There were discussions and I saw lots of examples of possible solutions.
About 1 month ago, MI 9 turned itself off. I tried to boot it by power button, it started, but after few minutes it turned off again by itself with no possibility to boot it.
Okay, after few hours, I found the Volume up, Volume down and Power buttons to be simultaneously pressed, to boot it, so I tried. It started with message "The system has been destroyed". I pressed Power button once, turned it off, then again, by Power button turned it on. No data lost. All there, it did look okay. Phone booted correctly.
After few days same issue, same solution.
Then again and again, more frequently. Then I saw that I need to use hair dryer to heat it a bit, to be able to boot it.
I saw many discussions, including those here that are saying about MIUI version to be related to the issue. I don't think so.
Some users told that they finally had to send phone to service, they were told later that motherboard was replaced in order to fix the issue. I must say that issue does not look to be very rare. I saw that many MI 9's were affected (based on discussions), and, number of online shops (electronic) were selling THE motherboard for $120+. Clearly, it is visible that there is production, factory problem of one phone part.
In car (and not only car) industry, when there is a factory issue with specific part, all units were brought back to production for the bad part to be replaced, units already sold as well.
I exchanged few e-mails with Xiaomi support. First I got very generic answers. Then answers were more precise, but still not clear that they clearly recognize factory fault.
I do not have Xiaomi service close to me, so I may need to send it by mail, which I would not do (costs may be, politely said, unexpected, as they may put to the paper everything was replaced). I can bring the phone to the seller, where I bought it, to get the same unexpected results, costs up to the phone price or more, as they may put to the pricelist what they want (again not easy to trust someone who does not want to recognize own factory faults).
Clearly, this will for sure, limit my readiness to buy Xiaomi again.
Just to mention, I am having the phone turning itself off every day for more times, which is making it useless. Starting, booting works only after a bit of heating it and pressing it a bit (torque), which tells by itself that phone has some mechanical issue inside.
I would like to ask if anybody has same or similar issue and what may be resolution?
Thanks a lot.
Somehow, it looks that some series of MI 9 has the factory error on itself.
It seems that problem is mechanical, based on some construction issue.
If I am able to somehow, turn the phone on, doing next step is turning the phone off: slightly pressing upper phone part clockwise and at the same time lower phone part counterclockwise, making torque, is turning the phone off.
So, inside the phone there is electronic / construction issue, it may be related to cable, connector.
Contacting Xiaomi, with exact problem explanation is useless, I have to say that I am really disappointed in relation to everything about this phone and Xiaomi now (initially, phone worked amazingly good).
Anyone has the same issue with MI 9,or some other Xiaomi phone?
That definitely happens to me , if I double the chassis would work
Is the screen? Is the motherboard , is the chasis?
Obviously a manufacturing or design defect if multiple users are experiencing this.
May be limited to just one batch or production run, hopefully.
I removed then placed back, rear battery cover. Then, I removed and placed back upper board and battery. Next, I tried to remove and place back upper board, battery and lower board. Finally, I removed and placed back upper board, battery, upper underlying part, lower board, lower underlying part. After every single step I checked, same issue (behaving same way as I described in previous note here) - there is some badly constructed part, having loose connection. I did not try to remove screen yet.
Yes, it really is factory, production problem.
At other side, every manufacturer may make an issue in production. And there is a difference between good and bad companies.
Xiaomi can make great phones with Terapixels ( may be in near future!) of cameras and Terabytes (not so near future!) of RAM, still, if they do not recognize and have proper, correct answer to their own manufacturing errors, they are just bad.
I exchanged few e-mails with Xiaomi itself. What I got was generic, almost robotic answers. Spending time when preparing e-mails I am explaining the issue to them was total waste of time. Somehow, seems that they know about the problem but they do not want to recognize that.
And, more. Spending money to Xiaomi MI9 is waste of money. Again, phone has some really great capabilities and if it is working well, it seems to be good. When it is not working good, it's disaster. And, as it is clear, it is not rare. Many users of the phone are having this issue.
Minimum what may be expected from Xiaomi is to announce publicly that there is the problem on those and those Xiaomi Mi 9 phones, with Serial numbers starting at this or that and those phones will be replaced immediately with no questions at all.
Asking for too much?!
Maybe it can be the ic chip or the cpu , which need a reballing
Does not matter what you write to Xiaomi, generic, robotic answer is their response.
Hello, Greetings from Xiaomi Customer Support! This is GenericName.
We at Xiaomi values your trust and we apologize for the inconvenience. Rest assured that we'll assist you on this.
This is not what we expect for our customers to face it. We at Xiaomi always work hard and strive to provide our customers with the best quality products, and nothing is more rewarding than to hear from a happy customer. It's unusual to receive such an incident from our customers with all the care and attention that we give to everyone. However, I would request you to coordinate with the respective point of purchase for better and quicker support.
If you have any other questions, welcome to visit again. Always believe that something wonderful is about to happen!
Follow [email protected] to get latest product tips and service information. https://twitter.com/XiaomiSupport
Best Regards
GenericName
Got few of those; this reply came today.
Related
After the replacing of my X1's housing with the new one in the SE Service center I went home gladly with my new X1 housing. I noticed there's an error in signal in my X1 when I was checking my phone at the SE center.. But I thought it was maybe due to poor reception thus I neglected it. (the officer in the SESC say so)
Now I know that there's some new problem arise.. Any idea what might cause this error? the phone can read the Sim card but there is no signal (no connection, no call or no data can be made). i try to check the antenna module, but it seem to be OK (i did not see any problem on it).
the next day i came to the SE center, they said it might be something wrong with the software (since i am used using cooked rom) how come it can make any different while i'm using it before i replace the housing. and they have to take it into the HQ. and guess what, it may take another 6-7 week... WTF
is there anyone having the same problem with me?
Well if you have the tools, you can try openingu p the bottom cover, that little rubber thing where it has the mini sony ericsson logo. Open that rubber up, and you should see a mini screw in the middle, open that up take it out, maybe just give it a quick clean, fit it back properly, and make sure everything is tight and see how that works out.
I've seen/heard a few people having such issue when taking the housing off, and not placing that radio/reception thingy back properly, therefore causing issues with reception.
briian_ said:
Well if you have the tools, you can try openingu p the bottom cover, that little rubber thing where it has the mini sony ericsson logo. Open that rubber up, and you should see a mini screw in the middle, open that up take it out, maybe just give it a quick clean, fit it back properly, and make sure everything is tight and see how that works out.
I've seen/heard a few people having such issue when taking the housing off, and not placing that radio/reception thingy back properly, therefore causing issues with reception.
Click to expand...
Click to collapse
I did it twice, just to make it sure that everything was on their place, also try to flash the ROM, The Radio but still remain the same....
any other suggestion or idea what should I do?
Same problem!
I had disassembled my phone by myself twice; the first time it worked perfectly, the second, unfortunately, it didn't!
I bought a new antenna module for U.S. $10, installed it myself (warranty ended three months ago), walked out of the service centre and voila; I had reception and managed to make a few calls. However, on the way back home, all calls placed while driving dropped every 5km, which means the hand-over between cell towers was failing. The moment I walked home it was dead; no reception whatsoever indoors.
Now the way I see it, this could be due to one of the following two reasons: either the RF power amp failed, which means that most probably the phone needs a new main board (too expensive, not worth it) or something went wrong during the assembly, like the smearing of a sensitive part by skin oil (thus causing a short circuit) or failure to position a connector or multiple ones to connect properly to their respective terminals/connection points.
Upon further investigation, I noticed that my phone wasn't properly grounded; whenever I connected it to a computer to sync using ActivSync or in disk drive mode, I got a small electrical shock (painful though) whenever I touched the phone. This, however, doesn't occur at all when I connect the phone to the wall charger. I disabled USB charging since day 1 of owning my X1i
I believe that the battery cover acts as a ground for the phone electronics; it touches four golden connectors which in turn touch the mini USB port, the GPS/Wi-Fi/Bluetooth antenna, a point on the main board half an inch away from where the loudspeaker is, and the metallic cover placed over the phone RF chips. Failure to ground the phone properly can result in either damaging any of these chips, building up a static charge that affects the antenna performance, or an open-circuit condition for one of the many systems on board.
Since my phone is fully working as a PPC now (PPC functions, Panels, Keyboard, Camera, GPS, Wi-Fi, Bluetooth, etc...) and since I get reception outdoors, and since I have a brand new antenna module, I am guessing that either the RF amplifier is dead, or the housing is ****ed up beyond repair (i.e. it can't be aligned perfectly to get perfect contact on all said points) that it's either shorting a connection, or opening one that is vital for the cellular radio to function properly.
So what to do? Well I forced my phone to do two things:
1. Settings > Phone > Band
- Network type: I chose GSM instead of Auto, as we don't have consumer CDMA in Egypt
- GSM/UMTS Band: I chose the correct band for my provider instead of Auto.
2. Settings > Connections > Advanced Network > Disabled HSDAP
What happened? It worked indoors for a minute, and then stopped working again! Frustrating! So what did I do? I ordered a completely new housing off CNN and will attempt to rebuild the damned thing.
I will update you if I find out anything or reach any results with this phone that I love so much and hate more than anything I have ever hated in my life...
More info!
- During the drive mentioned above, the phone was switching between H, E and G, which means that all three RF chips are, or all components of the whole RF chip if it's one responsible, are working. At one point I got 4 bars of H and call quality was perfect between hand-over failures.
- Before disassembling my phone for the second time, people were complaining about high-pitched static; it can blamed over the mic, the RF (antenna or chip) or humidity levels (which are currently as high as 85%) affecting cellular communication channels.
- Flashing the firmware (R3A Generic UK) and hard-reseting didn't solve the problem.
More Info!
- The battery cover isn't the phone's ground; it's grounded by being connected to four ground points: the mini USB port metallic frame, the GPS/Wi-Fi/Bluetooth antenna ground, a ground point on the main board and the metallic cover over the sensitive RF chips.
- This is definitely an assembly problem. The reception is great outdoors switching between all bands and speeds. On my drive to work today it worked getting G, E, 3G and H all in 4 bars. The signal, however, is completely unstable, jumping from one speed to another. I am more inclinded now to believe that a new housing will fix this problem. Your housing was probably handled poorly at the service centre, which in turn caused this problem.
My advice is to shake them a little bit and see what they will do.
A New Housing didn't fix it!
I purchased a new housing from CNN. It came in good condition. The phone looks brand new now but still no signal. I am sending it in for service. I guess I blew up my Power Amplifiers...
Good luck mate!
melaskalany said:
I purchased a new housing from CNN. It came in good condition. The phone looks brand new now but still no signal. I am sending it in for service. I guess I blew up my Power Amplifiers...
Good luck mate!
Click to expand...
Click to collapse
Same problem haa...
I still waiting for a good news from the service center... I have been waiting for a month..
I wish You a good luck too...
I'm having the same problem. I opened up my phone a few days ago to clean the keyboard. The bottom row wasn't working correctly. Unfortunately after I closed it up again, it wouldn't get any reception (and the keyboard's bottom row was still not working correctly).
So I figured it was the antenna and tried to reposition it. I even removed the rubber layer as described here: http://blog.whitesites.com/How-to-Increase-Reception-on-Sony-Xperia-X1__633958291637656250_blog.htm
Outside I get ok reception, but it's far from stable, inside I get none. And even if I get reception inside, once I pick up the phone, signal drops. So I thought about grounding as well, problem is I even tried rubber gloves and that doesn't solve the problem. I'm afraid replacing the antenna's won't help here and my xperia is dead. Anyone has any other ideas?
Been there too!
I tried the same solution the blog explained. However, I ended up not getting any signal at all. It's only after I purchased a new cellular antenna+buzzer module that the phone started getting an unstable signal outdoors.
Did you notice any small pieces falling off the main board or the housing? It's either a hardware failure or a simple short/open circuit situation that can be fixed in a blink of an eye!
Question
Is there any possible way, hardware or software, to test whether all chips on the main board function properly? I tried the diagnosis tool available here but it doesn't check the chips one by one.
Service Centre
I took my phone to the service centre 6 hours ago. With the new housing on, and new screws that I scored from a secret source of mine, they deemed the phone untouched and serviceable; i.e. it passed for a phone that hasn't been tampered with!
They told me to call back in four days. I will keep you guys updated. Cheers!
I wonder if that'll fix it So to summarize you have:
- new housing
- new screws
- new vibramotor
- new antenna
And those things twice and that fixed it maybe?
I guess it's time for a new phone for me
Vibramotor?
Who said anything about changing the vibration motor? I installed a new antenna + buzzer module; i.e. a new cellular antenna and a new loud speaker (external speaker). The loud speaker is housed within the antenna module. My bad, maybe that part was vague because I never explained it enough.
And yes, it has a brand new housing too. I only installed the lower part though, as the upper part is just fine. Maybe they will fix it man; maybe they won’t I really don't know. I do hope they will fix it though.
I am currently using a backup cheap Nokia and ordered the Sony Ericsson Aspen. If they ever fix my X1 then I can change seamlessly between both phones. If not, then I will just use my X1 as a media/GPS device in my car and an Internet device over Wi-Fi.
Lucky you..... if they can fix yours in a few day... since mine has been in the service centre more than a month, without any news...
they said to me that it will take about 6 week...
What a joke!
The phone remained at the service centre for a week. They called me yesterday, and told me that the phone was fixed and that the total cost was EGP 100 (~U.S. $18). I went over and as soon as I held the phone in my hand to test it, it lost the cellular signal. When placed on the counter, the phone had a constant E signal.
I asked to speak to the manager, who told me that they just reflashed the phone with the latest firmware (Generic UK R3A, which I already had installed). Oh, and before that, he said he was sorry but the phone had a hardware problem and that they don't fix hardware; they only flash firmwares and if that doesn't fix the phone, then the user is pretty much on his own! I refused to receive the phone, so he gave me a refund for my money and promised to have its hardware checked and get back to me in 24 hours!
What a joke, what an f'ing joke! I already regret ordering the Aspen that is due to arrive next week with a friend of mine returning from Paris...
melaskalany said:
The phone remained at the service centre for a week. They called me yesterday, and told me that the phone was fixed and that the total cost was EGP 100 (~U.S. $18). I went over and as soon as I held the phone in my hand to test it, it lost the cellular signal. When placed on the counter, the phone had a constant E signal.
I asked to speak to the manager, who told me that they just reflashed the phone with the latest firmware (Generic UK R3A, which I already had installed). Oh, and before that, he said he was sorry but the phone had a hardware problem and that they don't fix hardware; they only flash firmwares and if that doesn't fix the phone, then the user is pretty much on his own! I refused to receive the phone, so he gave me a refund for my money and promised to have its hardware checked and get back to me in 24 hours!
What a joke, what an f'ing joke! I already regret ordering the Aspen that is due to arrive next week with a friend of mine returning from Paris...
Click to expand...
Click to collapse
OMG...
I do hope that you will get the good news next...
Bad News!
Deep breath... Ok!
Here is the deal: the service centre officially announced that the fault lies within the Mainboard; i.e. my guess that the Radio Frequency (RF) Power Amplifier Chip is toast was correct. They want to charge 90% of the phone's original retail price (which was EGP 4000 = U.S. $700) for a new Mainboard. I replied that that was impossible. They will contact SE's HQ and get back to me on Saturday to see if they can offer any other alternatives.
I guess that is the end of my ride with the X1. I will sorely miss it; it was a great phone while it lasted. Let's hope that the Aspen won't die on me in a year as well...
I have no idea what's happened but the screen on my Z is completely unviewable. Was in my pocket, got a text took it out and it's dark (backlit making it appear grey) but with lines moving all over the place. Every now and then I get a brief glimpse of my home screen but then it disappears. The phone itself appears to be working but I can't see anything at all on the screen.
I've tried a reset (pressing vol+ and power button) but same issue right from the start (even on boot the sony logo appears as lines all over the place).
I suspect it's a hardware issue and i'll have to take it back but any thoughts before I go down that route?
Phones4U are going to do an exchange for me so problem solved but it does make me nervous about any future problems. Not even a month old yet and it's not like i've been throwing it around.
PHTC said:
Phones4U are going to do an exchange for me so problem solved but it does make me nervous about any future problems. Not even a month old yet and it's not like i've been throwing it around.
Click to expand...
Click to collapse
I do understand. We have to accept though that every devise we purchase there is always going to be some that are faulty. When it happens to us we tend to think its a devise problem that affects the whole range. Some people actually decide not to purchase that brand again meaning from phone to TV etc?
I am an Asus fan yet the hell I had with their range of tablets could have turned me against the brand. It didn't I own some very good Asus products.
These forums tend to be negative places as an awful lot of members only join a forum because they develop a problem. If we read every thread published here it would be impossible to purchase any phone from any brand as every single one of them has some problems.
You must, obviously, return your phone for an exchange. I hope all goes well with your replacement. It should be fine.
I want to give some context.
I have owned my Z1 since release on a contract. I have previously had the screen replaced twice and it worked fine afterwards.
However, I had dropped the phone resulting in the top of the screen cracking. Got it replaced by a local phone repair shop.
The result was a new phone screen, a white edge just over half way down the screen might be worth noting. The repair man said it was a warranty sticker on the screen they put in. (Sounds silly)
Anyway, the resultant problem is not exactly like what i've seen on many threads.
My phone now decides to press itself erratically. Usually after swiping and trying to press delete on the keyboard would it start acting up.
My remedy: Hard reset(Didn't work), factory reset(didn't work), upgrade from 4.4 to 5.1(I think, newest software) and to my surprise the issue remains. So after the repair man replacing the screen twice and ensuring that i'd done my best with little to no phone knowledge, I still have this problem.
There's many threads detailing problems, some linking to apk's that are "calibration software", some that say you can change calibration.ini but no helpful replies or expanding info on the threads.
Can anyone tell me if they've had any luck with this or anyone who has knowledge of what I should do next (E.g "there's no fix guy, you'll have to sell it and move on") as i'm starting to assume these screens are very tedious to deal with
Remove the plastic protector and put a tempered glass protector
My phone decided to not switch on any longer. The only sign of life is the notification led blinking red when is in charge, no way to access it with any program if I attach it to the PC with a USB cable.
I should send it to the Sony repairing center (still under warranty) but the phone is rooted; given its situation do they discover it ?
I had that exact problem. Turned out that the battery suddenly died after about a year.
In my experience they never care what stuff is currently on the phone. Instead they'll just flash it with the latest stock rom after fixing the hardware.
Thanks a lot for sharing your experience. I really hope will be the same in my case as well. I'll post here what will happen.
PS I'm wondering about the batteries' quality: my daughter with a z1c had your same problem (a little more than one year life), you, may be myself... I know the sample is not significant but...
Same thing happened with mine & i was on a custom rom with unlocked bootloader...they probably had no way to get into the phone just like i couldn't so they probably couldn't tell it was modified...it was just a brick at that point...i noticed certain batches were affected by this sudden death and after pulling my tag out i noticed my phone was part of that batch that was poorly assembled in china...so brand new phone for me!
Fictional Reality said:
Same thing happened with mine & i was on a custom rom with unlocked bootloader...they probably had no way to get into the phone just like i couldn't so they probably couldn't tell it was modified...it was just a brick at that point...i noticed certain batches were affected by this sudden death and after pulling my tag out i noticed my phone was part of that batch that was poorly assembled in china...so brand new phone for me!
Click to expand...
Click to collapse
OK, another positive experience. I cross my fingers and I'll post what will happen to me
I have the impression they dont even check the software, they just flash a new fw and thats it. Or they dont care.
My phone locked up on me like this, but I solved it by pushing a pin into the reset button hole.
Geoff2 said:
My phone locked up on me like this, but I solved it by pushing a pin into the reset button hole.
Click to expand...
Click to collapse
Thanks for the suggestion but I tried any possible way to resurrect my phone, including what you're saying, without any result. I hope to confirm soon what all the contributors to this thread are saying...
Just received the device from assistance; everything went well: the motherboard was replaced.
The only drawback is that the lost the tiny grill that cover the mic at the bottom of the phone !!!!!
Hi All.
Battery stuck on 50% won't change even when charge or discharge. Today it randomly shutdown in my pocket. and then had a battery symbol with a ?. The phone eventually turned on, I've tried turning off location, rebooting still having issues. Sometimes the battery saving mode stops working, i.e. it cannot be turned on. As I can see the problem concerns a large group of users and nobody knows what this problem is related to. Google is silent as usual. Is this a problem with the software or components ?! I am in a bad situation because I have no warranty for the device and I do not know where to send the phone in Poland because no one knows what is the cause of the problem. Help me please.
https://support.google.com/pixelphon...25796722?hl=en
https://support.google.com/pixelphon...22385581?hl=en
Had this.
This is going to sound dumb:
Shut your phone off.
Now squeeze the phone around the G logo on the back (like you're trying to compress it).
Now turn it back on and charge normally.
This is potentially only a temporary fix as I have no idea how this would be software related.
If you can enter bootloader mode, you still have chance to save your phone by yourself :
(1)Make sure there is fastboot&ADB tool in your computer
If you don't have it, please download from here(https://developer.android.com/studio/releases/platform-tools). To click the one depends on which one of OS you have and then install in your computer
(2)Download google factory image file from here(https://developers.google.com/android/images). To choose the model of your phone and download it then extract file.
(3)Reboot your phone to bootloader mode. Then use USB cable and make phone connected to your computer USB port. Then execute the window commend mode. key in
fastboot devices ===> make sure your phone being catched by your computer
flash-all ===> To build up a whole new pixel OS in your phone.
Good luck !
Kris
Shayded said:
Had this.
This is going to sound dumb:
Shut your phone off.
Now squeeze the phone around the G logo on the back (like you're trying to compress it).
Now turn it back on and charge normally.
This is potentially only a temporary fix as I have no idea how this would be software related.
Click to expand...
Click to collapse
Unfortunately, this is only temporary. After one day the problem happened again!
SignumOne said:
Unfortunately, this is only temporary. After one day the problem happened again![/QUOTE
Ive had my pixel 4 xl since november and it just started automatically shutting off when in my pocket all by it self a few weeks ago , took cell phone to my sevice provider and they sent it in for repair ...received a new phone ...well refurbished p4 xl only to have if start happening again days later and have the 50% battery start happening also ....contacted google and they are in the process of sending me a new refurbished p4 xl , so this will be my 3 rd p4 xl ..lol
very frustrating to say the least ....ive had to hard reboot my phone at least 20 times a day or basically keep it out of any pockets , the is common issue apparently with pixels phones from what i've read in the link https://support.google.com/pixelphone/thread/22397169?hl=en
I've talked with loyalty department at my service provider and if it happens again with the pixel that google sends me , then they will allow me to void my contract and supply me with a new device from a different brand ...ie Samsung or apple or whatever else is available on the market right now on there website.
i'll be really bummed if i have to switch to a samsung or apple buuuuuut need a stable device ...lol
So to anyone having this issue that still has a basic warranty, there are at least 2 options ...rma device over and over till you get one that doesn't have this problem or contact service provider and explain your situation and most likely they will be understanding to the fact that you have purchased a 1200.00 phone that requires constant rma's and hopefully allow you to exchange for a different brand of phone that doesn't have this these problems
Click to expand...
Click to collapse
Mr. Blanco said:
SignumOne said:
Unfortunately, this is only temporary. After one day the problem happened again![/QUOTE
Ive had my pixel 4 xl since november and it just started automatically shutting off when in my pocket all by it self a few weeks ago , took cell phone to my sevice provider and they sent it in for repair ...received a new phone ...well refurbished p4 xl only to have if start happening again days later and have the 50% battery start happening also ....contacted google and they are in the process of sending me a new refurbished p4 xl , so this will be my 3 rd p4 xl ..lol
very frustrating to say the least ....ive had to hard reboot my phone at least 20 times a day or basically keep it out of any pockets , the is common issue apparently with pixels phones from what i've read in the link https://support.google.com/pixelphone/thread/22397169?hl=en
I've talked with loyalty department at my service provider and if it happens again with the pixel that google sends me , then they will allow me to void my contract and supply me with a new device from a different brand ...ie Samsung or apple or whatever else is available on the market right now on there website.
i'll be really bummed if i have to switch to a samsung or apple buuuuuut need a stable device ...lol
So to anyone having this issue that still has a basic warranty, there are at least 2 options ...rma device over and over till you get one that doesn't have this problem or contact service provider and explain your situation and most likely they will be understanding to the fact that you have purchased a 1200.00 phone that requires constant rma's and hopefully allow you to exchange for a different brand of phone that doesn't have this these problems
Click to expand...
Click to collapse
I fully understand you. I am in a worse position. As a loyal Google fan, I bought my pixel from someone who didn't have a proof of purchase. In Poland it was difficult to get it, and as it was 1.5 times more expensive than everywhere else. It seems that I can throw out the pixel and buy another phone for a lot of money. I am most annoyed by the company's attitude. It looks like they are xxxxx on us.
Click to expand...
Click to collapse
Kris Chen said:
If you can enter bootloader mode, you still have chance to save your phone by yourself :
(1)Make sure there is fastboot&ADB tool in your computer
If you don't have it, please download from here(https://developer.android.com/studio/releases/platform-tools). To click the one depends on which one of OS you have and then install in your computer
(2)Download google factory image file from here(https://developers.google.com/android/images). To choose the model of your phone and download it then extract file.
(3)Reboot your phone to bootloader mode. Then use USB cable and make phone connected to your computer USB port. Then execute the window commend mode. key in
fastboot devices ===> make sure your phone being catched by your computer
flash-all ===> To build up a whole new pixel OS in your phone.
Good luck !
Kris
Click to expand...
Click to collapse
Have you checked if it works for you?
SignumOne said:
Have you checked if it works for you?
Click to expand...
Click to collapse
i've flashed full stock images , custom roms and still have the same issue on both stock and custom rom
Had the same problem three weeks ago. Contacted Google Support und they send me a new phone as a replacement on warranty.
SignumOne said:
Hi All.
Battery stuck on 50% won't change even when charge or discharge. Today it randomly shutdown in my pocket. and then had a battery symbol with a ?. The phone eventually turned on, I've tried turning off location, rebooting still having issues. Sometimes the battery saving mode stops working, i.e. it cannot be turned on. As I can see the problem concerns a large group of users and nobody knows what this problem is related to. Google is silent as usual. Is this a problem with the software or components ?! I am in a bad situation because I have no warranty for the device and I do not know where to send the phone in Poland because no one knows what is the cause of the problem. Help me please.
Click to expand...
Click to collapse
This is the "No Warranty Solution" : Flash a full factory image and allow it to completely wipe your phone. This is the second step Google support would give you (the first is doing a factory data reset from Recovery). If after flashing your phone, restoring it to the original "out of the box" state, you still have a battery issue, then the next step is to replace your battery. If you forgot to state in your OP that your bootloader is still locked (so you can't flash the image) then you need to do that first. Bottom line is you need to factory reset the phone to rule out a software issue. If the restored phone still has the same problem, then you need to focus on the hardware. Best of luck. :good:
Yes, it does !
SignumOne said:
Have you checked if it works for you?
Click to expand...
Click to collapse
Same happened to me with 4 XL 64.
I've been able to "fix" with the turn off and squeeze but the problem has turned into the battery discharge displayed gets stuck at a percentage and it won't charge. I have to turn off & squeeze to get it back.
Finally called Google and they are making me send my phone in for repair. Now I assume for turnaround sake, they'll just send me a new refurb back. That also means I'm not confident the problem will be resolved as there are over 150 replies on the Google Support page identifying this problem.
https://support.google.com/pixelphone/thread/25796722
Looks like some folks are getting a replacement before sending the problem phone back but others are required to send it in or drop off at repair facility.
Good for me? I have Preferred Care and I'll keep sending them back until I get one that works.
Bad for me? I'll have to keep sending them back + I splurged on the orange color so I doubt I'll ever see that again.
I've actually dealt with this. This is a hardware issue. I had the same problem. Covered by warranty, I took it to ubreakitifix after contacting Google and they took care of me. Trust me this isn't a issue where you can flash this or squeeze that. This is a hardware issue on Google's part. There's nothing you can do as a phone user about a defective battery in a 6+ month old $1000 phone
angus242 said:
Same happened to me with 4 XL 64.
I've been able to "fix" with the turn off and squeeze but the problem has turned into the battery discharge displayed gets stuck at a percentage and it won't charge. I have to turn off & squeeze to get it back.
Finally called Google and they are making me send my phone in for repair. Now I assume for turnaround sake, they'll just send me a new refurb back. That also means I'm not confident the problem will be resolved as there are over 150 replies on the Google Support page identifying this problem.
https://support.google.com/pixelphone/thread/25796722
Looks like some folks are getting a replacement before sending the problem phone back but others are required to send it in or drop off at repair facility.
Good for me? I have Preferred Care and I'll keep sending them back until I get one that works.
Bad for me? I'll have to keep sending them back + I splurged on the orange color so I doubt I'll ever see that again.
Click to expand...
Click to collapse
You might be able to convince them to send you a device before you ship it off, citing the current global situation and a need for a cell phone
OP lives in Poland and has no receipts or warranty. Poland is not a supported country so he is looking for "non-warranty" solutions.
Shayded said:
You might be able to convince them to send you a device before you ship it off, citing the current global situation and a need for a cell phone
Click to expand...
Click to collapse
The return process was pretty great. I shipped my existing phone off on a Monday (Illinois to Texas) and by the following Monday, I received my exact phone back (has a screen protector on it). I was very satisfied with that. HOWEVER, the "repair" still has an issue where if I charge to 100%, the icon stays at 100% until I reboot and then it'll display the correct battery %.
The repair documentation was a bit vague and said they replaced the "charging port". I still believe there's a unannounced hardware issue. Can anyone say, class action????
---------- Post added at 04:16 AM ---------- Previous post was at 03:49 AM ----------
I wonder what the next step would be if I started another repair claim?
Holding the power button down for more than 3 consecutive seemed to solve a similar issue for me. My P4 was holding certain percentages for too long (even though the phone actually lost more).
Suavie103 said:
I've actually dealt with this. This is a hardware issue. I had the same problem. Covered by warranty, I took it to ubreakitifix after contacting Google and they took care of me. Trust me this isn't a issue where you can flash this or squeeze that. This is a hardware issue on Google's part. There's nothing you can do as a phone user about a defective battery in a 6+ month old $1000 phone
Click to expand...
Click to collapse
This post seems to have been ignored. If it happens to me, I'll try that. But my carrier purchase didn't qualify for Google extended care add-on. Standard warranty only. Does that make a difference in what Google would do in this case?
I use Accubattery and monitor charge cycles for "battery wear". Even following "Battery College" recommendations, battery health has dropped from 99 to 95%; I've had the P4XL since November. I'm now slowing the charge, getting away from power delivery to see if that helps slow the wear. SOT varies greatly per charge.
I use a belt pouch for carrying phone while away from home. Rarely, I put it in my pocket but do so at home- front pocket only- never back pocket. May just be bad phone batteries from what I've read.
Sent from my Pixel 4 XL using Tapatalk
v12xke said:
OP lives in Poland and has no receipts or warranty. Poland is not a supported country so he is looking for "non-warranty" solutions.
Click to expand...
Click to collapse
For 5 weeks my Pixel has been in the authorized repair center in Germany. They don't have parts to fix it. They told me that. It is not known how long this may take. I haven't had such a circus with a good smartphone. I love Google products, but I feel very disappointed because Pixel cost me a lot of money and this is definitely a factory defect.
SignumOne said:
For 5 weeks my Pixel has been in the authorized repair center in Germany. They don't have parts to fix it. They told me that. It is not known how long this may take. I haven't had such a circus with a good smartphone. I love Google products, but I feel very disappointed because Pixel cost me a lot of money and this is definitely a factory defect.
Click to expand...
Click to collapse
Sorry to hear this, and surprising, as Germany is a supported country with many authorized repair centers. Did you send it to PSC? They claim to be Google-certified and have all factory parts? COVID-19 may also be delaying things. Hope things turn out well for you. :good: