My device is imported from Taiwan.
I've set the device language to English but this one screen it doesn't seem to reflect.
This screen is shown when the device is powered off and charging.
TIA
As per the closed discussion in the Zentalk forums, there doesn't seem to be a fix for this ATM.
Chinese text on Charging Screen (Powered Off)
Is there any way to change the language on the power status screen? This is the screen that shows a green progress bar with the percentage charging when the phone is powered off (activated by pressing the power button once). Sorry for the bad picture...had to use my laptop webcam.
zentalk.asus.com
Related
Hi All
Just to let you all know that i have searched and searched all over including XDA to help my self before posting so please no "use the search" if you know what i am saying
Here is what i wonder if someone can help me with:
I was given a Tab that apparently has got water on it(only a some drops) and now is not "turning one"?!
And i hope that it can be saved, and the reason why i hope this is because when it is plugged in to a charged it is charging the battery(Confirmed by voltmeter in batter contacts and screen graphics showing that the battery is filling up)
When the tab is connected to the charger it reboot about ever 3-5 seconds(Showing battery icon on the screen), and if i hold down volume up and power button is shows yellow text for 1-2 seconds before rebooting, and if i hold down volume down and power is shows the Downloading Android icon before rebooting after 1-2 seconds.
I have experience with electronics so what i wonder is it like a watchdog timer in the motherboard that could be busted??
And is there ANY HOPE for this one????
Hi !
In advance, sorry for my english.
I have problem with my HTC ONE m7.
I broke my digitizer and I bought a full set(screen + digi.).
I replaced it, and i have a problem.
After turn on the phone, i see the black screen and sound of turning on.
When i push the power button and vol -, the touch buttons blinking.
When I put the phone into charger, in first time after plug in the battery, the notification diode is blinking, and after about 10 sec. the light is red, the same when i normally charging the phone. When I turn the phone on, the charging stopped. And when the phone is switched on, not charging.
The flexes aren't damaged.
Is it possible, that i get a broken screen in shop? - i don't see any damage.
Hello!
ID: C5J8 BIOS: 2.05c
Symptom: if I shut down the tablet from Windows 10 or in Android 5.0 then I can't power on by button.
If I connect the USB cable afterwards it can be powered on random time - sometime after usb cable connect 5 minutes, sometimes more, it is very stochastic behaviour!
My question is: is it bug or feature? The reasen is settings in BIOS or what the hell, I dont understand? I have to tilt my family shut down the tablet, because they can't power on without me...
Do anybody have a good idea?
has nothing to do with windows or android for sure ... when the tab is in the S4 or S5 states the control of the tab is done by the BIOS firmware
1. do a restart/reboot from whatever OS and after that a power off and check whether is responsive now
2. do a forced power off (long press power btn until turns off) and check again
however if it did not show this behavior on your previous bios version then for sure is caused by something in the new bios (i would guess has something to do with the way the battery level is now detected, normally if your battery is below a level it will refuse to start, but if somehow the bios doesn't properly detect that...) maybe you can also try a 'load defaults' in the bios?
Have a look at this thread, it explains how the tablet determines when to turn on.
Dear wallabyman!
Thank you, it is very detailed and good post. I understand, and we can't do anything - it is a feature, but a very ugly feature from Teclast!
This time do you have any change in this operating? Could you power on by button after shut down?
*************************
ionioni
It has operated in the same way with the original BIOS too!
The reason why I found the linked thread was because I am experiencing some problems too, although not as bad as you describe them.
I am able to always turn on the tablet. If it does not turn on, I am trying the following things (in no particular order):
- Make sure tablet is really off and not stuck with black screen, by holding power buton for 10-15 seconds to do a hard powerdown
- attach a USB lamp to USB-host adapter to see if it is still powered on
- let it charge for about 30 minutes with original charger and original cable before trying to turn on
- not move the USB charging cable too much, my device seems very sensitive to small changes in the USB charging connection. I have the tablet lying flat, and try to power on without touching the cable if it is charging at the same time
- set quiet boot to off in Bios to see the red AMI logo
a minor aspect:
- if the device is charging and I press the power button only once, the Bios boot screen will appear together with the battery, but will not boot until the power is pressed again and battery charge is sufficient
Sleeping:
- putting the device to sleep from Android (sikke1s ROM, not for your device) and waking up again seems to work perfectly for me now.
- with Windows I still have big issues, trying to narrow it down currently
- from the shutdown state I can always boot up within a few tries (press the button not too long or to short, try hard power off even if it appears to be off and again)
Hello dear android help community,
I noticed on my Z2 Pro that the charge indicator got stuck at 65%, when I noticed that, I checked the Amp Battery App and all values were read in incorrectly. The temperature was at -20 ° C lul and the voltage at 0.02V. I tried to restart it but then the display remained black. No boot selection, nothing! If I hold the switch for about 30 seconds, it vibrates briefly but the display remains black. If it is connected to the PC at the same time, it will be recognized as Unknown Device (The USB device has returned an invalid USB device descriptor). On the ZUK is the current RR-O-v6.1.0-20180710-z2_row with the void5.4 kernel and twrp-3.2.2-0. I'm trying to empty the battery completely, but then I do not know how to continue.
Are there any other ideas how to get it to boot again?
Hi, I have a Note8 that I can not get to charge normally.
I've tried lots of chargers and stack charging with various on/off durations but no LEDs light and I don't get any booting icons.
Sometimes I get white text on a black background that flashes on screen for a split second and the phone vibrates while the text is up:
"Samsung Galaxy Note8" "Powered by Android"
Just now, I connected it to a 3Amp USB 3.1 port on my computer and held down the Volume- Bixby Power buttons.
The download mode Warning screen came up and stayed up. I'd gotten it up before but it'd quickly blink off.
Now, if I select Volume up (to continue) or Lower left key (show barcode) the screen goes black.
What I'm wondering is this: does the Note8 battery charge while it is at this teal Warning screen for Download Mode?
I'm hoping the battery does charge and if I leave it like this overnight, it might have at least a few percent so the battery will return to normal charging behavior.
Thanks in advance for any comments.
For some reason this phone has a weird issue that, in some times, lets discharge the battery to 0%, making it unable to even hold a charge anymore. A lot of people fixed this by putting the phone in a wireless charger while ALSO plugging the usb charger. This will make the device power on and start charging normally. You might have success doing this. Otherwise, your might need to replace the battery.
moxze said:
Hi, I have a Note8 that I can not get to charge normally.
I've tried lots of chargers and stack charging with various on/off durations but no LEDs light and I don't get any booting icons.
Sometimes I get white text on a black background that flashes on screen for a split second and the phone vibrates while the text is up:
"Samsung Galaxy Note8" "Powered by Android"
Just now, I connected it to a 3Amp USB 3.1 port on my computer and held down the Volume- Bixby Power buttons.
The download mode Warning screen came up and stayed up. I'd gotten it up before but it'd quickly blink off.
Now, if I select Volume up (to continue) or Lower left key (show barcode) the screen goes black.
What I'm wondering is this: does the Note8 battery charge while it is at this teal Warning screen for Download Mode?
I'm hoping the battery does charge and if I leave it like this overnight, it might have at least a few percent so the battery will return to normal charging behavior.
Thanks in advance for any comments.
Click to expand...
Click to collapse
Yes it should charge in download mode. Why you are having this problem is beyond me though, I would guess it's either a dodgy charging port, or a end of life battery, or both. If you have a wireless charging pad, try that, then at least you can cross one problem that it might be off.
stonedpsycho said:
Yes it should charge in download mode. Why you are having this problem is beyond me though, I would guess it's either a dodgy charging port, or a end of life battery, or both. If you have a wireless charging pad, try that, then at least you can cross one problem that it might be off.
Click to expand...
Click to collapse
Thanks for the tip about charging at the download mode Warning screen.
I've read a lot about Note8 battery and charging issues and I have seen the trick with a wireless charger - place note8 on wireless charger, add wired usb charging, remove usb, re-add usb, and it should start charging.
I don't have a wireless charger and this Note8 was a gift from a friend who moved up to a newer, functioning device. I don't have any other wireless charging phones so I'm hoping to get this Note8 charging again without having to buy a wireless charger. Though, that is my next and final step.
If it charges while at the download mode Warning screen (it has a white triangle and exclamation point at the bottom), I hope it'll be able to charge normally by morning.
If I had an in-line USB multimeter, I could see the amps flowing into the phone and be able to tell if it's charging.
That's something else I might get in addition to a Qi charger.