If I try NR ONLY in the 4636 menu I can't get a signal at all as EE currently has NSA only. But if I use NR/LTE only it can often lose the 5g signal.
I'm rooted and have looked into network signal guru, cellular pro and LTE discovery but no luck yet.
Has anyone managed this?
I read somewhere that by switching off "automatically select network" in Settings>Network>Mobile Network does the trick
Related
in Australia we have a network called 3
3 has bad receception on 3g network in some areas but
lucky for us they use telstra as their 2g carrier
I have found that going to network
settings, phone , network
and selecting manual and then telstra
and also selecting set networks
and telstra as the priority on the network list by
moving it up and putting 3telstra top and 3 telstra below
forces it to always have telstra 2 g and full reception anywhere
so no more three 3g network drop outs
srsjason2040 said:
in Australia we have a network called 3
3 has bad receception on 3g network in some areas but
lucky for us they use telstra as their 2g carrier
I have found that going to network
settings, phone , network
and selecting manual and then telstra
and also selecting set networks
and telstra as the priority on the network list by
moving it up and putting 3telstra top and 3 telstra below
forces it to always have telstra 2 g and full reception anywhere
so no more three 3g network drop outs
Click to expand...
Click to collapse
you can switch off 3g in phone options. the unit will run 30% longer because the search for 3g and 3g connection itself costs a lot of energy
Hey All,
I searched the web on and on and cant figure it out.
My provider Vodafone in holland provides me with 4G.
On some sites i read there is a minor update which activates the LTE option.
that update is for the I9505..
I cant find if its possible to unlock my LTE option.
i have the I9295. And throug kies or OTA is no update
I hope you can help me out guys.
Thaantje said:
Hey All,
I searched the web on and on and cant figure it out.
My provider Vodafone in holland provides me with 4G.
On some sites i read there is a minor update which activates the LTE option.
that update is for the I9505..
I cant find if its possible to unlock my LTE option.
i have the I9295. And throug kies or OTA is no update
I hope you can help me out guys.
Click to expand...
Click to collapse
I can't really help you but as far as I know LTE is already unlocked and working on all international S4 Actives. Mine certainly worked perfectly out of the box - although I turned it off promptly because I have ****ty 4G coverage where I live so it was nothing but a battery drain for me.
Are you sure you have a 4G sim card, and that you are in an area where 4G has coverage?
If you go in under settings > connections > more networks > mobile networks > network mode don't you have the LTE option at the top?
Cederic said:
I can't really help you but as far as I know LTE is already unlocked and working on all international S4 Actives. Mine certainly worked perfectly out of the box - although I turned it off promptly because I have ****ty 4G coverage where I live so it was nothing but a battery drain for me.
Are you sure you have a 4G sim card, and that you are in an area where 4G has coverage?
If you go in under settings > connections > more networks > mobile networks > network mode don't you have the LTE option at the top?
Click to expand...
Click to collapse
Im not 100% but i got the textmessage from my provider, so i recon they only send it to people who are able to use the 4G.
Yes, i am in a 4g coverage area
i dont have the LTE option at the top no. i have:
- wcdma/gsm
- only wcdma
- only gsm
Thaantje said:
Im not 100% but i got the textmessage from my provider, so i recon they only send it to people who are able to use the 4G.
Yes, i am in a 4g coverage area
i dont have the LTE option at the top no. i have:
- wcdma/gsm
- only wcdma
- only gsm
Click to expand...
Click to collapse
Well then I really have no idea - the only thing I can think of is that you might need to replace your sim card if your provider didn't already do so in advance of the 4G rollout. Hopefully someone with more information might step in here, but the international version is LTE capable out of the box. If you don't hear anything else I'd suggest to try and contact vodafone and get a clear answer from them first.
If you check the mobile networks in your area and don't see anything that supports LTE, you may just live in an area that doesn't have it yet (people get 4G and LTE somewhat mixed up - 4G is the overall identifier for a whole class of technologies with "4th generation cellular networks" basically while LTE is technically one of those technologies so, it should rightfully be classified as 4G in most respects.
Having said that, the only way I got my GS4A to function in LTE mode - meaning it actually shows LTE in the notification bar under the 4 with a small G and LTE underneath it - was to go into the service menu (*#*#4636#*#*) and change the preferred network type to either LTE only or LTE/GSM auto (PRL). Once I did that the radio would reset and connect and then it would be in proper LTE mode. Doing a speedtest with the Speedtest.net app shows LTE as the connection whereas with my standard setting which is WCDMA Preferred (T-Mobile AWS) it'll just show as "4G."
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional. I don't use it because here in Vegas where I live (specifically my home location) the LTE mode gets me about 1-2 bars of signal (about 8-12Mbps) whereas the WCDMA Preferred setting pulls in 5 bars rock solid and 25-35Mbps.
Can't do screenshots or I'd add them, I'm running the pre-release MI2 ROM presently and that aspect is borked.
br0adband said:
If you check the mobile networks in your area and don't see anything that supports LTE, you may just live in an area that doesn't have it yet (people get 4G and LTE somewhat mixed up - 4G is the overall identifier for a whole class of technologies with "4th generation cellular networks" basically while LTE is technically one of those technologies so, it should rightfully be classified as 4G in most respects.
Having said that, the only way I got my GS4A to function in LTE mode - meaning it actually shows LTE in the notification bar under the 4 with a small G and LTE underneath it - was to go into the service menu (*#*#4636#*#*) and change the preferred network type to either LTE only or LTE/GSM auto (PRL). Once I did that the radio would reset and connect and then it would be in proper LTE mode. Doing a speedtest with the Speedtest.net app shows LTE as the connection whereas with my standard setting which is WCDMA Preferred (T-Mobile AWS) it'll just show as "4G."
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional. I don't use it because here in Vegas where I live (specifically my home location) the LTE mode gets me about 1-2 bars of signal (about 8-12Mbps) whereas the WCDMA Preferred setting pulls in 5 bars rock solid and 25-35Mbps.
Can't do screenshots or I'd add them, I'm running the pre-release MI2 ROM presently and that aspect is borked.
Click to expand...
Click to collapse
I can check my area on the vodafone site. I live in a 4G network area 100%!
i guess my wcdma is sufficient then.. didnt experience speedboost tho..
br0adband said:
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional.
Click to expand...
Click to collapse
That would be because you're on the i537 from ATT, rather than the i9295 that this discussion is about. I checked google and vodafone holland does indeed use LTE on the right bands in its brand new rollout, so it isn't that - most likely it's his sim that needs replacing or it's just not activated on his account yet.
I saw a few screenshots of people's Moto X's from sprint with a bunch of options under Network Mode. I have the XT1053 (TMO unlocked, on ATT network) and the only options I see are "Auto" and "2G."
I browsed around and found that there's an LTE OnOff app, but I'm just wondering if there's a way I can get those options for 3G on my device's Network Mode option list?
The reason why I even care is because for some reason at my workplace, I can't seem to get any data through LTE. My signal will display 3 bars of LTE, but it absolutely does not work. While it will turn off LTE and just say 4G since it's on auto, I find that a majority of my day, it WON'T switch. It stays on 4G LTE 99% of the time and does not function at all. When I walk outside the building, LTE works perfectly fine. Would I be right to assume that the auto mode is literally on borderline between switching, so it never establishes a stable connection?
I guess it brings me to the question, is the Auto mode inefficient / will I have to live with manually turning off LTE every time I get to work? :/
noc215 said:
I saw a few screenshots of people's Moto X's from sprint with a bunch of options under Network Mode. I have the XT1053 (TMO unlocked, on ATT network) and the only options I see are "Auto" and "2G."
I browsed around and found that there's an LTE OnOff app, but I'm just wondering if there's a way I can get those options for 3G on my device's Network Mode option list?
The reason why I even care is because for some reason at my workplace, I can't seem to get any data through LTE. My signal will display 3 bars of LTE, but it absolutely does not work. While it will turn off LTE and just say 4G since it's on auto, I find that a majority of my day, it WON'T switch. It stays on 4G LTE 99% of the time and does not function at all. When I walk outside the building, LTE works perfectly fine. Would I be right to assume that the auto mode is literally on borderline between switching, so it never establishes a stable connection?
I guess it brings me to the question, is the Auto mode inefficient / will I have to live with manually turning off LTE every time I get to work? :/
Click to expand...
Click to collapse
3 bars of LTE is an excellent signal. With 1 bar of signal I can still get 15mbps down from my provider. If your phone is detecting such a strong received signal it won't be switching back to HSPA on its own. For some reason the building you're in may block the phones transmitted signal more then it blocks the signal from the cell site. I am guessing you're on band 4 LTE which has quite the frequency difference between uplink and downlink. Your only option(assuming the phone or cell site isn't defective) is to manually switch to WCDMA with a third party app such as the "LTE setting" app in the Play store. Or unlock your bootloader and flash firmware from another provider that has more options. I know the Rogers Canada firmware has an LTE on/off option, it also has a 2G only option. Sadly Rogers has not yet approved the release of 4.4 (kitkat).
Steve-x said:
3 bars of LTE is an excellent signal. With 1 bar of signal I can still get 15mbps down from my provider. If your phone is detecting such a strong received signal it won't be switching back to HSPA on its own. For some reason the building you're in may block the phones transmitted signal more then it blocks the signal from the cell site. I am guessing you're on band 4 LTE which has quite the frequency difference between uplink and downlink. Your only option(assuming the phone or cell site isn't defective) is to manually switch to WCDMA with a third party app such as the "LTE setting" app in the Play store. Or unlock your bootloader and flash firmware from another provider that has more options. I know the Rogers Canada firmware has an LTE on/off option, it also has a 2G only option. Sadly Rogers has not yet approved the release of 4.4 (kitkat).
Click to expand...
Click to collapse
That makes a lot more sense to me now. So basically the "Auto" mode only considers my reception and not transmittance strength, so it never saw a need to switch me off LTE. I am almost sure it is not my phone because I started experiencing a signal loss issue with my S3 a few days ago. I doubt it's the cell site because as soon as I step out of the building, LTE works with no problems.
I did ended up using LTE OnOff to force CDMA and I can actually do stuff now. I went and did a speedtest ...
Ping: 114 ms
Down: 4.06 Mbps
Up: 0.77 Mbps
I guess with the lack of options, I have yet another reason to roll up the sleeves and get my hands dirty. Haven't touched ABD since I had a samsung captivate!
Thank you
Hello guys,
I'm using Mi9T Pro with Stock EU rom MIUI 12 version 12.0.4
I have this issue with Xiaomi regarding how the system handles prioritization of Network Band when it comes to using Mobile Data connection.
We know that we have options to prefer 4G, 3G or 2G. But it doesn't define which specific band. Like for example, 4G can be 4G/LTE or 4G+/LTE+. These 2 networks seem to be the same but these actually have different network bands
The question is how does Xiaomi system prioritize which band to select?
Does it prefer the one with higher signal or the one that pings better.
I have this question because as I have experienced, Xiaomi system seem to prefer the one with better signal regardless if it can't even pull any data. In short, it will keep connecting to a network with a better signal strength even if you won't get any internet connection out of it.
I've been noticing this when I set my phone to 4G preferred in my location. When signal indicator turns to 4G/LTE. It may seem to show you that you're connected to the internet but you can't really browse anything because there's actually no data for that band. But when it turns to 4G+, that's when I really get to connect to the internet.
And the biggest problem is that the system prefers to connect to the 4G band. That's why I'd prefer using 3G network because I have a more stable 3G+ signal here.
Another thing that's really disappointing is that my other phone OnePlus 5T handles this well. We share the same APN.
Sadly there's no band selection in *#*#4636#*#*
It would be glad if anyone could provide a better solution to this.
Thank you!
peeweew said:
We know that we have options to prefer 4G, 3G or 2G. But it doesn't define which specific band. Like for example, 4G can be 4G/LTE or 4G+/LTE+. These 2 networks seem to be the same but these actually have different network bands
...
I've been noticing this when I set my phone to 4G preferred in my location. When signal indicator turns to 4G/LTE. It may seem to show you that you're connected to the internet but you can't really browse anything because there's actually no data for that band. But when it turns to 4G+, that's when I really get to connect to the internet. ..
Click to expand...
Click to collapse
4+ g usually means (specially on Xiaomi phones) LTE Advanced Carrier Aggregation where no other/different bands are used but instead the phone is in parallel attached to more than one 4g band. As such, it increases the speed (and maybe, in your case provides a fail-over?!):
https://www.gizbot.com/mobile/featu...ifference-between-4g-4g-explained-053769.html
However, there is another question why (on that place) you have strong 4g signal with no Internet, so that when your phone switches to CA and in parallel attaches to another 4g band (maybe with a weaker signal) it obtains Internet connection over that second band
At least to better understand on which band (at which place and which base station) you have a 4g signal but with no Internet connection, install an app like Network Cell Info Lite, LTE Discovery, Net Monitor Lite). I think with Net Monster (all apps are on Playstore) you can even see on the map where is the base station you are attached to
If your phone is rooted, you could use Network Signal Guru that will show you, in case of 4+g all bands you are aggregated to with their signal strengths, base stations locations, etc (apps above would always show just one, primary band):
https://forum.xda-developers.com/mi-9t/help/monitoring-4g-advanced-aggregated-t4107967
zgfg said:
4+ g usually means (specially on Xiaomi phones) LTE Advanced Carrier Aggregation where no other/different bands are used but instead the phone is in parallel attached to more than one 4g band. As such, it increases the speed (and maybe, in your case provides a fail-over?!):
https://www.gizbot.com/mobile/featu...ifference-between-4g-4g-explained-053769.html
However, there is another question why (on that place) you have strong 4g signal with no Internet, so that when your phone switches to CA and in parallel attaches to another 4g band (maybe with a weaker signal) it obtains Internet connection over that second band
At least to better understand on which band (at which place and which base station) you have a 4g signal but with no Internet connection, install an app like Network Cell Info Lite, LTE Discovery, Net Monitor Lite). I think with Net Monster (all apps are on Playstore) you can even see on the map where is the base station you are attached to
If your phone is rooted, you could use Network Signal Guru that will show you, in case of 4+g all bands you are aggregated to with their signal strengths, base stations locations, etc (apps above would always show just one, primary band):
https://forum.xda-developers.com/mi-9t/help/monitoring-4g-advanced-aggregated-t4107967
Click to expand...
Click to collapse
Ohhh thank you for this explanation.... Someone actually mentioned aggregation to me also. This helps make me clear up how Xiaomi does this and that. Does this mean force selection of network band won't work on Xiaomi devices?
peeweew said:
Ohhh thank you for this explanation.... Someone actually mentioned aggregation to me also. This helps make me clear up how Xiaomi does this and that. Does this mean force selection of network band won't work on Xiaomi devices?
Click to expand...
Click to collapse
I'm pretty sure that with MIUI 11 there was an option to disable/enable 4+, but on MIUI 12 (12.0.2 QFJEUXM) there is no more that option
I don't know of other options (except to prefer 4, 3 or 2 g), specially about selecting bands
choose band mode
peeweew said:
Hello guys,
I'm using Mi9T Pro with Stock EU rom MIUI 12 version 12.0.4
I have this issue with Xiaomi regarding how the system handles prioritization of Network Band when it comes to using Mobile Data connection.
We know that we have options to prefer 4G, 3G or 2G. But it doesn't define which specific band. Like for example, 4G can be 4G/LTE or 4G+/LTE+. These 2 networks seem to be the same but these actually have different network bands
The question is how does Xiaomi system prioritize which band to select?
Does it prefer the one with higher signal or the one that pings better.
I have this question because as I have experienced, Xiaomi system seem to prefer the one with better signal regardless if it can't even pull any data. In short, it will keep connecting to a network with a better signal strength even if you won't get any internet connection out of it.
I've been noticing this when I set my phone to 4G preferred in my location. When signal indicator turns to 4G/LTE. It may seem to show you that you're connected to the internet but you can't really browse anything because there's actually no data for that band. But when it turns to 4G+, that's when I really get to connect to the internet.
And the biggest problem is that the system prefers to connect to the 4G band. That's why I'd prefer using 3G network because I have a more stable 3G+ signal here.
Another thing that's really disappointing is that my other phone OnePlus 5T handles this well. We share the same APN.
Sadly there's no band selection in *#*#4636#*#*
It would be glad if anyone could provide a better solution to this.
Thank you!
Click to expand...
Click to collapse
Download activity launcher (play store), run it
Search band mode ===> Set radio band mode
Choose band mode you need
uncomment said:
Download activity launcher (play store), run it
Search band mode ===> Set radio band mode
Choose band mode you need
Click to expand...
Click to collapse
This is what I was looking for.
Thanks!
Since the Feb update, the 4A 5G works on standalone 5G (which doesn't require a simultanous LTE connection). For many place, on T-Mobile, that is 600Mhz for SA 5G which gives better signals inside buildings.
But I've noticed that outside, in areas with low signal for 5G, I get really poor connections, but if I go into settings and switch the preferred network ttpe to LTE from 5G, I have no problems.
Has anyone else noticed similar problems where the phone becomes unusable on 5G and won't switch to LTE?
You can tell if you are on SA 5G if you go Settings->About Phone->SIM Status and you'll see "NR SA" for Mobile voice network type and mobile data network type (see attached JPEG). (if you are on "non-standalone" 5G those will probably say LTE and "NR NSA".
I am wondering if the sensitivity for switching from SA 5G to LTE isn't set correctly - hopefully they will fix this since it's annoying to have to manually switch things (and impossible to do that if driving).