Related
need help to unbrick honor 4c.
after flashing update.zip from CWM recovery I have full brick.
then power on pressed - leds flash red and green, after few seconds device is shown as ㌲㔴㜶㤸 and turned off after 10 or 20 seconds.
any way to unbrick?
i guess everyone has to experience a brick at their brand new Android devices at least one time then they'll be able to share their unbrick experience...
Though i don't own a 4C, manage to find your firmware here, more info here, i'm extremely good with google search...
codelover shared tons of infos here but its for 3C(MTK), hopefully its relevant & Best of Luck or you'll have to sent it back to Huawei... :laugh: :fingers-crossed:
michfood said:
need help to unbrick honor 4c.
after flashing update.zip from CWM recovery I have full brick.
then power on pressed - leds flash red and green, after few seconds device is shown as ㌲㔴㜶㤸 and turned off after 10 or 20 seconds.
any way to unbrick?
Click to expand...
Click to collapse
Hey, I just had the same problem.. have you solved anyway?:fingers-crossed:
Damaged bootloader
michfood said:
need help to unbrick honor 4c.
after flashing update.zip from CWM recovery I have full brick.
then power on pressed - leds flash red and green, after few seconds device is shown as ㌲㔴㜶㤸 and turned off after 10 or 20 seconds.
any way to unbrick?
Click to expand...
Click to collapse
Please help me fix my huawei honor 4c B063. First i root this phone without unlocking the bootloader and successfully rooted it but after a month when i tried to factory reset it, it stack in honor logo so i search how to hard reset it but still stack in honor logo. Then i download the stock firmware and save the UPDATE.APP in a folder dload in sd card. So i turn off my phone then press power+vol up+vol down but till stack in huawei logo. I hope you can help me with this sir. TIA
I have problem. My phone is Brick. my phone power on to Rescue mode
Error
Func NO : 8 (hifi image)
Error NO : 1 (security verify filed)
The only thing that goes is fastboot
via fastboot I try uploading 3 rooms
without result
Pls Help me
Sporry for ma bad english
starcomp said:
I have problem. My phone is Brick. my phone power on to Rescue mode
Error
Func NO : 8 (hifi image)
Error NO : 1 (security verify filed)
The only thing that goes is fastboot
via fastboot I try uploading 3 rooms
without result
Pls Help me
Sporry for ma bad english
Click to expand...
Click to collapse
that's a very bad problem..., see here http://forum.xda-developers.com/p8lite/help/stuck-rescue-mode-screen-please-help-t3244872 if you find something, i think the easy way is installing a rom with a rom on dload and 3 buttons, since hifi image is impossible to flash it using fastboot, huawei dont let flash that from there, the only way to install it is from recovery 3 buttons
EDIT: and how you deleted hifi image? what did you do? lol
Don´t work recovery and flash from sd card. Run only fastboot
did you fix your device?
2020
anyone found a solution ???
same problem with device shows as ㌲㔴㜶㤸
Hi folks.
It seems there's not much info about the phone.
That is why let's share any useful information regarding it.
What I have found so far:
ColorOS recovery - start the phone with "Vol Down" + "Power" buttons
Qualcomm Download mode (QDL mode, 9008) - from ColorOS recovery tap a few times recovery version line.
For now I did not succeed in booting into fastboot mode. It immediately reboots into system
EDIT. 3 taps on Version string bring QDL mode (see the attachment). After first tap string turns green.
yakovpol said:
Hi folks.
It seems there's not much info about the phone.
That is why let's share any useful information regarding it.
What I have found so far:
ColorOS recovery - start the phone with "Vol Down" + "Power" buttons
Qualcomm Download mode (QDL mode, 9008) - from ColorOS recovery tap a few times recovery version line.
For now I did not succeed in booting into fastboot mode. It immediately reboots into system
Click to expand...
Click to collapse
Did you see oem unlock toggle in developer settings? Try to adb via the model of the phone instead?
Also could you provide a camera2 test info in FULL mode here as an attachment please?
yakovpol said:
Hi folks.
For now I did not succeed in booting into fastboot mode. It immediately reboots into system
Click to expand...
Click to collapse
Hi. Bootloader not unlock now. Because you can't boot to fastboot.
New version came out today - RMX1991_11_A.11
Yea, a new version came out, dark mode is included now, security level is October 5th. The list of the changes is quite long (see it attached if interested). The shot of the update process is attached too. What "realme Lab" means is in the attachment too.
xterminater07 said:
Did you see oem unlock toggle in developer settings? Try to adb via the model of the phone instead?
Click to expand...
Click to collapse
The OEM option is present, see the attachment.
The second part of the statement about adb is not clear.
If you mean adb reboot bootloader, it does not help either. The phone boots into fastboot mode and immediately (in about half a second) reboots to system.
adb starts working only if File Transfer is enabled after USB cable is connected.
xterminater07 said:
Also could you provide a camera2 test info in FULL mode here as an attachment please?
Click to expand...
Click to collapse
See the file attached. You are welcome.
The phone stays in fastboot mode for 0.6 sec
The text I see is
已进入Fastboot
长按电源键6〜10秒或重装电池退出
What means
You entered Fastboot
Press and hold power button for 6 - 10 seconds or reload battery to exit
Is there any way to stop there?
yakovpol said:
The text I see is
已进入Fastboot
长按电源键6〜10秒或重装电池退出
What means
You entered Fastboot
Press and hold power button for 6 - 10 seconds or reload battery to exit
Is there any way to stop there?
Click to expand...
Click to collapse
so what happens after that 0.6second in fastboot? It reboots back to normal?
---------- Post added at 04:23 PM ---------- Previous post was at 04:19 PM ----------
yakovpol said:
See the file attached. You are welcome.
Click to expand...
Click to collapse
when you run the camera2 test app by the author tetsomething something in playstore, hit analyze, then go to the "Full" tab on top, then share it as file on here if you can. Or copy and paste it to notepad and upload it.
Here you are
Today's answer from Realme Support for bootloader unlock and kernel sources
Hello,
Greetings from realme Europe. Thank you for reaching out to us.
We would like to inform you that as of now bootloader unlock for realme X2 and kernel source code is not available. Further, kindly stay tuned to our official website: https://www.realme.com/eu/ for the latest news and updates. Have a nice day.
Warm Regards,
Team realme Europe
yakovpol said:
Hello,
Greetings from realme Europe. Thank you for reaching out to us.
We would like to inform you that as of now bootloader unlock for realme X2 and kernel source code is not available. Further, kindly stay tuned to our official website: https://www.realme.com/eu/ for the latest news and updates. Have a nice day.
Warm Regards,
Team realme Europe
Click to expand...
Click to collapse
It's good. But where is tools for it?
Some sort of test in recovery
ColorOS recovery, tap recovery version line 10 times, a prompt pops up about nearly 30-minute test. What kind of test I do not know. It took about 17 minutes. See the shots attached.
Also it is not clear to me when tapping on recovery version line initiate QDL mode, when this test?
Installation attempt for Euro version of software
There are two documented ways to install a downloaded ROM file: from inside ColorOS (tap *.ozip from built-in file browser; boot recovery and initiate installation from there). Both fail, but the second one gives interesting result (see the shot attached; native and alien=euro files are both visible).
Realy frustating. I guess it will neuer come because of OPPO. 5 Pro can do, eventuell x2 pro can do.
The bootloader looks different to x2 pro and 5 Pro.
With the Test lap apk you will get in touch with OPPO.
What exactly the app is Ding i dont know.
I look inside the smali code but iam not a coder.
I guess we download a new Bootloader Image and install it.
Could someone from you post some files for me?
/sbin/recovery
Second one
adb pull /vendor/lib64/libapplypatch_jni.so
Have you got CN or global devices?
yakovpol said:
There are two documented ways to install a downloaded ROM file: from inside ColorOS (tap *.ozip from built-in file browser; boot recovery and initiate installation from there). Both fail, but the second one gives interesting result (see the shot attached; native and alien=euro files are both visible).
Click to expand...
Click to collapse
So, you directly tried to switch from Chinese to Global rom by using recovery! Have you succeeded yet?
I want to change my rom to global to...
Plzzz help
FYI
It seems (at least once it worked to me, though it seems quite strange) the language mix in stock recovery may be solved by format userdata in recovery.
Iam trying to unlock the EU Device 1993.
I dont think this will work.
Only China devices 1991 will work.
djsven said:
Iam trying to unlock the EU Device 1993.
I dont think this will work.
Only China devices 1991 will work.
Click to expand...
Click to collapse
They have limit like 1000 unlocks per month or something like this... May it be the reason?
djsven said:
Iam trying to unlock the EU Device 1993.
I dont think this will work.
Only China devices 1991 will work.
Click to expand...
Click to collapse
Have you unlocked the Realme X2 1993 (European version) successfully? If yes then with which in deep testing app?
yakovpol said:
The phone stays in fastboot mode for 0.6 sec
The text I see is
已进入Fastboot
长按电源键6〜10秒或重装电池退出
What means
You entered Fastboot
Press and hold power button for 6 - 10 seconds or reload battery to exit
Is there any way to stop there?
Click to expand...
Click to collapse
How to solve problems
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?
Can anyone please help me? I did the all steps but nothing works and I get the STATUS_EXT_RAM_EXCEPTION (0xC0050005) error... The only solution I found is to drain the battery while the device is bootlooping but sadly, my phone vibrates 1 second and dies because there is no fastboot or recovery or nothing to boot with, I tried SP Flash Tool but it stucks at Download DA 100% then shows me the ram error. PLEASE HELP ME
P.S: I know people will say MTK Bypass is a virus but please ignore it and focus on my main subject
Use latest fastboot rom and download agent to mtk all.bin
Restart phone by power+ volume key
Also usb dk driver and libusb tool
Or remove back cover and battery take care with fingerprint
Already done everything you said, nothing works.
iOussamato_ said:
Already done everything you said, nothing works.
Click to expand...
Click to collapse
Try again
faisal9666 said:
Try again
Click to expand...
Click to collapse
What do you mean try again? I tried it 50 times and still doesn't work, tried so many other roms and DAs and NOTHING
iOussamato_ said:
What do you mean try again? I tried it 50 times and still doesn't work, tried so many other roms and DAs and NOTHING
Click to expand...
Click to collapse
Very strange
STATUS_EXT_RAM_EXCEPTION (0xC0050005)
1.
Hello bro, I only registered on XDA to inform you and gonna post on other thread for people suffering from this error.
2.
I have redmi 9c angelica
3.
I had the same issue like yours. Just fixed it 2,3 mins ago after many days of suffering. I tried 3 fastboot roms in which only this work (angelica_global_images_V12.0.12.0.QCRMIXM_20210412.0000.00_10.0_global). I hope it also work with you. Give a try
i followed this and boom now all of my stress has been released.
Firmware link
How to Unbrick Redmi 9C (angelica) without using auth account. Tested and working! - OmBob Opreker
This is tutorial how to unbrick Xiaomi Redmi 9C (angelica) using mediatek bypass tool and sp flash tools without using mi auth account using global stock
ombob.my.id
iOussamato_ said:
Can anyone please help me? I did the all steps but nothing works and I get the STATUS_EXT_RAM_EXCEPTION (0xC0050005) error... The only solution I found is to drain the battery while the device is bootlooping but sadly, my phone vibrates 1 second and dies because there is no fastboot or recovery or nothing to boot with, I tried SP Flash Tool but it stucks at Download DA 100% then shows me the ram error. PLEASE HELP ME
P.S: I know people will say MTK Bypass is a virus but please ignore it and focus on my main subject
Click to expand...
Click to collapse
use this video 100% working
Device locked and need test point. You can't use MTK bypass and SP Flashtool directly. Your device may have patch on July 2022 and newest version (12.5.3 and above).
And if you see 3 dot pin for TP, it's Redmi 9c but if you found only 1 point (for TP), it's Redmi 9c NFC.
Remember to use TP for any operation and if not work, TP with Professional software.
demoimoet said:
Device locked and need test point. You can't use MTK bypass and SP Flashtool directly. Your device may have patch on July 2022 and newest version (12.5.3 and above).
And if you see 3 dot pin for TP, it's Redmi 9c but if you found only 1 point (for TP), it's Redmi 9c NFC.
Remember to use TP for any operation and if not work, TP with Professional software.
Click to expand...
Click to collapse
where are test points located?
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
ax0 said:
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
Click to expand...
Click to collapse
did you try Yurian's post info, my phone was totally bricked and thats what kinda worked, I left extensive guides on how I did it on there too
also, here are the files that worked for me (redmi 9a, not the exact same but its pretty similar)
your ROMs should be these (use the fastboot one, to the best of my knoledge, the recovery one only changes the recovery hence, its useles to unbrick) if that doesnt work try ROMs for different regions or a one previous version (I dont recomend this because MI is super against downgrading so they f-up your phone if you try) always with the fastboot one
the scatter should be on ROM/images
if that scatter doesnt work, try the ones I provided, theyre for a different version but hey, in for a pound, if its already hard bricked you may as well try crazy stuff, I would suggest you look for the correct scatters online, but I have some slight experience looking for android files and I couldnt find any that are the correct ones.
Lastly, Im just a nobody that unbricked his device and got a little confident, I know next to nothing about phone config, that said, I do think I know more than most but I dont know if scatter files are completely imposible to be compatible between versions or even the ROMs, most Custom ROM work in both 9a and 9c so I think they might, but IDK.
Ivan.Adriazola said:
did you try Yurian's post info, my phone was totally bricked and thats what kinda worked, I left extensive guides on how I did it on there too
also, here are the files that worked for me (redmi 9a, not the exact same but its pretty similar)
your ROMs should be these (use the fastboot one, to the best of my knoledge, the recovery one only changes the recovery hence, its useles to unbrick) if that doesnt work try ROMs for different regions or a one previous version (I dont recomend this because MI is super against downgrading so they f-up your phone if you try) always with the fastboot one
View attachment 5859871
the scatter should be on ROM/images
if that scatter doesnt work, try the ones I provided, theyre for a different version but hey, in for a pound, if its already hard bricked you may as well try crazy stuff, I would suggest you look for the correct scatters online, but I have some slight experience looking for android files and I couldnt find any that are the correct ones.
Lastly, Im just a nobody that unbricked his device and got a little confident, I know next to nothing about phone config, that said, I do think I know more than most but I dont know if scatter files are completely imposible to be compatible between versions or even the ROMs, most Custom ROM work in both 9a and 9c so I think they might, but IDK.
Click to expand...
Click to collapse
Hello! Thanks so much for replying
I still get the same issue, it just shows a screen for a split secconds and then turns off
if you wan
ax0 said:
Hello! Thanks so much for replying
I still get the same issue, it just shows a screen for a split secconds and then turns off
Click to expand...
Click to collapse
t to some day we could hop on a discord call and see if I can help you in any way, although I doubt it since our hardwares arent exactly the same
Ivan.Adriazola said:
if you wan
t to some day we could hop on a discord call and see if I can help you in any way, although I doubt it since our hardwares arent exactly the same
Click to expand...
Click to collapse
sure my discord is axon#7061
same problem but fixed,try tft free tool.here are the steps.
1.remove battery connection,do not connect untill flashed
2.open tft tool,go to mtk section flash scatter
3.connect mobile while holding both volume bouttons
4.now tft tool starts flashing but failed & rebooting device
5.now remove cable & connect battery,bootup
Hoping this should work for you,mine is fixed that way
brav3h3ar8 said:
same problem but fixed,try tft free tool.here are the steps.
1.remove battery connection,do not connect untill flashed
2.open tft tool,go to mtk section flash scatter
3.connect mobile while holding both volume bouttons
4.now tft tool starts flashing but failed & rebooting device
5.now remove cable & connect battery,bootup
Hoping this should work for you,mine is fixed that way
Click to expand...
Click to collapse
thank you so much
idk why but TFT managed to fix it!
ax0 said:
thank you so much
idk why but TFT managed to fix it!
Click to expand...
Click to collapse
It's my pleasure
ax0 said:
sure my discord is axon#7061
Click to expand...
Click to collapse
Hello, please add me, I'm desperate how to do this :-(
ax0 said:
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
Click to expand...
Click to collapse
Hi,
Just follow the steps and you'll be good.
[Guide] How to unbrick redmi 9C by flashing with SP Tools without Auth file(Tested Working)
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT. If you can boot into Fastboot mode then I would encourage you to flash...
forum.xda-developers.com
I already tried it with my device and it works well.
Hello everyone!
I hope this is seen, because I need your help, well, days ago I wanted to install the pixel experience rom, everything was going well, but when it was installed, I had problems with wifi, and only worked with mobile data (it should be noted that it was Android 13 and my version is merlin). Well, then I decided to change it and return it to stock rom but it has been a tragedy since then. First, I think that being mediatek, the device does not allow to be flashed with mitool, I've tried everything, install twrp but did not serve and now does not let me enter fastboot, what do you recommend? It could be solved (by myself or a technician), or better I give it as dead? I hope your prompt response
estebg_1300 said:
Hello everyone!
I hope this is seen, because I need your help, well, days ago I wanted to install the pixel experience rom, everything was going well, but when it was installed, I had problems with wifi, and only worked with mobile data (it should be noted that it was Android 13 and my version is merlin). Well, then I decided to change it and return it to stock rom but it has been a tragedy since then. First, I think that being mediatek, the device does not allow to be flashed with mitool, I've tried everything, install twrp but did not serve and now does not let me enter fastboot, what do you recommend? It could be solved (by myself or a technician), or better I give it as dead? I hope your prompt response
Click to expand...
Click to collapse
Miflash works with Qualcomm and Media Tek but for the latter it is better to use
https://xiaomitools.com/sp-flash-tool-en/
The problem is that the phone must be in Fastboot mode.
https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/merlin/
TWRP/O.F A11 et A12
Have you tried with the TWRP of:
Wipe/format data type yes
reboot TWRP
flash a recovery rom
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Tajil said:
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Click to expand...
Click to collapse
Bro, do you know what to put in download agent, scatter loading file and authenticator file?, it gives me an error
NOSS8 said:
Miflash works with Qualcomm and Media Tek but for the latter it is better to use
https://xiaomitools.com/sp-flash-tool-en/
The problem is that the phone must be in Fastboot mode.
https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/merlin/
TWRP/O.F A11 et A12
Have you tried with the TWRP of:
Wipe/format data type yes
reboot TWRP
flash a recovery rom
Click to expand...
Click to collapse
And how I can flash the recovery rom if my phone doesnt power on, and xiaomi mi tool doesnt recognize too my phone? I cant enter in fastboot and recovery mode, help me please
estebg_1300 said:
And how I can flash the recovery rom if my phone doesnt power on, and xiaomi mi tool doesnt recognize too my phone? I cant enter in fastboot and recovery mode, help me please
Click to expand...
Click to collapse
In the 1st post you say you have installed the TWRP.
See here
https://forum.xda-developers.com/t/recover-from-hard-brick-no-fastboot-or-recovery.4469431/
https://forum.xda-developers.com/t/...otloop-hard-brick-softbrick-solution.4460191/
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
NOSS8 said:
En la primera publicación dices que tienes instalado el TWRP.
Mira aquí
https://forum.xda-developers.com/t/recover-from-hard-brick-no-fastboot-or-recovery.4469431/
https://forum.xda-developers.com/t/closed-evergo-100-working-poco-m4-pro-5g-redmi-note-11t-india-miui-all-mediatek-devices-bootloop-hard- ladrillo-softbrick-solution.4460191/
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
Click to expand...
Click to collapse
Is there a way that we can talk privately and I can explain better and you can guide me to do the procedure?
estebg_1300 said:
Is there a way that we can talk privately and I can explain better and you can guide me to do the procedure?
Click to expand...
Click to collapse
Sorry but I only have Qualcomm devices.
See with the links above or do some research.
EDIT:
You must install specific drivers to see the phone on the pc.
NOSS8 said:
Sorry but I only have Qualcomm devices.
See with the links above or do some research.
EDIT:
You must install specific drivers to see the phone on the pc.
Click to expand...
Click to collapse
how I do the last that you say?
estebg_1300 said:
how I do the last that you say?
Click to expand...
Click to collapse
I posted some links that might be useful, that's all.
I searched with:
Xiaomi mediatek hard bricked, no fastboot
For example:
https://phonesinnigeria.com/unbrick-hard-bricked-dead-mtk-android-device/
"First connect your phone to your pc, if your pc does not make the sound of usb connection, press the volume key (up or down) on your device till you hear sound on your pc, and also your phone will start vibrating but if it does not vibrate keep on pressing the volume key (up or down) as many times as possible till your phone start vibrating. Then it starts connecting and disconnecting in your pc."
NOSS8 said:
I posted some links that might be useful, that's all.
I searched with:
Xiaomi mediatek hard bricked, no fastboot
For example:
https://phonesinnigeria.com/unbrick-hard-bricked-dead-mtk-android-device/
"First connect your phone to your pc, if your pc does not make the sound of usb connection, press the volume key (up or down) on your device till you hear sound on your pc, and also your phone will start vibrating but if it does not vibrate keep on pressing the volume key (up or down) as many times as possible till your phone start vibrating. Then it starts connecting and disconnecting in your pc."
Click to expand...
Click to collapse
now I get 'the last usb device you connected did not work properly and Windows does not recognize it'.
What should I do now?
estebg_1300 said:
now I get 'the last usb device you connected did not work properly and Windows does not recognize it'.
What should I do now?
Click to expand...
Click to collapse
Maybe change the usb port or install other drivers, but as I told you above, I don't know the tools for MediaTek but it's much easier to restore them for free than the Qualcomm ones.
Do some research on the internet and take the time to fully understand.
NOSS8 said:
Maybe change the usb port or install other drivers, but as I told you above, I don't know the tools for MediaTek but it's much easier to restore them for free than the Qualcomm ones.
Do some research on the internet and take the time to fully understand.
Click to expand...
Click to collapse
and you know anyone that know about mtk and can help me? Thanks btw
estebg_1300 said:
and you know anyone that know about mtk and can help me? Thanks btw
Click to expand...
Click to collapse
See here
https://forum.xda-developers.com/f/redmi-note-9-guides-news-discussion.10961/
Maybe him
VD171
forum.xda-developers.com
download agent (DA), already filled if we use spflash. if not just browse and search inside spflash folder (there 3 to 4 DA file there).
scatter file, you get it from the stock firmware, extract the firmware, check inside the folder. you could directly browser from scatter input to the firmware folder.
auth file, just donload it from the link, extract it and in spflash-- auth file input just browse the file
exactly what I did here, u could do it bro:
Tajil said:
bro, try this one, though it was for redmi 6A.
I think the method there could be tried on other xiaomi phones.
goodluck!
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Click to expand...
Click to collapse
Tajil said:
download agent (DA), already filled if we use spflash. if not just browse and search inside spflash folder (there 3 to 4 DA file there).
scatter file, you get it from the stock firmware, extract the firmware, check inside the folder. you could directly browser from scatter input to the firmware folder.
auth file, just donload it from the link, extract it and in spflash-- auth file input just browse the file
Click to expand...
Click to collapse
Thanks, but read and trying translate to spanish for english, this error appears in every time that i try to put the phone in my pc
Tajil said:
exactly what I did here, u could do it bro:
Click to expand...
Click to collapse
usb device is not recognized
the last device you connected to this computer did not work and Windows does not recognize it.' is what appears in the image I sent you
estebg_1300 said:
usb device is not recognized
the last device you connected to this computer did not work and Windows does not recognize it.' is what appears in the image I sent you
Click to expand...
Click to collapse
it maybe driver issues
try installing some driver needed:
-mtk driver
-libusb-win
-xiaomi usb driver
-vcom driver
-etc ...
Tajil said:
it maybe driver issues
try installing some driver needed:
-mtk driver
-libusb-win
-xiaomi usb driver
-vcom driver
-etc ...
Click to expand...
Click to collapse
now I have this problem...
Hi everyone, days ago I posted on the forum that I had a bootloop, I could not enter fastboot or recovery, well, I managed to install the rom by sp flash tool without errors, but now I get the error "nv data is corrupted" as seen in the video that I attach, anyone know of a viable solution? What is free and do not have any other problem and my phone back to normal? Because I can enter fastboot and maybe download or twrp or download pixel experience or a rom, What do you recommend?