[ROM][TAR] L720 Stock OD2 Odin flashable - Sprint Samsung Galaxy S 4 Android Development

Do NOT rename the tar file, it may cause Odin to fail the md5 check.
This is NOT ROOTED. Its the original TAR file for people who need an Emergency Recovery for their phones, and don't want to wait hours for it to download from slow file hosts.
Download Link: L720 L720T
BACK UP ALL YOUR DOCUMENTS AND PICTURES/VIDEOS ON YOUR INTERNAL SD CARD. THIS MAY ERASE EVERYTHING.
Instructions:
1. Download and Extract tar above and download Odin
2. Put phone into download mode (power off, then power button + Volume Down, then volume up when prompted)
3. Open Odin (right click > open as administrator)
4. Load stock tar into the PDA slot
5. Start flashing
6. Grab some popcorn because it will take a while
7. Profit

Includes bootloader as well?

Finally, thank you. I've held off on trying some things because we didn't have a tar to fall back on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mattzeller said:
Includes bootloader as well?
Click to expand...
Click to collapse
My phone's screen has smashed, so I cannot verify, but I'm sure it does have a new bootloader. I flashed this on my phone successfully (I can hear the Samsung Boot Sound), but cannot verify anymore than that.

If i flash this rom i will lock my phone? Im on another od2 and unlocked with galaxy tools

I am from Greece and i have flashed this rom, my phone was unlocked from the oldest method and it is now still unlocked.
The thing i want to ask is that at the network settings there is nonly the option GSM/UMST for my country and i want to get the options for Only GSM and not to get the 3G Signal at all.
With the old rom there was a prosedure that i was rooting the phone and setting it but is there any root on this one and tell me someone how to get the GSM only setting?

I hope our hero's havent abandoned the S4. I would love this as a rom only, de-knoxed, with hotspot hack. I have the firmware and modem files already.
edit: actually i dont really care about knox anymore, just the hotspot.

Dougrun said:
I hope our hero's havent abandoned the S4. I would love this as a rom only, de-knoxed, with hotspot hack. I have the firmware and modem files already.
edit: actually i dont really care about knox anymore, just the hotspot.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3108732
---------- Post added at 06:19 PM ---------- Previous post was at 06:18 PM ----------
Dougrun said:
I hope our hero's havent abandoned the S4. I would love this as a rom only, de-knoxed, with hotspot hack. I have the firmware and modem files already.
edit: actually i dont really care about knox anymore, just the hotspot.
Click to expand...
Click to collapse
And check here for mods
http://forum.xda-developers.com/showthread.php?t=3108955

Has the modem firmware been extracted?

maurogg84 said:
Has the modem firmware been extracted?
Click to expand...
Click to collapse
Yes, it's in the Rooted stock thread in General forum, by muniz_ri. Modem is in post #2.

I am hoping this is the right one to get my s4 to completly stock. downloading now.

sedrostyle said:
I am hoping this is the right one to get my s4 to completly stock. downloading now.
Click to expand...
Click to collapse
Yes, but this is for the L720, the L720T one is here-https://mega.nz/#F!0JdRkIZR!AqqKdbvba_Hpg5VrCmrbPw

bilgerryan said:
Yes, but this is for the L720, the L720T one is here-https://mega.nz/#F!0JdRkIZR!AqqKdbvba_Hpg5VrCmrbPw
Click to expand...
Click to collapse
I'm a little confused. I have a Sprint Galaxy S4 SPH-L720.
I want to restore it completely to stock. Should I flash the tar linked in the first post, or use one of the tars linked in your quoted post?
Thanks for any info.

copota said:
I'm a little confused. I have a Sprint Galaxy S4 SPH-L720.
I want to restore it completely to stock. Should I flash the tar linked in the first post, or use one of the tars linked in your quoted post?
Thanks for any info.
Click to expand...
Click to collapse
All the info is right there. My post says that link is for the L720T, you don't have the L720T, so you would use the one in the OP.

bilgerryan said:
All the info is right there. My post says that link is for the L720T, you don't have the L720T, so you would use the one in the OP.
Click to expand...
Click to collapse
Thanks for the quick response. I just wanted to be sure I was flashing the right TAR. Didn't want to brick my phone.
I downloaded and flashed the TAR from the first post, and all went perfect. I'm now on Lollipop 5.0.1.
Thanks to OP for this TAR!!!!

I need help... I started flashing the tar in odin to my phone and everything seemed to be doing fine for about 10-15 minutes, then it says "FAIL". Heres what showed up in the message box:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUGOD2_L720SPTGOD2_L720VPUGOD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Read ..
<ID:0/003> XmitData Fail..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
---------- Post added at 11:30 AM ---------- Previous post was at 10:54 AM ----------
nelsona96 said:
I need help... I started flashing the tar in odin to my phone and everything seemed to be doing fine for about 10-15 minutes, then it says "FAIL". Heres what showed up in the message box:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUGOD2_L720SPTGOD2_L720VPUGOD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Read ..
<ID:0/003> XmitData Fail..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Nevermind! I used a different usb cable and it worked no problem haha

nevermind

Update from MF9 4.2.2?
Noob question: I've been away from customizing for awhile. My phone is rooted, but otherwise stock. on 4.2.2 modem MF9. Would flashing this work for updating me to lastest "stock". Or do I need to update modem or something else prior to rom?

vivafutbol said:
Noob question: I've been away from customizing for awhile. My phone is rooted, but otherwise stock. on 4.2.2 modem MF9. Would flashing this work for updating me to lastest "stock". Or do I need to update modem or something else prior to rom?
Click to expand...
Click to collapse
Yes, this should be all you need.

Its failing for me, and on phone download screen in red text it says secure check fail: aboot
---------- Post added at 08:09 AM ---------- Previous post was at 07:59 AM ----------
bilgerryan said:
Yes, this should be all you need.
Click to expand...
Click to collapse
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720TVPUCOD2_L720TSPTCOD2_L720TVPUCOD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Related

Is my NOTE bricked beyond repairs.

I was on asylum omni rom build dated 02.02.2014.
One fine day, my fone just got switched off. When started it was stuck on Galaxy note screen and wont go into recovery mode. Download mode working fine though.
I read a lot of threads in this forum and..
1. Got Odin 3.07
2. Downloaded latest philz kernel
3. tried to flash under PDA tab but stuck at "NAND write fail "
4. Downloaded 16GB pit file for N7000.
5. FLashed PIT file with repartition option ticked. Then it said "Repartition failed"
Is my note bricked beyond repair, Any help... Please!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
jamy862004 said:
I was on asylum omni rom build dated 02.02.2014.
One fine day, my fone just got switched off. When started it was stuck on Galaxy note screen and wont go into recovery mode. Download mode working fine though.
I read a lot of threads in this forum and..
1. Got Odin 3.07
2. Downloaded latest philz kernel
3. tried to flash under PDA tab but stuck at "NAND write fail "
4. Downloaded 16GB pit file for N7000.
5. FLashed PIT file with repartition option ticked. Then it said "Repartition failed"
Is my note bricked beyond repair, Any help... Please!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If download mode is working, I would suggest to try installing a Samsung TouchWiz stock ROM via Odin. But better wait for someone with more knowledge than me or someone that have already faced that issue to reply you
@chasmodo You are on that device since a lot, some idea for that error?
Enviado desde mi Moto G mediante Tapatalk
Try flashing any new version of philz in PC Odin. Then do full wipes and try flashing your custom ROM again from sdcard. Post back.
Sent from Nexus 5 on Slimkat
pc odin wont succeed in flashing philz kernel.. it says nand write fail..l
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.12.8-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fastboot?
Sent from my GT-N7000 using XDA Premium 4 mobile app
jamy862004 said:
pc odin wont succeed in flashing philz kernel.. it says nand write fail..l
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.12.8-n7000.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It seems you have flashed PhilZ revovery instead of his kernel. Find the kernel in the thread in the ori dev. The kernel include recovery with it.
Sent from my GT-N7000 using Tapatalk 2
Yep.
Sent from Nexus 5 on Slimkat
I rectified my mistake as you pointed out... but i get this
If i am still wrong can you please point me out to the thread.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XXLTA-ATL-5.15.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What is the exact version of Odin you are using.
---------- Post added at 08:05 AM ---------- Previous post was at 07:59 AM ----------
I think this one may be older which may work better. Then flash via pda just test. I am not sure it will make a difference. http://www.google.com/url?sa=t&sour...IxHp1ISlP2fzGKhtw&sig2=gsQ88hiD9jIS86zQ-7-PLw
Sent from Omni Nexus 5
---------- Post added at 08:06 AM ---------- Previous post was at 08:05 AM ----------
Obviously don't flash the pit that is in that zip.
Sent from Omni Nexus 5
AndroidSlave said:
What is the exact version of Odin you are using.
---------- Post added at 08:05 AM ---------- Previous post was at 07:59 AM ----------
I think this one may be older which may work better. Then flash via pda just test. I am not sure it will make a difference. http://www.google.com/url?sa=t&sour...IxHp1ISlP2fzGKhtw&sig2=gsQ88hiD9jIS86zQ-7-PLw
Sent from Omni Nexus 5
---------- Post added at 08:06 AM ---------- Previous post was at 08:05 AM ----------
Obviously don't flash the pit that is in that zip.
Sent from Omni Nexus 5
Click to expand...
Click to collapse
ODin i was using was 3.09.
Flashed now using odin3 v1.85. Reinstalled usb drivers and rebooted pc before that.. ensured i did not flash the pit file and pda option was selected. Also changed the USB cable adn trying different usb ports but it seems by only com3 is getting me ahead. rest all does not recognize the phone. Stuck here now.
EDIT1: also..initially my binary counter was zero.. now every time i flash with odin, it is increasing. now it is 4.
Edit 2: I tried different versions of odin. 1.3, 1.85, 3.07, 3.09. gettting stuck at nand write start always..
Edit 3: It actually completed with 3.07 version but still operation failed.
Did you reboot into download mode?
i was in download mode when using odin.
Should i go ahead and flash pit files as mentioned here. http://forum.xda-developers.com/showthread.php?t=1667886&page=116
Whenever I had to use Odin, I did use the 1.87 version.
Make sure that ..
+ no antivirus is running etc
+ KIES is not running (kill all KIES processes via task manager)
The counter is a secondary problem> Triangle Away > after you revived your Note
Good luck?
Sent via GALAXY NOTE N7000 // KitKat
i have disabled AV and FW. I uninstalled kies but kept the usb driver for mobiles. Tried Odin 1.87 again and getting stuck at nand write start.
I flashed all custom pit files as mentioned here http://forum.xda-developers.com/showthread.php?t=1661590&page=2 for case 2. but all failed. It said "Repartition failed"
I dont understand this step in manual partition.
"- Prepare adb folder: download adb folder from Here and extract adb folder to c: driver of your computer, you will have the tools folder which has adb.exe in it. You should now have adb working for your Note.
- Install custom recovery so that you can get into recovery and connect adb. "
Does this mean my fone is superbricked? What has caused this.. i was on stable omni rom which many are using.. i always stayed on stock kernels coming with the rom.
Boot partition could be corrupted for some unknown reason. Take the battery out for a while and see if you can find an Odin flashable stock ICS or JB kernel. (Dr Ketan ?) If flash is successful (it won't raise flash counter), you can boot into stock recovery and flash a Philz kernel and wipe everything, then flash a new rom. If not, your phone is as good as hardbricked. Worse actually, because download mode is still accessible and raised flash counter is there for all to see
Sent from my C6603 using xda app-developers app
i am already out of warranty.. How does the counter matter? [My counter is on 8 now. Can i reset the counter now?]
I am trying to search stock JB kernel in the forum. Search option yielding nothing. Will keep searching..
What would cause such an hardbrick?
Ok so counter is not an.issue then.
Phones just die for no reason sometimes
Edit: See if.you can flash a modified pit from @hg42 http://forum.xda-developers.com/showthread.php?t=1667886
Sent from my C6603 using xda app-developers app
there are 352 patched pits in this for N7000 16GB. Which one do i exactly flash?
Can anyone please point me to an Odin flashable stock ICS or JB kernel. (Dr Ketan ?) ?
Thank you all for your patience
Try thishttp://d-h.st/IvQ
Flash in PDA box
If it works, see if.you can boot into stock recovery (but don't do any wipes)
Sent from my C6603 using xda app-developers app
shoey63 said:
Try thishttp://d-h.st/IvQ
Flash in PDA box
If it works, see if.you can boot into stock recovery (but don't do any wipes)
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
Stuck at NAND write start!
Will any pit file from hg42's http://forum.xda-developers.com/show....php?t=1667886 post work?

Bricked Phone after trying to downgrade to 4.4.2 using odin

upgraded to 5.0 but then decide to see if I could downgrade and I bricked my phone trying to use Odin with the 4.4.2 files. Any suggestions or anyone going thru something similar?
Is it a hard brick? Can you get in recovery or download? What were your steps? With the Note 3 L update, we are able to go back to 4.4.2 and 4.4.4 via ODIN. What did you download. This info will be a big help to see if we can go back to KK from L.
Atomic Virus said:
upgraded to 5.0 but then decide to see if I could downgrade and I bricked my phone trying to use Odin with the 4.4.2 files. Any suggestions or anyone going thru something similar?
Click to expand...
Click to collapse
Try flashing this file in Odin, it does not contain the bootloader so it should flash successfully: G900A_Downgrade_to_NCE
I can get to download menu but after I run Odin 3.09 and use the recovery files AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar SYS REV.
I get the following error:
Check Fail Refer 2 > Binary 1
Secure Check Fail: system
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
muniz_ri said:
Try flashing this file in Odin, it does not contain the bootloader so it should flash successfully: G900A_Downgrade_to_NCE
Click to expand...
Click to collapse
Let me try it. Will report back.
Atomic Virus said:
Let me try it. Will report back.
Click to expand...
Click to collapse
Still getting same error.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900A_Downgrade_to_NCE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> persist.img.ext4
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Atomic Virus said:
Still getting same error.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900A_Downgrade_to_NCE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> persist.img.ext4
<ID:0/006> system.img.ext4
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Very sorry to hear that. A BestBuy Samsung Experience or AT&T shop can likely get you back up and running.
muniz_ri said:
Very sorry to hear that. A BestBuy Samsung Experience or AT&T shop can likely get you back up and running.
Click to expand...
Click to collapse
No worries. Might wait it out for a bit maybe someone will come across a similar situation.
muniz_ri said:
Very sorry to hear that. A BestBuy Samsung Experience or AT&T shop can likely get you back up and running.
Click to expand...
Click to collapse
Great news I am back up and running. I went ahead flash the G900A_OC4_Stock_Partitions using Odin's PDA slot (AP in Odin v3.09+) from your other thread.
Atomic Virus said:
Great news I am back up and running. I went ahead flash the G900A_OC4_Stock_Partitions using Odin's PDA slot (AP in Odin v3.09+) from your other thread.
Click to expand...
Click to collapse
OK, I see now how you bricked....the kernel for the NCE .tar you first flashed updated successfully causing the brick because your system at that point was 5.0.
muniz_ri said:
OK, I see now how you bricked....the kernel for the NCE .tar you first flashed updated successfully causing the brick because your system at that point was 5.0.
Click to expand...
Click to collapse
That is correct! Thanks for your help.
Atomic Virus said:
That is correct! Thanks for your help.
Click to expand...
Click to collapse
I did the same thing you did what exactly did you do to get it to boot back up?
Fitz110 said:
I did the same thing you did what exactly did you do to get it to boot back up?
Click to expand...
Click to collapse
I went ahead flash the G900A_OC4_Stock_Partitions using Odin's PDA slot (AP in Odin v3.09+). Which you can get off this thread. http://forum.xda-developers.com/att-...-2015-t3021120 Sorry for the late responds.
Atomic Virus said:
I went ahead flash the G900A_OC4_Stock_Partitions using Odin's PDA slot (AP in Odin v3.09+). Which you can get off this thread. http://forum.xda-developers.com/att-...-2015-t3021120 Sorry for the late responds.
Click to expand...
Click to collapse
Okay thanks and the link is dead do you think share the file with some way?
Fitz110 said:
Okay thanks and the link is dead do you think share the file with some way?
Click to expand...
Click to collapse
Here
http://forum.xda-developers.com/showthread.php?t=3076803
OPOfreak said:
Here
http://forum.xda-developers.com/showthread.php?t=3076803
Click to expand...
Click to collapse
Thanks but i think that's a updated version of the file presented in that post I was trying to get the original file
Fitz110 said:
Okay thanks and the link is dead do you think share the file with some way?
Click to expand...
Click to collapse
As a junior member, and it's not just you but quite a few, you really need to read and do some research on your phone before you turn it into a very expensive paperweight.
The link I provided took about 5 seconds in this very forum.
Plus doing your reading and research before asking will save you a ton of flaming. Just some friendly advice from someone that's been there done that.
Atomic Virus said:
Great news I am back up and running. I went ahead flash the G900A_OC4_Stock_Partitions using Odin's PDA slot (AP in Odin v3.09+) from your other thread.
Click to expand...
Click to collapse
so what was the exact process? do you mind making it clear for other users? thanks.
Fitz110 said:
Thanks but i think that's a updated version of the file presented in that post I was trying to get the original file
Click to expand...
Click to collapse
No it isn't that's where you will get the Stock partitions he was talking about
OPOfreak said:
No it isn't that's where you will get the Stock partitions he was talking about
Click to expand...
Click to collapse
Okay thanks , my apologies.

HELP !!!!!!! Unrooting Samsung S6 fail

Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Must use Odin v3.10.6
Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse
wp4jot said:
Must use Odin v3.10.6
Click to expand...
Click to collapse
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks
I don't. Did you flash all 4 files at once?
Neostatic17 said:
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks
Click to expand...
Click to collapse
I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.
vontokkerths said:
I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.
Click to expand...
Click to collapse
I Have the same problem with S6- SMG20T (Dutch) Now trying to un-check the auto reboot otion. Hope it works for me.
didn't worked for me
wp4jot said:
I don't. Did you flash all 4 files at once?
Click to expand...
Click to collapse
What do you mean with that? witch 4 files?
Hope you can help me.
After a factory swipe and installing vodafone wallet on my S6 it says that it doesn't work on a rooted Phone
You have to put each file in the corresponding place, when you download the stock rom after you've extracted the zip you're supposed to have a file called AP, BL, CSC, AND the other which I cannot remember, those are the files you're supposed to flash, if you try to flash just AP like on the screenshot it's not going to work.
Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse
I think you downloaded the wrong firmware for your phone, your phone is G920F and the firmware you are trying to flash is G925F.
@Neostatic17, it looks like you downloaded the wrong file. The file should be a tar.zip, not tar.md5. Once you download the correct tar.zip, extract the file and you will see 4 files within the one file you downloaded. Then flash all 4 files with odin.
Edit...Ok, I've checked my pc and the file is a tar.zip before you extract it and once it's extracted, there are 4 tar.md5 files. All you have to do is put the AP file in the AP slot, BL file in the BL slot and so on. I leave auto reboot checked, but that is up to you.

Can't Unroot Note 4 5.1.1 using ODin

For the past couple of days I've been unable to unroot my device using Odin, which I have done many of times on the past. I went to Sammobile and got the latest firmware to flash back to stock, but everytime I attempt to do so the process Fails. USB Debugging is enabled so I don't have a clue what the problem could be. I will list some general information as well as the results of the Odin process below:
Baseband Version: N910TUVUD0K2
Odin process result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910T3UVU1DOK2_N910T3TMB1DOK2_N910T3UVU1DOK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Updated: I've stumbled across a thread here on XDA which has a mirror link to Stock TW Firmware/Bootloader/Modem N910TUVU2DOK2, and after flashing this mirror link using Odin... my phone now is unrooted and back to stock. Many thanks to ShrekOpher for posting the mirror link and here is a link to his post: http://forum.xda-developers.com/note-4-tmobile/development/mirror-stock-tw-t3260858
Same issue
I just posted about this same issue a couple of days ago, if you go to my only post ive done so far you can see how we are in the same boat. What were you using before you got to your problem, which custom ROM?
I had this problem on the note edge. What helped me was flashing cwm recovery and wiping everything
Trebor313 said:
For the past couple of days I've been unable to unroot my device using Odin, which I have done many of times on the past. I went to Sammobile and got the latest firmware to flash back to stock, but everytime I attempt to do so the process Fails. USB Debugging is enabled so I don't have a clue what the problem could be. I will list some general information as well as the results of the Odin process below:
Baseband Version: N910TUVUD0K2
Odin process result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910T3UVU1DOK2_N910T3TMB1DOK2_N910T3UVU1DOK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Click to expand...
Click to collapse
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Catfish197621 said:
I just posted about this same issue a couple of days ago, if you go to my only post ive done so far you can see how we are in the same boat. What were you using before you got to your problem, which custom ROM?
Click to expand...
Click to collapse
I'm currently using [DOK2] TEKXodus HYBRID N4 URv7
mdiaz33685 said:
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Click to expand...
Click to collapse
I check and made sure that the reactivation lock was disabled, but it still didn't work. I guess I will keep an eye open to see if this issue can get resolved sometime in the near future
mdiaz33685 said:
make sure u didn't check in settings the reactivation lock,
use twrp, wipe everything except sdcard... then boot into downloader mode, and it should work, I do know the reactivation lock should be the only thing to stop you.
hope that helps...
Click to expand...
Click to collapse
What are the odin settings for doing this install? I can't get it to recognize the file
Nevermind, quick google showed i should extract the file which im not used to doing for roms and use "AP"
waywardfrantz said:
What are the odin settings for doing this install? I can't get it to recognize the file
Nevermind, quick google showed i should extract the file which im not used to doing for roms and use "AP"
Click to expand...
Click to collapse
U have to unziip the firmware and in Odin u need to goto AP and point to the firmware... sometimes i have to remove the extention .md5 after u unzip the firmware depending on which Odin u use...
make sure u have the samsung drivers installed..
mdiaz33685 said:
U have to unziip the firmware and in Odin u need to goto AP and point to the firmware... sometimes i have to remove the extention .md5 after u unzip the firmware depending on which Odin u use...
make sure u have the samsung drivers installed..
Click to expand...
Click to collapse
I can't Odin to stock unless I change the name of the firmware file to .tar. it skips the md5 check I believe.
---------- Post added at 06:17 PM ---------- Previous post was at 06:14 PM ----------
Also go to supersu and do a full unroot before. I'm thinking maybe the supersu backup script could cause issues too

Odin Fail while flashing stock

Guys,
I have a N920I - XSP Variant which i converted to N920G because of Nougat update and also i rooted this phone but for some reason i want to go back to stock firmware. I am trying to flash the stock N920I updated firmware which i downloaded from [link below]. But I am getting an Odin Fail error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can flash custom ROM from TWRP but I want to go back to Stock. Please guys help me. I also tried to flash N920G firmware but same error.
Firmware link : https://updato.com/firmware-archive-select-model?record=DEDE4285169411E89F15FA163EE8F90B
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
chmosama said:
Guys,
I have a N920I - XSP Variant which i converted to N920G because of Nougat update and also i rooted this phone but for some reason i want to go back to stock firmware. I am trying to flash the stock N920I updated firmware which i downloaded from [link below]. But I am getting an Odin Fail error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can flash custom ROM from TWRP but I want to go back to Stock. Please guys help me. I also tried to flash N920G firmware but same error.
Firmware link : https://updato.com/firmware-archive-select-model?record=DEDE4285169411E89F15FA163EE8F90B
Click to expand...
Click to collapse
Now I am facing another problem guys. I've got no network. I don't why looks like IMEI is broke or something.
this happened to me as well, download the latest rom by date and flash again with odin.
No Errors Anymore
---------- Post added at 01:30 AM ---------- Previous post was at 01:28 AM ----------
you can download you N920l modem from here to restore imei https://shell.boxwares.com/Download.aspx?L=7259
waleedtaqi7 said:
this happened to me as well, download the latest rom by date and flash again with odin.
No Errors Anymore
---------- Post added at 01:30 AM ---------- Previous post was at 01:28 AM ----------
you can download you N920l modem from here to restore imei https://shell.boxwares.com/Download.aspx?L=7259
Click to expand...
Click to collapse
thank you for the great input brother. I've tried to flash N920G rom and everything goes smoothly and tried to flash N920I rom with the provided modem link now SIM is working perfectly. Thank you bro.
chmosama said:
thank you for the great input brother. I've tried to flash N920G rom and everything goes smoothly and tried to flash N920I rom with the provided modem link now SIM is working perfectly. Thank you bro.
Click to expand...
Click to collapse
You are very welcome dear brother.

Categories

Resources