Related
**UPDATE RESOLVED**
For anyone who searches and has same problems.
I needed an sdcard to get the files onto the phone.
To recap - it was stuck in boot, TWRP would load and stated no OS installed.
1. In rooting guide as per Here download file linked in the guide and unzip.
2. From folder 3 of that zip file there is a folder called data containing stock.img - place this onto sdcard.
3. Then go to this thread and download the files as hosted on mega.nz - over 2 gig.
4. Extract that zip to the sd card so that on the card is a folder called 'dload'
5. To confirm, the dload folder should have update.app and 2 folders called dt and hw
6. Put sdcard into phone.
7 .Boot into TWRP
8. Goto install, select storage, select your sdcard then select stock.img, agree to install, ignore message about no os.
9.Once that has installed my phone just restarted, EMUI came up, read the dload folder automatically and ran.
Then once phone started it found a newer update and installed that.
Phone is now working, unrooted and bootloader is locked again.
All this was found on the XDA site, just across various posts.
Thanks again to all.
********ORIGINAL BELOW********
Hi all.
Please help, I'm a ****!
I unlocked bootloader with Huawi code from thier website.
Then I installed TWRP
Which in turn installed SuperSU
All rooted, jobs a fish. as per - This one and This thread.
Decided I dont need root anymore.
Tried to reset and wipe the phone.
Went into TWRP did a factory reset wipe.
Then went into TWRP again and did advanced wipe, and selected everything.
(yes yes i know, what a tit)
So after that i get the 'this phones is unsecured' message, press up vol 3 seconds, press power button to conti, wait 5 seconds etc.
so I wait, and it sticks on 'Your device is booting'
Restart, can get into stock recovery and hisuit will see the phone and try to restore it but fails and say my device is not supported??
Can get into erecovery and connected to wifi to try and update but does not find anything to download.
can get into twrp.
I have downloaded a stock rom as per -- This ROM
Perhaps this is not the correct ROM, but then how do i find out the correct ROM needed now I can not access phone details?
Forced that onto SD card but TWRP will not run it and says it is corrupt.
I can see it with ADB and device manager so my question really is....HELP??
How can i get just stock rom back onto it and then un-root and re-lock the bootloader?
Cheers in advanced.
fabgav said:
Hi all.
Please help, I'm a ****!
I unlocked bootloader with Huawi code from thier website.
Then I installed TWRP
Which in turn installed SuperSU
All rooted, jobs a fish. as per - This one and This thread.
Decided I dont need root anymore.
Tried to reset and wipe the phone.
Went into TWRP did a factory reset wipe.
Then went into TWRP again and did advanced wipe, and selected everything.
(yes yes i know, what a tit)
So after that i get the 'this phones is unsecured' message, press up vol 3 seconds, press power button to conti, wait 5 seconds etc.
so I wait, and it sticks on 'Your device is booting'
Restart, can get into stock recovery and hisuit will see the phone and try to restore it but fails and say my device is not supported??
Can get into erecovery and connected to wifi to try and update but does not find anything to download.
can get into twrp.
I have downloaded a stock rom as per -- This ROM
Perhaps this is not the correct ROM, but then how do i find out the correct ROM needed now I can not access phone details?
Forced that onto SD card but TWRP will not run it and says it is corrupt.
I can see it with ADB and device manager so my question really is....HELP??
How can i get just stock rom back onto it and then un-root and re-lock the bootloader?
Cheers in advanced.
Click to expand...
Click to collapse
you can find the model (for me it's vns-l31) on the back of the phone, just find the corresponding oeminfo file and the update file. flash the oeminfo file, put the update file from the rom zip in the dload folder and reboot using the 3 button combo till it says something about installing update
here's a list of update files: https://forum.xda-developers.com/hu...huawei-p9-lite-firmware-compilations-t3517124
and here you can find the oeminfo files, there's a google drive link under oemfiles, at least for the vns-l21, 22 and 31: https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
mjz2cool said:
you can find the model (for me it's vns-l31) on the back of the phone, just find the corresponding oeminfo file and the update file. flash the oeminfo file, put the update file from the rom zip in the dload folder and reboot using the 3 button combo till it says something about installing update[/url]
Click to expand...
Click to collapse
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
fabgav said:
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
Click to expand...
Click to collapse
first of all, no, p9 is a different phone, but you posted on the p9 lite forum. i'd suggest posting this question on the p9 forum.
i don't know exactly how it works for the p9, but it shouldn't be much different.
for the rom zip: inside that zip there's an update.app file, that file should indeed be put in a new folder called dload, but it won't be installed through twrp.
on the p9 lite it works like this: you flash the oemfile through twrp, and after that push and hold both volume buttons and the powerbutton till the phone reboots and shows an update progress screen, then you can release the buttons. now the update file will be installed. but then again, i don't know the procedure for the p9 so be sure to post your question on the correct forum.
edit: i've taken a look on that link to the stock rom you tried installing, it's a zip file that contains the dload folder, just put that folder on the root of your sdcard. do make sure it's the correct version.
you will have to flash the stock recovery for your phone however, and if the p9 works the same way as the p9 lite you should find an oeminfo file and flash that with twrp.
So sorry, I didn't realise I was in the lite forum!
I'll ask a mod to move, sorry and thanks for you help.
fabgav said:
So sorry, I didn't realise I was in the lite forum!
I'll ask a mod to move, sorry and thanks for you help.
Click to expand...
Click to collapse
here's a link to the oeminfo for eva -l9: https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903 i think that one should be flashed in twrp, and after that you can use the 3 button combo
no problem at all
fabgav said:
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
Click to expand...
Click to collapse
Hello
Here it is p9 lite.
Section p9 is here. https://forum.xda-developers.com/p9
I think you are looking for this.
https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
Yes the steps are.
Bootloader
Twrp
Flash Cxxxoeminfo
DLOAD Bxxx
SOLVED
First post updated with fix.
Thanks for all the help here on XDA
deleted by user
Any other place i can download the "dload" file beisides mega...please any help...
Yureka 2 :NO OS installed .Do you want to reboot ? Clicked reboot.Mobile hangs
Hi,
I tried to install Lineage OS 15.1 custom ROM using TWRP recovery in my Yureka 2 YU5551. I wiped out the data before flashing. During flashing I faced Error 7 and unable to install custom ROM.Twrp asked this- NO OS installed. Do you want to reboot? I Clicked reboot and my mobile not even booted properly. Still hangs. I tried to open recovery mode using the power button and volume up and volume down button. I am unable to go to recovery mode. When I connect my mobile to my laptop its not recognizing as the phone is not restarting.
Can someone plz help me how to install an OS and start my phone. Thanks in advance.
Thanks
Thinagharraj
Hello sir, please notice me. Can I possibly get another link to get the stock.img because the link that you gave was already not available. Hoping for your response. Thanks
I have sticker in recovery no OS installed + no backup + locked bootloader
What can I do
----------------------/----------------------
Any one please help me
Bootloader : Unlocked
Recovery : Revolution Nougat Recovery for p9 lite
Device : GT3 NMO-L22 (NEM-L22 oeminfo flashed)
So I've soft bricked my phone pretty much, I have tried plenty of methods to try and rollback to MM but have had absolutely no luck. I have been able to flash boot images, recovery images and system image files extracted from nougat update.app files and marshmallow update.app files but the phone will hang on "device is now booting" .
Either the dload method will keep giving errors or the extracted files wont work I have tried flashing some roms but still nothing. sort of dont know what to do but would flashing another devices oem info help to install update.app files via dload method ?
Any help would be greatly appreciated cheers
take image files from b100 update.App
Hi i got exactly same problem as your, i tried everything for like 8 hours and nothing successful, then i tried "Huawei Multiool" and flash recovery for honor 5c emui 5.0 then i rebooted my phone and it works i was ****ing happy because twrm not work for me
Sorry for my english
btw it doesnt depend whats your model there are also custom recoveries for p9 lite
links please Ive found links for both suggestions but not sure if Ive found the right ones thanks
Update : Okay so I need help still guys and didnt want to start another thread but I still have been unable to find an update package that will install using dload method. Please help I've tried everything including extracted img files using huawei update extractor. like i said in the op i dont know which update to download as I have tried alot and none of them seem to be doing the trick. please any help would be much appreciated
Edit : Have also tried the recommended fixes but none have made a difference unless im downloading the wrong files of course every single update file gives me the same error using dload method "incompatibiltiy with current version please download the correct update package"
so after what i thought would be an impossible fix i've finally found my solution, I dont know if this will work for everyone else but its definitely the easiest method I found through trial and error and trying way to many other methods i was hoping would work but here it goes.
Through the twrp 3.0.2 recovery recommended above I flashed hw_EU.zip recommended by user DRUGER in another thread for changing firmware to EU NEM-L51
after that I simply downloaded both the update.zip and update_data_full_hw_eu.zip for NEM-l51C432B120 and extracted only the update.zip file and placed the update.app file in a dload folder on the root of my SD card
I then wiped every partition apart from internal storage, oeminfo and sd card.
After that I tried to flash the update.zip giving me error 7 but I ignored it and then went on to flash the update_data_full_hw_eu.zip after that I wiped the cache and powered off the phone.
After that I used the 3 button method to go through to the update mode and for the first time ever I was able to install the update with no hitches, I am now on B130 build and honestly couldn't be happier I tried so many different firmware recommended everywhere but this was the only method that worked for me, It may not be the original model firmware and it may not work for other people but it worked for me so Im glad.
Also I may have made some unnecessary steps along the way but its better to include everything I did in case someone else decides to give this a try Im just happy to have a working phone again
Hey I need Nem L22 OEM can you please share here?
Fixed your device?
Just the device with proper OEM you can dload with proper update. App of yours oem.
After dload, not booting, all you need is to reboot to stock recovery and giving it a factory reset.
I can only find the one for l29 dual sim and need it for the single sim variant to try and flash via fastboot
Maybe download l09 firmware and extract ,there is a tool to do so.
I've tried the tool and it won't extract it for some reason hence asking for a little help
Does anyone have the full factory image for the VOG-L04? I mistakenly used a VOG-L09 image and soft bricked my device. Any help with a download link that works would be awesome.
Thanks!
OK, I found the firmware (I believe) Huawei P30 Pro VOG-L04 claro la VOGUE-L04D 9.1.0.185(C25E8R1P5) Firmware 9.0.0 r3 EMUI9.1.0 05015TJP [androidhost.ru].zip
I can share if anyone needs it. That being said, I can't seem to flash the device. When I try and do a forced install from the dload folder over OTG, The update starts and fails at 5%. Once it reboots I keep coming back to the yellow verbiage of something similar to "Your device has loaded a different operating system bla bla bla". Can anyone assist me in laying down the factory image and getting this back to being bootable?
viffer_man said:
OK, I found the firmware (I believe) Huawei P30 Pro VOG-L04 claro la VOGUE-L04D 9.1.0.185(C25E8R1P5) Firmware 9.0.0 r3 EMUI9.1.0 05015TJP [androidhost.ru].zip
I can share if anyone needs it. That being said, I can't seem to flash the device. When I try and do a forced install from the dload folder over OTG, The update starts and fails at 5%. Once it reboots I keep coming back to the yellow verbiage of something similar to "Your device has loaded a different operating system bla bla bla". Can anyone assist me in laying down the factory image and getting this back to being bootable?
Click to expand...
Click to collapse
I'm sorry, man. Your phone is totally rubbish. Because I made the same mistake. My phone has changed with a new one in the service.
I tried every way to save it. No luck. You have to send it to the service
viffer_man said:
OK, I found the firmware (I believe) Huawei P30 Pro VOG-L04 claro la VOGUE-L04D 9.1.0.185(C25E8R1P5) Firmware 9.0.0 r3 EMUI9.1.0 05015TJP [androidhost.ru].zip
I can share if anyone needs it. That being said, I can't seem to flash the device. When I try and do a forced install from the dload folder over OTG, The update starts and fails at 5%. Once it reboots I keep coming back to the yellow verbiage of something similar to "Your device has loaded a different operating system bla bla bla". Can anyone assist me in laying down the factory image and getting this back to being bootable?
Click to expand...
Click to collapse
You can't use dload firmware from 9.1 once you used EMUI 10 dload firmware and got softbricked. You can downgrade ONLY using HiSuite PC version and a functionall device powered on.
As i told you in PM, just wait for a proper VOG-L04 C431 cust dload firmware. ONLY flashing that firmware will revive your phone.
SilviuO
Will this firmware work? https://firmware.gem-flash.com/index.php?a=downloads&b=file&id=203710
viffer_man said:
Will this firmware work? https://firmware.gem-flash.com/index.php?a=downloads&b=file&id=203710
Click to expand...
Click to collapse
Nope, that firmware does exactly what it says and doesn't downgrade from EMUI 10 to EMUI 9.1. It's used only on EMUI 9.1 to downgrade to a previos version which allows to remove FRP locked Google account from phone.
Cheers,
SilviuO
I got the same problem Yesterday because i flash a vog-l09 firmware on my vog-l04, what i Made to make It work is flash the other 2 files of full firmware vía e-recovery because my dload menu wasnt avaible anymore, nos i have a fully working emui 10 vog-l09 firmware on my vog-l04, try that.
@sshinde555, m8, check the post above my mention, maybe you revive your device
Can you confirm which other two files you are referring to, please?? If this works I would be forever grateful! Also, how do you install the 2 additional files? Can you tell us the process you took.
SilviuO said:
@sshinde555, m8, check the post above my mention, maybe you revive your device
Click to expand...
Click to collapse
Which post buddy?
sshinde555 said:
Which post buddy?
Click to expand...
Click to collapse
This one, maybe his method (when it will explain it better) will work on your device. He revived his device using a VOG-L09 firmware in his VOG-L04 cust device. Maybe using VOG-L29 C431 firmware as he did you can turn on your VOG-L29 C675 cust device. In his attached picture you can see he has original CUST L04 with firmware from VOG-L09 C431.
internet6 said:
I got the same problem Yesterday because i flash a vog-l09 firmware on my vog-l04, what i Made to make It work is flash the other 2 files of full firmware vía e-recovery because my dload menu wasnt avaible anymore, nos i have a fully working emui 10 vog-l09 firmware on my vog-l04, try that.
Click to expand...
Click to collapse
sshinde555 said:
Which post buddy?
Click to expand...
Click to collapse
He's referring to post #7
internet6 said:
I got the same problem Yesterday because i flash a vog-l09 firmware on my vog-l04, what i Made to make It work is flash the other 2 files of full firmware vía e-recovery because my dload menu wasnt avaible anymore, nos i have a fully working emui 10 vog-l09 firmware on my vog-l04, try that.
Click to expand...
Click to collapse
Can you please tell us the process you used to install all files??
viffer_man said:
Can you please tell us the process you used to install all files??
Click to expand...
Click to collapse
Yes which 2 files you are referring? Please provide more details. With steps
Thanks in advance
Ok guys, I have figured this out. Here are the steps I took to install VOG-L09 Firmware on my VOG-L04
1) Downloaded VOG-L09 hw eu VOGUE-L09C 10.0.0.168(C431E19R2P5)
2) extract VOGUE-L09C 10.0.0.168(C431E19R2P5).zip to a folder on your desktop
*There will be 3 be 3 zip files extracted:
update_sd_base.zip
update_sd_cust_VOG-L09_hw_eea.zip
update_sd_preload_VOG-L09_hw_eea_R2.zip
3) Copy all 3 files to a folder named dload on to a USB drive
4) Goot to e-Recovery mode (Volume up + Power)
5) Select Software Update
6) Select USB-OTG Update
7) the first file (update_sd_base.zip) will install
8) unplug the USB from the pone, renome the update_sd_base.zip to something else
9) rename update_sd_preload_VOG-L09_hw_eea_R2.zip to update_sd_base.zip
10) insert the USB back into the phone and boot to e-recovery again, following steps 4-7
11) repeat steps 8-10 with the last file on the USB drive.
Good luck.
viffer_man said:
Ok guys, I have figured this out. Here are the steps I took to install VOG-L09 Firmware on my VOG-L04
1) Downloaded VOG-L09 hw eu VOGUE-L09C 10.0.0.168(C431E19R2P5)
2) extract VOGUE-L09C 10.0.0.168(C431E19R2P5).zip to a folder on your desktop
*There will be 3 be 3 zip files extracted:
update_sd_base.zip
update_sd_cust_VOG-L09_hw_eea.zip
update_sd_preload_VOG-L09_hw_eea_R2.zip
3) Copy all 3 files to a folder named dload on to a USB drive
4) Goot to e-Recovery mode (Volume up + Power)
5) Select Software Update
6) Select USB-OTG Update
7) the first file (update_sd_base.zip) will install
8) unplug the USB from the pone, renome the update_sd_base.zip to something else
9) rename update_sd_preload_VOG-L09_hw_eea_R2.zip to update_sd_base.zip
10) insert the USB back into the phone and boot to e-recovery again, following steps 4-7
11) repeat steps 8-10 with the last file on the USB drive.
Good luck.
Click to expand...
Click to collapse
Thanks for sharing this m8. I will ask users with softbricked device to try your method and try to revive theirs
viffer_man said:
Ok guys, I have figured this out. Here are the steps I took to install VOG-L09 Firmware on my VOG-L04
1) Downloaded VOG-L09 hw eu VOGUE-L09C 10.0.0.168(C431E19R2P5)
2) extract VOGUE-L09C 10.0.0.168(C431E19R2P5).zip to a folder on your desktop
*There will be 3 be 3 zip files extracted:
update_sd_base.zip
update_sd_cust_VOG-L09_hw_eea.zip
update_sd_preload_VOG-L09_hw_eea_R2.zip
3) Copy all 3 files to a folder named dload on to a USB drive
4) Goot to e-Recovery mode (Volume up + Power)
5) Select Software Update
6) Select USB-OTG Update
7) the first file (update_sd_base.zip) will install
8) unplug the USB from the pone, renome the update_sd_base.zip to something else
9) rename update_sd_preload_VOG-L09_hw_eea_R2.zip to update_sd_base.zip
10) insert the USB back into the phone and boot to e-recovery again, following steps 4-7
11) repeat steps 8-10 with the last file on the USB drive.
Good luck.
Click to expand...
Click to collapse
So if I follow these steps on my Canadian L04, will this work to convert my phone to the l09?
1212121212121212 said:
So if I follow these steps on my Canadian L04, will this work to convert my phone to the l09?
Click to expand...
Click to collapse
NO, you won't convert it to L09, it will still be L04, but you will flash L09 firmware on top of your L04 device
SilviuO said:
NO, you won't convert it to L09, it will still be L04, but you will flash L09 firmware on top of your L04 device
Click to expand...
Click to collapse
So I will have Android 10 if I do?
1212121212121212 said:
So I will have Android 10 if I do?
Click to expand...
Click to collapse
YES, if you follow @viffer_man steps from his post, you'll have. But be aware that usig his method will wipe your phone data. Backup before doing it.
For VOG-L09 C431 dload firmware, please check my post from here.
Hello! I would like to root my Realme c25s [RMX3195_11_A.19] phone. I can not find the necessary files to install twrp. Named Vbmeta.img and Recovery.img (Recovery is the TWRP firmware itself, but I couldn’t find the Vbmeta.img file ANYWHERE on the Internet that matches my firmware version). As far as I understand, both files must be of the same version (A.19 in my case), otherwise it is possible to turn the phone into a brick. If you have experience flashing this device of the same assembly as mine, or if you know how to do it, please attach ALL the files that you used to flash. Thank you!
Metro1919 said:
Hello! I would like to root my Realme c25s [RMX3195_11_A.19] phone. I can not find the necessary files to install twrp. Named Vbmeta.img and Recovery.img (Recovery is the TWRP firmware itself, but I couldn’t find the Vbmeta.img file ANYWHERE on the Internet that matches my firmware version). As far as I understand, both files must be of the same version (A.19 in my case), otherwise it is possible to turn the phone into a brick. If you have experience flashing this device of the same assembly as mine, or if you know how to do it, please attach ALL the files that you used to flash. Thank you!
Click to expand...
Click to collapse
your vbmeta can be found in the firmware file (ofp)