Database Develop

plaese help me a real problems :(

hey guys,
plaese i need your help my problem is that am doing full formating for my android (recovery>advanced>and i doing full format(format datadata,format data,format system,format sdcard,format cache etc..) after then i go to reboot system and my phone dont get up and after then i try to fix it with odin (to back to stock rom and after than to reinstall ics rom) so in odin after that i put(pit pda csc) its write to me in the windows that: <OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVU.tar.md5 is valid.
<OSM> MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
plaesee help mee fasterrr

okay guys i solved it thanks

[Q] Odin fails in flashing my SGS1

I just wanted to upgrade my phone from 2.2 to 2.3.3 and that what I got :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJVH_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVO.tar.md5 is valid.
<OSM> CSC_NEE_JV3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
in the first time it shown me 1 fail
my phone is on Download Mode and connected with usb cable to my pc, the phone is not wiped and on debugging usb mode

remove the battery, wait five minutes and retry

Arnoj said:
remove the battery, wait five minutes and retry
Click to expand...
Click to collapse
I solved this, installed Dark Knight 5.5 and now the phone enters to recovery mode in the turn off and I get the message : E: Missing bitmap virtual_keys (code-1)

[Q] help!

Hi, i flash samsung galaxy s5830m with a firmware of my samsung 6102 galaxy y duos for error, but the phone power on, and inmediately power on led flash of camera and don't show nothing.
don't enter in:
arm9 mode
recovery
odin mode
help and odin show this
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830M_WHLA1.tar.md5 is valid.
<OSM> MODEM_S5830M_WHLA1.tar.md5 is valid.
<OSM> CSC_S5830M_UUBLA1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830M_WHLA1.tar.md5 is valid.
<OSM> MODEM_S5830M_WHLA1.tar.md5 is valid.
<OSM> CSC_S5830M_UUBLA1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
and don't run more...

Note 3 Upgrade Help

Hello everyone need some advice/help.
I have an ATT note 3 running 4.3 and I'm ready to upgrade to something newer due to issues. I'm looking to do 5.1.1 or 6.0 but someone told me 6.0 doesn't support call audio. I tried to download and flash from here : http://forum.xda-developers.com/galaxy-note-3/development/rom-unofficial-cyanogenmod-13-0-t3238064 under older versions
but the files do not show up in my Odin version is 3.10.7. I downloaded version cm13.0 20160128. I also downloaded banks dynamic g apps but still see nothing under the download files in odin. Any help is greatly appreciated. I can see the folders but they are all empty or do not contain files that odin recognizes.

So I am even worse off now. I did a factory reset and it wiped everything but it shows my phone is still rooted. It will not connect to play store and wont sync my gmail account though it lets me sign in now. It is also not reading the apps on the sd card. Please help!! It shows 5 gb of data on sd card but no apps.

Ok,
First this is if your note 3 is an AT&T branded device. The boot loader is locked so you can not use a CM 13 ROM. There are only certain workarounds we can do and ROM's to choose from. The highest we can go is OC1 and OC2. This is because we do not have a Kernel to allow us to go higher.
First things first, is to get your phone back to a usable state.
Go to this link http://forum.xda-developers.com/showthread.php?t=2703006
Read it beginning to end, download all the files and then reread the instructions again in the first post. It sounds like you need to start by going back to NC2 and work your way forward. go down to the section that starts like this.
This is from Carl1961, all thanks go to him! He has saved my bacon many times!
UPDATING TO LOLLIPOP AND KEEPING ROOT
FIRST DO THIS
1. You must have Safestrap Recovery working (you can boot to safestrap) If Not go to NC2 Files and Install NC2 Odin Files and get safestrap working.
2. First Do a TWRP Backup if you have not done one.
3. download below files and copy to your SDCARD
"N900A_NL1_Stock_Rooted_Backup" from [How-To] Root N900AUCUDNL1 4.4.4 (12-24-2014) THANKS !!! @muniz_ri and copy to your TWRP backup folder (here is my TWRP Folder TWRP\BACKUPS\0b70b440\N900A_NL1_Stock_Rooted_Backu p
SM-N900A_NL1_Firmware_Recovery-Flashable.zip
N900A_NL1-OC1-KeepRoot_OTA.zip
UPDATE-SuperSU-v2.45.zip THANKS !!! @Chainfire
SM-N900A_N900AUCUEOC1_KERNEL_Recovery-Flashable.zip
1. Boot to safestrap recovery, Press Wipe and slide the slider to ok the wipe.
2. Restore Backup N900A_NL1_Stock_Rooted_Backup This gives us rooted NL1
3. Without leaving Recovery install SM-N900A_NL1_Firmware_Recovery-Flashable.zip This installs the NL1 firmware (or N900A_NL1-OC1-KeepRoot_OTA.zip will fail)
4. Without leaving Recovery install N900A_NL1-OC1-KeepRoot_OTA.zip
5. Without leaving Recovery install UPDATE-SuperSU-v2.45.zip to update SuperSu for Lollipop
6. Without leaving Recovery install SM-N900A_N900AUCUEOC1_KERNEL_Recovery-Flashable.zip to boot to New Lollipop Update.

Well I am trying to revert back to original 4.3 then upgrade and re root but I am getting error messages in odin.
ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N910AATT1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas? These files were from wen I first rooted my phone in 2014.

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N910AATT1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)

vv<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900AUCUBMI9_N900AATTBMI9_N900AUCUBMI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Made it to here. On device it says SW REV CHECK FAIL : [sbl1] Fused 2> Binary 1

Try older version of ODIN. This is a common problem when using older files/system.

Need help updating unlocked AT&T Note 9.

I have an unlocked AT&T Note 9 that is stuck on Android 8.1.0 Patch 11/1/18.
There is higher existing firmware I have found but I am having no luck getting it to update via OTA where it is on MetroPCS now, and smart switch says it is up to date. When I try to update using Odin 3.14 using a couple of different firmware's I get the same error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 7842 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7842 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Can anyone please help??? I have been reading and working on this for about a month now with no luck.

Try a computer with USB 2.0 or buy a USB 2.0 port hub.

dehart420 said:
I have an unlocked AT&T Note 9 that is stuck on Android 8.1.0 Patch 11/1/18.
There is higher existing firmware I have found but I am having no luck getting it to update via OTA where it is on MetroPCS now, and smart switch says it is up to date. When I try to update using Odin 3.14 using a couple of different firmware's I get the same error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 7842 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7842 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Can anyone please help??? I have been reading and working on this for about a month now with no luck.
Click to expand...
Click to collapse
You're trying to update to ARL1?