Hi there,
I finally got my MI11 (global version), but I'm quite disapointed because the primary function of the phone (making calls) seems not that great :/
The mobile signal strength is quite low at my house like 1 bar, that caused some quality drops while in call on my old MI9T but nothing very dramatic.
This new Mi 11 is having a lot of troubles on that point, sometimes outgoing calls hangs for 30+ seconds and fail, and when I can make a call, the callee is having a really bad time hearing me.
When in call if I put the phone on my desk, about 10 seconds later the call drops, I can hear the callee but the callee can't hear me and then the call drops.
Anyone experiencing such things?
Calls seems to work fine when I'm outside...
I had similar problems on my previous Lenovo z6 pro phone, the software replacement helped, you can also try to change the network settings in the additional menu by entering the code * # * # 4636 # * # *
patate30 said:
Hi there,
I finally got my MI11 (global version), but I'm quite disapointed because the primary function of the phone (making calls) seems not that great :/
The mobile signal strength is quite low at my house like 1 bar, that caused some quality drops while in call on my old MI9T but nothing very dramatic.
This new Mi 11 is having a lot of troubles on that point, sometimes outgoing calls hangs for 30+ seconds and fail, and when I can make a call, the callee is having a really bad time hearing me.
When in call if I put the phone on my desk, about 10 seconds later the call drops, I can hear the callee but the callee can't hear me and then the call drops.
Anyone experiencing such things?
Calls seems to work fine when I'm outside...
Click to expand...
Click to collapse
Better way is simply to ask at your provider VoLTE and above all VoWiFi (in your case)
Related
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
What headset are you using?
Does it have a delay without a headset?
On mine I get a delay with a headset that supports the handsfree profile (Jabra BT800) but not on a normal one, or without a headset.
My XDA2 did this also, but the XDA2 with WM2005 worked perfectly.
could be the time needed to find/load the ringtone ?
do you have caller id or ringtonex with different ringtones and/or pictures?
maybe loaded from memory card ?
audiblefrequency said:
Hello,
Recently I have been noticing that my IIi appears to inform me of incoming calls rather late. When I wear my bluetooth headset I can hear the incoming call in my headset but it takes at least 5-7 seconds before the ringer on my phone starts ringing. By the time the ringer starts ringing to let me know of a phone call I have maybe 3-5 seconds to answer it before my voice mail picks up. Does anyone else experience this problem? Are there any solutions? It almost seems like the cpu just does not have the power to process the incoming call that quickly. Any help would be appreciated.
Click to expand...
Click to collapse
I have the same problem with mine... I only get three rings to answer the phone - which can be pretty annoying!
I've not noticed whether having any form of headset makes a difference, though.
Ringing Delay
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Re: Ringing Delay
LYNDONSLANN said:
I upgaded to the latest version of software from 02 last week, since then I get what I can only describe as a "stutter" when the phone rings. I am also getting a lot of lost calls i.e the phone rings twice then says I have a missed call, but the people ringing me say that it goes to ansaphone ???
Click to expand...
Click to collapse
I have the same problems and the bluetooth flattens the battery in 4 hours. I used to have the XDA II with Sins cooked 2K3se and it was perfect, unfortunately I gave it to my son who won't give it back.
Hey, I have same problem, I got the latest ROM, and since then it got even worse. Does anybody knows how to fix the problem, modify ROM, or something, PLEase help.
Thank you.
the only solution i have to date is to change the answerphone delay, you can find your networks status codes here:
http://www.expansys.it/forumthread.asp?code=K700&thread=72
i changed mine to 30 secs to give me a better chance!
cheers
Hi all,
Running my Orange UK (unlocked and on T-mobile) with Duttys 6.1 ROM and radio 1.64.08.21 and seem to have an issue when answering incoming calls.
I'm sure I've seen this reported elsewhere but can't find it for the life of me now!
When I recieve an incoming call and press the green answer button, there is about a 2 second delay before the call is connected. If you're not quick, TM voicemail takes the call. Seems to be a second of ringing on the calling handset before it starts ringing on the TYTN 2 as well.
Can someone confirm that I have seen this reported elsewhere and post a link or suggest if this is a ROM issue, radio issue or general Kaiser issue?
Only kept the orange rom for about 48 hours and went straight to Duttys so cant really recall if it happened on the orange rom.
Many thanks guys!
Not exactly the same problem, but I have a similar issue on my Tilt with my bluetooth headset. I press the headset button to answer and don't hear anything for about 1.5 seconds. Usually, the person calling is saying "hello? hello?" by the time I actually get connected.
The headset (Plantronics 510) works great for everything else.
Have you tried the following. I've seen this help some people including myself.
Start > Settings > Phone > Services Tab .. Highlight Call Forwarding and hit Get Settings ..
Forward phone calls only if: Forward After: there is a drop down box that some providers allow you to set the time before the call goes to viocemail. (5, 10, 15, 20, 25 and 30 seconds) .. I think default was 20 on my phone/provider.
If your network provider doesn't allow changes from your phone you might have to call their customer service and request they manually change the network settings for you.
Same problem here as well! Same Rom (Dutty's), same network (Orange).
And I've only flashed last week and was on the standard Orange Rom before and there wasn't a delay. Any help is appreciated as this is a right pain.
I've changed to 30 seconds before diverting to the answerphone - so thanks for that response at least.
PsyOpWarlord said:
Have you tried the following. I've seen this help some people including myself.
Start > Settings > Phone > Services Tab .. Highlight Call Forwarding and hit Get Settings ..
Forward phone calls only if: Forward After: there is a drop down box that some providers allow you to set the time before the call goes to viocemail. (5, 10, 15, 20, 25 and 30 seconds) .. I think default was 20 on my phone/provider.
If your network provider doesn't allow changes from your phone you might have to call their customer service and request they manually change the network settings for you.
Click to expand...
Click to collapse
Had no idea that screen was there... Thanks! I've changed my call forward to 25 seconds, 'cause I had always felt it was going to vms too quickly.
Gavin
I had this issue myself with Dutty's V4 RTM (WM 6.0) rom. Pressing the Green button would result in a 2 second delay in being able to answer the phone, but if I used the left soft key to answer, there was no delay.
Same problem here. T-Mobile vanilla ROM. Can take up to 5 seconds for the call to reach my earpiece.
Solved it!
I had seen elsewhere that turning off the kepad sounds and turning off smart dialing could help, but I can't find a smart dialing option in the phone options.
Just tried switching the the Windows dialler rather than HTC and turning off auto Audio record on the Resco recorder which I had forgotten about.
After bit of playing, it appears (quite obviously now) to be the Audio recorder!
Used to use this on my wizard without any notable problems, but seems to be an issue on the Kaiser. It answers and hangs up in an instant now
A bit specific, but if any of you guys have this kind of thing installled and configured, try turning it off?!
Thanks for the replies and suggestions and hope you get it sorted too!
I don't have Resco audio installed and it only happens occasionally but when it does it usually happens a few times in a row.
Sometimes I also get the ringtone coming through the BT headset while the kaiser sputters into life. Then a 2 second delay
before the BT headset beeps and the caller can hear me.
Occasionally, I can hear the caller at the same time as I can hear the ringtone. Just another 'feature' I guess.
"If you're not quick, TM voicemail takes the call"
There's usually a few seconds delay between 'hearing' the other phone ring and it actually ringing. Can be up to 5 seconds.
some default ring tones are timed 3+ seconds apart. Choose the wrong ring tone and ring tone type (increasing volume) and
it's possible to miss the first 2 rings which, if the answer after x seconds delay is set to 20 seconds gives someone about
5 seconds to answer the phone or miss the call. My GF suffered 'missed call syndrome' after fiddling with her Hermes.
You can adjust the voice mail answer after x seconds time in start/settings/phone/services/call forwarding/get settings
Forward calls only if [no answer should be ticked]
Drop down menu Forward after ..
Mine is set to 30 seconds.
Hello from, Norway!
I got this beautifull phone yeasterday,. Perfect screen and camera but it has 1 problem. When I call with 3g on. I hear static sounds when people talk to me. When they stop the static is gone. And when I turn of 3g the call quality is perfect. Is this normal?
Bump
I got my 32 CW N6 on Weds, and I've experienced a very strange issue with an incoming call twice now. The phone starts to ring but the ringer is all garbled/distorted, and the screen is unresponsive. It seems to stop ringing fairly quickly, and everything goes back to normal. I do live in a spotty 4G LTE area, and notice the signal meter showing blank often, or a little showing (which I know may be a separate issue from another thread) but checking signal strength, it averages about -105dbm sometimes a little higher/lower, depending on where in the house I am. My previous LG G2 and G3 would regularly switch between 4g/3g throughout the day. The phone was set to Global and I did just change it back to LTE (I thought I'd done it earlier, but maybe I had inadvertently set it back) so not sure if that will make any difference... Wondering if anyone else has experienced this?
edit: I realize that voice is over cdma, but knowing the N6 doesn't do simultaneous voice/data over verizon like the turbo/moto x, not sure if there could be some correlation.
braxync said:
I got my 32 CW N6 on Weds, and I've experienced a very strange issue with an incoming call twice now. The phone starts to ring but the ringer is all garbled/distorted, and the screen is unresponsive. It seems to stop ringing fairly quickly, and everything goes back to normal. I do live in a spotty 4G LTE area, and notice the signal meter showing blank often, or a little showing (which I know may be a separate issue from another thread) but checking signal strength, it averages about -105dbm sometimes a little higher/lower, depending on where in the house I am. My previous LG G2 and G3 would regularly switch between 4g/3g throughout the day. The phone was set to Global and I did just change it back to LTE (I thought I'd done it earlier, but maybe I had inadvertently set it back) so not sure if that will make any difference... Wondering if anyone else has experienced this?
edit: I realize that voice is over cdma, but knowing the N6 doesn't do simultaneous voice/data over verizon like the turbo/moto x, not sure if there could be some correlation.
Click to expand...
Click to collapse
Just noticed this myself. I have had the phone for a few weeks now and it was the first time this happened. The screen was off and didn't light up. The phone did respond when I unlocked it though and I was able to answer.
I haven't had the unresponsive screen anymore, but I have had a couple calls today again where the ringer got all distorted and the screen didn't turn on.
When the screen seemed unresponsive, I did have a different case on which covered the buttons so maybe I was just hitting the wrong button... in any case it's mildly annoying.
Having the same issue. It goes garbled and if I don't answer right away it will end the call
Sent from my Nexus 6
braxync said:
I haven't had the unresponsive screen anymore, but I have had a couple calls today again where the ringer got all distorted and the screen didn't turn on.
When the screen seemed unresponsive, I did have a different case on which covered the buttons so maybe I was just hitting the wrong button... in any case it's mildly annoying.
Click to expand...
Click to collapse
Same here.. Verizon, stock 5.01 nexus 6. Get the garbled ring.. Sometimes the ring just for a split second, then silent too.
braxync said:
I got my 32 CW N6 on Weds, and I've experienced a very strange issue with an incoming call twice now. The phone starts to ring but the ringer is all garbled/distorted, and the screen is unresponsive. It seems to stop ringing fairly quickly, and everything goes back to normal. I do live in a spotty 4G LTE area, and notice the signal meter showing blank often, or a little showing (which I know may be a separate issue from another thread) but checking signal strength, it averages about -105dbm sometimes a little higher/lower, depending on where in the house I am. My previous LG G2 and G3 would regularly switch between 4g/3g throughout the day. The phone was set to Global and I did just change it back to LTE (I thought I'd done it earlier, but maybe I had inadvertently set it back) so not sure if that will make any difference... Wondering if anyone else has experienced this?
edit: I realize that voice is over cdma, but knowing the N6 doesn't do simultaneous voice/data over verizon like the turbo/moto x, not sure if there could be some correlation.
Click to expand...
Click to collapse
my phone won't run for more than 2 days before this happens: incoming call OR outgoing call. ring works, call answered, then silence. call counter is ticking away, the call is in progress, just no audio on either end!. click Hangup button, and it takes like 60 seconds to hangup. reboot, phone is fine for 2ish days. or less.
Hi so i updated my G920A to to EQCF (Nougat) baseband recently via Odin. Most of the times when i receive a call and i try to swipe to receive it, i cannot pick up the call, it just goes to the ringing state after a little bit of time. I cannot reject the call neither can i pick up the call. I have to restart my phone every time this happens. And it happens after every 10 hours or so. Secondly, e.g. in my room a previous HTC M8 worked perfectly (using the same network ofc), but most of the time the other person cannot hear me from my S6. Sometimes there is a loud static noise in my earpiece.
Do you guys think this is a problem with the phone or a bug in the software?