Hello everyone, I ran into a problem after flashing magisk padched.img, got a bootloop, now there is no recovery and no boot into the system, I only have fastboot, I tried to flash files from payload. bin , can't get into fastbootD? can anyone have any ideas?
(my error - fastboot: error: Failed to boot into userspace fastboot; one or more components might be unbootable.)
-failed remote: flashing is not allowed for critical partitions- when i try flash system.img ( fastboot flashing unlock & fastboot flashing unlock_critical is ok)
VovaHouse said:
Hallo allemaal, ik liep tegen een probleem aan na het knipperen van magisk padched.img, kreeg een bootloop, nu is er geen herstel en geen boot in het systeem, ik heb alleen fastboot, ik probeerde bestanden van payload te flashen. bin , kan niet in fastbootD komen? kan iemand ideeën hebben?
(mijn fout - fastboot: fout: kan niet opstarten in userspace fastboot; een of meer componenten kunnen mogelijk niet worden opgestart.)
-mislukte afstandsbediening: knipperen is niet toegestaan voor kritieke partities - wanneer ik probeer flash system.img (fastboot knipperen ontgrendelen en fastboot knipperen unlock_critical is ok)missen
Click to expand...
Click to collapse
maybe you can try Easyflasher v0.8.3b to unbrick with universal_naked_driver 0.72 for apx mode in windows device manager.
Then you can unbrick and put a new original software on it.
Think this is the best old tool there is and they are on a lot places to download
OnePlus Community
Introducing our new OnePlus Community experience, with a completely revamped structure, built from the ground-up.
forums.oneplus.com
or just try this link above
Lemoncake85 said:
maybe you can try Easyflasher v0.8.3b to unbrick with universal_naked_driver 0.72 for apx mode in windows device manager.
Then you can unbrick and put a new original software on it.
Think this is the best old tool there is and they are on a lot places to downloaв
Click to expand...
Click to collapse
And here asus? this op 10
VovaHouse said:
And here asus? this op 10
Click to expand...
Click to collapse
did you manage to unbrick?
eric3231559 said:
did you manage to unbrick?
Click to expand...
Click to collapse
No..
Did you unbrick your oneplus 10 pro.?
Mod Edit: Quoted Post Deleted
A paid online service?? Are you serious?
That's some XDA spirit right there... If you have a method. Share it, or at the very least sell the package, but as a service? That's a joke.
Related
Hello
J'ai donc installe une Rom sur mon Incredible S mais au moment de reboot il laisse la page Htc j'ai donc fait un backup, ca fait pareil, j'ai fait un restore, ca fait pareil
Je stress
Pourquoi ca fait ca ?
Thank you
est-que tu peux parler anglais s'il te plait? English website - pls speak the language
Sorry
Hello
So I installed a ROM on my Incredible S but when reboot it leaves Htc page so I made a backup, it's been like that, I did a restore, it makes such
I stress
Why is that do that?
Thank you
Are you using google translate?
that screws things up mate..
are you trying to say that you flashed a rom & its getting stuck on the htc boot animation page?
and what happens if u restore???
and not even sure if you'll understand what i've written!
WIILI120, since you responded in something similar to him may be u can help translate ?
world94 said:
Sorry
Hello
So I installed a ROM on my Incredible S but when reboot it leaves Htc page so I made a backup, it's been like that, I did a restore, it makes such
I stress
Why is that do that?
Thank you
Click to expand...
Click to collapse
Do you have an unlocked bootloader? If so, you need to extract the boot.img file from the ROM's zip file and flash it manually in FASTBOOT USB mode using the command:
fastboot flash boot [path to boot.img]
Yes do I use google translate
I flashed my ROM and I get stuck on the HTC page, if I did the same when i restore
:crying::crying::crying:
letmedanz said:
Are you using google translate?
that screws things up mate..
are you trying to say that you flashed a rom & its getting stuck on the htc boot animation page?
and what happens if u restore???
and not even sure if you'll understand what i've written!
WIILI120, since you responded in something similar to him may be u can help translate ?
Click to expand...
Click to collapse
Actually it's French but I really suck at it But if I'm getting it right, you quite understood his problem.
@world94: Dude we really need some more information on that Nous avons besoin plus d'information
What informations ?
tpbklake said:
Do you have an unlocked bootloader? If so, you need to extract the boot.img file from the ROM's zip file and flash it manually in FASTBOOT USB mode using the command:
fastboot flash boot [path to boot.img]
Click to expand...
Click to collapse
world94 said:
What informations ?
Click to expand...
Click to collapse
Tell us about your phone. How did you root? Which custom recovery are you using?
Also please read the above reply to your initial question!
I root from HtcDev and i install CWM
I test the fastboot tomorrow
Thank you
world94 said:
I root from HtcDev and i install CWM
I test the fastboot tomorrow
Thank you
Click to expand...
Click to collapse
OK then that is definitely your problem.
Flashing the boot.img file in FASTBOOT USB mode will fix you up.
You will also need to do this when you restore a backup in CWM. You will manually have to flash the boot.img in the backup directory on your SD card.
Now when I want to turn it on (normal or recovery) it will not turn on but when I want to charge the orange light flashes
Thank you
I don't understand what i have to do :crying:
world94 said:
Now when I want to turn it on (normal or recovery) it will not turn on but when I want to charge the orange light flashes
Thank you
Click to expand...
Click to collapse
world94 said:
I don't understand what i have to do :crying:
Click to expand...
Click to collapse
So did you pull the battery when you kept getting stuck on the HTC splash screen?
How many times did you try that and have to pull the battery?
Yes, yesterday ans today I had to remove a tens of times and tried to install the ROM about a stock tens of times as
world94 said:
Yes, yesterday ans today I had to remove a tens of times and tried to install the ROM about a stock tens of times as
Click to expand...
Click to collapse
So have you been able to try flashing the boot.img file in FASTBOOT USB mode yet? Or is that what you are trying to do now?
If you have indeed pulled the battery several times yesterday as you stated, then it could be possible that you now have a damaged emmc chip in the phone and that is why it will not boot.
I made the fastboot but he said he can not find the boot
And how can I do to boot it on something?
thank you
world94 said:
I made the fastboot but he said he can not find the boot
And how can I do to boot it on something?
thank you
Click to expand...
Click to collapse
You need to extract the boot.img from the ROM's zip file and then copy it to the same directory where you have installed the fastboot.exe
Instead of cwm is that?
world94 said:
Instead of cwm is that?
Click to expand...
Click to collapse
When you unlocked your IncS using the HTCDEV.com site, it had instructions on setting up the Android SDK tools adb.exe and fastboot.exe on your PC. That is the directory you should copy the boot.img file to.
Then you would use the same instructions to put the phone in FASTBOOT USB mode like you did when you generated the unlock token, but you would enter the command:
fastboot flash boot boot.img
necesito su ayuda mi note 4(N910T) se apago después de flashear custom rom estaba terminando de configurar cuando se apago y no volvió a encender no puedo entrar a modo download ni recovery espero me puedan ayudar
Google Translation:
I need your help my note 4 ( N910T ) will turn off after flashing custom ROM set was finishing when I went off and did not come to light can not enter download mode or recovery hope I can help
What did you use to flash the device originally? Did you use ODIN to flash the device originally?
Anonymously_Unknown said:
Google Translation:
I need your help my note 4 ( N910T ) will turn off after flashing custom ROM set was finishing when I went off and did not come to light can not enter download mode or recovery hope I can help
What did you use to flash the device originally? Did you use ODIN to flash the device originally?
Click to expand...
Click to collapse
Flash rom rom DrKetan was setting before completing the cel blinking LED in red as if he had finished the pile and not relit , can not go into any recovery mode or download and my pc recognizes nothing
It sounds as though your device will not need to be professionally JTAG'd to get it to boot at this point.
Anonymously_Unknown said:
It sounds as though your device will not need to be professionally JTAG'd to get it to boot at this point.
Click to expand...
Click to collapse
I can do As I JTAG tool but it tells me that is not compatible
Hello everyone,
I am having issues installing TWRP recovery on my Honor 5C NEM-AL10. build number: NEM-AL10C00B171-2 GRAM
The screen freeze on the recovery booting screen when I try to boot using "volume up + power" buttons.
My main goal here is to install a new European rom on my phone. In order to do so I need TWRP but I am so lost Hoping to find help here.
Here is what I tried at the moment :
• I unlocked my bootloader using this guide (unofficial method) : modaco.com/forums/topic/377348-how-to-bootloader-unlock-your-honor-5c-official-and-unofficial-methods
Eventhough I don't have an "unlock OEM" in develloper mode menu, everything went perfectly (I didn't noticed anything wrong at least)
• I installed adb drivers + adb and fastboot tools on my computer
•Then I tried to flash twrp from a link I found in a forum and I though it went okay but couldn't access TWRP using recovery boot. So I tried again flashing twrp-3.0.2-0-nemo.img from the official TWRP site using adb and fastboot line command :
C:\adb>fastboot flash recovery twrp-3.0.2-0-nemo.img
target reported max download size of 471859200 bytes
sending 'recovery' (21882 KB)...
OKAY [ 0.732s]
writing 'recovery'...
OKAY [ 0.273s]
finished. total time: 1.005s
C:\adb>fastboot reboot
rebooting...
finished. total time: 0.022s
Click to expand...
Click to collapse
Everything seemed okay to me but still can't boot and I am stuck at this recovery screen. The only solution from there is to press volume down + power to shutdown the phone and then it boots again in normal mode
I sincerly hope someone has an idea on how to fix it. I'll keep searching but I must say I can't see what I am doing wrong :/. I'd be really thankfull is someone find me a solution !
Thanks for reading !
Edit : I solved this by flashing TWRP-CN.img instead. From this post
Works great now
Hi I am having the same issue NEM-L51 - i can flash twrp but can't boot back in it...i always get the default emui recovery... i tried a bunch of different versions of twrp and none has worked so far... (the link is dead for the one in the thread you provide)
my phone is unlocked.
any ideas ? I am using fastboot from a mac, would that be an issue ?
NEM-L51 Your device has been unlocked and can't be trusted
Hi all,
Same problem here on my "bootloader unlocked" NEM-L51.
Last twrp ( twrp-3.1.1-0-nemo.img 21.4M 2017-05-17 22:32:56 EDT ) written OK but impossible to boot in it.
It is still eRecovery that comes when I use the Huawei menu of the unlocked device 1, 2 or 3 to access the recovery and when I try to go to recovery using adb reboot recovery I get : "Your device has been unlocked and can't be trusted" then the device is stucked on a message saying booting bla bla... And nothing happens.
Some help would be appreciated
Got a Honor 7 lite, and i use this method to root it :
https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356
Work so fine.
Enjoy
Merci pour votre réponse.
Bonjour,
En fait j'avais trouvé cette solution et j'ai créé un thread pour la diffuser à la communauté.
NEM-L51 EMUI 5.0 Android 7.0 : TWRP (nemo) written but not bootable, how to root ?
Je profite de ce message pour vous demander, si vous avez osé effectuer d'autres tâches (wipe dalvik, reset factory, backup/restore, etc) avec le TWRP du P9lite sur votre NEM-L51 ?
patrickdg said:
Got a Honor 7 lite, and i use this method to root it :
https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356
Work so fine.
Enjoy
Click to expand...
Click to collapse
....... Am typing in english and it automatically changes to a different language
---------- Post added at 12:50 PM ---------- Previous post was at 12:49 PM ----------
eproust said:
Bonjour,
En fait j'avais trouvé cette solution et j'ai créé un thread pour la diffuser
Click to expand...
Click to collapse
twrp issu nem l 22
bro I having sem problem
sahildutt said:
bro I having sem problem
Click to expand...
Click to collapse
Describe more as OP's problem is already solved.
twrp issu nem l 22 please help
hi
Same problem here on my "bootloader unlocked" NEM-L22
Last twrp ( twrp-3.1.1-0-nemo.img 21.4M 2017-05-17 22:32:56 EDT ) written OK but impossible to boot in it.
It is still eRecovery that comes when I use the Huawei menu of the unlocked device 1, 2 or 3 to access the recovery and when I try to go to recovery using adb reboot recovery I get : "Your device has been unlocked and can't be trusted" then the device is stucked on a message saying booting bla bla... And nothing happens.
please guys help
I tried to flash MI9T PRO fastboot rom on my k20pro. at first, i tried to flash the latest one (10.3.2.0) and it ended up with an error saying Missmatch in Device and IMAGE. after that, i tried to flash an older version (10.3.1.0) and it did not show any error but it's not finishing the flashing progress. i already tried refreshing , selecting again the flash folder and flash again but it did not stop the flashing progress. what should i do now? please help.
note that i use a Ryzen PC
Flashed Successfully
Finally, i could flash the latest fastboot rom successfully using this simple JAVA application "XiaomiADBFastbootTools.jar" within 2.5 min. i have attached the application UI and link. u may try it if you face the same problem using MI flash tool. Cheers !
Link : https://github.com/Saki-EU/XiaomiADBFastbootTools
zahidhasanzahid said:
Finally, i could flash the latest fastboot rom successfully using this simple JAVA application "XiaomiADBFastbootTools.jar" within 2.5 min. i have attached the application UI and link. u may try it if you face the same problem using MI flash tool. Cheers !
Link : https://github.com/Saki-EU/XiaomiADBFastbootTools
Click to expand...
Click to collapse
thank you, you save my life!
miflash is suck, always failed to flash with it...
zahidhasanzahid said:
Flashed Successfully
Finally, i could flash the latest fastboot rom successfully using this simple JAVA application "XiaomiADBFastbootTools.jar" within 2.5 min. i have attached the application UI and link. u may try it if you face the same problem using MI flash tool. Cheers !
Link : https://github.com/Saki-EU/XiaomiADBFastbootTools
Click to expand...
Click to collapse
Thanks a lot for the clue. Never tried it before although saw it earlier.
It's really great tool. Much better than miFlash Tool and also the progress is visible in the log.
Cheers.
zahidhasanzahid said:
Flashed Successfully
Finally, i could flash the latest fastboot rom successfully using this simple JAVA application "XiaomiADBFastbootTools.jar" within 2.5 min. i have attached the application UI and link. u may try it if you face the same problem using MI flash tool. Cheers !
Link : https://github.com/Saki-EU/XiaomiADBFastbootTools
Click to expand...
Click to collapse
I didn't know that this tool used flash stock. I always use it for debloat.
Thanks for sharing.
zahidhasanzahid said:
I tried to flash MI9T PRO fastboot rom on my k20pro. at first, i tried to flash the latest one (10.3.2.0) and it ended up with an error saying Missmatch in Device and IMAGE. after that, i tried to flash an older version (10.3.1.0) and it did not show any error but it's not finishing the flashing progress. i already tried refreshing , selecting again the flash folder and flash again but it did not stop the flashing progress. what should i do now? please help.
note that i use a Ryzen PC
Click to expand...
Click to collapse
Same thing is happening to me. I was trying to shift from Chinese ROM to Global in my Redmi Note AI. My phone turned on, already converted to Global, done Initial MIUI setup steps on the phone(selecting language, region, google account login...etc) but, in my PC MIFlashTool, it's still flashing, progress bar is green, no error is shown! should I unplug the USB and start using the phone as it is or re-flash using your Java tool?
why is my bootloader showing as locked even though i am on lineage. unable to use the jar for that reason.
alguém pode me ajudar? Eu coloquei meu celular pra instalar a rom, mas ele fica com o status em $pause. Gostaria de saber o que isso significa e se eu deveria esperar até algum resultado aparecer na tela.
Forum rules say posts must be in English.
This forum is for Mi 9T Pro / K20 Pro. Your screenshot shows you are flashing a Mi A3 ROM.
You are either posting in the wrong forum, or flashing the wrong ROM.
Hello everyone!
I have tried several times flashing TWRP with ODIN on my device (Samsung A30), but i get "fail" message on ODIN screen.
I have unlocked Developer Mode and checked OEM unlocking and USB debugging to be active.
Can someone have the time and will to give me a solution in few steps? I want to flash a custom rom after, so i would appreciate your time on responding me!
Regards!
I had this same problem of giving an error in the installation of TWRP, in fact, before installing TWRP, you have to install vbmeta, it is what blocks the installation of TWRP, install it and then install TWRP that will work, download vbmeta disabled, install in AP, then install TWRP and be happy
Thank you man! Going to, one last question, is it going to be flash-able with ODIN or do i need to use another installation method?
Thanks again for your quick response!
@Deivid Soltoski i got the same fail message even when tried to flash the vbmeta disabled...i guess its another way you install it not through ODIN...
alb.boy said:
@Deivid Soltoski i got the same fail message even when tried to flash the vbmeta disabled...i guess its another way you install it not through ODIN...
Click to expand...
Click to collapse
Show log...
And you write your message not there, there is a separate topic for questions
use twrp 3.4
alb.boy said:
Hello everyone!
I have tried several times flashing TWRP with ODIN on my device (Samsung A30), but i get "fail" message on ODIN screen.
I have unlocked Developer Mode and checked OEM unlocking and USB debugging to be active.
Can someone have the time and will to give me a solution in few steps? I want to flash a custom rom after, so i would appreciate your time on responding me!
Regards!
Click to expand...
Click to collapse
you need to unlock the bootloader and oem lock to able to flash modded firmware like twrp
alb.boy said:
@Deivid Soltoski recebi a mesma mensagem de falha mesmo quando tentei fazer o flash do vbmeta desabilitado...acho que é outra maneira de instalar não através do ODIN...
Click to expand...
Click to collapse
Oh no, but if you're having more problems, try downgrading to Android 10, which has fewer problems
tutibreaker said:
you need to unlock the bootloader and oem lock to able to flash modded firmware like twrp
Click to expand...
Click to collapse
I have done that through development mode. But still not working
alb.boy said:
I have done that through development mode. But still not working
Click to expand...
Click to collapse
No you dont, dude search for a guide here and read it
tutibreaker said:
No you dont, dude search for a guide here and read it
Click to expand...
Click to collapse
Will try, thanks though!