Database Develop

[Q] Galaxy S5 G900A Stuck In Downloading/Firmware Upgrade Mode

I have searched for about the past 3-4 hours which is a lot longer than it usually takes for me to get to the bottom of these dang things. My phone (Galaxy S5 G900A Lollipop 5.0) has been really screwy on the WiFi lately (home, out in public, family members homes) so I decided (after a factory reset, safe mode, etc failing) to go ahead and try to downgrade my phone. So I went online and found out you can do it with Odin (3.09, 3.10, 3.06) and attempted it. I downloaded a stock 4.4.4 firmware and went to work. Immediately it failed with the error I am still getting which is the following:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Example of the firmware update screen: Unable to post outside link, just google "firmware update encountered an issue galaxt s5" it's the first image.
Example of the download screen I use with Odin (as instructed): Unable to post outside link, just google "download mode glaaxy s5" it's the first image.
I have attempted using both the old and new version of Kies to perform the emergency and normal firmware update procedures. My phone does not show in the emergency firmware recovery screen and the firmware update mode ends in an error telling me to use the emergency firmware update, which as mentioned does not work.
With Odin I have attempted: Multiple computers, multiple USB ports on each computer, reinstalling Samsung drivers, restarting computer, multiple Odin versions, multiple firmware files (4.4.4, 4.4.2), running as administrator
Windows 8.1
Update on errors: My screen shows the following error on my phone in RED under "UDC Start" when Odin Fails:
SYS REV CHECK FAIL : Refer 2 > Binary 1
SECURE CHECK FAIL : system

You can't downgrade from 5.0. Flash 5.0 and you will be fine. If I'm not mistaken, the new bootloader is not backwards compatible and therefore won't let a downgrade happen.

Took to Best Buy, flashed and resolved in less than 10 minutes at Samsung center.

daddynexxus said:
Took to Best Buy, flashed and resolved in less than 10 minutes at Samsung center.
Click to expand...
Click to collapse
You won't be able to downgrade and that was your problem in the beginning

Same issue
I have having the same issue, I tried flashing Odin 4.4 back to the S5 once it has 5.0. It now errors out in Odin and in Kies, I really dont know what to do. Error: SW Rev Check Fail : Aboot Fused 3 > Binary

Rayman3030 said:
I have having the same issue, I tried flashing Odin 4.4 back to the S5 once it has 5.0. It now errors out in Odin and in Kies, I really dont know what to do. Error: SW Rev Check Fail : Aboot Fused 3 > Binary
Click to expand...
Click to collapse
Go here and follow direction. Do the last section of the OP.
http://forum.xda-developers.com/showthread.php?p=60012961
Sent from my SAMSUNG-SM-G900A

Unable to flash rom after failed update on Kies

Hey guys I am was going from rooted 4.4 to 5.1.1 and running the dynamic kat rom...I downgraded to stock 4.4 and attempted to update through Kies...well the update hung at 87% for a long time and eventually failed, I got the "system encounted a firmware issue " error and was unable to restart...Kies will not recognize my note no matter how many times I flash the drivers and Odin always fails no matter the version I try to flash...Even SmartSwitch says "device failed to recognize", and I cannot flash twrp either (I even tried flashing PIT files which failed as well) (I still get a "comm4" connection in odin)
(4.4/5.0.1) <ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn

Had a similar issue too. Do an emergency recovery from kies. it will download latest stock firmware restore.

Kies cannot see my phone and I get odin error ; SW REV CHECK FAIL : [aboot]Fused2 > Binary 1 [1] eMMC write fail : ABO when I try to flash ANY rom

m33android said:
Kies cannot see my phone and I get odin error ; SW REV CHECK FAIL : [aboot]Fused2 > Binary 1 [1] eMMC write fail : ABO when I try to flash ANY rom
Click to expand...
Click to collapse
Have you tried a full internal wipe from recovery?
maybe retry 4.4.4 through ODIN and then moving forward?
up to date on modem/bootloader?
also, sometimes flashing in ODIN just fails for no apparent reason. when it does, you must unplug the phone, reboot the phone and enter bootloader mode again every time.

CF-Root for SM-G903M 6.0.1, also working on SM-G903F 6.0.1

This is for SM-G903M, but I flashed it on my SM-903F and everything it's working without any problems
Download it from here: https://download.chainfire.eu/780/CF-Root/CF-Auto-Root/CF-Auto-Root-s5neolte-s5neolteub-smg903m.zip

Why flash SM-G903M root when there is a SM-G903F root?

APKCCCP said:
Why flash SM-G903M root when there is a SM-G903F root?
Click to expand...
Click to collapse
It is, but for 5.1.1
This is for 6.0.1.

CristianDrăgan said:
It is, but for 5.1.1
This is for 6.0.1.
Click to expand...
Click to collapse
Works fine for me on 6.0.1.
Thanks anyways!

It seems it's not working as it should. Some apps are reporting no root (ES File Explorer, MyProfiles...) but RootChecker and Titanium have verified root... weird... will try version for G903F on 6.0.1 as APKCCP says it's working fine...
Sent from my SM-G903F using XDA-Developers mobile app

silcay said:
It seems it's not working as it should. Some apps are reporting no root (ES File Explorer, MyProfiles...
Click to expand...
Click to collapse
That's because the su binaries are not in xbin, which is required by apps like ESFE.
Solution here:
http://forum.xda-developers.com/galaxy-s5/general/fix-es-file-explorer-root-error-t3382537

APKCCCP said:
That's because the su binaries are not in xbin, which is required by apps like ESFE.
Solution here:
http://forum.xda-developers.com/galaxy-s5/general/fix-es-file-explorer-root-error-t3382537
Click to expand...
Click to collapse
That did the trick. Working great. Thx APKCCCP. :highfive:

Ich doesn't work!
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-s5neolte-s5neolteub-smg903m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin engine v(ID:3.1005)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> recovery.img
<ID:0/011> NAND Write Start!!
<ID:0/011> cache.img
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
Basisbandversion: G903FXXU1BPD4 Android 6.0.1

doesnt work for me neither, it says failed for the smg903f. what am i doing wrong?

Not working on my G903F either using the H3G MM Rom(UK), will maybe try to remove all the old bits of SU left over from Lollipop rom...
Just tried the G903F root for 5.1.1 and that works! Thanks @apkcCP

yep !
CristianDrăgan said:
This is for SM-G903M, but I flashed it on my SM-903F and everything it's working without any problems
Download it from here: https://download.chainfire.eu/780/CF-Root/CF-Auto-Root/CF-Auto-Root-s5neolte-s5neolteub-smg903m.zip
Click to expand...
Click to collapse
The same working #1

help
hola, resulta que hoy quise rootear el smg 903m y por error olvide de activar el modo de depuracion USB y ahora no arranca

willycost said:
hola, resulta que hoy quise rootear el smg 903m y por error olvide de activar el modo de depuracion USB y ahora no arranca
Click to expand...
Click to collapse
English?

Thanks. worked really fine for my G903F.

mslogo said:
Ich doesn't work!
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-s5neolte-s5neolteub-smg903m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin engine v(ID:3.1005)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> recovery.img
<ID:0/011> NAND Write Start!!
<ID:0/011> cache.img
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
Basisbandversion: G903FXXU1BPD4 Android 6.0.1
Click to expand...
Click to collapse
that happens to me too. sorry for my English

Gentlemen, I tried flashing cf-auto-root (this one, and also the most recent version acquired directly from cf-root website, as my firmware is at UBU1BPK1), but after ODIN Pass! it reboots and just show the message "Recovery is not seandroid enforced".
After that, it reboots again to normal firmware, not rooted.
I even tried un-checking the "auto reboot" option in ODIN, and doing a manual reboot to recovery mode (as it was supposed to force the cf-root to install).
But it just repeats the same behaviour. I kept holding vol_up+button+power and it kept rebooting trying to enter recovery but just showing the message "recovery is not seandroid enforced".
At the time I released the buttons, it rebooted to normal firmware, not rooted.
Tried different Odin versions (3.10.6, 3.12...), nothing did the trick.
Any tips?
I've also enabled "USB debug" and "unlocked OEM" under developer settings.
Couldn't find "reactivation lock" option under account settings / security settings.

ciberglo said:
Gentlemen, I tried flashing cf-auto-root (this one, and also the most recent version acquired directly from cf-root website, as my firmware is at UBU1BPK1), but after ODIN Pass! it reboots and just show the message "Recovery is not seandroid enforced".
After that, it reboots again to normal firmware, not rooted.
I even tried un-checking the "auto reboot" option in ODIN, and doing a manual reboot to recovery mode (as it was supposed to force the cf-root to install).
But it just repeats the same behaviour. I kept holding vol_up+button+power and it kept rebooting trying to enter recovery but just showing the message "recovery is not seandroid enforced".
At the time I released the buttons, it rebooted to normal firmware, not rooted.
Tried different Odin versions (3.10.6, 3.12...), nothing did the trick.
Any tips?
I've also enabled "USB debug" and "unlocked OEM" under developer settings.
Couldn't find "reactivation lock" option under account settings / security settings.
Click to expand...
Click to collapse
Just to add that I finally got it working.
Flashed a different country variant (BVO - Bolivia), that has BQA1 firmware and also have the same Modem/CP Version as my ZTO (Brazil) in BPF1. I was afraid of choosing a different variant from Brazil with different modem version, and being not able to use my local area signal provider.
It worked like a charm. I wiped data/factory reset. Then I flashed the BQA1 firmware using ODIN 3.12.3 (last version). Logged in google account (didn't logged on samsung account, neither choosed a lock screen).
Then, flashed cf-auto-root from autoroot.chainfire.eu for g903m BQA1 and it worked like a charm!

[STOCK][Odin] OFFICIAL T713 STOCK FIRMWARE T713XAR1APD9

Here is the official stock firmware for the New (2016) Galaxy Tab S2 8.0" T713.
Use this to restore your tablet or fix a soft brick.
This requires Odin to flash.
Model Name: Galaxy Tab S2 8.0
Model: SM-T713
Country: Cellular South (XAR)
Firmware Version: T713XXU1APD9
OS: Android Marshmallow
OS Version: 6.0.1
PDA: T713XXU1APD9
CSC: T713XAR1APD9
Download T713XAR1APD9 Here

Hello everybody!
Sorry if this si not fine for me to post in this thread, but I think my question is quite related, in case I apologize in advance.
I recently bought a Galaxy tab S2 8" (SM-T719).
I installed the TWRP and applied SuperSU (as per guide: http://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627)
All fine...
Only later I recall that I stupidly forgot to make a complete STOCK backup. If I need, can I use the STOCK provided in this thread even if it is for T713?
The only difference I see comparing the specs is the additional 2G support.
Thank you in advance and thanks to everybody for the great work!
PS: if it can be usefull to anybody I can make a BACKUP of the current state of the tablet.
Best regards!!

DeeXii said:
Here is the official stock firmware for the New (2016) Galaxy Tab S2 8.0" T713.
Use this to restore your tablet or fix a soft brick.
This requires Odin to flash.
Model Name: Galaxy Tab S2 8.0
Model: SM-T713
Country: Cellular South (XAR)
Firmware Version: T713XXU1APD9
OS: Android Marshmallow
OS Version: 6.0.1
PDA: T713XXU1APD9
CSC: T713XAR1APD9
Download T713XAR1APD9 Here
Click to expand...
Click to collapse
Can we use the firmware for T813 as well?
Or do you know a source where to get that firmware?

Thanks...about to Root and went to SamMobile and another Samsung site to get Stock in case of any problems Rooting....But Its NOWHERE to be found!!! A quick Google search led me here to trusted XDA!!! Thanks Bro!!

I cant believe there is no development for this 713 Tab! I have bought or tried everything Samsung and this is a a great tablet...I had the Tab S 32GB and sold it...never found another..and Note Edge also that had nooo development as well...I guess I get the things that are not popular..2014 Note 10.1 and Note Pro 12.2 there are NO Roms on those either! My Note 5 is the only thing I get to flash...But thanks again...I needed this
Sent from my SM-T713 using XDA-Developers mobile app

DionWhite33 said:
I cant believe there is no development for this 713 Tab!
Click to expand...
Click to collapse
This will change when I get my hands on one Friday

I've just tried to flash this firmware for my SM-713 tab and it does not go past the Samsung logo (fading in/out).
I used Odin 3.10.7 and extracted the file "T713XXU1APD9_T713XAR1APD9_HOME.tar.md5" then pointed the AP field in Odin, to the file and flashed.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> sec.dat
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

Bhups said:
I've just tried to flash this firmware for my SM-713 tab and it does not go past the Samsung logo (fading in/out).
I used Odin 3.10.7 and extracted the file "T713XXU1APD9_T713XAR1APD9_HOME.tar.md5" then pointed the AP field in Odin, to the file and flashed.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> adspso.bin
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> sec.dat
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Factory reset

Lightn1ng said:
Factory reset
Click to expand...
Click to collapse
Thanks!!!
Factory rest worked great!!

Bhups said:
Thanks!!!
Factory rest worked great!!
Click to expand...
Click to collapse
Awesome!

Lightn1ng said:
This will change when I get my hands on one Friday
Click to expand...
Click to collapse
Are you cooking something up? I cant wait! Im also getting an update from Samsung thats about 285MBs...looks to small to be Firmare.maybe its a Security Patch?
Sent from my SM-T713 using XDA-Developers mobile app

DionWhite33 said:
Are you cooking something up? I cant wait! Im also getting an update from Samsung thats about 285MBs...looks to small to be Firmare.maybe its a Security Patch?
Sent from my SM-T713 using XDA-Developers mobile app
Click to expand...
Click to collapse
Lightning ROM... Its in the dev forums...

There's a newer version for this firmware T713XXU1APG1 (build 01.07.2016, the one in the first post is build 20.04.2016). I'm not sure what the difference is. Has anybody already downloaded the new version and saved it somewhere on the Internet? A free download from https://samsung-firmware.org/model/SM-T713/region/XAR/ takes almost 7 hours.

dxxvi said:
There's a newer version for this firmware T713XXU1APG1 (build 01.07.2016, the one in the first post is build 20.04.2016). I'm not sure what the difference is. Has anybody already downloaded the new version and saved it somewhere on the Internet? A free download from https://samsung-firmware.org/model/SM-T713/region/XAR/ takes almost 7 hours.
Click to expand...
Click to collapse
I've hosted the file on a separate mirror on Mega: https://mega.nz/#!uZ0S2LKJ!cv9_833R1kUVndRl4lpIM_UV51WiCtbVrWAd9S3m2TQ. No file changes, just a download/rehost.

Image restore via Odin fails with blue caution triangle screen
I had my S2 SM-T713 8.0 Rooted and tried to install Lightning. The WiFi failed, so I flashed the WiFi fix. Still no WiFi. Restored the rooted TWRP backup. It booted up to the lock screen, but refused to allow me to use the only pin that had ever been entered on the machine.
After numerous attempts to get around the pin issue, I attempted to flash this stock firmware via Odin. Every attempt failed at a different point. MD5 double checked and matched. The latest attempt ran as follows:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> modem.bin
<ID:0/003> adspso.bin
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am stuck at the blue screen saying that An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software. That software reports that my device is not supported. The other thing on the screen is a message that SU REV CHECK FAIL : [aboot]Fused 2 > Binary 1. I also cannot turn off the screen.
I have been rooting and running numerous ROMS on phones and tablets for 6 years. Any hope left?

stock firmware
Sooo, I made the fatal mistake of rooting with out having the back-up stock os...... long story short, now I cant find out which version of the firmware I need. Can i find out what the stock firmware was by my TABLETS' model number??? btw......
SM-T713NZKEXAR is my model and i cant seem to find it anywhere.
please helppp

dirtymikeandtheboyz said:
Sooo, I made the fatal mistake of rooting with out having the back-up stock os...... long story short, now I cant find out which version of the firmware I need. Can i find out what the stock firmware was by my TABLETS' model number??? btw......
SM-T713NZKEXAR is my model and i cant seem to find it anywhere.
please helppp
Click to expand...
Click to collapse
Use the one linked in the OP.
Before you odin twrp or anything else let the tablet update to the latest firmware.

Success after loading the new updated Samsung firmware from link in post by dxxvi.
"I had my S2 SM-T713 8.0 Rooted and tried to install Lightning. The WiFi failed, so I flashed the WiFi fix. Still no WiFi. Restored the rooted TWRP backup. It booted up to the lock screen, but refused to allow me to use the only pin that had ever been entered on the machine."
Finally had success after loading the new updated Samsung firmware from link in post by dxxvi (took almost 20 hours slow load). Confirmed that it does require a factory reboot after hanging at Samsung logo.
The new firmware allows you to choose whether to require a pin after reboot or just accept fingerprint input.

There is a newer version of of the firmware T713XXU2APJ1, release date 05.10.2016

HELPP
Model - sm-t713nzkexar
had a issue with wifi not working when flashing custom rom, long story short... i wanted to go back stock firmware and is the T713XAR1APD9 not the stock firmware for my device?? i tried to flash and it failed, and for some reason i cant attach the screenshot of the log in odin, but after failure while still in "download mode", at the top of screeen tablet says,
"SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1"

AT&T NOTE 5 flash to T-Mobile Version - Secure Check FAIL: (BOOTLOADER)

Hello! I am new to XDA.
I moved carriers from AT&T to T-Mobile. I am attempting to install T-Mobile's ROM on an AT&T Galaxy Note 5 SM-N920A in order to address some issues that I have had with Wi-Fi Calling, and phone call quality. I don't want ROOT or any other customizations. Just stock T-Mobile Android 7.0. I have been attempting to use the following ROM's
N920TUVU4EQG3_N920TTMB4EQG3_N920TUVU4EQG3_HOME.tar .md5
N920TUVU4EQJ3_N920TTMB4EQJ3_N920TUVU4EQJ3_HOME.tar.md5
I am receiving the same error on the phone during the flash attempt "Secure Check Fail: (bootloader)
Running ODIN 3.12.10 as Admin
Installed Samsung USB drivers
USB Debugging is checked.
I performed the firmware swap with my Galaxy S7 with no problems. There were 4 files in the Zip when I did that process (each dropped in ODIN path's BL, AP, CP, and CSC), but I could not find these 4 for my Note5. Each time I downloaded from Updato or SamMobile there was only on "Ap" file. Is that the issue?
PHONE SCREEN TEXT:
Odin Mode
Download Speed: Fast
Product Name: SM-N920A
Current Binary: Samsung Official
System Status: Official
FAP LOCK: Off
SECURE DOWNLOAD: Enabled
Knox Warranty Void: 0
RP SWREV: B:4 K:0 S:1
Secure Check Fail: (Bootloader)
ODIN OUTPUT:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Successfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1210)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialization..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> cm.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
Any Suggestions? Thanks in advance!

i have the same problem