Galaxy m20 Device Storage corrupted - Samsung Galaxy M20 Questions & Answers

the message reads , Device Sotrage corrupted , The data partition was corrupted , its needed to reset the device to the default , this will delete all data , when i click to reset , the device just restart and come back to this message again , the device doesn't enter recovery mode or download mode , it just starts and come to the error message , i just need to fix this thing as fast as possible

Related

[Q] boot sequence disturb

choosing from internal SD card and then 2nd file.
my device prompted completion success messages but it took very short time.
----------------------------------------------------------------------------------------------------------------------
now what happened after doing this. my device is displaying same booting screen of CWM-based recovery v5.5.0.4 on each re-boot.
i treid many times by unplug the battrey but unfortunately unsuccessfull.
After that i did Wipe data/factory reset and wipe cache partition.
----------------------------------------------------------------------------------------------------------------------
I tried it through window's based utility Odin v4.43 but it could detect my device usb driver even after success of USB driver installation.
it didn't display Added in message box.
now what should i do ?
i already installed samsung Kies but still undetected my Phone device and says "Your phone device is not supported by Kies2.0".
I tried some old version of Odin 3v1.8 , it detected the port and displayed Added but failed to write ROM on my device.
-----------------------------------------------------------------------------------------------------------------------
My desktop machine's OS : windows 8 64 bit enterprise edition.
----------------------------------------------------------------------------------------------------------------------------------------------------------
I am unable to install new ofor revert back my OS because when i Hold Vol Down + Home + Power, This is not putting me in Download Mode instead Ramdump Mode.
I need your guidence to resolve the issue. Thanks in advance.
Please ask for further details if required.

[Q] samsung galaxy boot problem

hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
ivojima1970 said:
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
Click to expand...
Click to collapse
Would be great if you tried to explain what you tried to do with odin anyway.
what rom you tried to install?
ivojima1970 said:
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
Click to expand...
Click to collapse
Who says?
Which Rom are you trying to use and what are you coming from?
If flashing ODIN for JVU Rom :
Use ODIN with PIT File
PIT File Incase you need it : LINK
Open Odin and select 512 .PIT, and put in your files for : CSC, PDA, MODEM.
Check Re-partition and don't touch any other settings.
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER.
Attach Phone
When you have all the files needed in ODIN, say JVU Rom for example as thats what we are using here
Click Start let it Run
Once complete you will see S logo on phone
Unplug Phone > Let it power up then Power Off > Again into Download mode
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted *File is included in ODIN Files*
Same again when you see S Logo on Phone unplug Phone Cable
Close ODIN
Let phone boot up ....
What I do now is go into
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Before doing this make sure you have what you need from the phone as it will ERASE everything!
Enable USB Debugging by going to Settings > Applications > Development > Check USB Debugging
Plug in Phone and copy over your chosen Custom ROM that you want
Reboot into Recovery : VOL UP + MENU + POWER
Wipe the 4 things (probably know these... you should do)
If not you choose these by using the left side keys on the phone and to apply changes click Menu key
WIPE : data/factory reset > cache partition
Scroll down and go to advanced
Dalvik Cache > Battery stats
Go Back
Install ZIP (ROM) from Zip Card
Reboot Phone when complete... DONE!
Hope this helps a lot of people if not just ask here if you are still having issues to save peole posting same questions again and again
I made up the first part, but after the phone went into recovery mode
The screen shows the following:
installin update ...
successfully installed package.
- Copying media files ...
e: failed to mount / sdcard (file exists)
e: copy_dbdata_media: cant mount / sdcard your storage not prepared yet. please use meny VI for format and reboot actions.
meida files copy failed.
- Wiping data ...
Formatting / data ...
e: format_volume: rfs format failed on / dev/block-mmcblkqp2
Formatting / dbdata ...
Formatting / cache ...
deleting meta data
Data wipe failed.
- Appling Multi-CSC ...
installing multi-csc
Cant access to / system / csc / eng / system /.
successfuly applied multi-csc.
Flash dbdata.rfs as PDA in Odin 1.85. Reboot. Congratulate yourself.
Sent from my GT-I9000 using Tapatalk 2
Helpppp
I have exactly the same problem. I had froyo 2.2 im new to this odin all these settings. Yesterday i was tried rooting my phone and I did. but after I mounted a courrupted rom from the recovery. and my android doesn't want to load. I followed the same instructions you just gave him. on these posts but now when i turn on the phone its the logo comes and nothing loads. Only Downloading VOL DWN + MENU + PW is working.
Are you talking to me devildrake? No, your problem is different and you need to flash the rom again too, not just dbdata lol. Do this.
Flash Gingerbread, in Odin (I always used JW4 but JVU will be fine) with 512 pit file and repartition checked. Untick reboot. Once its finished, unplug the USB cable and take the battery out. Put the battery back in and boot into download mode. Reset Odin. USB cable back in. Tick reboot again. Put dbdata.rfs in PDA. Flash.
Should boot into gingerbread. I've done this a LOT of times... Then you can go back to Odin and root.
If that doesn't work then I'd download a different version of GB, download new 512 pit, and download a new dbdata.rfs. Must be one of those corrupt.
Sent from my GT-I9000 using Tapatalk 2

wipe data/factory reset changes doesn't apply (Note N7000ZSLO2 Model:SHV-E160S)

*NEED HELP PLS*
1-My phone doesn't keep time/date/language when I reboot
2-The language goes back to French when I reboot
3-All my apps show the stop error when i make any setting change after reboot
4-Any app that I install after reboot will disappear on the next reboot, except the SU app I installed as zip from sdcard in CWM-based recovery window
5-The phone make sound when I connect to pc but doesn't to ask to chose connection mode, so pc doesn't detect it even though I have USB Debug enabled
6-I did the wipe data/factory reset several times but there's no change when i switch ON the phone even though the wipe data/factory reset was successful.
7-The only button combination that works is the one to go to Download Mode (Volume Down + Home + Power )
8-I can only go to Recovery Mode when I try to factory reset in the phone settings. The phone will restart and take me to Recovery Mode
-Odin is unable to detect the phone.
I just think is the internal storage that is corrupted or something but i can't tell for sure. So please i need ur help on how to fix this problem or if there is any app that i can install as zip from sdcard in CWM that can scan or format or fix this problem
Samsung Galaxy Note N7000ZSLO2
Model Number : SHV-E160S

Error accessing the Internal storage on Zuk Z2 Pro

I have been getting this error when I try to access the Internal storage on my Zuk Z2Pro,
Error " You do not have permission to access this device "
I have tried the following steps
1. Reinstall to factory version using the QFIL method
2. Tried to unlockboot loader ( It was unlocked in the first place but reattempted ) in the fastboot mode, it does say bootloader unlocked, but the secure boot is enabled ( not sure if secure boot should be enabled )
3. Reinstalled the drivers for fastboot and adb.
4. I am able to FTP to the internal storage using Wifi, but not through the USB cable in windows explorer. Even tried creating a new account to check if it was a windows profile issue.
5. Reflashed the 2.3.044 ( for some reason Zuk pushed the update )
Any help on the same ?
Did it work before?
Normally after pluging in your phone to pc you have to drag the notification bar and allow mtp access on your phone.
Afterwards you can see the storage on your phone.

help pls rog phone 2 soft bricked

Getting Failed to clear BCB message: failed to open /dev/block/boot/device/by-name/misc: No such file or directory after phone crash​
cant solve this please help
tried edl recovery flashed well but didnt solve problem
i have unlocked the bootloader and flashed many raw firmware didnt solved problem
flashed twrp sucessfully but cant mount storage intenal storage 0mb and cant swipe anything
get this message everytime in recovery
Getting Failed to clear BCB message: failed to open /dev/block/boot/device/by-name/misc: No such file or directory after phone crash​
please help
I have no idea it helps, I had my phone crash on me and me trying my old-and-tried flashing etc. I did not have such BCB message, but it sounds like there is an issue with the partitions or partitioning.
There are nice YouTube videos at least that show how to flash the stock ROM (not giving link here for advertising etc).
it boils down to (FIRST get your data off the phone as you are going to lose this)
- TWRP being bootable
- in TWRP: factory reset, wipe data
- flash stock ROM twice: to partition A and after reboot to TWRP, to partition B. I do not know why this needs to be done, love to learn it by myself.
- flash without wiping a custom recovery if wanted.
- restore your data

Categories

Resources