on the Motorola Forum with similar issues.
Wish we could figure out what magic settings are necessary to make wifi stable.
So I am using a Nexus 6 on the Latest Tmo build (28E?) of Stock Rom and Stock Kernel Rooted, Encrypted.
Since the update that enabled wifi-calling for the N6 I have taken to setting my phone to airplane mode and turning on Wifi only to save battery since the signal at my house bounces back and forth from LTE to 3G and that murders my battery. Most of the time the signal strength graph shows blank and battery app correctly shows the cellular radios as having no on time. However, after being idle for a while (it would seem) the graph begins to show the signal strength as Red (no signal) and the cellular standby shows up in battery usage with the radios as being on (with no signal) and "active for a few seconds". Toggling airplane mode on and off usually restores them to showing up as off. Other times I never notice and it stays on for a few hours and goes back off on it's own. My main concern is that it seems to be activating the radio on it's own, my minor concern would be that my battery monitor app shows that it's using the battery. What could be causing this? I don't think it's a reporting glitch, because it shows up in both the system battery panel and a 3rd party one. If anyone has any thoughts or could point me towards a tool that could help me figure out what's turning on the radio when it's supposed to be off, please let me know. I've included photos from today showing what I'm talking about, the phone has been in airplane mode the whole time in these photos.
Thanks so much!
Kev
I think your issue is one of the reason why I cannot get Wifi Calling working at all. No matter what I do, my phone is holding onto a cellular network. Still trying to figure this out.
nautec said:
I think your issue is one of the reason why I cannot get Wifi Calling working at all. No matter what I do, my phone is holding onto a cellular network. Still trying to figure this out.
Click to expand...
Click to collapse
The best I can tell, "Android OS" is the only thing that shows any mobile packets sent or received so it's got to be a system thing.
If you have the myT-mobile app installed try uninstalling it I found that app totally screwed with my Nexus 6, turning WiFi on when I had no desire to use it.
stevemw said:
If you have the myT-mobile app installed try uninstalling it I found that app totally screwed with my Nexus 6, turning WiFi on when I had no desire to use it.
Click to expand...
Click to collapse
Unfortunately that's not the fix. I don't have that app installed. Tmo is sending me a new SIM as I am also randomly having Wifi calling drop in and out even while my wifi is connected.
Does anyone know any app that would let me see specifically what app is engaging the mobile radio?
Airplane mode disables all outbound communications however inbound ones are still discoverable.
I can receive calls in airplane mode...
Samg381 said:
Airplane mode disables all outbound communications however inbound ones are still discoverable.
Click to expand...
Click to collapse
... I just joined to see why is my Nexus 6 receiving calls in airplane mode (and Wifi off...). It's a recurrent problem... everytime there's an update I have this issue...
Does anyone else experience their pixel 5 deciding that a perfectly good wifi connection is "low quality" and using cellular instead?
I have this happen very often. Have at least 50% of the wifi symbol full on my fast home network (that nothing else struggles on) and my pixel 5 just labels it as "low quality" and switches to cellular. I normally just have to go to airplane mode and turn wifi on. Toggling wifi (without airplane mode) will get it to reconnect but it'll quickly do it again on occasion.
I remember in the past there was a setting for aggressive WiFi to cellular handover but that's gone now. Not sure if that would solve this anyway.
What are your actual wifi stats? Just because the icon shows 50% doesn't mean you actually have a good signal.
Gibsonflyingv said:
Does anyone else experience their pixel 5 deciding that a perfectly good wifi connection is "low quality" and using cellular instead?
I have this happen very often. Have at least 50% of the wifi symbol full on my fast home network (that nothing else struggles on) and my pixel 5 just labels it as "low quality" and switches to cellular. I normally just have to go to airplane mode and turn wifi on. Toggling wifi (without airplane mode) will get it to reconnect but it'll quickly do it again on occasion.
I remember in the past there was a setting for aggressive WiFi to cellular handover but that's gone now. Not sure if that would solve this anyway.
Click to expand...
Click to collapse
count your blessings. in my experiences, android tends to hang onto bad wifi connections for faaaarrrrrrr too long. i'll be a half mile from the house before it finally switches over.
WaxysDargle said:
count your blessings. in my experiences, android tends to hang onto bad wifi connections for faaaarrrrrrr too long. i'll be a half mile from the house before it finally switches over.
Click to expand...
Click to collapse
I wish that was the case for me. Mine will pick a single bar of LTE over my near full wifi signal. I've never had another phone do something like that. I basically have to use my phone with airplane mode on at home.
Unlock the developer settings and turn on verbose wifi. It should give you better wifi signal and band information to work with.
I have this strange issue that has been with me almost since the beginning. I haven't been able to trace when it happens, but it now seems almost 100% of the time.
I only have WiFi in the house (wifi6, if it matters). If I go out, I only have 4G (I left only 4G and disabled 5G). I have no data until I put the phone into airplane mode and back, or I disable and re-enable mobile data.
Same thing when I go back in the house: no data until I disable and re-enable WiFi.
I've disabled the option for 'always-on mobile data' or similar, it's quite a battery drain if there's no cell signal.
Seems like a very strange bug, I don't have this with any of my other phones.
So you have both WiFi and 4G enabled and they don't switch seamlessly?
Exactly. I always have to restart each one of them, usually by toggling airplane mode. Was wondering if anyone else ran into this issue.
Ok this really is strange. There are 2(!) different toggles to enable data switching between WiFi and 4G, but for me it works flawlessly without them! As soon as I get out of my home WiFi range, 4G kicks in, and when I get in range again, the phone connects to my WiFi...
Hi, i have this problem too but it's not always.
I have a wifi 6 router too.
I also have problems switching from wifi to 4g. Need to toggle airplane mode on/off. 5g deactivated. No wifi 6 here.
I always assumed my vpn is causing problems during the switch to 4g. But hearing others have the same problem i would assume its zenfone problem.
I never had any issues in this area with my ZF8. With the option to have cellular always on I could walk out of my WiFi zone during a video call and no drop or short pause would appear.
With this off the network need a few second to work, and some apps need to be refreshed/restarted to gain connection. Never needed to toggle connection for this to work.
Maybe a reset would be enough or check for updates.
Ah, exactly! It does not necesarily need a network restart, but some apps just lose connection for a while, which can be from a few seconds to >1h. Which is even more weird as the icons are showing full connectivity. I would go out of the house, do stuff, come back later and I would only get the notifications when I'm back inside the house.
Rarely I had the connection drop completely (no signal) when switching, but I haven't noticed this happening since the last update.