Hello,
I don't consider myself an expert but not even a beginner, I tried to install the global developer on the mi9 as on mix2s, mix 2, redmi note 6 pro etc ... But as you already know from Mi9 and also with Redmi note 7 they introduced the rom EEA.
So to install the global you need to unlock the bootloader. I unlocked it and tried to install the developer first with Mi tool, but it started in fastboot and from there I couldn't install anything with Mi flash. I had to install the EEA again.
I tried to install the global stable directly with Mi flash, but it gave me an error again.
I tried to install the TWRP, it worked, but I didn't trust installing the developer without a wipe and then on reboot it started again in fastboot and I had to reluctantly go back to EEA with Mi flash.
Now I would like to know if there is a precise procedure for flashing the global developer on a Mi9 with the EEA. Thanks in advance for the help
Mi 9T Pro 64 GB Global (MIUI Global 11.0.1 QFKMIXM) with Bootloader Unlocked
I keep running into issue when I install a ROM where one of two things happens every time I try...
I lose TWRP and the system boots directly to Fastboot (seems to happen with MiUI based roms)
I can re-push TWRP via ADB/FastbootTrying to flash any ROMs at this point will result in Error 7 (phone is wrong model)I cannot seem to figure out why or what to do about it. Going back to stock with MiFlash is the only thing I can get to work
I keep TWRP and the system either boot loops or boot directly to TWRP (happens with AOSP Roms)
When this happens it also scrambles sdcard and gives Unable to Wipe FBE Drive when trying to wipeThe only solution I've found to recover is use MiFlash to return to stock and then go through the unlock process again.
I have been trying to follow the ROM dev instructions, which tend to all go somewhat like:
Reboot to TWRP
Wipe Data & Cache/Dalvik (and sometimes System when AOSP)
Flash MIUI 11 vendor/firmware for your device variant (I am guessing this is where I am screwing up, but not sure how...I have also tried starting fulling stock w/OTA updates to see if it helps)
Flash the ROM
Reboot to System
I think this may be an issue of missing something simple, like the wrong FW/Vendor files, but I cannot figure it out exactly what I should be doing.
My goal is to try EvoX and LinageOS; however, at this point I have tried several others and would be happy if I could get any non-factory version working.
Mi device Mi 9T pro . After Flashing Rom my devices is bricked, not turned on. how can i solve this problem .
N.B Unfortunately i Flashed my device with Mi 9T rom.
Hello.
I have a question. How to install MIUI 12 without losing TWRP. The thing is, my Mi 9T Pro is damaged and my computer can't see it (probably the motherboard is damaged). I would like to install Miui but I know that after Miui Rom flash it changes to TWRP on Recovery XIAOMI. I would like to prevent this because if I download Recovery XIAOMI, I will never be able to upload any other ROM. Do you have any suggestions on how to do it?
kempes221 said:
Hello.
I have a question. How to install MIUI 12 without losing TWRP. The thing is, my Mi 9T Pro is damaged and my computer can't see it (probably the motherboard is damaged). I would like to install Miui but I know that after Miui Rom flash it changes to TWRP on Recovery XIAOMI. I would like to prevent this because if I download Recovery XIAOMI, I will never be able to upload any other ROM. Do you have any suggestions on how to do it?
Click to expand...
Click to collapse
It was asked/answered in other threads. After flashing the stock ROM from TWRP, reboot to Recovery/TWRP (not to system) and follow the posts #933, #935-#937:
https://forum.xda-developers.com/showpost.php?p=82945031&postcount=936
You may try backup recovery>flash rom>restore recovery>boot
Mi 9T Pro ll Tapatalk
Hi All, it's time i clean up my K20 Pro as i have upgraded to a F2 Pro.
The K20 Pro has MIUI 10.3.17 CN ROM from about 10 months ago, bootloader unlocked, magisk etc.
When trying to miflash it with a MIUI 12.0.5 CN latest fastboot rom in order to get back to factory, the progress bar completes in 1 second, and status is green and success, BUT the phone does not reboot itself. Using miflash 20181115 with clean all option.
After i unplug phone and reboot it manually nothing was flashed - everything is still on there.
Any ideas?
Thought i would try doing factory reset from within the system and at first it appeared to be going thru the reset - however upon reboot, everything remains.
The other things is i have TWRP on it, wondering if i should do anything there?
Looking for assistance on what the correct procedure is...
hippo2s said:
Hi All, it's time i clean up my K20 Pro as i have upgraded to a F2 Pro.
The K20 Pro has MIUI 10.3.17 CN ROM from about 10 months ago, bootloader unlocked, magisk etc.
When trying to miflash it with a MIUI 12.0.5 CN latest fastboot rom in order to get back to factory, the progress bar completes in 1 second, and status is green and success, BUT the phone does not reboot itself. Using miflash 20181115 with clean all option.
After i unplug phone and reboot it manually nothing was flashed - everything is still on there.
Any ideas?
Click to expand...
Click to collapse
Have u tried flashing without mi flash tool.
That might work or maybe use newer version of mi flash tool
Ezio553 said:
Have u tried flashing without mi flash tool.
That might work or maybe use newer version of mi flash tool
Click to expand...
Click to collapse
Hi, how can one flash without miflash? and the miflash no believe is the last version I think.
Would prefer a miflash completely to get rid of TWRP too.
any other ideas why this is happening?
hippo2s said:
Would prefer a miflash completely to get rid of TWRP too.
any other ideas why this is happening?
Click to expand...
Click to collapse
Xiaomi Flash Tool - Official Mi Flash Tool
Download the latest and Official Xiaomi Flash Tool from the Official Xiaomi Flash Tool Website.
xiaomiflashtool.com
try downloading latest flash tool from this website
if not then try flashing without flash tool and u will not be able to retain twrp if u flash fastboot rom by any means.
if flash tool doesn't work then just extract the zip i have attached here and paste all files of fastboot rom folder in this folder and run the flash_all.bat file and it should work if u have all drivers installed.
The newer miflash worked! thank you so much Ezio!
Would you happen to know if there is any way to get Google PlayStore onto a K20 Pro?
I saw some threads on 'just flash it with a global ROM' - which wasn't the case back a year ago when i had last tinkered.
hippo2s said:
The newer miflash worked! thank you so much Ezio!
Would you happen to know if there is any way to get Google PlayStore onto a K20 Pro?
I saw some threads on 'just flash it with a global ROM' - which wasn't the case back a year ago when i had last tinkered.
Click to expand...
Click to collapse
yes i have an Indian k20 pro and i tried miui global rom it works fine except nfc didn't as Indian k20 pro doesn't have nfc hardware.
So yes u can do that if u want but do note that global rom has dialer and contact as well from google and not mi one.
I remember when I treid it a year ago it didn't work. The phone recognise the rom as for non-chinese and said the version was wrong. Are you sure?
Is the process same as fastboot flashing?
Guess of it doesn't work I should be able to fastboot flash it back again?
Thanks, I just found https://www.google.com/url?sa=t&sou...Vaw1k6QstZklCOzbLJO2p_18T&cshid=1607339448068
I just have to remember not to lock the bootloader.
Hi.
It's been a while since I flashed some ROM's so I am out of the loop a bit.
I just bought a Mi 8 SE off ebay. The ROM is the so called fake ROM MIUI GLOBAL 9.5.8.0 (Android 8.1). I intended to flash a new ROM and to my surprise it already contains a custom TWRP recovery. The TWRP is version 3.2.3 1102. Is this a really old one? Should I reflash the latest TWRP from TWRP.me or can I use this old TWRP to flash?
What I want to do is flash Xiaomi.eu MIUI 11 20.3.26 (Android 10). Do I need to format DATA in TWRP and then transfer the Xiaomi.eu ROM to the phone when I try and flash? Do I need any GAPPS when I flash Xiaomi.eu ROMs?
One more thing. Out of interest how would I go about flashing the last stock Chinese ROM for the MI 8 SE? Would I use MiFlash tool?
Any tips would be gratefully received.