Hi all, recently moved to P40 Pro and followed Bender excellent guide or working GMS. All working well and device (UK unlocked) updated to EMUI 10.1.0.176. However, I cannot update at all, I have searched and tried via phone - including e recovery which says invalid package, using Hi Suite and Hi Suite Proxy which said corrupt package and promptly reformatted (low level) resulting in a reinstall of Googlefier. Please can anyone assist. Many thanks
Dial *#*#2846579#*#*
Will be ProjectMenu on the screen.
Go to 2. Veneer informations \1. Version info, and make screenshot of all infos.
Post the images here.
jamadant said:
Hi all, recently moved to P40 Pro and followed Bender excellent guide or working GMS. All working well and device (UK unlocked) updated to EMUI 10.1.0.176. However, I cannot update at all, I have searched and tried via phone - including e recovery which says invalid package, using Hi Suite and Hi Suite Proxy which said corrupt package and promptly reformatted (low level) resulting in a reinstall of Googlefier. Please can anyone assist. Many thanks
Click to expand...
Click to collapse
Little more digging and use of Hi Suite Proxy updates to EMUI 11 and now updating from device with GMS still working
Related
Hi every one. I can't find solution to my problem so I decided to ask your help.
Few days ago I read that I can update my Huawei p10 to android pie officialy through Hisuite. Scanned for update and it said that I'm on the latest android which was emiui 5.1 so I started to look for a way to force it and found solution (will be posted bellow).
After it Hisuite found pie 9.0.1 update and after downloading the files it started installing it. After that it loaded 100% and rebooted, then rebooted again and again and again... shortly realised that it's bootlooping. Tried to turn it off and yet it kept bootlooping, took it apart disconected battery and hopped to enter recovery mode or fastboot, boot as soon as i plug the battery in and put usb or power on button same thing continued and i can't enter those modes whatever i do. Can anyone help me with this?
Oh yeah, I've tryied this methode on mate 9 pro from 5.1 to 9.1 and it worked flawlessly, then right next after that I attempted p10. Also i think i didn't do anything with firmware finder couse i saw update anyway.
Also on backup photo Details it shows build VTR-L09C432B171 ithat was before me trying to update it
Update methode
"Instructions how to get an authorized version of EMUI 9 on EMUI 9 via Firmware Finder
Attention, this method requires more success checks.
1. Add a line to C:\Windows\System32\drivers\etc\hosts
188.225.84.142 query.hicloud.com
2. Download and install HiSuite9.0.2.304, BUT NOT RUN:
3. Replace the files:
httpcomponent.dll move with the replacement in C:/Program Files (x86)/HiSuite or other directory in which the application is installed HiSuite
HiSuiteConfig.xml move with the replacement in C:/Users/YOURUSERNAME/AppData/Local/Hisuite/userdata/UpdateDogDev
4. Open FF (any, I like the smartphone to register - less action)
Looking for a permitted Android 9 for your device on the principle: device_model: VTR-L29 or VTR-L09,
NOTE: Firmware must be approved for your IMEI
Once again, make sure it is permitted, registers the update for eRecovery.
NOTE: There are two types of firmware: CHN, i.e. for Chinese devices and OVS, for all the rest. So if you do not have Chinese firmware, then you need to pay attention exclusively to OVS.
5. Run HiSuite, connect the device, looking for an update, update, enjoy."
IIm still lost. Is there anything i can do?
Hi all, I'm at my wit's end and would really appreciate any advice.
So I have the p20 pro variant in the title, it's still on EMUI 8.1 and has a lot of bugs. Hicare can't find an update, neither can hisuite.
I tried FF and downloaded a Full-OTA update that was approved for my IMEI. I tried flashing it via Dload method but it reboots to the recovery and says software update failed.
Using the erecovery method with DNS change also does not work as it has some error parsing the update.
The phone works fine otherwise but all these small software niggles are getting to me.
Anyone have any suggestions on how to update this phone to EMUI 9.1? It is not bootloader unlocked.
Thank you for reading this far.
Have you already tried the modified version of hisuite?
Macmoc16 said:
Have you already tried the modified version of hisuite?
Click to expand...
Click to collapse
I have not! Looks like my googlefu is weaker than I thought. Looking into it now and will report back if it works.
So I tried the modified HiSuite method with HStool but I get the error "Your device is not supported". I don't really know where to go from here.
hello,
To install the GMS on my p40 pro +, I tried the downgrade method with Hi-Suite proxy and Hi-suite 10.0.0.510.
I just tried to downgrade my p40 pro + from 10.1.0.156 (c432) to 10.1.0.131 (C432).
Now my phone constantly reboots.
I manage to switch to Recovery but he gives me the message : Get package info failed.
I don't see how to charge my smartphone even if it is with the latest EMUI version.
please help. thank you
try with 10.1.0.144, this should work with p40 pro +
Tunn3l said:
try with 10.1.0.144, this should work with p40 pro +
Click to expand...
Click to collapse
how do you install it without access to HSuite ?
I have the same problem, I can only access to
- Update and recovery system ( got the same error than him )
- Usb update option, don't know how to continue with that.
- Fastboot, but I can also not do much since is "locked"
Thanks for the help!
https://github.com/ProfessorJTJ/HISuite-Proxy/wiki/System-Recovery-Rom-Instruction-(-Soft-Bricked-)
Same problem
joe.cocs said:
hello,
To install the GMS on my p40 pro +, I tried the downgrade method with Hi-Suite proxy and Hi-suite 10.0.0.510.
I just tried to downgrade my p40 pro + from 10.1.0.156 (c432) to 10.1.0.131 (C432).
Now my phone constantly reboots.
I manage to switch to Recovery but he gives me the message : Get package info failed.
I don't see how to charge my smartphone even if it is with the latest EMUI version.
please help. thank you
Click to expand...
Click to collapse
Dear We have the same problem, please help as it reboot we cant flash with Hisutie.... thanks
10.1.0.156 (c432) not suported. Flash this Rom with HiSuite Proxy?
Manuela.k said:
10.1.0.156 (c432) not suported. Flash this Rom with HiSuite Proxy?
Click to expand...
Click to collapse
Thanks but the phone will reboot before Hisuite proxy finishing download so cut the connection...:crying:
Test it with this version of HiSuite
Manuela.k said:
Test it with this version of HiSuite
Click to expand...
Click to collapse
Thanks also 550 510 we try both of them but as it will reboot we cant finish flash
xmarketx said:
Thanks also 550 510 we try both of them but as it will reboot we cant finish flash
Click to expand...
Click to collapse
I have the same issue. Please help :crying: I and desperate what to do or try.
Have you found a solution?
Hello,
ifound a solution
I have a P40 pro Plus with the buid 10.1.0.156 (C432E2R3P3).
I used the following method to downgrade to version 10.1.0.132 :
https://www.youtube.com/watch?v=q2b_lBPc-Hk
and for install GMS:
https://www.youtube.com/watch?v=2Lcq...ature=youtu.be
The only downside is that it is not possible to update the version afterwards, but it works while waiting for a possible commercial release from the USA.
P40 pro 10.1.0.158 (636E8R4P1) how to downgrade
What method should I use to downgrade? Hisuite
Can't help me downgrade.
Cell phones don't have GMS just like they're gone.
accidently installed wrong version of OS even Firmware Finder approved it for installation, now my mobile reboots after every 20 seconds ....
any solution ????
we messed with our motherboard by installing wrong OS via Hisuit proxy ...
only solution is to take your mobile to Huawei Service center for mainboard replacement.. it will be free under warranty
Sorry to say but You have to go to Huawei service center and they need to replace the moterboard , this is the only way to get phone working. If You flashed wrong firmware you damaged IMEI and security certificates so no way that flashing good firmware will work now .
I had the same problem. No IMEI and constant reboots. I have sent the phone to Huawei for repair and they said they have to replace the main board. Yesterday I contacted the guy from the first reply in this thread https://forum.xda-developers.com/t/huawei-p40-pro-soft-brick-reboot-only.4166553/
He really managed to repair the phone and it is working normally now. It took about 2 hours and he charged 40usd. So I can definetly recommend him as I would have to throw away the phone otherwise.
any one can post preload and cust file for p40 pro c636 regions, i can find any on the internet.
or anyone can help me unbricked my phone
thank you
kellogsvibrant said:
any one can post preload and cust file for p40 pro c636 regions, i can find any on the internet.
or anyone can help me unbricked my phone
thank you
Click to expand...
Click to collapse
It is better to provide the all story and many, many details. From what EMUI version was on the phone, what methods you used till the current situation. There are so many variables.
sorry, im was on emui 12, then i really need gms to work, reverted back to emui 10, and iupdated to emui 12 using flashdrive trick, i DL wrong firmwaree i guess, then it got bricked stuck on erecovery mode. after i flashed using usb
kellogsvibrant said:
sorry, im was on emui 12, then i really need gms to work, reverted back to emui 10, and iupdated to emui 12 using flashdrive trick, i DL wrong firmwaree i guess, then it got bricked stuck on erecovery mode. after i flashed using usb
Click to expand...
Click to collapse
Write for every step what firmware, files have been used.
I updated my huawei to beta emui12, i got in ang got the OTA for emui 12, but i really need GMS now, then i used hisuite proxy downgraded my p40 pro to emui 10, but cant remmeber exact number, it was success then my pc wont detect my huawei, lastly i tries using the usb otg OTA update. the after restart i get this error
any one can link me full firmware files for this region , il gladly appriciate.
kellogsvibrant said:
any one can link me full firmware files for this region , il gladly appriciate.
Click to expand...
Click to collapse
It is not so easy as you think it is.
In my opinion it is better to go to the service.
It is a slightly chance to fix with HarmonyTP cable + HiSuite Proxy (Recovery OS).
Looking at your questions and answers, you have no idea about how the things works with this phone.
You can try to ask here too:
HISuite Proxy ( Huawei Phones' Updater & Soft-Brick Fixer )
Introduction Simply this application reverse engineers ( modifies ) HISuite, to be able to manipulate its Huawei servers' response data for installing official roms of Huawei, customarily. Features Support for OTA ROMs Support for FullOTA ROMs...
forum.xda-developers.com
or on telegram group here:
Huawei Firm Finder / HiSuite Proxy Support
https://professorjtj.github.io
t.me
I already sent a private message to a Recognized Contributor on XDA.I think that If post here I could help also other members.
I have problem with my new huawei p30 pro.It was stuck on android 9 and emui 9 ,I tried every official modes to force the update.But I couldn't achieve that.
So I tried with hisuite proxy .I finded my Device model(VOG-L29) region: C431-HW-EEA , then clicked on add rom on firm Finder v2 .The version was the lastest 102.0.0.134
The procedure was smooth and I choosed the right ROM (100% sure!I already have that webpage open)Once finished the smartphone installed the EMUI 12 but once restarted the massage: Your device has loaded a different operating system! scared me .
Do I broke the phone? Is there a way to fix it without changing the motherboard?
Thanks a lot every help will be appreciated so much
Little Update.
I tried several methods trying solving this big issue.
1.Update from Erecovery trying to download and recover the package via WIFI
RESULT:the phone updated from 12.0.0.134 to 12.0.0.149 but once rebooted the
same result with black screen and the massage: Your device has loaded a different operating system
2.I done the same procedure of this guy
I also saved the log file of hisuite and here are the version before I made that mess:
* FirmWare_Base:VOG-LGRP2-OVS 9.1.0.240
* FirmWare_Cust:VOG-L29-CUST 9.1.0.4(C431)
* FirmWare_Preload:VOG-L29-PRELOAD 9.1.0.2(C431R2)
So The ROM I selected on huawei firm finder v2 was good(VOG-l29 102.0.0.134)
I succeeded to Recover and install the previous ROM,the 9.1.240,with hisuite and hisuite proxy
but once finished an error on the p30pro appear: Software install failed.
tried also the 10.0.0.195
I'm thinking about dload with otg or nm card but I don't know the procedure.
Could you guys help me?
Thanks
As the title changed I solved the problem of soft brick.
I write here the tutorial to help those who might have the same problem.
Requirement :OTG cable ,exFat formatted pen drive and the right Firmware to flash.
Create a dload called folder inside the pen drive and put in it the 3 Firmware's .zip file(base,cust and preload)
I specify that my p30 was bricked on version 12, so my first attempt was to load the version
VOG-L29 hw eea VOGUE-L29C 9.1.0.115(C431E4R2P2).
To flash the firmaware from usb pen take the phone off and hold the volume up button for several seconds while we connect to charge the phone .Connect the usb pen and from erecovery choose OTG update mode.
The result was an unbricked p30 pro but no fast charge and usb data tranfer and I can't get any type of update from OTA.
So I downloaded this version:
https://huaweidownload.com/download/p30-pro/vog-l29-2/10-1-0-123/
I flashed my P30 Pro once again, and of course no USB connection and fast charging. But system afetr few minutes started finding upgrades via OTA. Passed from 10.1.0.179 to 10.1.0.201. Of course I let it upgrade.
It was 11.0.0.138 first, then 11.0.0.174(last EMUI version before version 12 ) came and USB connection was restored.
you can also find other firmware here:
https://androidhost.ru/search.html
https://www.hardreset.info/it/devices/huawei/huawei-p30-pro/faq/firmware/huawei-firmware/
Even if I am a programmer I am new in the world of android bricks and I spent 2 afternoons and many attempts to solve the problem.
The last problem concerns the creation of a backup point. I have tried different version of HiSuite and both windows 10 and 8.1.But I couldn't get data from phone
The solution is to install the Androis ADB inteface Drivers while the phone is connected to the PC. I believe that this way data information is injected to the phone as well as installed on the PC.
take the drivers from here: https://oemdrivers.com/usb-adb-interface
or here: https://www.drivermarket.net/adb-fastboot-drivers-v1-4-3-download-for-windows-latest/
once you carry out this procedure you fixed everything