No OEM Unlock Option - Samsung Galaxy A71 Questions & Answers

Hello all, I have an A71 model # SM-A715W running Android 10 and one UI 2.0. I have tried for hours to get the oem unlock option to show up in developer options, but that option never shows. I tried multiple methods such as rolling back the time, disabling auto updates, checking for updates, and rebooted multiple times. Any help would be appreciated.

This issue has been solved. Unfortunately, the solution is not paid. https://forum.xda-developers.com/t/...unlock-for-samsung-us-canada-devices.4215101/

hi, there are a few minor patches but the situation could be worse. because most of the patches are coded by chinese. I do not recommend...

Related

Force Enable Internet Connection Sharing

Hey, everyone.
I just bought an ATT Samsung Focus S i937 off of eBay. It was locked when I received it, so I plunked down 25 bucks and unlocked it. I'm using it on Telus and so far all is well, except for WiFi connection sharing/tethering.
When I try to enable internet sharing, I get a message saying "Connection not shared. To enable tethering on this device go to (ATT's website) or dial 611."
Basically, it sounds like I need to have an ATT tethering plan to enable this on my phone, but since I'm not an ATT customer, there's not mch I can do.
I was wondering if there is a workaround for this. Please let me know!
Thanks,
Taylor
TaylorofCanada said:
Hey, everyone.
I just bought an ATT Samsung Focus S i937 off of eBay. It was locked when I received it, so I plunked down 25 bucks and unlocked it. I'm using it on Telus and so far all is well, except for WiFi connection sharing/tethering.
When I try to enable internet sharing, I get a message saying "Connection not shared. To enable tethering on this device go to (ATT's website) or dial 611."
Basically, it sounds like I need to have an ATT tethering plan to enable this on my phone, but since I'm not an ATT customer, there's not mch I can do.
I was wondering if there is a workaround for this. Please let me know!
Thanks,
Taylor
Click to expand...
Click to collapse
firstly DO NOT INSTALL THE SAMSUNG UPDATE!! and if updating the OSan have it unlocked already read This Website and use the relock prevent + edit your hosts file
Absolutely back up your device at every stage using This Guide
So follow these steps
unlock the device Here follow the instructions which includes installing the diagnostic tool and install XAP deployer or XAP handler Here or Here With the XAP file deployer in the WP7 SDK
Then install WP7 Root Tools Here
Then install WP Bazaar market Here
Open Root Tools, and give Bazaar higher level privileges
Find WinTT on the Bazaar market and install it
Open Root Tools, and give WinTT higher level privileges
you may need to restart to get WinTT working
go through WinTT and turn on ICS
Done
Wow thanks.
That's very complete. One questions though... I didn't mention this, but I am a registered WP7 dev and can unlock this device using my dev access. Can I load any of the XAPs directly instead of having to crack my phone?
Thanks,
Taylor
Yeah, you have limited access to installing xaps, but you will still need to interop unlock and use root tools to give higher level access to WinTT, so your best starting from scratch,
Sent from my SGH-i937 using XDA Windows Phone 7 App
Unable to understand the process
I have purchased an Samsung Focus S i937 locked to AT&T. I have purchased an unlock code and have successfully unlocked my phone. Im also unable to use the Internet Sharing feature of my phone. Firstly, I am not a technical guy hence im unable to understand the process stated by you. Secondly, I wanted to find out that does following the process given by you, expose my device to get BRICKED as I am able to understand that involved a JAIL BREAK of the device. Does it have any other side effects.? Like effecting the radio signals or any other such problem.
Thanks
abhijeetmohan06 said:
I have purchased an Samsung Focus S i937 locked to AT&T. I have purchased an unlock code and have successfully unlocked my phone. Im also unable to use the Internet Sharing feature of my phone. Firstly, I am not a technical guy hence im unable to understand the process stated by you. Secondly, I wanted to find out that does following the process given by you, expose my device to get BRICKED as I am able to understand that involved a JAIL BREAK of the device. Does it have any other side effects.? Like effecting the radio signals or any other such problem.
Thanks
Click to expand...
Click to collapse
ok, first things first.
You won't brick your device, at worst a hardrest all remove all changes you can do, our device, the focus S, isn't fully unlocked, so there are limitations to the amount of damage you can do by arseing it up. With that behind us you have to learn what you are about to do, there isn't a simple way.
So, start by knowing these basics, then read through the guide, any bits you don't understand feel free to ask.
1, AT&T locked your internet connection sharing, so you must re enable that
2, To enable ICS, you must make changes to the registry
3, Microsoft locked you out of making changes to the registry, so you must gain access to do it
4, AT&T left a security hole allowing us to make changes to allow us to change things like registry
5, using that hole we can install software that will give us more access, that software can then allow us to remove the AT&T lock on ics
These things you must do, there is no magic answer, there has been some short cuts made but this in some cases has had a negative effect, such as losing 3g, doing as I said will not have any effect on your signal or anything else
Sent from my Samsung Focus S using XDA Windows Phone 7 App
Have you guys noticed any of the following....
issues after the above procedures were applied (a big thanks to all the brainiacs who know how to hack this stuff):
Slowed Internet Connection
Lower Strength of GPS Signal
Less accuracy and trouble sometime finding location
Less accuracy while using maps because of the above statement
Not complaining, just curious. Thanks to all.:good:
7carisfast said:
issues after the above procedures were applied (a big thanks to all the brainiacs who know how to hack this stuff):
Slowed Internet Connection
Lower Strength of GPS Signal
Less accuracy and trouble sometime finding location
Less accuracy while using maps because of the above statement
Not complaining, just curious. Thanks to all.:good:
Click to expand...
Click to collapse
theres nothing in the code that should have done that, the XML import only fiddles with interop unlock
im not 100% sure what WTT changes but I know the entries it should be fiddling with and shouldnt make any difference, although its been suggested the ICS code does mess with the 3G signal ive not heard anything at all to suggest that it effects GPS as well.
See This Thread for details, ive copied the relevant bits here but all thanks should go to those on the original thread
Option 1
---- 11.3. If your device is not locked to a specific operator, you can use the Samsung Network Profile app (for 1st generation) or Wireless Manager (for 2nd generation)
-------- 11.3.1. Uninstall the Samsung Network Profile / Wireless Manager app.
-------- 11.3.2. Download and install the latest version of the Samsung Network Profile / Wireless Manager app from the Marketplace.
-------- 11.3.3. Open the Samsung Network Profile / Wireless Manager app.
-------- 11.3.4. Select a different Network Operator.
-------- 11.3.5. Now Select your own Network Operator again.
-------- 11.3.6. Exit the Network Profile / Wireless Manager app.
Option 2
Resolve Samsung connection problems
A lot of Samsung owners have complained here about connection problems. They blamed Interop Unlock, but apparently this has more to do with enabling "Internet Connection Sharing" than with "Interop Unlock". You should be able to recover the connection, apply this:
1. Start Diagnosis App> *#32489# ***DOES NOT WORK ON i937***
2. Tap "Back" 2 times to go back to Phone Control
3. Choose: [7] Network Control
4. Choose: [1] GFC
5. Choose: [3] Setting Cancellation
Wait for it to say success, then reboot.
GPS is a completely passive function, I don't have a problem with this, HSDPA may have issues for reasons unknown but using this method doesn't effect mine, perhaps its carrier specific..
dazza9075 said:
theres nothing in the code that should have done that, the XML import only fiddles with interop unlock
im not 100% sure what WTT changes but I know the entries it should be fiddling with and shouldnt make any difference, although its been suggested the ICS code does mess with the 3G signal ive not heard anything at all to suggest that it effects GPS as well.
See This Thread for details, ive copied the relevant bits here but all thanks should go to those on the original thread
Option 1
---- 11.3. If your device is not locked to a specific operator, you can use the Samsung Network Profile app (for 1st generation) or Wireless Manager (for 2nd generation)
-------- 11.3.1. Uninstall the Samsung Network Profile / Wireless Manager app.
-------- 11.3.2. Download and install the latest version of the Samsung Network Profile / Wireless Manager app from the Marketplace.
-------- 11.3.3. Open the Samsung Network Profile / Wireless Manager app.
-------- 11.3.4. Select a different Network Operator.
-------- 11.3.5. Now Select your own Network Operator again.
-------- 11.3.6. Exit the Network Profile / Wireless Manager app.
Option 2
Resolve Samsung connection problems
A lot of Samsung owners have complained here about connection problems. They blamed Interop Unlock, but apparently this has more to do with enabling "Internet Connection Sharing" than with "Interop Unlock". You should be able to recover the connection, apply this:
1. Start Diagnosis App> *#32489#
2. Tap "Back" 2 times to go back to Phone Control
3. Choose: [7] Network Control
4. Choose: [1] GFC
5. Choose: [3] Setting Cancellation
Wait for it to say success, then reboot.
GPS is a completely passive function, I don't have a problem with this, HSDPA may have issues for reasons unknown but using this method doesn't effect mine, perhaps its carrier specific..
Click to expand...
Click to collapse
Thanks for the info. I'll see if it helps. Just as FYI, the code *#32489# does not appear to work on the i937.
7carisfast said:
Thanks for the info. I'll see if it helps. Just as FYI, the code *#32489# does not appear to work on the i937.
Click to expand...
Click to collapse
indeed, so it would seem, many of the diagnostic codes have been disabled which is a pain, even the ones that are left don't always do what you expect them to do
8773 update
dazza9075 said:
firstly DO NOT INSTALL THE SAMSUNG UPDATE!! and if updating the OSan have it unlocked already read This Website and use the relock prevent + edit your hosts file
Absolutely back up your device at every stage using This Guide
So follow these steps
unlock the device Here follow the instructions which includes installing the diagnostic tool and install XAP deployer or XAP handler Here or Here With the XAP file deployer in the WP7 SDK
Then install WP7 Root Tools Here
Then install WP Bazaar market Here
Open Root Tools, and give Bazaar higher level privileges
Find WinTT on the Bazaar market and install it
Open Root Tools, and give WinTT higher level privileges
you may need to restart to get WinTT working
go through WinTT and turn on ICS
Done
Click to expand...
Click to collapse
What if I have already updated to version 7.10.8773.98, is there any other possible way? I don't need any other features. Thanks in advance.
If you have updated the OS and NOT the samsung firmware then reapply the windows break interop unlock, be sure to keep it off the inernet by disabling all coms and then apply the relock prevent xap. if you have applied the Samsung firmware and didn't have it already unlocked or you didn't have a back up, your screwed
Sent from my Samsung Focus S using XDA Windows Phone 7 App
dazza9075 said:
If you have updated the OS and NOT the samsung firmware then reapply the windows break interop unlock, be sure to keep it off the inernet by disabling all coms and then apply the relock prevent xap. if you have applied the Samsung firmware and didn't have it already unlocked or you didn't have a back up, your screwed
Sent from my Samsung Focus S using XDA Windows Phone 7 App
Click to expand...
Click to collapse
First of all I just want to say thanks that you're trying to help me, but I just didn't understand many things u said, I'm not really into technical stuff, but I'll tell you what info I have, in hope of u helping me better.
I don't live in the US and I bought the phone from ebay and it was unlocked and it works perfectly over 2 carriers here in my country, and I have never encountered any problems with it except for the internet sharing feature.
And about 3 months ago the phone notified my to a system upgrade from version 7.10.7740 to version 7.10.8107 then immediatly to version 7.10.8773.98. now I'm guessing these are OS firmwares not samsung software.
but I've noticed something, when I setup my phone for the first time I used a US hotmail account but before I connect to the internet the ICS feature worked, but once I signed in it gave me the dial 611 or go to att.com/mywireless message.
So I am guessing if I restore the device and sign in with a non US hotmail account may result in the feature to be unlocked. The only thing keeping me from trying this because I'll have to redownload all my apps again and reorganize my contacts again. if there's a way to avoid that or someone has tried it please do tell.
Again thanks for your reply.
kholio88 said:
First of all I just want to say thanks that you're trying to help me, but I just didn't understand many things u said, I'm not really into technical stuff, but I'll tell you what info I have, in hope of u helping me better.
I don't live in the US and I bought the phone from ebay and it was unlocked and it works perfectly over 2 carriers here in my country, and I have never encountered any problems with it except for the internet sharing feature.
And about 3 months ago the phone notified my to a system upgrade from version 7.10.7740 to version 7.10.8107 then immediatly to version 7.10.8773.98. now I'm guessing these are OS firmwares not samsung software.
but I've noticed something, when I setup my phone for the first time I used a US hotmail account but before I connect to the internet the ICS feature worked, but once I signed in it gave me the dial 611 or go to att.com/mywireless message.
So I am guessing if I restore the device and sign in with a non US hotmail account may result in the feature to be unlocked. The only thing keeping me from trying this because I'll have to redownload all my apps again and reorganize my contacts again. if there's a way to avoid that or someone has tried it please do tell.
Again thanks for your reply.
Click to expand...
Click to collapse
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Samsung Firware Update
dazza9075 said:
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Click to expand...
Click to collapse
Dazza,
Kudos for your help as you personally worked with me through this information. Not sure the Samsung update is a concern as I'm running fw2103.11.10.1 and everything works great.
Thanks again.
dazza9075 said:
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Click to expand...
Click to collapse
OS version: 7.10.8773.98
Firmware version: 2103.12.05.2
kholio88 said:
OS version: 7.10.8773.98
Firmware version: 2103.12.05.2
Click to expand...
Click to collapse
im afraid to say your firmware is locked,
2103.11.10.1 is unlock-able, im pretty sure anything from xxxx.12.xx.x upwards is locked down solid
I don't suppose you made a backup? if you haven't then there is nothing you can do
the Samsung firmware update was released as a separate update at the same time as the tango 8773 build, it tried to install on mine after the 8773 build
Found a solution =D
dazza9075 said:
im afraid to say your firmware is locked,
2103.11.10.1 is unlock-able, im pretty sure anything from xxxx.12.xx.x upwards is locked down solid
I don't suppose you made a backup? if you haven't then there is nothing you can do
the Samsung firmware update was released as a separate update at the same time as the tango 8773 build, it tried to install on mine after the 8773 build
Click to expand...
Click to collapse
I'm really sorry for the late reply, was busy at work. but during that time I might have found a "Glitch" or a workaround to enable it and I have tested it many times and it works.
Well there are two ways:
1st one which is a sure thing:
1) Turn off the phone, then turn on again.
2) Once the phone is turned on, immediately go to settings>internet sharing and turn it on and BOOM there you go :laugh:
* I have tried this method over a dozen times and it works every single time
** The point here is that you have to enable it immediately after the phone is turned on, I think it happens because the phone doesn't have enough time to send the info. to the servers to know that it's not enabled by default.
2nd one which was succesful over 75% of the time:
1) Go to Settings>cellular>Turn Off, Wait like 5-10 seconds and turn on again.
2) Go to Internet sharing> Turn on, and enjoy :fingers-crossed:
***I don't know why do they work or how, may be it's a Glitch like I said before but the point is they do work
I hope that I've helped someone out there and Thanks to everyone who tried to help me
kholio88 said:
I'm really sorry for the late reply, was busy at work. but during that time I might have found a "Glitch" or a workaround to enable it and I have tested it many times and it works.
Well there are two ways:
1st one which is a sure thing:
1) Turn off the phone, then turn on again.
2) Once the phone is turned on, immediately go to settings>internet sharing and turn it on and BOOM there you go :laugh:
* I have tried this method over a dozen times and it works every single time
** The point here is that you have to enable it immediately after the phone is turned on, I think it happens because the phone doesn't have enough time to send the info. to the servers to know that it's not enabled by default.
2nd one which was succesful over 75% of the time:
1) Go to Settings>cellular>Turn Off, Wait like 5-10 seconds and turn on again.
2) Go to Internet sharing> Turn on, and enjoy :fingers-crossed:
***I don't know why do they work or how, may be it's a Glitch like I said before but the point is they do work
I hope that I've helped someone out there and Thanks to everyone who tried to help me
Click to expand...
Click to collapse
nice find, ICS is disabled locally only, it doesn't have anything to send, the only thing I can think of that makes sense is that the service hasn't been initialised and doesn't call the reg entries that disables ICS, by turning it on manually ASAP it perhaps catches it out. if you enable it, then disable it, can you still enable it again in that session or do you need to restart?
dazza9075 said:
nice find, ICS is disabled locally only, it doesn't have anything to send, the only thing I can think of that makes sense is that the service hasn't been initialised and doesn't call the reg entries that disables ICS, by turning it on manually ASAP it perhaps catches it out. if you enable it, then disable it, can you still enable it again in that session or do you need to restart?
Click to expand...
Click to collapse
Well I tried that, but there is no definite answer to it, sometimes I turn it on and off on and off many times without needing to restart and throughout the whole day, and sometimes it works once and doesn't at the second try. So it all comes down to luck, but still better than nothing
Now the thing is I'm afraid that when the 7.8 update comes, they would fix this glitch =D Haha.

[Q]

Hello there people of XDA, I am glad I've found a place where I might find the answer for the problem I have been facing with nowadays.
I am using LG P880 Optimus 4xHD, but I haven't done any Android OS upgrades, I bought it at May 2013 so I think it still has the Ice cream sandwich system. Anyways, I had somehow forgot my screen lock pattern and tried to unlock it unsuccessfully 15 times, and my phone was locked. I couldn't confirm my Google account details as Wifi and mobile data were turned off. I hadn't have enabled USB debugging by then, also I don't have CWM recovery mode and so on. What can I say, I was just a simple user. But right now, I don't want to lose all the data I had stored inside. It used to work as MTP device but as it is locked right now I can't even access my files in it. I found some programs and guides about how to unlock this pattern lock but not for my device, instead Nexus devices and so on. I am so lost about this, all the guides and videos I have found either require USB debugging enabled, or a Samsung/Nexus/HTC device :/ I really hope you guys know how can I can solve this before taking it to another Tech service. I have tried 2 of them but they were simply unqualified and never heard of any process people mention about here, they just wipe all the data and give the phones back to customers.
Have a nice day everyone
Since you are probably on ICS, there is almost no chance you can unlock it in the situation you described.
katilemre said:
Hello there people of XDA, I am glad I've found a place where I might find the answer for the problem I have been facing with nowadays.
I am using LG P880 Optimus 4xHD, but I haven't done any Android OS upgrades, I bought it at May 2013 so I think it still has the Ice cream sandwich system. Anyways, I had somehow forgot my screen lock pattern and tried to unlock it unsuccessfully 15 times, and my phone was locked. I couldn't confirm my Google account details as Wifi and mobile data were turned off. I hadn't have enabled USB debugging by then, also I don't have CWM recovery mode and so on. What can I say, I was just a simple user. But right now, I don't want to lose all the data I had stored inside. It used to work as MTP device but as it is locked right now I can't even access my files in it. I found some programs and guides about how to unlock this pattern lock but not for my device, instead Nexus devices and so on. I am so lost about this, all the guides and videos I have found either require USB debugging enabled, or a Samsung/Nexus/HTC device :/ I really hope you guys know how can I can solve this before taking it to another Tech service. I have tried 2 of them but they were simply unqualified and never heard of any process people mention about here, they just wipe all the data and give the phones back to customers.
Have a nice day everyone
Click to expand...
Click to collapse
I don't think that you have any chance to get your data. sorry
None of the services can do that, so you can reset phone by yourself to save money and time

Microsoft is shutting down WP8.1 Store. How can we unlock our phones now?

As you know, the WP8.1 Store will be closed December 16 2019, and we will no longer be able to download apps.
For some time the Store has been a mess and people are already unable to download apps. Yes, even before the closing date.
The question is: How can we unlock our phones now?
The unlocking methods relies on downloading apps from the Store, like "Preview for Developers", "MixRadio", "HERE Maps" and File Managers.
People who didn't unlock their phones are hopeless? The ones that did unlock and need to reflash the .ffu are hopeless too?
EDIT: Just read about Windows Phone Internals, but some devices are missing in the supported list, including mine.
EDIT2: Some roms have MixRadio installed by default, so it is possible to easily unlock them.
Also downloaded Windows Phone Internals, and to my surprise, my phone is in the supported list (inside the software), although it is not listed at the site.
EDIT3: I got too focused on having the required apps available from the store that I forgot the most important part/tool to unlock the phone: The Windows Phone Developer Registration 8.1 tool. Unfortunately the last time I tried to unlock my phone (some days ago) I wasn't able to, and received an error.
Going by comments, other people have the same issue.
Hi,
Please, Microsoft store for WPhone with W8.1 does not work last days, one month before 16.12.2019! Why? Now, on my Lumia 630 Store does not work! Does it work with you? Thank you.
Nope.
Schuger13 said:
Hi,
Please, Microsoft store for WPhone with W8.1 does not work last days, one month before 16.12.2019! Why? Now, on my Lumia 630 Store does not work! Does it work with you? Thank you.
Click to expand...
Click to collapse
It is not working for a lot of people.
I'm afraid at this point they might not have any incentive to fix this. They can wait until the store closes in one month and forget about it.
I did a reset to the phone (Lumia 1020) and now I'm stuck without anything and with 0000 updates!! error c101a006 since Tuesday!!
if they won't fix the store, is there any way to build WP8.1 Denim CFW with all the stuff I need pre-installed, like I did with Symbian ? I DON'T KNOW WHAT TO DO!! HELP!!!!!!!
CAn update to wm10?
augustinionut said:
CAn update to wm10?
Click to expand...
Click to collapse
I can't. My phone is not supported.
I would guess that the majority having this issues are using devices that cannot be upgraded to Windows 10.
Dfein said:
I can't. My phone is not supported.
I would guess that the majority having this issues are using devices that cannot be upgraded to Windows 10.
Click to expand...
Click to collapse
any model includes mine, can be upgraded to WP10 with some tricks and teaks, but read this why NOT:
21407_10_reasons_to_keep_your_Lumia_.php < throw it on google
Developer unlock via Windows Phone SDK Lite not working now ... strangely
Dfein said:
…
The question is: How can we unlock our phones now?
The unlocking methods relies on downloading apps from the Store, like "Preview for Developers", "MixRadio", "HERE Maps" and File Managers.
People who didn't unlock their phones are hopeless? The ones that did unlock and need to reflash the .ffu are hopeless too?
…
Click to expand...
Click to collapse
Issue is these methods rely on the phone being developer unlocked but today I'm facing an issue where the Windows Phone SDK registration tool refuses to unlock my Lumia 520 on a different CV ROM. Not sure what the issue is since I successfully unlocked it twice in the past couple of days. I know this because I'd installed the CustomWPSystem_0700.xap and applied CustomPFD_0003.xap successfully both times.
But today, it just refuses to go beyond ""Error logging into the Windows Phone Dev Center. Check your Microsoft Account credentials and try again"" and I've no idea why. Funny thing is, it would give the same error on previous tries but the phone would be unlocked!
I understand the WPI method but it feels like overkill with higher risks to do all that for just a few registry changes to trigger updates.
And I don't have much use of a boot loader unlocked or rooted device as of today. Research didn't bring up much help either so I'm thinking of installing the last WP SDK from VS 2015 and see if it does the job.
But yes, though Microsoft says they don't have any immediate plans to remove the updates for the phones, the methods of getting those updates might become problematic.
jaNgamdurvaani said:
Issue is these methods rely on the phone being developer unlocked but today I'm facing an issue where the Windows Phone SDK registration tool refuses to unlock my Lumia 520 on a different CV ROM. Not sure what the issue is since I successfully unlocked it twice in the past couple of days. I know this because I'd installed the CustomWPSystem_0700.xap and applied CustomPFD_0003.xap successfully both times.
But today, it just refuses to go beyond ""Error logging into the Windows Phone Dev Center. Check your Microsoft Account credentials and try again"" and I've no idea why. Funny thing is, it would give the same error on previous tries but the phone would be unlocked!
I understand the WPI method but it feels like overkill with higher risks to do all that for just a few registry changes to trigger updates.
And I don't have much use of a boot loader unlocked or rooted device as of today. Research didn't bring up much help either so I'm thinking of installing the last WP SDK from VS 2015 and see if it does the job.
But yes, though Microsoft says they don't have any immediate plans to remove the updates for the phones, the methods of getting those updates might become problematic.
Click to expand...
Click to collapse
I am facing the same problem. That might be gone for good, unfortunately.

Persist Partition problem - MI 8?

Hi guys,
I could really use your help.
Three days ago my MI8 which I have for a year lost signal, data and wifi and started rebooting randomly.
I know it doesn't make sense, but it's worse in the evening, during the early afternoon I get wifi and sim signal for an hour or two, and then it starts to reboot,
sometimes it catches signal, but come evening, it's only reboots and no signal.
I'm on global stable, don't remember the version but it't the last update and mi-recovery 3.0.
I wiped the phone and unlocked the bootloader via MiUnlock, but now I can't access it because it is locked and I need to verify it - impossible since I can't get a connection, that is if I'm lucky to catch it.
So now I can't enable developer options and USB debugging.
I tried @tsongming solutions, but with no success so far. They seem like a great resource and I will keep trying.
https://forum.xda-developers.com/mi-8/help/one-repair-persist-issues-t4036919
First I tried the option number 5, but flashall.bat did nothing.
Do I have to have some drivers or something else enabled on my PC to make it work? Phone was in fastboot when I tried it.
Then I wanted to install TWRP so that I could try the option 2, but it seems my PC can't recognise the device.
After a few "daemon not running. starting it now on port 5037" messages I managed to get the command to list the devices, but it is not recognised., the list is empty that is.
I'm using USB2 ports.
Sorry for the new post, I'm hoping to get some advice for this particular situation.
I would greatly appreciate any advice.
Thank you.

ASUS ROG Phone 3 Issues

Hello All,
I am a 'Non Developer' user and its my first post on forum, so please pardon my ignorance whatsoever.
I am using an ROG P3 Tencent edition (I003DD) running Android 10 Build QKQ1.200419.002.WW_Phone-17.0823.2008.78. Over last few weeks, I am facing several issues which I will try to explain below.
1. Bluetooth: When connecting a bluetooth headset, the device connects successfully, but gets no sound. Disconnecting and reconnecting, even removing and re-adding the device doesn't help. Strangely, on connecting a device, there is a few seconds lag/ freeze before I can play a video on youtube, no sound still. Restarting the device solves the issue for the moment, but the issue remains when I reconnect after a few hours.
2. Settings keeps stopping: I am using Whatsapp Twin Apps. When trying to link a Whatsapp web device on my secondary whatsapp App, I am unable to go past 'Link a device' icon and after a few taps, get 'Settings keeps stopping' error.
I haven't faced this exact error on other apps, but have had few other apps crashing too recently in a random fashion.
3. Fingerprint: It takes several attempts to unlock the screen using fingerprint. That's despite using clean fingers screen.
I have already tried resetting/ wipe the device through Settings but that didn't fix the problem. There are no Updates available in System Update.
Questions:
1. Has anyone else faced similar issues ? If so, were you able to fix it?
2. WIll retting the phone through Bios make any difference than resetting through setting (which I already did).
3. Since the phone is originally a Chinese version and it came pre-installed with Global OS, will Bios reset put it back into Chinese?
4. Should I update to 17.0823.2102.143 manually?

Categories

Resources