Database Develop

[solved] Is this Odin setup correct to flash JVO?

Hello,
1) if I wanted to flash to JVO with Odin, is the setup in the attached pic correct (especially the files on PDA, PHONE, CSC and repartition ticked)?
2) Wasn't there a bootloader I needed to flash? I think I read somewhere the bootloader changed with GB.

Landorin said:
Hello,
1) if I wanted to flash to JVO with Odin, is the setup in the attached pic correct (especially the files on PDA, PHONE, CSC and repartition ticked)?
2) Wasn't there a bootloader I needed to flash? I think I read somewhere the bootloader changed with GB.
Click to expand...
Click to collapse
1)Yup
2)The bootloaders are included in the file you have ( See where it says sbl in the file name of the PDA )

Yeah saw that SBL and that made me suspicious whether that file really should go into the PDA slot and leave the bootloader slot blank.

Landorin said:
Yeah saw that SBL and that made me suspicious whether that file really should go into the PDA slot and leave the bootloader slot blank.
Click to expand...
Click to collapse
Nope leave it EXACTLY as you have it there mate and you are good to go.

and repartition has to be ticked as well, right?

Landorin said:
and repartition has to be ticked as well, right?
Click to expand...
Click to collapse
Yes.
You are using a pit file so you need repartition ticked.

Thanks a lot for the quick help!

Landorin said:
and repartition has to be ticked as well, right?
Click to expand...
Click to collapse
no don't repartition unless you want to in which case you need ONE EXTRA FILE: 512.pit!! You sound like a newbie so depending where you are coming from -stock firmware-wise, by all means repartition but you must obtain the 512.pit that you add to odin and flash with the rest of the rom. WARNING: this will wipe all your data and apps and repartition your phone including the sd card. make sure that you remove any external SD cards if you have one and the SIM card too...for peace of mind
UPDATE: oops! England has beaten Algeria...in cyberworldcup

I'd consider myself as noob, yep.
I thought I have to repartition when upgrading from JPY (2.2.1) to JVO? I don't know when this has to be done. Just saw the PIT file recommended for JVO on samfirmware and somehow assumed I have to repartition.
So what should I do, what's the difference if I do or not do it?
I backed up all data and wiped the phone before so there's not much on it right now (and no lagfix or so used, just stock rom with CF kernel).

Landorin said:
I'd consider myself as noob, yep.
I thought I have to repartition when upgrading from JPY (2.2.1) to JVO? I don't know when this has to be done. Just saw the PIT file recommended for JVO on samfirmware and somehow assumed I have to repartition.
So what should I do, what's the difference if I do or not do it?
I backed up all data and wiped the phone before so there's not much on it right now.
Click to expand...
Click to collapse
if you're sure that you used the same pit file as before i.e; 512.pit then you don't have to repartition at all.....if in doubt then repartition. BTW which pit file did you see on samfirmware.com? Should I assume that this is your first rom flashing from stock JPY? Also, make sure that you use the JVO rom that includes GB bootloaders.

Before? I never flashed a full ROM via Odin, only kernel (CF), thus I never re-partitioned myself.
Until now I used KIES always to flash ROMs.
If re-partitioning works like on a HDD I guess then this can be skipped unless something changed partition wise from Froyo to GB?
So do I need to re-partition at all?

Hey guys, gonna steal the end of this thread.
Currently I am on 2.2:
PDA: JPA / PHONE: JPP / CSC:JP7 (MET)
I want to use ODIN to upgrade to STOCK 2.2.1 and for it to change the CSC to XEU so that 2.3.3 (and future updates) will be done through kies automatically.
Can somebody confirm how I do this? Which file do i need to d/l - all three? And do I (and why) need to repartition?
Thanks in advance

Unregistered. said:
Hey guys, gonna steal the end of this thread.
Currently I am on 2.2:
PDA: JPA / PHONE: JPP / CSC:JP7 (MET)
I want to use ODIN to upgrade to STOCK 2.2.1 and for it to change the CSC to XEU so that 2.3.3 (and future updates) will be done through kies automatically.
Can somebody confirm how I do this? Which file do i need to d/l - all three? And do I (and why) need to repartition?
Thanks in advance
Click to expand...
Click to collapse
If you used Kies anyway, why not use it now to update to 2.2.1? Afaik you can change the CSC with market apps (think I read that somewhere but someone may want to confirm this). Anyways, you could just stick with your normal CSC as GB will be released to the rest of Europe anyway.
Currently, it's uncertain whether there will be more updates after GB afaik.
But yes, our question remains: do we have to re-partition at all if we only used Kies so far to update ROMs?

Landorin said:
If you used Kies anyway, why not use it now to update to 2.2.1? Afaik you can change the CSC with market apps (think I read that somewhere but someone may want to confirm this). Anyways, you could just stick with your normal CSC as GB will be released to the rest of Europe anyway.
Click to expand...
Click to collapse
Tried changing the CSC but it's didn't work. I'm with meteor and they are useless. So what i want is the stock 2.2.1 for UK and ireland as if it was d/l form kies and be on my way

Unregistered. said:
Hey guys, gonna steal the end of this thread.
Currently I am on 2.2:
PDA: JPA / PHONE: JPP / CSC:JP7 (MET)
I want to use ODIN to upgrade to STOCK 2.2.1 and for it to change the CSC to XEU so that 2.3.3 (and future updates) will be done through kies automatically.
Can somebody confirm how I do this? Which file do i need to d/l - all three? And do I (and why) need to repartition?
Thanks in advance
Click to expand...
Click to collapse
Official Samsung GB for UK has already rolled out, it's called XXJVO and believe me once you've done your first ODIN rom flashing you will never stop flashing other..(custom roms and kernels) if there're any geeky tendencies inside you and just waiting to be released... see this thread and all your fears will be assuaged!
http://forum.xda-developers.com/showthread.php?t=1011901

Widget21 said:
see this thread and all your fears will be assuaged!
http://forum.xda-developers.com/showthread.php?t=1011901
Click to expand...
Click to collapse
Thanks! There it says:
"Note: Re-partition is not a must, use it only if you need to change partition sizes on the device, but in most cases you will not need to repartition at all." question answered.
@Unregistered: you could use I9000XXJPY from samfirmware, JPY was the one that was offered to me by Kies back then (German unbranded SGS). But someone may want to confirm this to you first, as I see lots of others 2.2.1 ROMs there and not sure what the difference is. Samfirmware offers a single file and once extracted you should have 3 files.
I just wonder why the 2.2.1 ROM files do not show on that website which CSC is used, maybe it's universal or something?
Well, I guess Widget21 has a point here. If you are willing to flash now with Odin, you might be willing to do it with GB too, then the CSC won't matter (it doesn't matter much anyway as I learned).
Just be sure your 3 button combo is working and that you connect with direct USB.

Landorin said:
Thanks! There it says:
"Note: Re-partition is not a must, use it only if you need to change partition sizes on the device, but in most cases you will not need to repartition at all." question answered.
@Unregistered: you could use I9000XXJPY from samfirmware, JPY was the one that was offered to me by Kies back then (German unbranded SGS). But someone may want to confirm this to you first, as I see lots of others 2.2.1 ROMs there and not sure what the difference is. Samfirmware offers a single file and once extracted you should have 3 files.
I just wonder why the 2.2.1 ROM files do not show on that website which CSC is used, maybe it's universal or something?
Well, I guess Widget21 has a point here. If you are willing to flash now with Odin, you might be willing to do it with GB too, then the CSC won't matter (it doesn't matter much anyway as I learned).
Just be sure your 3 button combo is working and that you connect with direct USB.
Click to expand...
Click to collapse
Is it JPY or JPX for UK (XEU)?
I dont want to flash gingerbread. Not yet anyway.

Landorin said:
Thanks! There it says:
"Note: Re-partition is not a must, use it only if you need to change partition sizes on the device, but in most cases you will not need to repartition at all." question answered.
@Unregistered: you could use I9000XXJPY from samfirmware, JPY was the one that was offered to me by Kies back then (German unbranded SGS). But someone may want to confirm this to you first, as I see lots of others 2.2.1 ROMs there and not sure what the difference is. Samfirmware offers a single file and once extracted you should have 3 files.
I just wonder why the 2.2.1 ROM files do not show on that website which CSC is used, maybe it's universal or something?
Well, I guess Widget21 has a point here. If you are willing to flash now with Odin, you might be willing to do it with GB too, then the CSC won't matter (it doesn't matter much anyway as I learned).
Just be sure your 3 button combo is working and that you connect with direct USB.
Click to expand...
Click to collapse
JVO has multiCSC and UK's xeu is included in it so no need to worry about changing CSCs...remember the 'Thanks' button is there for a reason

@Unregistered: yeah, sorry, that's what I meant. If you wanna flash GB in the future you might want to do it with Odin and then the CSC shouldn't matter anymore.
For some reason, I'm unable to find out the CSC on the file and it's not listed. The JPY I downloaded from samfirmware recently has DBT as CSC (Germany). If you download the JPX file and extract it the CSC file might tell which region it is (as in my case).
@Widget21: I used my thanks feature up for today (5 max). I'll try tomorrow again.

I just downloaded this:
http://hotfile.com/dl/100618077/49a97b4/I9000XXJPY.rar.html
JPY_JPY_JPY.tar. I thought i was getting the three files. Where do i go from here

[Guide] Changing CSC Galaxy Tab 10.1

Hi guy,
till Apple fights against Samsung the Galaxy Tab 10.1 is not longer availe in Germany. We can oder EU-models but the CSC and region code isn't "DBT" to get right special apps.
So I started to solve the problem by myself. Lot's of result bei google doesn't work for me, so here are the steps I do to get right product code (also shown in KIES )
Before anything, I hope you have an /efs folder backup.
1) Root your device (how-to you can find here http://forum.xda-developers.com/showthread.php?t=1239185 thanks djR3Z)
2) Download your CSC you would like to have from this post (http://forum.xda-developers.com/showthread.php?t=787163 thanks bloodrider)
3) Install RootExplorer from market to copy the CSC to /system/csc
4) Download TerminalEmulator from the market and install
5) Start TerminalEmulator and use the code from bloodrider (http://forum.xda-developers.com/showthread.php?t=787163)
6) At this point you will get a list of all CSC also the one you added before. After that system will reboot an install.
7) After reboot connect you tablet to KIES an show which product code Kies get
Next step for me I flash an older firmware connected to KIES again an update to new version without get lost the new region code.
Do everything on your own risk, for me it works great.

You could also just download CSC Changer for Galaxy S from the Market.
Two clicks and you're done.

If the CSC is already there that could also be a solution, otherwise not

Use US bought Galaxy Tab in Germany
I have another question (sorry if this has been addressed somewhere already):
- A friend wants me to bring him the US WIFI version to Germany. In case of a warranty issue is it covered or is the are Samsung Europe group that would support it (cause its not sold in Germany?)
thanks a lot

Anyone with a nordic galaxy tab 10.1 3g from Telia that can tell me their original CSC? I can't seem to find the right on for that.

snack23 said:
If the CSC is already there that could also be a solution, otherwise not
Click to expand...
Click to collapse
That is true but do you know what the CSC actually includes?
I don't think using the CSC from a different device is a good idea.
1. You would change the CSC Version to "I9000OXAJM1".
2. You would flash a different SW_configuration.xml
3. You would flash a different others.xml

Doesnt seem to work either. I still get "this blah blah blah" in kies.
XEE for nordic countries and KG7 version (I know the local on in the stores had this)

Figured it out. To get stock on your nordic GT7500 from Telia do:
1. Get the KG9 firmware from samfirmware.com
2. Flash it
3. Down load the scs switcher from the market, just do a search for samsung scs. Or click
4. Change CSC to NSE
5. Done - you can update to KI1 over kies.

siggehandf said:
Figured it out. To get stock on your nordic GT7500 from Telia do:
1. Get the KG9 firmware from samfirmware.com
2. Flash it
3. Down load the scs switcher from the market, just do a search for samsung scs. Or click
4. Change CSC to NSE
5. Done - you can update to KI1 over kies.
Click to expand...
Click to collapse
Sent you a PM.
Maybe someone else would like to know the answer my question, Did you still have root and CWM after flashing stock rom, and isent the local SCS nee for denmark ?

Thought I answered it?
Anyway, yes you'll lose root, but it takes 1 min to get it back. After kies is done. Go into download mode and flash clockwork recovery from Odin. Then just push root from there, works like a charm. You can find the root flash thread somewhere in this forum. Pm if you need morehelp then that.
About csc, I thought NEE was Danish as well, but Kies refuses to accept that csc. You'll get some Swedish bloat ware after flashing. Easily removed by root explorer or titanium backup.

pkoper said:
That is true but do you know what the CSC actually includes?
I don't think using the CSC from a different device is a good idea.
1. You would change the CSC Version to "I9000OXAJM1".
2. You would flash a different SW_configuration.xml
3. You would flash a different others.xml
Click to expand...
Click to collapse
The changing of CSC is only temporary because after flashing a new firmware, maybe from europe, you will get the original CSC from the image

snack23 said:
The changing of CSC is only temporary because after flashing a new firmware, maybe from europe, you will get the original CSC from the image
Click to expand...
Click to collapse
Nobody said its not temporary, so whats your point?

Is it possible to change my CSC code on my Galaxy Tab 10.1 3G from NSE to NEE?
I would like to get the nordic firmware for my tab rather than the Telia one, because Telia has a lot of stupid programs with the firmware I can't use, or would like to use.

Thanks for the guide. I can't find the CSC for Hong Kong, anyone know?

King Canute said:
Is it possible to change my CSC code on my Galaxy Tab 10.1 3G from NSE to NEE?
I would like to get the nordic firmware for my tab rather than the Telia one, because Telia has a lot of stupid programs with the firmware I can't use, or would like to use.
Click to expand...
Click to collapse
Yes, you can. But you'll need Root and the CSC application from the market. If that fails, just follow what I did on the main page and pick NEE afterwards, then it should update to 3.2 OTA.

[Q&A]Call getting silent in between - XXLA4

I was facing some issue during call, it was getting silent (receiver couldn't hear voice for few sec)
This starts happening after i flashed to LA4
First I ignore it, believed it cud be due to network problem. But it was happening regularly. By the time i tried
WIpe Data, removed some SW, which i thought causing error
Reflash LA4 again, but there was no result.
Last 3 days back I have changed Radio, Basically I am in india, I was using other radio, That may be the cause. ( I am not sure it can be possible)
But Now I have
Build version XXLA4
Kernel CF Root LA4
Baseban DDKL1
N since 3 days, not a single time it happened.
May be helpful to others anyway.

dr.ketan said:
I was facing some issue during call, it was getting silent (receiver couldn't hear voice for few sec)
This starts happening after i flashed to LA4
First I ignore it, believed it cud be due to network problem. But it was happening regularly. By the time i tried
WIpe Data, removed some SW, which i thought causing error
Reflash LA4 again, but there was no result.
Last 3 days back I have changed Radio, Basically I am in india, I was using other radio, That may be the cause. ( I am not sure it can be possible)
But Now I have
Build version XXLA4
Kernel CF Root LA4
Baseban DDKL1
N since 3 days, not a single time it happened.
May be helpful to others anyway.
Click to expand...
Click to collapse
Hi,
Me too have the same issue ever since flash to LA4 from KL1.
Now full reset and flash back to my stock ROM still having the same issue.
What you mean by Radio?
Care to guide me?
Thanks

Ya sure let me tell do u have rooted note?
N tell me what u can see in about phone?
Sent from my GT-N7000 using xda premium

This is what my stock is after I unroot from the guide you created.
Singapore Singtel user here.
PDA: N7000DXKL1
Phone: N7000DXKJ3
CSC: N7000OLBKJ6
Build Info: Fri De3c 9 13:05:41 KST 2011
ADROID Version
2.3.5
BaseBand Version
N7000DXKJ3
Kernal Version
2.6.35.7-N7000DXKL1-CL798631 [email protected]#2
Biuld Number
GINGERBREAD.DXKL1
---------- Post added 7th February 2012 at 12:00 AM ---------- Previous post was 6th February 2012 at 11:50 PM ----------
After flashing and toying with Darky.... RocketRom.......Chracks..
Now I unroot and flash to my stock ROM.
N7000DXKL1 --2.3.5 2011 December
N7000OLBKJ6 --Singapore (SingTel)
still got voice issue....
going to root again now and flash via Mobile Odin Pro in your guide to latest updated ROM
N7000DXLA1 --2.3.6 2012 January
N7000OLBKL2 -- Singapore (Singtel)

What exactly I did is, I have replaced Modem with my regional ROM.
e.g. After flashing with LA4, My device had
Build version XXLA4
Baseband(modem) XXLA4
Kernel XXLA4 (CF Root)
Now after this i have flash only modem part with Mobile odin pro, n i have select modem of my reional ROM
Now I have
Build versio XXLA4
Baseband (Modem) DDKL1
Kernel XXLA4 CF Root
Now i have no issue

cool.....
so is it the same method as this guys in the last post?
http://forum.xda-developers.com/showthread.php?t=1405932
please guide me how you select and which file.

No, changing CSC is different.
Actually if you are flashing ROM of your home region then i dont think, yu need this.
In my case i was using non regional Modem, thats why i have flashed only modem of my home stock ROM.

Hi,
I intend to flash to RocketRom again and use your method to flash to my home stock modem.
So which file and input should i select?

You can use same tar file of your Home Stock ROM.
Download n extract your home stock file n put in SD card.
open mobile odin - select - modem - point to your stock Home tar file - n flash.
It will flash only modem.
Input your result, may be helpful to others

dr.ketan said:
You can use same tar file of your Home Stock ROM.
Download n extract your home stock file n put in SD card.
open mobile odin - select - modem - point to your stock Home tar file - n flash.
It will flash only modem.
Input your result, may be helpful to others
Click to expand...
Click to collapse
Thankz.
Will update here upon my finding.
Appreciate your guidance
Cheers.....

@dr.ketan I have EXACTLY same problem. It happens in 5% to 10% percent calls, and so is why I have been rather ignoring it, although was always sure its not network related (I am based in Gujarat (ahmedabad), and am on Vodafone network).
In fact I have had this issue when I bought my first galaxy note in Nov, that had KL1 and I believe I used to have it over 40% to 50% and I noticed it improved after I got an OTA update to KL3, but still had this issue of calls getting silent, for more than% 15 to 20% times.
This month I changed my galaxy note for a white one, and the new device came with KL3 pre-installed. and I used to have almost negligible issues of silent calls.
Last week I flashed LA4 (Germany), {in fact I believe u will recall I discussed this with you}, and I notice after the update I am encountering this silent call issue for 5% to 10% times.
I am not yet rooted on this new LA4, so does it mean to flash the radio alone, I should root, which apparently would mean I will have to downgrade to stock KL3, root, reflash stock LA4 using mobile odin. I was hesitating to downgrade to stock KL3 because I guess its a WIPE version and I don't want to loose my few important settings. So, is there a way to flash the suggested RADIO without rooting my existing LA4?

Ravindra9 said:
@dr.ketan
I am not yet rooted on this new LA4, so does it mean to flash the radio alone, I should root, which apparently would mean I will have to downgrade to stock KL3, root, reflash stock LA4 using mobile odin. I was hesitating to downgrade to stock KL3 because I guess its a WIPE version and I don't want to loose my few important settings. So, is there a way to flash the suggested RADIO without rooting my existing LA4?
Click to expand...
Click to collapse
If you are not rooted then also u can do it. You can extract 1level deep that indial kl3 rom n you will get modem file. Then flash only modem with pc odin.
Another better thing is just get downgrade to kl3, it is non wipe, so will get chance to root your device too. Then after root, you can update to la4 with mobile odin pro, here you hve to just keep modem part blanl, n everroot enabled. So your pda only get updated, not modem. Then u can get cf root kernel la4 too.
Sent from my GT-N7000 using xda premium

dr.ketan said:
If you are not rooted then also u can do it. You can extract 1level deep that indial kl3 rom n you will get modem file. Then flash only modem with pc odin.
Another better thing is just get downgrade to kl3, it is non wipe, so will get chance to root your device too. Then after root, you can update to la4 with mobile odin pro, here you hve to just keep modem part blanl, n everroot enabled. So your pda only get updated, not modem. Then u can get cf root kernel la4 too.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Wow. Thanks for the prompt response!! (its almost 3am IST- when do u sleep, if u are still awake at this hour my friend !!!))
I am glad to know that KL3 is non-wipe, so I will now prefer to downgrade, root and reflash using mobile odin.
Regarding flashing the appropriate radio (so that the call silent issue is taken care of), can u please advice with any link to download the correct radio.

Ravindra9 said:
Wow. Thanks for the prompt response!! (its almost 3am IST- when do u sleep, if u are still awake at this hour my friend !!!))
I am glad to know that KL3 is non-wipe, so I will now prefer to downgrade, root and reflash using mobile odin.
Regarding flashing the appropriate radio (so that the call silent issue is taken care of), can u please advice with any link to download the correct radio.
Click to expand...
Click to collapse
Yes this is my routine time to go to sleep, 2.30 to 3am. I need just 5.30 hr sleep n on sunday big 10 hrs.
No u need not to download separate modem. Just keep that kl3.
When u update kl3 to la4 or any, just keep modem field blank in mobile odin, that prevents your modem to update la4. But pda will get updated, thats it.
N yes gudnite
Sent from my GT-N7000 using xda premium

dr.ketan said:
Yes this is my routine time to go to sleep, 2.30 to 3am. I need just 5.30 hr sleep n on sunday big 10 hrs.
No u need not to download separate modem. Just keep that kl3.
When u update kl3 to la4 or any, just keep modem field blank in mobile odin, that prevents your modem to update la4. But pda will get updated, thats it.
N yes gudnite
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks yet again.
I get your point. Shall follow the same.
Sincerely, you are tremendously helpful. I appreciate you immensely.
Lets catch up sometime. I will be glad to treat you for a lunch at the pride, or a place of your choice

suphian said:
Thankz.
Will update here upon my finding.
Appreciate your guidance
Cheers.....
Click to expand...
Click to collapse
Tried and maked my Baseband Version to be emptied when I put the entire file on Mobile Odin in Modem.
Than flash again by just extracting the Modem file only and it works but my 3G is disabled and no internet connectivity.

Check wat is there under about phone
It is like thiss :
Baseband : that show modem you have flashed
You need to enter APN to get connect to 3G

Ravindra9 said:
Thanks yet again.
I get your point. Shall follow the same.
Sincerely, you are tremendously helpful. I appreciate you immensely.
Lets catch up sometime. I will be glad to treat you for a lunch at the pride, or a place of your choice
Click to expand...
Click to collapse
Let input the outcome, does it solved your problem?
Yes.. will come to Baroda (or ahmedabad?)soon ha ha ha

dr.ketan said:
Check wat is there under about phone
It is like thiss :
Baseband : that show modem you have flashed
You need to enter APN to get connect to 3G
Click to expand...
Click to collapse
No wonder.
Didnt look into APN setting though.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 10:29 PM ---------- Previous post was at 10:28 PM ----------
---------- Post added at 10:32 PM ---------- Previous post was at 10:29 PM ----------
This is a snapsot of my current ROM and list.
My country latest Stock is;
N7000DXLA1 --2.3.6 2012 January
N7000OLBKL2 -- Singapore (Singtel)
If i use Mobil Odin and extract the Modem only and flash it, where would the changes be reflected on both snapshot?

[Q] CSC keeps reverting to KOR

Any one has a suggestion as to why my phone keeps reverting to KOR csc?
I have tried flashing with both m-odin and PC Odin different csc's.
No matter what I do it ends up that Kies say firmware upgrade not supported.
PDA:LC1 / PHONE:LB2 / CSC:LB3 (KOR)

if you have flashed a multi csc file then you need to change the csc manually, flashing doesnt normally change it, the kor code is what mine defaults to

Richy99 said:
if you have flashed a multi csc file then you need to change the csc manually, flashing doesnt normally change it, the kor code is what mine defaults to
Click to expand...
Click to collapse
OK how do I do that then
But I think the issue I'm having is because I flashed the LPF bootloader. I have reverted back to STOCK LC1. I have search for ages but dont seem to be able to find a GB rom with old bootloaders. (this be completely wrong)

download csc changer fromthe mrkt, it sys it is for the galaxy s and s2 but works on the note, or google the code for changing it

here is how you manually change it
*#272*your IMEI number # then choose the one you want then tap install CAUTION IT WILL DO A FACTORY RESET
Sent from my Galaxy Nexus

WOLF26915 said:
here is how you manually change it
*#272*your IMEI number # then choose the one you want then tap install CAUTION IT WILL DO A FACTORY RESET
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Brilliant worked like a charm. didn't need my IMEI thou.

RochiWizz said:
Any one has a suggestion as to why my phone keeps reverting to KOR csc?
I have tried flashing with both m-odin and PC Odin different csc's.
No matter what I do it ends up that Kies say firmware upgrade not supported.
PDA:LC1 / PHONE:LB2 / CSC:LB3 (KOR)
Click to expand...
Click to collapse
do you mind sharing the csc? it would be nice if it's from ics rom and multo csc
Thanks.

hgberry said:
do you mind sharing the csc? it would be nice if it's from ics rom and multo csc
Thanks.
Click to expand...
Click to collapse
just the stoct rom for nordics from the stock rom thread.

[Q] Flashing stock firmware with open CSC

Hello,
I just wanted to ask one thing about flashing the Samsung Galaxy Note stock firmware. I'm currently completely stock, never rooted, never flashed, the firmware is the Android 2.3.6 LA6, on the TOP CSC (Serbia, Telenor). Since I really want to finally switch to ICS, I've been planning to switch my CSC to CPW and get the OTA update for 4.0.3 XXLQ2.
Could someone tell me how to get the same LA6 firmware on my phone, but with all CSC's available, so I could switch back to TOP after updating? I wouldn't want any problems like the yellow triangle, not being able to have my phone recognized by Kies and such etc.
Any way to do it, or am I asking too much?

Don't be desperate, Wait for official ICS...
Or follow dr. Ketan's guide....

The thing is, ICS won't appear for my CSC in forever, so I just wanted to switch my CSC to something else and flash 4.0.3, then change the CSC back to my old one. I don't see any guide to do that in Dr. Ketan's, but there's only a list of all European firmwares. I don't know which CSC options they have

lukasspro777 said:
The thing is, ICS won't appear for my CSC in forever, so I just wanted to switch my CSC to something else and flash 4.0.3, then change the CSC back to my old one. I don't see any guide to do that in Dr. Ketan's, but there's only a list of all European firmwares. I don't know which CSC options they have
Click to expand...
Click to collapse
Press *#1234# on dialer and post your screen shot along with about phone in settings. More information will be good.

Here are the screenshots. Also, in Ketan's guide there is a bunch of STOCK firmwares. Is there a way to see which CSC options they have before downloading, or something?

I saw Open Europe firmware with the N7000OXALC1 CSC, any way to check which CSC's are in there?