Database Develop

[ROM][TAR] L720 Stock OD2 Odin flashable

Do NOT rename the tar file, it may cause Odin to fail the md5 check.
This is NOT ROOTED. Its the original TAR file for people who need an Emergency Recovery for their phones, and don't want to wait hours for it to download from slow file hosts.
Download Link: L720 L720T
BACK UP ALL YOUR DOCUMENTS AND PICTURES/VIDEOS ON YOUR INTERNAL SD CARD. THIS MAY ERASE EVERYTHING.
Instructions:
1. Download and Extract tar above and download Odin
2. Put phone into download mode (power off, then power button + Volume Down, then volume up when prompted)
3. Open Odin (right click > open as administrator)
4. Load stock tar into the PDA slot
5. Start flashing
6. Grab some popcorn because it will take a while
7. Profit

Includes bootloader as well?

Finally, thank you. I've held off on trying some things because we didn't have a tar to fall back on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mattzeller said:
Includes bootloader as well?
Click to expand...
Click to collapse
My phone's screen has smashed, so I cannot verify, but I'm sure it does have a new bootloader. I flashed this on my phone successfully (I can hear the Samsung Boot Sound), but cannot verify anymore than that.

If i flash this rom i will lock my phone? Im on another od2 and unlocked with galaxy tools

I am from Greece and i have flashed this rom, my phone was unlocked from the oldest method and it is now still unlocked.
The thing i want to ask is that at the network settings there is nonly the option GSM/UMST for my country and i want to get the options for Only GSM and not to get the 3G Signal at all.
With the old rom there was a prosedure that i was rooting the phone and setting it but is there any root on this one and tell me someone how to get the GSM only setting?

I hope our hero's havent abandoned the S4. I would love this as a rom only, de-knoxed, with hotspot hack. I have the firmware and modem files already.
edit: actually i dont really care about knox anymore, just the hotspot.

Dougrun said:
I hope our hero's havent abandoned the S4. I would love this as a rom only, de-knoxed, with hotspot hack. I have the firmware and modem files already.
edit: actually i dont really care about knox anymore, just the hotspot.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3108732
---------- Post added at 06:19 PM ---------- Previous post was at 06:18 PM ----------
Dougrun said:
I hope our hero's havent abandoned the S4. I would love this as a rom only, de-knoxed, with hotspot hack. I have the firmware and modem files already.
edit: actually i dont really care about knox anymore, just the hotspot.
Click to expand...
Click to collapse
And check here for mods
http://forum.xda-developers.com/showthread.php?t=3108955

Has the modem firmware been extracted?

maurogg84 said:
Has the modem firmware been extracted?
Click to expand...
Click to collapse
Yes, it's in the Rooted stock thread in General forum, by muniz_ri. Modem is in post #2.

I am hoping this is the right one to get my s4 to completly stock. downloading now.

sedrostyle said:
I am hoping this is the right one to get my s4 to completly stock. downloading now.
Click to expand...
Click to collapse
Yes, but this is for the L720, the L720T one is here-https://mega.nz/#F!0JdRkIZR!AqqKdbvba_Hpg5VrCmrbPw

bilgerryan said:
Yes, but this is for the L720, the L720T one is here-https://mega.nz/#F!0JdRkIZR!AqqKdbvba_Hpg5VrCmrbPw
Click to expand...
Click to collapse
I'm a little confused. I have a Sprint Galaxy S4 SPH-L720.
I want to restore it completely to stock. Should I flash the tar linked in the first post, or use one of the tars linked in your quoted post?
Thanks for any info.

copota said:
I'm a little confused. I have a Sprint Galaxy S4 SPH-L720.
I want to restore it completely to stock. Should I flash the tar linked in the first post, or use one of the tars linked in your quoted post?
Thanks for any info.
Click to expand...
Click to collapse
All the info is right there. My post says that link is for the L720T, you don't have the L720T, so you would use the one in the OP.

bilgerryan said:
All the info is right there. My post says that link is for the L720T, you don't have the L720T, so you would use the one in the OP.
Click to expand...
Click to collapse
Thanks for the quick response. I just wanted to be sure I was flashing the right TAR. Didn't want to brick my phone.
I downloaded and flashed the TAR from the first post, and all went perfect. I'm now on Lollipop 5.0.1.
Thanks to OP for this TAR!!!!

I need help... I started flashing the tar in odin to my phone and everything seemed to be doing fine for about 10-15 minutes, then it says "FAIL". Heres what showed up in the message box:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUGOD2_L720SPTGOD2_L720VPUGOD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Read ..
<ID:0/003> XmitData Fail..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
---------- Post added at 11:30 AM ---------- Previous post was at 10:54 AM ----------
nelsona96 said:
I need help... I started flashing the tar in odin to my phone and everything seemed to be doing fine for about 10-15 minutes, then it says "FAIL". Heres what showed up in the message box:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUGOD2_L720SPTGOD2_L720VPUGOD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Read ..
<ID:0/003> XmitData Fail..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Nevermind! I used a different usb cable and it worked no problem haha

nevermind

Update from MF9 4.2.2?
Noob question: I've been away from customizing for awhile. My phone is rooted, but otherwise stock. on 4.2.2 modem MF9. Would flashing this work for updating me to lastest "stock". Or do I need to update modem or something else prior to rom?

vivafutbol said:
Noob question: I've been away from customizing for awhile. My phone is rooted, but otherwise stock. on 4.2.2 modem MF9. Would flashing this work for updating me to lastest "stock". Or do I need to update modem or something else prior to rom?
Click to expand...
Click to collapse
Yes, this should be all you need.

Its failing for me, and on phone download screen in red text it says secure check fail: aboot
---------- Post added at 08:09 AM ---------- Previous post was at 07:59 AM ----------
bilgerryan said:
Yes, this should be all you need.
Click to expand...
Click to collapse
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720TVPUCOD2_L720TSPTCOD2_L720TVPUCOD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

[Q][HELP]Stuck In Emergency Download Mode Screen

I'm stuck decided to try the latest UK Version of Tizen OS loaded it in Odin 3.09 into the AP Slot pressed start and the damn Odin decided to pop up with a error and close out in Windows, now if I try anything still download mode and reopened Odin 3.07 or 3.09, but it never fully installs I'm in the emergency download kies recovery screen.
Is it possible to install a Odin'ed firmware from here, from what I've learned of the screen/area of recovery, it's the same thing as download mode. I tried the latest Tizen OS again and all it did was sit forever at zImage area of flashing.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> V700XXUCOA2_V700OXACOA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
Or I get this:
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> V700XXUCOA2_V700OXACOA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/016> Removed!!
<ID:0/016> Added!!
<ID:0/016> Removed!!
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/016> Removed!!
<ID:0/016> Added!!
<ID:0/016> Removed!!
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> sboot.bin
<ID:0/016> NAND Write Start!!
<ID:0/016> zImage
It just sits there at BOOTLOADER, have to go about getting this far by disconnecting the watch and holding in the power button till it reboots and turns back on to the same screen. Then plug it back up again and press start again in Odin.
I tried on two PC's and this as far as it gets or what all it does.
What can I do to fix this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Don't care if I have to flash JB or TZ, just as long as it's back up and running.

Fixed it had to flash Android MK7 first, now to trying Odin'ing Tizen again

Anddddd zImage gets stuck again... Grrrr

Hi!
I have the same problem... I comes from Null 23 and I want install Tizen
You find the solution for this problem?

Try to flash the tizen NE9 first

Lost galleries, used Dr.Fone for Android and ended up with Odin3

Hi Experts,
Today I lost main DCIM gallery on my Samsung Note 5. I tried to use Dr.Fone application in standard and avanced mode. At the end of the day I didn't manage to retrieve any data. The worst thing is I cannot startup my phone due to "Recovery is not Seandroid Enforcing" error.
I downloaded Singtel Firmware but in Odin3 I get error as follows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Could you please let me know what do I do wrong? By any chance can I recover my phone settings without flashing any data? I still have a hope I will be able to retrieve lost pictures from my gallery.
Thanks and Regards,
KM

What I would like to add below is the message on my Samsung Note 5 after Odin3 failed:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-N920I
CURRENT BINARY: Custom
SYSTEM STATUS: Official
FRP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 1 (0x0500)
RP SWREV: B:2 K:0 S:0
SW REV. CHECK FAIIL. DEVICE: 2, BINARY: 1
How can I proceed with this case?

So will trip Knox on my Sammy devices ?

Odin Fail while flashing stock

Guys,
I have a N920I - XSP Variant which i converted to N920G because of Nougat update and also i rooted this phone but for some reason i want to go back to stock firmware. I am trying to flash the stock N920I updated firmware which i downloaded from [link below]. But I am getting an Odin Fail error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can flash custom ROM from TWRP but I want to go back to Stock. Please guys help me. I also tried to flash N920G firmware but same error.
Firmware link : https://updato.com/firmware-archive-select-model?record=DEDE4285169411E89F15FA163EE8F90B
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

chmosama said:
Guys,
I have a N920I - XSP Variant which i converted to N920G because of Nougat update and also i rooted this phone but for some reason i want to go back to stock firmware. I am trying to flash the stock N920I updated firmware which i downloaded from [link below]. But I am getting an Odin Fail error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can flash custom ROM from TWRP but I want to go back to Stock. Please guys help me. I also tried to flash N920G firmware but same error.
Firmware link : https://updato.com/firmware-archive-select-model?record=DEDE4285169411E89F15FA163EE8F90B
Click to expand...
Click to collapse
Now I am facing another problem guys. I've got no network. I don't why looks like IMEI is broke or something.

this happened to me as well, download the latest rom by date and flash again with odin.
No Errors Anymore
---------- Post added at 01:30 AM ---------- Previous post was at 01:28 AM ----------
you can download you N920l modem from here to restore imei https://shell.boxwares.com/Download.aspx?L=7259

waleedtaqi7 said:
this happened to me as well, download the latest rom by date and flash again with odin.
No Errors Anymore
---------- Post added at 01:30 AM ---------- Previous post was at 01:28 AM ----------
you can download you N920l modem from here to restore imei https://shell.boxwares.com/Download.aspx?L=7259
Click to expand...
Click to collapse
thank you for the great input brother. I've tried to flash N920G rom and everything goes smoothly and tried to flash N920I rom with the provided modem link now SIM is working perfectly. Thank you bro.

chmosama said:
thank you for the great input brother. I've tried to flash N920G rom and everything goes smoothly and tried to flash N920I rom with the provided modem link now SIM is working perfectly. Thank you bro.
Click to expand...
Click to collapse
You are very welcome dear brother.

HELP! Flashing android FAIL SW REV. CHECK FAIL

Hello!
I have problem, i want to flash Android 7.0 with odin on my Sasmung Galaxy S7 (SM-G930F), but i get FAIL everytime, i tryed many ways but always FAIL. I used BL, AP, CP and CSC file.
On my phone when it is in download mode (after flashing) it is written SV REV. CHECK FAIL (BOOTLOADER) DEVICE: 3, BINARY: 2, or other device or binary error.
I cant even use emergency recovery smartswitch, because it seems that my phone is not supported.
Please, i need help there.
I get this log in odin:
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 24 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 4466 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

alescresnar24 said:
Hello!
I have problem, i want to flash Android 7.0 with odin on my Sasmung Galaxy S7 (SM-G930F),.........
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within one of the following threads that's specific to your device and variants.
https://forum.xda-developers.com/showthread.php?t=3702963
https://forum.xda-developers.com/showthread.php?t=3341138
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900T device.