Database Develop

Restore Stock Image and Lock the Bootloader (for Warranty)

--------------------------------> DISCLAIMER: <------------------------------------
Guide for pure educational purpose. If you are going to use it, you do it to your risk and danger, I will not be held responsible if your phone will not work anymore.
----------------------------------------------------------------------------------------​
This tutorial is for relock the boot loader and restore original stock image on Lenovo Z5 Pro (L78031 - NO-GT version)
For security reason, it's better if you do an Nandroid Backup with the TWRP.
https://forum.xda-developers.com/z5...ow-to-unlock-bootloader-install-twrp-t3890402
I'm not responsable if this operation brick you mobile phone!
How to put the phone in EDL:
1) The phone must be Turn-OFF.
2) Press all two buttons at the same time vol+ and vol- and connect the cable USB.
3) Put the phone in EDL mode only a second before to press the button DOWNLOAD (you must be very very fast otherwise you'll have Sahara error)
Do it
1) Download a Rom: Here you find the 293 and 320 Version (if one give you an error, try the other one), Here you find 342 Version
2) Download and Install ADB Driver: Here or look the Attachments
3) Download and Install Qualcomm Flasher: Qualcomm Flasher Qfil QPST V.2.0.1.9 or look the Attachments
4) download and install Qualcomm Driver: For Windows 32 Bit - For Windows 64 Bit or look the Attachment 32 Bit - Attachments 64bit
5) Download and Install Minimal ADB fastboot from the Attachments
6) Follow this Steps:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now, Press all two buttons at the same time vol+ and vol- and connect the cable USB to the phone and quickly press Download button!
Done!
Sahara Error: https://forum.xda-developers.com/showpost.php?p=77229641&postcount=2
Sahara Error 2:

Can You provide the password for stock rom zip?

backoffbart said:
Can You provide the password for stock rom zip?
Click to expand...
Click to collapse
I've downloaded, and is not asking me any password...

hi, guy! after my phone back to stock rom, what i have to do to relock bootloader? pls, help me! when i enter to system update: "your system has been root, we are unable to provide the lastest version of the system".

I will find somewhere rom with google apps form Lenovo Z5 Pro?

fuchstruong said:
hi, guy! after my phone back to stock rom, what i have to do to relock bootloader? pls, help me! when i enter to system update: "your system has been root, we are unable to provide the lastest version of the system".
Click to expand...
Click to collapse
Use fastboot command:
fastboot -i 0x2b4c oem lock
see you

BadCluster said:
Use fastboot command:
fastboot -i 0x2b4c oem lock
see you
Click to expand...
Click to collapse
not working :crying: i can't post the image for u to see
my cmd after entering "fastboot -i 0x2b4c oem lock" is "< waiting for any device >"
what should i do?

fuchstruong said:
not working :crying: i can't post the image for u to see
my cmd after entering "fastboot -i 0x2b4c oem lock" is "< waiting for any device >"
what should i do?
Click to expand...
Click to collapse
it seems like the pc don't see the phone
try to reinstall all driver or change PC / Usb cable
ps usb debug is enabled?

BadCluster said:
it seems like the pc don't see the phone
try to reinstall all driver or change PC / Usb cable
ps usb debug is enabled?
Click to expand...
Click to collapse
yes, usb debug is enabled. i can enter in to bootloader mode by using "adb boot bootloader" but using "fastboot -i 0x2b4c oem lock" nothing happen

error QFIL
hi friend, could you help me, by pressing download I get this download fail: firehose fhloader: fail the system can not find the specified file

checo6969 said:
hi friend, could you help me, by pressing download I get this download fail: firehose fhloader: fail the system can not find the specified file
Click to expand...
Click to collapse
hi guy! u try copying rom to C:\Program Files (x86)\Qualcomm\QPST\bin
---------- Post added at 02:32 AM ---------- Previous post was at 02:27 AM ----------
BadCluster said:
--------------------------------> DISCLAIMER: <------------------------------------
Guide for pure educational purpose. If you are going to use it, you do it to your risk and danger, I will not be held responsible if your phone will not work anymore.
----------------------------------------------------------------------------------------​
This tutorial is for relock the boot loader and restore original stock image on Lenovo Z5 Pro (L78031 - NO-GT version)
For security reason, it's better if you do an Nandroid Backup with the TWRP.
https://forum.xda-developers.com/z5...ow-to-unlock-bootloader-install-twrp-t3890402
I'm not responsable if this operation brick you mobile phone!
How to put the phone in EDL:
1) The phone must be Turn-OFF.
2) Press all two buttons at the same time vol+ and vol- and connect the cable USB.
3) Put the phone in EDL mode only a second before to press the button DOWNLOAD (you must be very very fast otherwise you'll have Sahara error)
Do it
1) Download a Rom: Here you find the 293 and 320 Version (if one give you an error, try the other one), Here you find 342 Version
2) Download and Install ADB Driver: Here or look the Attachments
3) Download and Install Qualcomm Flasher: Qualcomm Flasher Qfil QPST V.2.0.1.9 or look the Attachments
4) download and install Qualcomm Driver: For Windows 32 Bit - For Windows 64 Bit or look the Attachment 32 Bit - Attachments 64bit
5) Download and Install Minimal ADB fastboot from the Attachments
6) Follow this Steps:
Now, Press all two buttons at the same time vol+ and vol- and connect the cable USB to the phone and quickly press Download button!
Done!
Sahara Error: https://forum.xda-developers.com/showpost.php?p=77229641&postcount=2
Sahara Error 2:
Click to expand...
Click to collapse
hi guy, if i'ld like to lock the bootloader, i can flash any stock rom or i've to flash the first stock rom of it?

will reinstalling the stock rom give back OTA updates?

fuchstruong said:
not working :crying: i can't post the image for u to see
my cmd after entering "fastboot -i 0x2b4c oem lock" is "< waiting for any device >"
what should i do?
Click to expand...
Click to collapse
i have the same problem. i followed all steps from twrp and installing the stock rom, but after all the hastle im not able to lock the bootloader so i still cannot get any updates.
i have the same problem where it says waiting for device. would be nice if there will be a solution for this to get future updates soon!
---------- Post added at 05:16 PM ---------- Previous post was at 04:49 PM ----------
succesful flashed version 355
THIS IS A VERY RISKY OPERATION AND I ALMOST LOST MY PHONE!!
it didnt go as planned.
i installed twrp and created a backup (not of system, is that nesecarry?) to get to when everything got messed up.
and boi, did it get messed up...
problem 1: when trying to install the rom with QFIL for the first time i got a sahara error and the phone lost its OS. i wanted to reinstall the twrp backup as i got really freaked out about losing my phone. somehow it did not get into edl or something and i failed the installation process and ended up with a broken phone with inly TWRP installed.
problem 2: when wanting to reinstall the backup in twrp i got some error saying the \system partition was not mounted. searching online gave me a solution to this problem, but reinstalling the backup still gave errors. on startup i got a "unsuccesful encryption" error, which yielded a useless backup. also after reformatting i got again the /system not mounted error, but now with a "partition is occupied or used" error. even the solutions online wouldnt work, so my online solution was to flash the original rom with QFIL.
solution:
trying to flash the rom resulted in a 1: sahara error, 2: a file not found error and 3: a phone not in EDL error.
when using the QFIL flasher provided by BadCluster i got the first two errors, and there was no quick way of resolving this problem. the post from @Nikorasu of another QFIL programm being used led to to the last error. this was good news as the file not found had been gone and now the only thing i had to do was putting the phone in EDL mode. MANY thanks to Nikorasu!!
trying to flash now resulted in an error where QFIL tried to put the phone in EDL mode, but failed to do so. a article online provided me with the following ADB commands to use. try to open to the bootloader/twrp recovery menu, and using the ADB cmd try to see if your device is connected (command "adb devices"). if so, type the command "adb reboot edl" and the phone will reboot in EDL mode. this was the only thing left to flash the stock rom back.
moral of the story!
1. only do this if you can miss the phone, this will save you a LOT of stress!
2. only do this if you can afford losing your phone!
3. in my case, the TWRP backup was pretty useles. only do this if you can afford to lose data!
4. THE MOST IMPORTANT ONE: NEVER GIVE UP! using the internet you can google every error and eventually get to a solution.
if you have any questions please ask

Well there is no way i can flash the original rom in this device. Is there anybody wanting to do it remotely? I just keep getting the error firehose fhloader: fail the system can not find the specified file

maxihinz said:
Well there is no way i can flash the original rom in this device. Is there anybody wanting to do it remotely? I just keep getting the error firehose fhloader: fail the system can not find the specified file
Click to expand...
Click to collapse
I had the same error, but another version of QFIL solved this for me.
someone posted this in another topic:
https://mega.nz/#!al0WlKTK!Zi23HafWA1uWVjc8kmEMQntW81LuW4_AXMo7BOSVkck
I used this version to successfully flash my device.

anonOmattie said:
I had the same error, but another version of QFIL solved this for me.
someone posted this in another topic:
https://mega.nz/#!al0WlKTK!Zi23HafWA1uWVjc8kmEMQntW81LuW4_AXMo7BOSVkck
I used this version to successfully flash my device.
Click to expand...
Click to collapse
Yes! This was the right tool to flash my device too.
Thank you very much

Can you send me Z5 Pro, persist img, modemst1 and modemst2 img file because I just found out how to unbrick Z5 pro phone after it get bricked down while flashing ROM through qfil, when I was flashing ROM through qfil that time I have selected erase all before download after that my phone has dead it as not booting up full now I have just unbrick my phone using Z5 persist img I need Z5 pro ROM persist img and modemst1 and modemst2 img so that my phone will working full now sensors and sim card are not working due to this three file missing please send me these three img file.

maxihinz said:
Yes! This was the right tool to flash my device too.
Thank you very much
Click to expand...
Click to collapse
very good tohear! enjoiy your lenovo z5 pro
mahegbangar007 said:
Can you send me Z5 Pro, persist img, modemst1 and modemst2 img file because I just found out how to unbrick Z5 pro phone after it get bricked down while flashing ROM through qfil, when I was flashing ROM through qfil that time I have selected erase all before download after that my phone has dead it as not booting up full now I have just unbrick my phone using Z5 persist img I need Z5 pro ROM persist img and modemst1 and modemst2 img so that my phone will working full now sensors and sim card are not working due to this three file missing please send me these three img file.
Click to expand...
Click to collapse
please take a look here:
https://www.mediafire.com/folder/c8x7kcznzwi6b,926v3389w8x7c,u7wu7b08zholk/shared
your files are in here.

help-me
hello, please help me, I bought a lenovo z5 pro gt and tried to unlock the bootloader using the method that you spoke of the site of zuk, choose option Z2 pro and put the serial I got the file by email and I used the command: fastboot flash unlock unlock_bootloader.img, the cell unlock the bootloader but now he does not want to call anymore he got in bootloop n know what to do already tried to use the QFIL + FIRMWARE Stock of lenovo z5 pro gt (L78032)
QFIL LOG VVVVVVV
01:22:15: DEBUG: XML FILE (103 bytes): CharsInBuffer=709-103=606
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Calling handler for program" /></data>
-------------------------------------------------------------------------------------------
01:22:15: INFO: TARGET SAID: 'INFO: Calling handler for program'
01:22:15: DEBUG: XML FILE (126 bytes): CharsInBuffer=606-126=480
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Failed to open the SDCC Device slot 1 partition 0" /></data>
-------------------------------------------------------------------------------------------
01:22:15: INFO: TARGET SAID: 'ERROR: Failed to open the SDCC Device slot 1 partition 0'
01:22:15: DEBUG: XML FILE (131 bytes): CharsInBuffer=480-131=349
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Failed to open the device:1 slot:1 partition:0 error:0" /></data>
-------------------------------------------------------------------------------------------
01:22:15: INFO: TARGET SAID: 'ERROR: Failed to open the device:1 slot:1 partition:0 error:0'
01:22:15: DEBUG: XML FILE (123 bytes): CharsInBuffer=349-123=226
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: OPEN handle NULL and no error, weird 344377924" /></data>
-------------------------------------------------------------------------------------------
01:22:15: INFO: TARGET SAID: 'ERROR: OPEN handle NULL and no error, weird 344377924'
01:22:15: DEBUG: XML FILE (132 bytes): CharsInBuffer=226-132=94
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Failed to open device, type:eMMC, slot:1, lun:0 error:3" /></data>
-------------------------------------------------------------------------------------------
01:22:15: INFO: TARGET SAID: 'ERROR: Failed to open device, type:eMMC, slot:1, lun:0 error:3'
01:22:15: DEBUG: XML FILE (94 bytes): CharsInBuffer=94-94=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" rawmode="false" /></data>
-------------------------------------------------------------------------------------------
01:22:15: DEBUG: Response was 'NAK'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
01:22:15: {ERROR: handleProgram:8866 program FAILED - Please see log my filehouse error something like that.

Hi, I have a Lenovo z5 pro gt tutorial. I have been able to do unbrick using this tut
Hi, I have a Lenovo z5 pro gt tutorial. I have been able to do unbrick using this tututorial + your lenovo z5 pro tutorial, create a post here on the site to help others I was already desperate
club.lenovo.cn/detail/5433752
---------- Post added at 04:16 PM ---------- Previous post was at 03:56 PM ----------
SrCDA said:
Hi, I have a Lenovo z5 pro gt tutorial. I have been able to do unbrick using this tututorial + your lenovo z5 pro tutorial, create a post here on the site to help others I was already desperate
club.lenovo.cn/detail/5433752
Click to expand...
Click to collapse
I can also unlock the bootloader but when I did the process the unload bootloader was unlocked and unbrick

How To Guide [GUIDE][REALME 8][Unofficial] New method Unlock Bootloader, Flash TWRP and Root [RMX3085]

Hello guys!
As you all know that there is no deeptest.apk available for our device.
So we have to unlock our bootloader unofficially!
NOTE: IF U HAVEN'T UPGRADED AFTER A19 ROM THEN SKIP FIRST PART !!! And follow the instructions from 2nd part.​Also this method only works on RUI 2.0
DON'T TRY THIS IN RUI 3.0
/*
* This Guide is tested and working.
* However I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about unlocking and flashing TWRP
* Before flashing it! YOU are choosing to make these modifications.
*/
Click to expand...
Click to collapse
So Lets Begin the Process:
1. Flashing A19 Partitions:​Requirements:
PC or Laptop
Internet connection
Realme 8
USB cable
Take a backup of your data, Just in case if any error happens.
Windows Method
Requirements:
Bypass Tools Pack - (DRIVER AND BYPASS FILES)
SP Flash Tool
Decrypted OFP (OPPO FIRMWARE PACKAGE) Partitions:
Partitions.zip
Install Python from Windows Store
libusb-win32 - Having Issues? Use this.
Get usbdk installer (.msi) from here and install it
Steps:
1) Extract the zip
2) Go to driver folder, find the .inf file right click and press install.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3)Download this file and install it, after installing power off phone and connect to pc while holding Vol+- (don't leave the buttons after connecting) . You might need this driver as well if it's not detected.
Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off, and don't leave the buttons) and you will see the mtkdriver down below. Install it.
Choose MediaTek USB Port and install it.
4)Then run the brom.bat under Bypass folder.
5) Now power off the phone and connect the phone while holding volume + and - (Don't leave the buttons until the bypass is done)
6)After the above step Go into Flash Tool folder and open the SPFlash tool and launch flash_tool.exe
7) Click on Options>Options and go to Connections and select UART and set Baud Rate to 921600
8)Now in Sp flash tool select the scatter file which you have extracted from Partitions.zip and make sure that prealoder, lk, and lk2 is selected.
9) You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!
Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".
10) Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone
After flashing it should look like this. Download has been complete.
2. UNLOCKING BOOTLOADER:​Requirements
PC or Laptop
Internet connection
USB cable
Take a backup of your data since it'll be wiped
Go to About phone > Version and tap build number 7 times
Go to Settings > advanced settings > Developer options and turn on OEM unlocking and USB debugging
Steps:
Install USBDk
Download this and extract : https://github.com/bkerler/mtkclient/archive/refs/heads/main.zip
Now open command prompt in that folder
Now type pip3 install -r requirements.txt and hit enter
Now type python mtk e metadata,userdata,md_udc hit enter - This command wipes data
Then power off your phone and hold both volume buttons and connect usb cable (DON'T LEAVE THE BUTTONS, KEEP THEM HOLDING THROUGHOUT THE PROCESS) - This boots device into BROM mode
Now type python mtk da seccfg unlock This will unlock the bootloader (If you face waiting for device issue then unplug the device and plug in the device again with holding volume buttons, also don't leave the buttons)
After this unplug your phone and turn it on (It'll show your device dm verity corrupted and first boot might take 5-10 mins, don't panic)
Now your bootloader is unlocked
Due to realme's limitations you still can't access fastboot after unlocking via this method
3. ROOTING YOUR DEVICE:​
Install This Magisk apk​
Download Patched Boot image (According to your device firmware) from the link and put them in MTK client folder.
Now in pc type python mtk w boot,vbmeta boot.patched,vbmeta.img.empty hit enter
Then power off your phone and connect usb while holding both volume buttons (and don't leave them)
Now disconnect and reboot phone
Now open Magisk app
4. FLASHING TWRP RECOVERY:​
Download TWRP - From here and extract it.
Download and install Flashify app
Open Flashify and grant root permission
Select Recovery image from the extracted twrp folder and install it
After flashing is done click reboot now or you can reboot to recovery via magisk app
"Congrats Now we have working TWRP in Realme 8, Enjoy "
Credits:
Me @Saksham Antil (aka Tony Stark) for this guide and Testing
@Engrudhy for older guide
@Skyhuppa for making TWRP
Elias for finding out the way to ubl
B Kerler fot MTKClient
Stock boot Image (to revert root)
If you face any issues lem me know down below

Reserved

Woohoo finally rooted new. Thanks for the detailed guide

Can I get root call recording?

ayouh2o said:
Can I get root call recording?
Click to expand...
Click to collapse
Yes

Ahoj, prosím o radu. Úspěšně jsem odemkl bootloader a skončil jsem u bodu 3. Stáhl jsem soubor magisk, nahrál a nainstaloval do telefonu. Poté v příkazovém řádku pc kde jsem provedl odemknutí bootloaderu jsem pokračoval zadaným příkazem a připojil telefon dle návodu. Napsala mi tuto chybu
DAXFlash - [LIB]: ← [31mNázev_souboru neexistuje: vbmeta.img, ruší se flash zápis. ← [0m
Nepodařilo se zapsat vbmeta.img do sektoru 73480 s počtem sektorů 2048."
co jsem udělal špatně? Děkuju

niki.rsb said:
Ahoj, prosím o radu. Úspěšně jsem odemkl bootloader a skončil jsem u bodu 3. Stáhl jsem soubor magisk, nahrál a nainstaloval do telefonu. Poté v příkazovém řádku pc kde jsem provedl odemknutí bootloaderu jsem pokračoval zadaným příkazem a připojil telefon dle návodu. Napsala mi tuto chybu
DAXFlash - [LIB]: ← [31mNázev_souboru neexistuje: vbmeta.img, ruší se flash zápis. ← [0m
Nepodařilo se zapsat vbmeta.img do sektoru 73480 s počtem sektorů 2048."
co jsem udělal špatně? Děkuju
Click to expand...
Click to collapse
There maybe some spelling mistake , you can try again.

Tony Stark said:
There maybe some spelling mistake , you can try again.
Click to expand...
Click to collapse
I'm sorry, I don't speak English well. I wrote in a translator and sent a version in my language
niki.rsb said:
Ahoj, prosím o radu. Úspěšně jsem odemkl bootloader a skončil jsem u bodu 3. Stáhl jsem soubor magisk, nahrál a nainstaloval do telefonu. Poté v příkazovém řádku pc kde jsem provedl odemknutí bootloaderu jsem pokračoval zadaným příkazem a připojil telefon dle návodu. Napsala mi tuto chybu
DAXFlash - [LIB]: ← [31mNázev_souboru neexistuje: vbmeta.img, ruší se flash zápis. ← [0m
Nepodařilo se zapsat vbmeta.img do sektoru 73480 s počtem sektorů 2048."
co jsem udělal špatně? Děkuju
Click to expand...
Click to collapse
Hi, please advise. I successfully unlocked the bootloader and ended up at point 3. I downloaded the magisk file, uploaded it and installed it on my phone. Then in the command line pc where I unlocked the bootloader I continued with the entered command and connected the phone according to the instructions. She wrote me this error
DAXFlash - [LIB]: ← [31mFilename does not exist: vbmeta.img, flash notation is canceled. ← [0m Failed to write vbmeta.img to sector 73480 with number of sectors 2048. "
what did I do wrong? Thank you

niki.rsb said:
I'm sorry, I don't speak English well. I wrote in a translator and sent a version in my language
Hi, please advise. I successfully unlocked the bootloader and ended up at point 3. I downloaded the magisk file, uploaded it and installed it on my phone. Then in the command line pc where I unlocked the bootloader I continued with the entered command and connected the phone according to the instructions. She wrote me this error
DAXFlash - [LIB]: ← [31mFilename does not exist: vbmeta.img, flash notation is canceled. ← [0m Failed to write vbmeta.img to sector 73480 with number of sectors 2048. "
what did I do wrong? Thank you
Click to expand...
Click to collapse
You can try again. I think you didn't write the command in correct way.

Tony Stark said:
Můžete to zkusit znovu. Myslím, že jsi ten příkaz nenapsal správně.
Click to expand...
Click to collapse
Děkuji za odpověď. Už jsem to vyřešil. Nahrál jsem soubor vbmeta.img do mtclient, zkusil jsem to znovu a šlo to dobře. nebo to mohlo být jak píšeš. telefon je root, dám flashify oprávnění. ale přes flashify flash twrp to neprojde, vždy to ukazuje chybu. je možné twrp flash přes fastboot?

niki.rsb said:
Děkuji za odpověď. Už jsem to vyřešil. Nahrál jsem soubor vbmeta.img do mtclient, zkusil jsem to znovu a šlo to dobře. nebo to mohlo být jak píšeš. telefon je root, dám flashify oprávnění. ale přes flashify flash twrp to neprojde, vždy to ukazuje chybu. je možné twrp flash přes fastboot?
Click to expand...
Click to collapse
Check permissions in magisk manager app. If it didn't work you can also use sp flash tool to flash recovery. For more information you can check this guide also -> link

at the step 3 beween
* Install This Magisk apk
and
* Now in pc type python mtk w boot,vbmeta boot.patched,vbmeta.img.empty hit enter
seems must be explicitly written additional steps :
** copy original boot.img to device
** in magisk make a patched version (check new file in log of creation)
** copy resulting file to the PC
** rename to boot.patched

Tony Stark said:
Check permissions in magisk manager app. If it didn't work you can also use sp flash tool to flash recovery. For more information you can check this guide also -> link
Click to expand...
Click to collapse
I'm done according to the instructions. If I made a mistake somewhere, I don't think it would be finished. Thank you for the instructions and thank you for your help.
Where can I find a call recording? If I do the factory settings or the update do I have to do it again?

DaLiV said:
at the step 3 beween
* Install This Magisk apk
and
* Now in pc type python mtk w boot,vbmeta boot.patched,vbmeta.img.empty hit enter
seems must be explicitly written additional steps :
** copy original boot.img to device
** in magisk make a patched version (check new file in log of creation)
** copy resulting file to the PC
** rename to boot.patched
Click to expand...
Click to collapse
friend thanks for the help. You wrote it exactly. I have to step by step, I don't understand it and I don't even understand what you advised me, I'm sorry. But I'm done, so ok

Tony Stark said:
Yes
Click to expand...
Click to collapse
Can I upgrade magisk app???

ayouh2o said:
Can I upgrade magisk app???
Click to expand...
Click to collapse
Yeah you can, but stay on alpha version don't go for stable.

Tony Stark said:
Yeah you can, but stay on alpha version don't go for stable.
Click to expand...
Click to collapse
how to write boot.img file

how to resolve stuck on realme logo. please help me

Full Recovery
ayouh2o said:
how to resolve stuck on realme logo. please help me
Click to expand...
Click to collapse
Full recvery
READ CAREFULY!
!!! DONT FORGET TO DE-SELECT NAMED 3 PARTITIONS !!! - TRIPLE CHECK CORRECTNESS BEFORE FLASHING !!!
[GUIDE][UNBRICK] Realme 8 Unbrick/Upgrade/Downgrade [RMX3085]
Hello everyone! So after the new MediaTek DAA and SLA protection bypasses you can find GitHub repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX3085 (Realme 8) ONLY. DON'T DO...
forum.xda-developers.com

very good instruction.
thx

General [GUIDE][UNBRICK] Realme 8 Unbrick/Upgrade/Downgrade [RMX3085]

Hello everyone! So after the new MediaTek DAA and SLA protection bypasses you can find GitHub repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX3085 (Realme 8) ONLY. DON'T DO ANY OF THESE IF YOU HAVE SOMETHING ELSE!
ALWAYS USE DOWNLOAD ONLY MODE OF SP FLASH TOOL.
DON'T TOUCH ANYTHING RELATED TO FORMAT ON SP FLASH TOOL! (IT'S WRITTEN EVERYWHERE, YOU WILL LOSE YOUR IMEIS IF YOU USE FORMAT ALL + DOWNLOAD. YOU ARE SAFE IF YOU USE DOWNLOAD ONLY.)
Requirements:
PC or Laptop
Internet connection
Realme 8
USB cable
Windows Method
Requirements:
Bypass Tools Pack - (DRIVER AND BYPASS FILES)
SP Flash Tool
Decrypted OFP (OPPO FIRMWARE PACKAGE) :
Indian
A.22 (Indian) - GDrive
A.24 (Indian) - GDrive
A.26 (Indian) - Gdrive
C.05 (Indian) - GDrive
C.09 (Indian) - GDrive
C.11 (Indian) - GDrive
Global
A.22 (Global) - GDrive
A.24 (Global) - GDrive
A.26 (Global) - GDrive
Install Python from Windows Store
libusb-win32 - Having Issues? Use this.
Get usbdk installer (.msi) from here and install it
Steps:
1) Extract the zip
2) Go to driver folder, find the .inf file right click and press install.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3) Download this file and install it, after installing power off phone and connect to pc while holding Vol+- (don't leave the buttons after connecting) . You might need this driver as well if it's not detected.
4) Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off, and don't leave the buttons) and you will see the mtkdriver down below. Install it.
5) Choose MediaTek USB Port and install it.
6) Then run the brom.bat under Bypass folder.
7) Now power off the phone and connect the phone while holding volume + and - (Don't leave the buttons until the bypass is done)
8) After the above step Go into Flash Tool folder and open the SPFlash tool go to Options>Option
9) Click on Connections and select UART and set Baud Rate to 921600
10) After that choose scatter file and also if not set, set your download-agent. You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!
Select all the Partitions except opporeserve2 and cdt_engineering. otherwise you will get errors.
*11) If you want to flash super.img partition also then download this scatter.txt file and replace it with the another scatter file which is present in the decrypted firmware folder. After that select it again in sp flash tool.
Again Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".
Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone and use it like before now! All your userdata will (inevitably) be cleared!
After flashing it should look like this. Download has been complete. Enjoy!
"Congrats Now your Realme 8 is Unbricked "
Credits :
https://github.com/bkerler/ for decryptor and for creating the tool.
If you face any issues write them down below...

Some people having this problem so I want to add one more thing to the guide. If you are not having any issues related to boot then don't follow these steps.
After waiting more then 10 minutes, if it doesn't boot up/bootloop. Or shows DM-Verity corrupt error then do this.
1) Try boot into stock recovery by pressing volume up + power button after that when your screen flashes quickly unpress buttons.
2) Now press volume down + power button, by pressing these you will boot into stock recovery.
3) Go to format option and do a full format.
4) Your phone will definitely boot up after that.

Hi
I would like to ask how you obtained the system for realme 8 in the latest version.
Can you download somehow from your device?

HowWof said:
Hi
I would like to ask how you obtained the system for realme 8 in the latest version.
Can you download somehow from your device?
Click to expand...
Click to collapse
From realme offical site

Could you send a link because there is no information on the Polish realme site

HowWof said:
Could you send a link because there is no information on the Polish realme site
Click to expand...
Click to collapse
Realme 8 Firmware (RMX3085) - Realme Firmware
Realme 8 Firmware RMX3085 Official Flash File (Stock ROM). flash your phone using realme flashtool or MSM Download tool.
realmefirmware.com

if "Brick" occured in rooting process - then can recovery be done without data loss :
Prerequisite: firmware version on the body must the same as downloaded "Decrypted OFP" (as example both is A.22 )
HowTo:
at step of SPFlashing (currently that is 10-th)
- check ONLY next partitions in SPFlash to restore :
PRELOADER RECOVERY VBMETA LK LK2 BOOT
... and NO any of other
(as thats only are touched by currently described rooting processes)

after recovery exist on every boot:
"dm-verify corrupted..."
how to get out of this message?
Reset with clearing data not helps ...

DaLiV said:
after recovery exist on every boot:
"dm-verify corrupted..."
how to get out of this message?
Reset with clearing data not helps ...
Click to expand...
Click to collapse
Wait for 10mins if it didn't boot then.
Format with mtk client
python mtk e metadata,userdata,md_udc

that boots ... BUT
on every boot thet alerts about "corruption"
ok cleared partitions with python...
still the same alert ...

DaLiV said:
that boots ... BUT
on every boot thet alerts about "corruption"
ok cleared partitions with python...
still the same alert ...
Click to expand...
Click to collapse
Try booting into stock recovery and format from there

Ok. format from recovery menu solves ...
now that boots normally =
- no alert
-no boot allowing by pressing key required
good behaviour to see when boot subsystem altered, as at every boot alerted and required to press longer power button to confirm/allow starting ...
interesting, that is something new on mine (device versions) or overall ...

I have it anyway. have you solved it yet? Do I understand correctly?

after doing the insstruction, mine bootlooping and enters recovery mode

XCentrialG said:
after doing the insstruction, mine bootlooping and enters recovery mode
Click to expand...
Click to collapse
Maybe you missed some step. Can u explain ur problem briefly. What u did and what happened.

niki.rsb said:
I have it anyway. have you solved it yet? Do I understand correctly?
Click to expand...
Click to collapse
I Think that is not so solvable /possible if someone decode debug and finds /... but that is quite acceptable for rooting /if you don't want to make illegal spionage and so on/ ... also as if your device will be rooted by someone - you will see alert of changes on boot ... that is good ...
if you are rooted - you must be alerted .
but if you will going to stock rom and have protection - then flashing "stock" (surely without 3 partitions that IMEI-and-so-on-related ) and then format from recovery menu helps return to "factory" operation

Tony Stark said:
Maybe you missed some step. Can u explain ur problem briefly. What u did and what happened.
Click to expand...
Click to collapse
just a casual day to update my firmware, reboot and my phone refused to boot anymore, and then i came here, following all the steps very carefully (i read every steps twice so i dont make any mistake), and no luck.

XCentrialG said:
just a casual day to update my firmware, reboot and my phone refused to boot anymore, and then i came here, following all the steps very carefully (i read every steps twice so i dont make any mistake), and no luck.
Click to expand...
Click to collapse
There should be some mistake in your process. Because this guide is working and tested by many people.

Does global firmware have realme dialer instead of google dialer?
Can I flash Global firmware my indian device?

on your firmware package, it does not flashes super.img by default. Because in scatter file
- partition_index: SYS48
partition_name: super
file_name: super.img
is_download: false
changing false to true helps fixing destroyed super partition

How To Guide [UPDATED] [REALME 8i/NARZO 50] How to get fastboot access and root your device easily.

Hello everyone! In this guide, I Sidharth will tell you how to flash recovery, root and access bootloader on the Realme 8i and Narzo 50, you probably have seen another guide by Pritish, it's not wrong but it became kind of outdated .
So lets begin,
Requirements:
PC (with windows or linux installed)
Platform tools installed
First unlock the bootloader by following this guide: http://telegra.ph/HOW-TO-UNLOCK-BOOTLOADER-REALME-8INARZO-50-05-08
Or this guide: https://forum.xda-developers.com/t/...-flash-twrp-and-root-rmx3151-rmx3286.4369399/ (dont worry about the boot imgs, just unlock the bootloader normally and boot the phone, don't go on the second step)
So after doing that, you should have platform tools and adb drivers installed, I am not going to tell you how to do that exactly but you should find tons of tutorials on the internet for both linux and windows. (I am going to be using Linux in this case but everything is the same for both windows and linux in this case)
Download this file: https://drive.google.com/file/d/13J2zlrUz84ZDSPERdosgNO6xdhwah4hl/view?usp=sharing
and paste it in your mtkclient folder (you should have that by now if you already unlocked the bootloader.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Open the terminal and then type: python mtk w lk lk.bin
Now, power off your phone, hold both volume buttons and until it is done
Check if the phone boots into fastboot by holding volume down and power.
If it shows something like this then congrats, you have fastboot access now.
Flashing recovery is very easy now.
Download TWRP image from the TWRP website: https://twrp.me/realme/realme8i.html
Just keep it in the platform tools folder for now.
Boot into your phone, and download the magisk apk from here: https://github.com/topjohnwu/Magisk/releases
After downloading it, download ZArchiver from the Play Store and replace .apk with .zip and save it.
Now power off the phone and boot into fastboot/bootloader.
Open the terminal inside platform tools and:
fastboot flash recovery recovery.img
fastboot reboot recovery
You will be in your custom recovery now .
Now goto install, and select your magisk zip, and flash it normally.
After that is done, reboot to system and rename the magisk zip to apk again and install the apk.
Boom you have also rooted your device .
Thanks to Pritish for bootloader unlock guide and patched lk

also guys please let me know if you have any problems

here is how you can setup mtkclient on linux:
git clone https://github.com/bkerler/mtkclient
cd mtkclient
pip3 install -r requirements.txt
then you should have a mtkclient folder where u can execute the commands

bootloop on logo no way to fix hard to find how i can unbrick
the only thimg im able to do is on adb reflash the recovery and acces the Recovery TWRP but no way to acces the system

suauvia said:
bootloop on logo no way to fix hard to find how i can unbrick
the only thimg im able to do is on adb reflash the recovery and acces the Recovery TWRP but no way to acces the system
Click to expand...
Click to collapse
Just like bootloader unlock method, in MTK Tools, give this command:
#
python mtk e metadata,userdata,md_udc
#
(Without #)
Then connect your phone in BROM mode, then restart. it will be fine

suauvia said:
bootloop on logo no way to fix hard to find how i can unbrick
the only thimg im able to do is on adb reflash the recovery and acces the Recovery TWRP but no way to acces the system
Click to expand...
Click to collapse
be specific, did the lk file cause this or are you tryintg to unbrick through fastboot
if the lk caused this then tell me if you are on realme ui 3.0 or you are a narzo 50 user.

Sidharth09 said:
be specific, did the lk file cause this or are you tryintg to unbrick through fastboot
if the lk caused this then tell me if you are on realme ui 3.0 or you are a narzo 50 user.
Click to expand...
Click to collapse
thanks for your help but after doing so
python mtk e metadata,userdata,md_udc
nothing ha changed stil on realme logo and orange state and 5 seconds message and reloop reboot again
i was on UI 2,0 and updated firmware RMX3151 11.A_46
no idea if Lk make this
i have reflashed the stock recovery and format data also with TWRP recovery format data and cache but always on any move its a reloop reboot on Realme logo
-------
if i relock the bootloader ist possible to recover this phone and then how i can do this
im 67 old and not very used to this kind of operations

heroksiddiqi said:
Just like bootloader unlock method, in MTK Tools, give this command:
#
python mtk e metadata,userdata,md_udc
#
(Without #)
Then connect your phone in BROM mode, then restart. it will be fine
Click to expand...
Click to collapse
python mtk e metadata,userdata,md_udc
doneand nothing has changed

Is there a way to do this on a Mac? I have Realme 8i RMX3151 but do not have access to a Windows computer. Thank you.
I tried the Deep Testing App and it gives the following error "Failed to submit application. This phone model does not support deep testing."

suauvia said:
thanks for your help but after doing so
python mtk e metadata,userdata,md_udc
nothing ha changed stil on realme logo and orange state and 5 seconds message and reloop reboot again
i was on UI 2,0 and updated firmware RMX3151 11.A_46
no idea if Lk make this
i have reflashed the stock recovery and format data also with TWRP recovery format data and cache but always on any move its a reloop reboot on Realme logo
-------
if i relock the bootloader ist possible to recover this phone and then how i can do this
im 67 old and not very used to this kind of operations
Click to expand...
Click to collapse
u can always flash your stock LK again if it somehow made a problem so here
paste it in mtkclient and then
python mtk w lk lk.img
check if it fixes it!

jack1192 said:
Is there a way to do this on a Mac? I have Realme 8i RMX3151 but do not have access to a Windows computer. Thank you.
I tried the Deep Testing App and it gives the following error "Failed to submit application. This phone model does not support deep testing."
Click to expand...
Click to collapse
with mac it is not possible since mtkclient does not work on a mac

Sidharth09 said:
u can always flash your stock LK again if it somehow made a problem so here
paste it in mtkclient and then
python mtk w lk lk.img
check if it fixes it!
Click to expand...
Click to collapse
not working even worst even on fastboot it blocks about nserie decrypt or something like not remember well now i remake the process and get back to locked reboot on logo --- i would ask if i am on TWRP recovery and i want to flash a 7z firmware on .ofp files or a decrypted zip file do you think it will work ??
anyway trying to copy the 6 giigas firmware zip to an SD card the pc say that is too big to copy so maybe thru fastboot i can copt to the phone but i dont know about the command if you know about please let me know about the procedure if is positive way
or ist it any other way to recover the phone ??
finally i would like to install a Lineage customrom

suauvia said:
not working even worst even on fastboot it blocks about nserie decrypt or something like not remember well now i remake the process and get back to locked reboot on logo --- i would ask if i am on TWRP recovery and i want to flash a 7z firmware on .ofp files or a decrypted zip file do you think it will work ??
anyway trying to copy the 6 giigas firmware zip to an SD card the pc say that is too big to copy so maybe thru fastboot i can copt to the phone but i dont know about the command if you know about please let me know about the procedure if is positive way
or ist it any other way to recover the phone ??
finally i would like to install a Lineage customrom
Click to expand...
Click to collapse
finally i follow instructions on this link
[GUIDE][UNBRICK] Realme 8i/Narzo 50 Unbrick Free without Auth [RMX3151][RMX3286]
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX3151 (Realme 8i) and RMX3286...
forum.xda-developers.com
[GUIDE][UNBRICK] Realme 8i/Narzo 50 Unbrick Free without Auth [RMX3151][RMX3286]​all well now
thanks your guide to unlock the bootloader works a charm no success with other ones

Sidharth09 said:
Hello everyone! In this guide, I Sidharth will tell you how to flash recovery, root and access bootloader on the Realme 8i and Narzo 50, you probably have seen another guide by Pritish, it's not wrong but it became kind of outdated .
So lets begin,
Requirements:
PC (with windows or linux installed)
Platform tools installed
First unlock the bootloader by following this guide: http://telegra.ph/HOW-TO-UNLOCK-BOOTLOADER-REALME-8INARZO-50-05-08
Or this guide: https://forum.xda-developers.com/t/...-flash-twrp-and-root-rmx3151-rmx3286.4369399/ (dont worry about the boot imgs, just unlock the bootloader normally and boot the phone, don't go on the second step)
So after doing that, you should have platform tools and adb drivers installed, I am not going to tell you how to do that exactly but you should find tons of tutorials on the internet for both linux and windows. (I am going to be using Linux in this case but everything is the same for both windows and linux in this case)
Download this file: https://drive.google.com/file/d/13J2zlrUz84ZDSPERdosgNO6xdhwah4hl/view?usp=sharing
and paste it in your mtkclient folder (you should have that by now if you already unlocked the bootloader.)View attachment 5682939
Open the terminal and then type: python mtk w lk lk.bin
View attachment 5682941
Now, power off your phone, hold both volume buttons and until it is done
View attachment 5682943
Check if the phone boots into fastboot by holding volume down and power.
If it shows something like this then congrats, you have fastboot access now.View attachment 5682945
Flashing recovery is very easy now.
Download TWRP image from the TWRP website: https://twrp.me/realme/realme8i.html
Just keep it in the platform tools folder for now.
Boot into your phone, and download the magisk apk from here: https://github.com/topjohnwu/Magisk/releases
After downloading it, download ZArchiver from the Play Store and replace .apk with .zip and save it.
Now power off the phone and boot into fastboot/bootloader.
Open the terminal inside platform tools and:
fastboot flash recovery recovery.img
fastboot reboot recovery
You will be in your custom recovery now .
Now goto install, and select your magisk zip, and flash it normally.
After that is done, reboot to system and rename the magisk zip to apk again and install the apk.
Boom you have also rooted your device .
Thanks to Pritish for bootloader unlock guide and patched lk
Click to expand...
Click to collapse
now I cannot turn on my phone after try to access recovery :/

hoangnguyen320 said:
now I cannot turn on my phone after try to access recovery :/
Click to expand...
Click to collapse
i holded power button for 5 minutes...

hoangnguyen320 said:
i holded power button for 5 minutes..
Click to expand...
Click to collapse
volume up and power?

Sidharth09 said:
Hello everyone! In this guide, I Sidharth will tell you how to flash recovery, root and access bootloader on the Realme 8i and Narzo 50, you probably have seen another guide by Pritish, it's not wrong but it became kind of outdated .
So lets begin,
Requirements:
PC (with windows or linux installed)
Platform tools installed
First unlock the bootloader by following this guide: http://telegra.ph/HOW-TO-UNLOCK-BOOTLOADER-REALME-8INARZO-50-05-08
Or this guide: https://forum.xda-developers.com/t/...-flash-twrp-and-root-rmx3151-rmx3286.4369399/ (dont worry about the boot imgs, just unlock the bootloader normally and boot the phone, don't go on the second step)
So after doing that, you should have platform tools and adb drivers installed, I am not going to tell you how to do that exactly but you should find tons of tutorials on the internet for both linux and windows. (I am going to be using Linux in this case but everything is the same for both windows and linux in this case)
Download this file: https://drive.google.com/file/d/13J2zlrUz84ZDSPERdosgNO6xdhwah4hl/view?usp=sharing
and paste it in your mtkclient folder (you should have that by now if you already unlocked the bootloader.)View attachment 5682939
Open the terminal and then type: python mtk w lk lk.bin
View attachment 5682941
Now, power off your phone, hold both volume buttons and until it is done
View attachment 5682943
Check if the phone boots into fastboot by holding volume down and power.
If it shows something like this then congrats, you have fastboot access now.View attachment 5682945
Flashing recovery is very easy now.
Download TWRP image from the TWRP website: https://twrp.me/realme/realme8i.html
Just keep it in the platform tools folder for now.
Boot into your phone, and download the magisk apk from here: https://github.com/topjohnwu/Magisk/releases
After downloading it, download ZArchiver from the Play Store and replace .apk with .zip and save it.
Now power off the phone and boot into fastboot/bootloader.
Open the terminal inside platform tools and:
fastboot flash recovery recovery.img
fastboot reboot recovery
You will be in your custom recovery now .
Now goto install, and select your magisk zip, and flash it normally.
After that is done, reboot to system and rename the magisk zip to apk again and install the apk.
Boom you have also rooted your device .
Thanks to Pritish for bootloader unlock guide and patched lk
Click to expand...
Click to collapse
you can already do this using fastbootd

How to install usbdk in linux? I am using archlinux.

Sidharth09 said:
volume up and power?
Click to expand...
Click to collapse
just power , i tried all vl and pwer
and the battery was 90%

kawsarahmed369 said:
How to install usbdk in linux? I am using archlinux.
Click to expand...
Click to collapse
u dont need those for linux

[ROM] [Android 11] Stock System, Recovery and Boot for Alcatel 1 2021 5033F Android 11

WARNING: I am not responsible for any bricked devices, dead SD cards, or a thermonuclear war!
Click to expand...
Click to collapse
Hello There!​
I have succesfully dumped the system, recovery and boot partition of the Alcatel 1 2021.
So if you need to reinstall your system or recovery for some reason here is how to do it.
Things you will need​
Install MTK Client following the instructions found here
Unlock your devices bootloader:
Open a command promt window in the folder where your MTK Client is​Power OFF your device​Remove the battery​Type the following command: python mtk da seccfg unlock then press enter​After that plug in the USB cable​After it finishes put back the battery, restart your device and your bootloader should be unlocked​
Now that your devices bootloader is unlocked when you turn ON your device you will need to press the power button within 5 seconds or your device will POWER OFF
Install the files​
Install System:
Open a command promt window in the folder where your MTK Client is​Power OFF your device​Remove the battery​Type the following command: python mtk w system system.img then press enter​After that plug in the USB cable​After it finishes put back the battery, restart your device and your system should be installed​
Install Recovery:
Open a command promt window in the folder where your MTK Client is​Power OFF your device​Remove the battery​Type the following command: python mtk w recovery recovery.img then press enter​After that plug in the USB cable​After it finishes put back the battery, restart your device and your recovery should be installed​
Install Boot (Kernel):
Open a command promt window in the folder where your MTK Client is​Power OFF your device​Remove the battery​Type the following command: python mtk w boot boot.img then press enter​After that plug in the USB cable​After it finishes put back the battery, restart your device and your boot (kernel) should be installed​
DOWNLOAD​
system.img
recovery.img
boot.img
If you have any questions, problems or you know how to build/port TWRP for this device feel free to comment or PM me

Hello , is the fm radio enabled in this rom?

DJ HAPPY said:
Hello , is the fm radio enabled in this rom?
Click to expand...
Click to collapse
I dont think it is

Hello. I spend much time to unlock bootloader. Only yours method was usefull.
Thanks for your time.
But after that i got bootloop
i've installed your files:
system.img
recovery.img
boot.img
any idea please?

oh00 said:
Hello. I spend much time to unlock bootloader. Only yours method was usefull.
Thanks for your time.
But after that i got bootloop
i've installed your files:
system.img
recovery.img
boot.img
any idea please?
Click to expand...
Click to collapse
Hi! Your problem might be that you dont press the power button when your device promts you to do so (after you unlocked the bootloader you will always need to press the power button when the device is turning on). If you do press it and your device still boot loops you should try to factory reset your phone. If none of these work for your, one of the phones partitions might be corrupt.

NDXCode said:
Hi! Your problem might be that you dont press the power button when your device promts you to do so (after you unlocked the bootloader you will always need to press the power button when the device is turning on). If you do press it and your device still boot loops you should try to factory reset your phone. If none of these work for your, one of the phones partitions might be corrupt.
Click to expand...
Click to collapse
I did everything with your manual.
Everything was OK. I pressed power button when was asked.
After 3 files uploading I was made a factory reset in stock recovery. But got some errors. I've rebooted to recovery again and there were no more errors.
But it's still bootloop.
Is your software for OT 5033F version?

oh00 said:
I did everything with your manual.
Everything was OK. I pressed power button when was asked.
After 3 files uploading I was made a factory reset in stock recovery. But got some errors. I've rebooted to recovery again and there were no more errors.
But it's still bootloop.
Is your software for OT 5033F version?
Click to expand...
Click to collapse
I think I found your problem, you have an Alcatel 1 2021 5033FR (says on the top of your recovery) while the software I posted is for the Alcatel 1 2021 5033F. The two phones are different.

looks like you are right. I thought there are no difference between
5033D
5033F
5033FR
but there are differences
Your recovery from 5033F is working. So im able to boot recovery only. Any ideas where can i find any working software for 5033FR? i tried to google but no luck. Now i got working UNLOCKED bootloader with working recovery. But i got bootloop. The goal was just unlock the botloader. I spend 2 days for it. Thats why i really apriciate your time.

NDXCode said:
I think I found your problem, you have an Alcatel 1 2021 5033FR (says on the top of your recovery) while the software I posted is for the Alcatel 1 2021 5033F. The two phones are different.
Click to expand...
Click to collapse
i downloaded from HardReset.info: 1 2019 OT-5033F
MT6739 TCL Alcatel 1 2019 OT-5033F RP1A.200720.011 macau vRB3V 20220411
but i cant flash it using SP flash tools
i got error
status_bdrom_cmd_send_da_fail
when i try to flash
python mtk w system system.img
python mtk w recovery recovery.img
python mtk w boot boot.img
from that firmware i downloaded from HardReset.info i got same bootloop
should i try to upload all ~30 files using
python mtk w ..... ?
like
python mtk w dtbo dtbo.img
python mtk w efuse efuse.img
python mtk w gz gz.img
python mtk w loader_ext loader_ext.img
python mtk w simlock simlock.img
python mtk w super super.img
python mtk w swversion swversion.img
....
im not sure

oh00 said:
i downloaded from HardReset.info: 1 2019 OT-5033F
MT6739 TCL Alcatel 1 2019 OT-5033F RP1A.200720.011 macau vRB3V 20220411
but i cant flash it using SP flash tools
i got error
status_bdrom_cmd_send_da_fail
when i try to flash
python mtk w system system.img
python mtk w recovery recovery.img
python mtk w boot boot.img
from that firmware i downloaded from HardReset.info i got same bootloop
should i try to upload all ~30 files using
python mtk w ..... ?
like
python mtk w dtbo dtbo.img
python mtk w efuse efuse.img
python mtk w gz gz.img
python mtk w loader_ext loader_ext.img
python mtk w simlock simlock.img
python mtk w super super.img
python mtk w swversion swversion.img
....
im not sure
Click to expand...
Click to collapse
The ROM you attached is for the Alcatel 1 2019 and not for the Alcatel 1 2021. Again they are also not the same phone.

NDXCode said:
The ROM you attached is for the Alcatel 1 2019 and not for the Alcatel 1 2021. Again they are also not the same phone.
Click to expand...
Click to collapse
looks like there is no place in the internet to download stock firmware.
if i will buy the same phone will i be able to read stock firmware using
Spoiler: spoiler
python mtk r proinfo,nvram,boot_para,recovery,swversion,para,oempersist,expdb,frp,vbmeta,vbmeta_system,vbmeta_vendor,nvcfg,nvdata,protect1,protect2,persist,metadata,oembin,seccfg,sec1,efuse,md1img,md1dsp,spmfw,mcupmfw,gz1,gz2,lk,lk2,loader_ext1,loader_ext2,boot,vendor_boot,logo,dtbo,tee1,tee2,simlock,super,odm,product,vendor,system,preload,oem,cache,userdata,otp,flashinfo
to backup all stock partitions
and then write it to bootlooped?

oh00 said:
looks like there is no place in the internet to download stock firmware.
if i will buy the same phone will i be able to read stock firmware using
Spoiler: spoiler
python mtk r proinfo,nvram,boot_para,recovery,swversion,para,oempersist,expdb,frp,vbmeta,vbmeta_system,vbmeta_vendor,nvcfg,nvdata,protect1,protect2,persist,metadata,oembin,seccfg,sec1,efuse,md1img,md1dsp,spmfw,mcupmfw,gz1,gz2,lk,lk2,loader_ext1,loader_ext2,boot,vendor_boot,logo,dtbo,tee1,tee2,simlock,super,odm,product,vendor,system,preload,oem,cache,userdata,otp,flashinfo
to backup all stock partitions
and then write it to bootlooped?
Click to expand...
Click to collapse
But if you flash all the partitions the phones IMEI number will corrupt.

NDXCode said:
But if you flash all the partitions the phones IMEI number will corrupt.
Click to expand...
Click to collapse
the main goal was to change imei. now i spent too much time for this stupid procedure