Related
Hi guys!
I have a problem, sigh...
I had a Note with the stock firmware KKA/KK5 and I had flashed it with ODIN the LB1 DBT stock rom.
Now I have done e deep clean and I have reflashed the KKA/KK5 stock rom without problems or errors.
Now the system had warning me about a update... to LB1. So I have loaded the update.
Seems all okay... but now if I go in the recovery mode, I have this error:
multi csc
can't access to /system/csc/ITV/system
Anyone can help me? I would like to delete this error.
thanks!
stefano
I fixed mine with a full wipe, then boot into the system, and skip the google account setup, and then reboot into recovery, and the csc was re applied.
Alternately, which will result is a full wipe anyway, is to chnage your CSC manually. You can use CSC selector from the market, or use the short codes.
Thank you for your reply!
I have done any attempt, but nothing.
If I try to change the csc, the display show me only one CSC... that is ITV... and It should be right.
But if I go in revovery mode, I receive always the same error... cant access to.. ecc. ecc...
If I put the KKA Italy stock firmware the error doesnt appear.
If I do the OTA update... I have the error.
Please, help, I dont understand why!
bye!
steve
steveweb said:
Thank you for your reply!
I have done any attempt, but nothing.
If I try to change the csc, the display show me only one CSC... that is ITV... and It should be right.
But if I go in revovery mode, I receive always the same error... cant access to.. ecc. ecc...
If I put the KKA Italy stock firmware the error doesnt appear.
If I do the OTA update... I have the error.
Please, help, I dont understand why!
bye!
steve
Click to expand...
Click to collapse
have the same problem...i resolved getting the csc/itv folder being sent from a friend of mine...all manually without wipes etc...so what i need is alink to manually download the csc/ITV folder for galaxy note LB1 firmware...i knew here on xda there was an archive of csc but i can't find it nor the ITV..please help!
I had this on both my note and ace. Never got to the bottom of it either???
Sent from my GT-N7000 using Tapatalk
FIXED!!
PJ147 said:
I had this on both my note and ace. Never got to the bottom of it either???
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
FOUND THE ANSWER!!!after surfing the WHOLE net i found the way...and i'm sure than NOBODY has ever found the answer so this should be useful for all users!!
simply downgrade to an old directly rootable gingerbread version (in my case the kka kk5 ITV on a no brand italian galaxy note)...after having the device rooted download root explorer and get to this folder.....system/csc/ ..there you'll find a looot of csc folders (HUN, ITV, etc)...each one comes from a different nation, simply copy and paste to a pc folder or external sd folder always with root explorer...then when you'll have updated to the latest firmware simply paste the csc folders that you need ( or all of them, so you can manually change csc without the hateful "must be three chars" writings) in to system/csc/ folder...i think that this problem will solve a lot of request on the net...i stayed awaked all night to do downgrades, upgrades etc...so hope this will be helpful to all xda users!
cheers \m/
Thanks learned something new
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
Thanks learned something new
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
It's an honour to receive a "thank" from the sda staff!! honored to serve the cause
I Just Bricked My Samsung Galaxy Ace - I Switch it On and It Shows Samsung Logo Forever and Im Stuck There. I Can Still Access Recovery and Download Mode Though
If Im Not Wrong, I Bricked It By Deleting Certain System Files, Is There A way to Restore The System Files via Download Mode or Recovery Mode ?
* I Deleted Samsungbootloop.qmg, And The Next time I Booted, This Happened. Could it Be A Cause ? I've Read other Forums About this File, and It Seems Like it Doesnt Brick the Phone If Deleted
Btw, My Phone Model Is GT-S5830i
U only shot is to flash through odin dont worry nothings wrong yet ...your phone is not even close to being bricked try rom manager and report rom manager is the best brick tool out there
Flash Through Odin ? You Mean Flash My Stock Firmware?
Try Rom Manager ? But I Cant Even Use The App on My Mobile?
Im Actually Quite New To Android, Cant Really Grasp What You're Saying
kyrogex said:
Flash Through Odin ? You Mean Flash My Stock Firmware?
Try Rom Manager ? But I Cant Even Use The App on My Mobile?
Im Actually Quite New To Android, Cant Really Grasp What You're Saying
Click to expand...
Click to collapse
I was just kidding dude
dont use Rom Manager it will brick your phone
Why dont u google a bit ? There are many Odin tutorials out there on you tube
Yes i mean u should flash your stock rom through odin ..
And dont worry we are here to help you ...so can u google?
Thanks For The Help So Far,
I Thought About Flashing My Stock Firmware, But Does it Include Restoring System Files?
Yea I Googled Before Opening This Thread
kyrogex said:
Thanks For The Help So Far,
I Thought About Flashing My Stock Firmware, But Does it Include Restoring System Files?
Yea I Googled Before Opening This Thread
Click to expand...
Click to collapse
Yes ...your system files will be restored but your data will get wiped off then again beggers cant be choosers ...
Download your stock rom at samfirmware.com ...odin youll find anywhere ...
Doesnt Matter, I Only Used My Phone For Abt 3 Wks Now... No Important Infomation Inside
Haha Cool! Got Odin v1.85 Working on My Computer, Just Wondering About The Firmwares... Does CSC and PDA Matter ?
So I've Connected My Phone To The Computer, While My Phone Is In Download Mode. My Computer Cant Seem to Install the Driver, Can I Still Use Odin ?
*Sorry I know I Ask Alot Of Qns, But I Just Wanna Be Extra Careful
No problem its good to be careful than be sorry
No u cant proceed until odin shows that "yellow box " .
About your pc not recognizng your phone you should have the samsung usb drivers ull find them at samfirmware.com
And also when u use odin u must "run as admin " or "run as vista executable( i hope u have seen some odin tutorial ) first keep odin open then connect your phone
I m sorry for the late replies...i know how excited/ sad u are ..please bear with me
You know you are rooted when you use XDA more than FB
I dont know about csc and pda . Whenever i flashed it was always a " one package " file ...google it ...dont worry u cant brick your phone via odin unless you flash a rom not meant for your phone xD
You know you are rooted when you use XDA more than FB
Dragonoid said:
U only shot is to flash through odin dont worry nothings wrong yet ...your phone is not even close to being bricked try rom manager and report rom manager is the best brick tool out there
Click to expand...
Click to collapse
why is rom manager on market etc. if it bricks? I even seen posts on this site people using it.
You Must Have Been In The Same Situation as I Am Right Now Before ( About The Excitement And All )
Your Right About That, Im Waiting For Your Replies, However Dont Feel Sorry... You're Already Helping Me ! And Its Not Like Waiting For Your Replies Are Unbearable. Im Guilty For Doing The Same Right? Replying Late
Yea It Does Come Out The Yellow Box, Odin Can Detect My Phone. But About The Firmware, Does CSC and PDA Matter?
kyrogex said:
You Must Have Been In The Same Situation as I Am Right Now Before ( About The Excitement And All )
Your Right About That, Im Waiting For Your Replies, However Dont Feel Sorry... You're Already Helping Me ! And Its Not Like Waiting For Your Replies Are Unbearable. Im Guilty For Doing The Same Right? Replying Late
Yea It Does Come Out The Yellow Box, Odin Can Detect My Phone. But About The Firmware, Does CSC and PDA Matter?
Click to expand...
Click to collapse
Dont think so use pda it sounds better
You know you are rooted when you use XDA more than FB
chrcol said:
why is rom manager on market etc. if it bricks? I even seen posts on this site people using it.
Click to expand...
Click to collapse
Rom Manager is compatible with some phones..not with Ace ...though i have heard that now the compatibilty is improved ...
I have bricked my phone using Rom manager too ( i was a noob then flashed the wrong recovery luckily for me the service centre guys repaired it for me ) ...
and i think you are late you have not seen the many threads that were here due to Rom manager bricking
You know you are rooted when you use XDA more than FB
-____- dude you could have googled check my screenshot and always always always remember
GOOGLE B4 YOU ASK SOMETHING
GOOGLE is your best friend
You are lucky i m in a good mood any other day i would have not cared to reply to such questions...
You know you are rooted when you use XDA more than FB
And read this if u want to know about any more terminology
http://galaxy551.wordpress.com/2012/01/08/the-stock-rom-and-odin-thread/
You know you are rooted when you use XDA more than FB
Lol Wow I Did Google Before I asked, Just That They Gave me A Bunch Of Stuff That my Brain Couldnt Comprehend
So Now, I Have Downloaded The Stock Firmware and It Seems Like There is Only One File, Unlike In Tutorials Which Have the CSC PDA MODEM File. So I Dont know How to Use The File in Odin.
I Have Seen Tutorials Where The Stock Firmware Consist Of One File Like Mine Also, Where They Input That One Big File Into The PDA Slot. However Mine Doesnt Seem To Work.
There Could Be Afew Outcomes While Flashing that One File into PDA with Odin ( The message in Odin, Telling me what it is doing currently)
1. Setup Connection... ( And Then Stucks There )
2. Flash Failure
Mind Helping Me Abit, Seems Disastrous Lol.. Much Thanks
I think yours is a "one package " file ...there is an option in odin ..tick it and navigate to the file
You know you are rooted when you use XDA more than FB
Dragonoid said:
I think yours is a "one package " file ...there is an option in odin ..tick it and navigate to the file
You know you are rooted when you use XDA more than FB
Click to expand...
Click to collapse
Agree. Put that file in the bottom right line and go on! You've almost done it.
I can't resist of asking you why are you using capital letters on every word?
Sent from my Ace using XDA
TheArt. said:
I can't resist of asking you why are you using capital letters on every word?
Sent from my Ace using XDA
Click to expand...
Click to collapse
Lol yeah i didnt notice that untill u pointed out
You know you are rooted when you use XDA more than FB
So I've Downloaded Many Versions Of Odin3 and Odin Multi Downloader Cause So Many Of Em Dont Work for Me
All Versions for Odin Multi Downloader ( Even 4.38, A Version For The Ace )
- Cant Detect My Phone
Odin3
- Has The Yellow Box When I Plug In Phone
- However, It Justs Stucks There Forever as The Message Says SetupConnection...
Lol Cause Typing Like These Looks Awesome To Me
I hope some one can help. I have never seen anything like this. I have an 8.9 GT-P7310 and its acting very strange. I have tried to Odin anything I can from stock ICS to custom recovery to stock honeycomb and stock recovery. Everything, I repeat everything fails. It looks like it will go and fails everytime. In this case I would look at it as a brick with the firmware upgrade failure message but no. All I have to do is boot it into recovery reset and it turns on. I just cant do anything :crying: Also the tab flickers red whenever I make a selection but I am out of ideas here..
I have a new Sam cable and tried all Usb ports
Make sure to turn off all the developer options. Sounds like you have USB debugging and 'Screen Flash' turned on ... at least.
boscorama said:
Make sure to turn off all the developer options. Sounds like you have USB debugging and 'Screen Flash' turned on ... at least.
Click to expand...
Click to collapse
Thanks for the quick reply.. Ill check it right now and report back
Edit: Odin still fails
I feel like it has a corrupted bootloader or so,
how to circumvent this?
well maybe if you use the pit file to repartition the tablet then install a boot loader from an old and complete stock honeycomb would make a difference.
you can check sammobile for a stock complete honey comb and check additional downloads for a PDF to describe how to flash using ODIN and another link to the 7300 and 7310 pit file to repartition.
after all I am not sure, but I am rather giving a shot, so you might wait for a more experienced senior user who can figure it out straight
prince93 said:
I feel like it has a corrupted bootloader or so,
how to circumvent this?
well maybe if you use the pit file to repartition the tablet then install a boot loader from an old and complete stock honeycomb would make a difference.
you can check sammobile for a stock complete honey comb and check additional downloads for a PDF to describe how to flash using ODIN and another link to the 7300 and 7310 pit file to repartition.
after all I am not sure, but I am rather giving a shot, so you might wait for a more experienced senior user who can figure it out straight
Click to expand...
Click to collapse
I felt like I needed the pit file but wasn't sure. I will look for it but doubt that I will find. If you know where to get the pit file please get me the link. I appreciate it.
Edit: Can I just pull the pit file from a stock ROM
ReEdit: I think I found what I need. Ill report back.
addictedhacks said:
I felt like I needed the pit file but wasn't sure. I will look for it but doubt that I will find. If you know where to get the pit file please get me the link. I appreciate it.
Edit: Can I just pull the pit file from a stock ROM
ReEdit: I think I found what I need. Ill report back.
Click to expand...
Click to collapse
you can find the pit file at samfirmware if you search for the tab in "firmware and files"
But I'm really not sure of this. I'm just thinking with you, so my advice is to wait some time for a senior member who can help you without guessing, because they may render the tablet unusable, so it might be abit dangerous to go for these guesses right now .
prince93 said:
you can find the pit file at samfirmware if you search for the tab in "firmware and files"
But I'm really not sure of this. I'm just thinking with you, so my advice is to wait some time for a senior member who can help you without guessing, because they may render the tablet unusable, so it might be abit dangerous to go for these guesses right now .
Click to expand...
Click to collapse
Ok now i am screwed tablet stuck in download.
Doesnt work with the pit file either.
Have you flashed the pit file with repartition ticked?
Also after repartitoning, have you flashed the bootloader of stock honeycomb then flashed a stock honeycomb for your tablet? (@ PDA & CSC)?
Sent from my GT-P7300 using xda app-developers app
prince93 said:
Have you flashed the pit file with repartition ticked?
Also after repartitoning, have you flashed the bootloader of stock honeycomb then flashed a stock honeycomb for your tablet? (@ PDA & CSC)?
Sent from my GT-P7300 using xda app-developers app
Click to expand...
Click to collapse
I did... There is only one and only one thing that will flash successfully and thats the pit. Nothing else will flash.
addictedhacks said:
I did... There is only one and only one thing that will flash successfully and thats the pit. Nothing else will flash.
Click to expand...
Click to collapse
Have you checked the service manual for changing the software for the tablet on samfirmware?
I read that after you flash the pit file, you should remove the battery then connect to odin and flash the bootloader, PDA, CSC files from a previous complete stock.
Please read the service manual carefully from samfirmware to check the steps accuratley.
Sent from my GT-P7300 using xda app-developers app
prince93 said:
Have you checked the service manual for changing the software for the tablet on samfirmware?
I read that after you flash the pit file, you should remove the battery then connect to odin and flash the bootloader, PDA, CSC files from a previous complete stock.
Please read the service manual carefully from samfirmware to check the steps accuratley.
Sent from my GT-P7300 using xda app-developers app
Click to expand...
Click to collapse
Yea I tried that just now. No luck... I am going to read the instructions but I am sure I have done everything correctly.
Edit: I am doing everything correctly. Only the Pit will flash successfully. Since I have flashed the pit I have lost my stock recovery. Before I used to just factory reset and turn it back on now I cant..
Hello Guys i flashed the Germany Version of 4.3 lte last night and in doing so i have Temporarily killed my Phone.
I have tried all the Recoveries processes via Kies and Odin and i am having no luck.
I think the reason why it won't flash is because the Germany 4.3 is a Newer Version than the Stock 4.1.2.
When i'm in Odin i get sboot.bin Fail when trying to Flash the Latest Stock rom. I am able to Flash the Germany 4.3 again and that flashes but then the Phone Stays on the Samsung Flash Screen.
Could someone please Help? I have been on with this for Hours now. I think what i need is a 4.3 Version of any rom in Odin .tar format so i can at least get the phone to boot up and then maybe i can get CWM Recovery on there and flash a Stock rom that way.
Thanks in Advance
You have to remove sboot.bin and tz.bin when downgrading. Be careful, downgrading will give you Knox warranty void 0x1!
Sent from my GT-I9305 using xda app-developers app
.NetRolller 3D said:
You have to remove sboot.bin and tz.bin when downgrading. Be careful, downgrading will give you Knox warranty void 0x1!
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
I have already seen that Message in Tiny Writing. What does that mean if i get that and how do you remove sboot.bin and TZ.bin
Do i remove them from the Stock 4.1.2 or the Germany 4.3?
My head is well and truely done in. I was up till 5am trying to fix it and then when i woke i went straight back to it and i still havn't got it working.
Thanks for your help in advance.
marti4578 said:
I have already seen that Message in Tiny Writing. What does that mean if i get that and how do you remove sboot.bin and TZ.bin
Do i remove them from the Stock 4.1.2 or the Germany 4.3?
My head is well and truely done in. I was up till 5am trying to fix it and then when i woke i went straight back to it and i still havn't got it working.
Thanks for your help in advance.
Click to expand...
Click to collapse
I am in the same boat if u found a solution help me also
Currently i flashed philz recovery upon which i have flashed tgp 11.30 but have no imei baseband.
marti4578 said:
I have already seen that Message in Tiny Writing. What does that mean if i get that.
= warranty void and no way so far to remove the count .
Click to expand...
Click to collapse
AMoizK said:
I am in the same boat if u found a solution help me also
Currently i flashed philz recovery upon which i have flashed tgp 11.30 but have no imei baseband.
Click to expand...
Click to collapse
Have you got any efs backup made by yourself? Or have you ever used boeffla kernel or any other that backups efs partition?
Hbohd said:
Have you got any efs backup made by yourself? Or have you ever used boeffla kernel or any other that backups efs partition?
Click to expand...
Click to collapse
Hello I don't have any EFS Backups done by Myself and i have never used Boeffla Kernel or any other Backup. I am so at my Witts end it unreal.
I have tried to do Kies recovery and i am back at the Firmware Upgrade Encountered an Issue. Please select recovery mode in Kies and Try again.
I have no idea which way to go or what to do. I know it will be fixed but i have little Faith at the Moment.
Thanks for your help in advance.
marti4578 said:
Hello I don't have any EFS Backups done by Myself and i have never used Boeffla Kernel or any other Backup. I am so at my Witts end it unreal.
I have tried to do Kies recovery and i am back at the Firmware Upgrade Encountered an Issue. Please select recovery mode in Kies and Try again.
I have no idea which way to go or what to do. I know it will be fixed but i have little Faith at the Moment.
Thanks for your help in advance.
Click to expand...
Click to collapse
THE kies frimware intilition doesnt work as you have 4.3 bootloader and knox blocks older boot loader
dont worry when 4.3 becomes available in your area it wont have to downgrade and ultimately this method will work but still things are looking pretty bad dor the intermediatory days.
PS is ther anyway to restore baseband imei without any backup
AMoizK said:
THE kies frimware intilition doesnt work as you have 4.3 bootloader and knox blocks older boot loader
dont worry when 4.3 becomes available in your area it wont have to downgrade and ultimately this method will work but still things are looking pretty bad dor the intermediatory days.
PS is ther anyway to restore baseband imei without any backup
Click to expand...
Click to collapse
What if i download the Germany Version again and try flashing. I thought it would of worked? I am now in this situation surely the Country it comes from wouldn't make a difference? Could someone take the Germany 4.3 and make it a Working Version .tar file to flash with Odin3?
marti4578 said:
What if i download the Germany Version again and try flashing. I thought it would of worked? I am now in this situation surely the Country it comes from wouldn't make a difference? Could someone take the Germany 4.3 and make it a Working Version .tar file to flash with Odin3?
Click to expand...
Click to collapse
I ment through kies.
Hello Guys i have Fantastic News!!
I have no idea what i did different, However i have reflashed the German 4.3 on my GT-I9305 and this time to my Total Surprise it worked!!
I wish i could say what i did and it worked but i have absolutely no idea what was done differently.
Thanks all for your Help.
I will say i installed the drivers manually and just on the off chance i flashed it again with the file i downloaded last Night. I also flashed a recover trying to get it to load a recover so i could flash a zip file.
marti4578 said:
Hello Guys i have Fantastic News!!
I have no idea what i did different, However i have reflashed the German 4.3 on my GT-I9305 and this time to my Total Surprise it worked!!
I wish i could say what i did and it worked but i have absolutely no idea what was done differently.
Thanks all for your Help.
I will say i installed the drivers manually and just on the off chance i flashed it again with the file i downloaded last Night. I also flashed a recover trying to get it to load a recover so i could flash a zip file.
Click to expand...
Click to collapse
Which file can u specify pls and also which recovery also is wifi and data working
AMoizK said:
Which file can u specify pls and also which recovery also is wifi and data working
Click to expand...
Click to collapse
which file????:crying:
AMoizK said:
which file????:crying:
Click to expand...
Click to collapse
Please read the rules .
JJEgan said:
Please read the rules .
Click to expand...
Click to collapse
Can u point me to the rules
AMoizK said:
Can u point me to the rules
Click to expand...
Click to collapse
http://forum.xda-developers.com/announcement.php?f=256
5. Create a thread or post a message only once.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer. (Also refer to Rule 16)
Finally
I am so feeling sucessful right now although i didnt got 4.3 but i was sucessful in getting my imei and baseband and network back.:good:
Sorry for the late response but when you get stuck on the Samsung boot screen all you have to do is boot into Recovery and do a Factory Reset and Wipe Cache.
Another thing to remember is to flash the modem for your country otherwise you might accidently disable some frequencies and enable other useless ones.
xkwizt said:
Sorry for the late response but when you get stuck on the Samsung boot screen all you have to do is boot into Recovery and do a Factory Reset and Wipe Cache.
Another thing to remember is to flash the modem for your country otherwise you might accidently disable some frequencies and enable other useless ones.
Click to expand...
Click to collapse
Doesn't work I will syill be stuck at boot screen
AMoizK said:
Doesn't work I will syill be stuck at boot screen
Click to expand...
Click to collapse
Which 4.3 update did you flash? I used the DBT German one.
Did you flash the right modem too? It worked for me and i was using a i9305T. All i did was flash the latest modem (from the brand of phone i have which is Telstra) and did a wipe data and wipe cache.
My phone was rooted then it updated to the 4.3 and when i reset it because the galaxy play store was not working i tried to re root it and it got stuck on a screen upon boot that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But when i go into Kies it just tries to connect and does't not recognize my phone. I need help on what to do please, I have tried everything.
lavorno said:
My phone was rooted then it updated to the 4.3 and when i reset it because the galaxy play store was not working i tried to re root it and it got stuck on a screen upon boot that says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But when i go into Kies it just tries to connect and does't not recognize my phone. I need help on what to do please, I have tried everything.
Click to expand...
Click to collapse
Do you have CWM installed?
tiskael said:
Do you have CWM installed?
Click to expand...
Click to collapse
no
lavorno said:
no
Click to expand...
Click to collapse
Sorry, should have read a bit closer. I was going to recommend that you use CWM to flash ROMs back but you don't have the i9295. Where did you purchase it from? I'm from Australia, so I'm not sure about the US, but I think I've read in other threads that some Best Buys(?) have Samsung stores in them that have reflashed the stock firmware free of charge without actually checking your warranty. Maybe you want to look into this?
tiskael said:
Sorry, should have read a bit closer. I was going to recommend that you use CWM to flash ROMs back but you don't have the i9295. Where did you purchase it from? I'm from Australia, so I'm not sure about the US, but I think I've read in other threads that some Best Buys(?) have Samsung stores in them that have reflashed the stock firmware free of charge without actually checking your warranty. Maybe you want to look into this?
The problem with your S4A is that it has a locked bootloader, so you can't flash firmware yourself, sorry!
Click to expand...
Click to collapse
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
lavorno said:
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
Click to expand...
Click to collapse
If you don't want to go to Best Buy right away you can try flashing the firmware yourself.
http://forum.xda-developers.com/showthread.php?t=2629093
If you took the official OTA for 4.3, ML2, there is no known root exploit available. Odin is easy to flash with - there are 1 clicks that do all the hard work for you, all you have to do is put your phone into download mode and the app does the rest on your PC. Make sure you have the proper drivers installed. Best way I found was to download the software suite from Samsung for the phone. Without the proper drivers Odin won't see the phone (I found this out the hard way.)
lavorno said:
I bought it in the US at a best buy so i will take it there and see what they can do, thanks for the help.
Click to expand...
Click to collapse
I just took it to best buy and they restored it and now it is as good as new, thanks for the advice.
lavorno said:
I just took it to best buy and they restored it and now it is as good as new, thanks for the advice.
Click to expand...
Click to collapse
No worries, I heard they were pretty good in the US. Remember though, you can't root it on 4.3 (yet). If they've set it back to 4.2.2 then you can root again and not update to 4.3. If they've set it to 4.3 then either you will have to follow @Devo7v's instruction to flash back or wait it out as a root method is currently being worked on.
Bricked SGH i537
my sghi537 has bricked. i can only enter into download mode..
As i downloaded stock firmware of 4.3 ML2 and i tried to flash it by Odin...
Unfortunately at first odin said that i have no pit partition...
then i downloaded Pit and tried to flash but ^^^ write failed ^^^ was the thing i saw every time...
I looked up my phn download mode screen and i found that ^^^ Write protection Enable ^^^
So i couldnt flash stock ML2 firmware and my phn is bricked ....
Someone pls help me...........
Shabnur said:
my sghi537 has bricked. i can only enter into download mode..
As i downloaded stock firmware of 4.3 ML2 and i tried to flash it by Odin...
Unfortunately at first odin said that i have no pit partition...
then i downloaded Pit and tried to flash but ^^^ write failed ^^^ was the thing i saw every time...
I looked up my phn download mode screen and i found that ^^^ Write protection Enable ^^^
So i couldnt flash stock ML2 firmware and my phn is bricked ....
Someone pls help me...........
Click to expand...
Click to collapse
What firmware were you originally on.
Devo7v said:
What firmware were you originally on.
Click to expand...
Click to collapse
I was in 4.3 Ml2
it will b a lot if u help me......
my phn is dead now..
Its saying try kies to recover firmware......
Shabnur said:
I was in 4.3 Ml2
it will b a lot if u help me......
my phn is dead now..
Its saying try kies to recover firmware......
Click to expand...
Click to collapse
Download the full ML2 Odin, check the MD5 to make sure you didn't get a corrupted download. MAKE SURE all the files are in the right place in Odin and flash away. It should put the stock firmware back on the phone. Then you can proceed from there.
Devo7v said:
Download the full ML2 Odin, check the MD5 to make sure you didn't get a corrupted download. MAKE SURE all the files are in the right place in Odin and flash away. It should put the stock firmware back on the phone. Then you can proceed from there.
Click to expand...
Click to collapse
Sorry to disturb u again..
i m new in advance user mode..
will u tell me how i can compare the md5 num..
i dont even no where it is..
pls help me a little bit more....
Shabnur said:
Sorry to disturb u again..
i m new in advance user mode..
will u tell me how i can compare the md5 num..
i dont even no where it is..
pls help me a little bit more....
Click to expand...
Click to collapse
The MD5 is sort of like the fingerprint for the file, so you need the MD5 of the file you downloaded to match the MD5 that was posted in the thread. Download WinMD5Sum from the website here. Under File Name load the ML2 Odin zip package that you downloaded. WinMD5Sum will generate the MD5 of the file you downloaded and you can compare that to the MD5 the uploader posted in the thread. If the MD5's match then that means you downloaded exactly what was posted. If the MD5's don't match exactly, then you have a corrupted download and need to download it again.