I have the February 2021 update installed on the global variant of the Razer phone 2 and everytime I connect it to my computer it says that the computer can't recognize it
I have tried connecting it to my other computers as well and it gives the exact same issue even on fastboot mode.
I tried different chargers, ports, windows 10/11, resetting the device many times, downloading the USB driver for it many times, reinstalling platform tools, many times, resetting my computer, updating all my driver's after resetting my pc,
I've tried my other phones and they work fine with all of my computers no hassal at all but I can't get the Razer phone to work.
I have USB debugging enabled but when I connect to the computer it doesn't show the notification on the phone but it is charging.
Please help I really don't know what else to try.
wasup.. im having this problem right now. exccept for me. my usb charger port went out so i replaced it. and its only charging for me now. my computer wont beep when its plugged in, doesnt even recognize it . it just charges. u ever figure it out? have u replaced ur charger port at all? that could be the issue maybe it not a factory part or somethin.
Yea eventually I just figured out that my USB port was bad and I just pushed the charger in and it worked you just gotta press the charger in and make sure you have a good charger that won't slip out easy.
Also if you're trying to debug make sure you check each port for the best one
Cylow333 said:
Yea eventually I just figured out that my USB port was bad and I just pushed the charger in and it worked you just gotta press the charger in and make sure you have a good charger that won't slip out easy.
Also if you're trying to debug make sure you check each port for the best one
Click to expand...
Click to collapse
oh , yah no ive tried all that. aint make a diff. i thinking bou finding a cheap one on ebay to take off the charger. and redo the root and update to newest Firmware then re root it. n change back the newer part
Related
So, after messing around with AC Sideload Wonder Machine installing a bunch of apps, something happened and now I can't mount my Captivate to my computer. When I plug the USB into the PC, it momentarily shows "Charging" on BattStatt, but then it goes away immediately and the phone does not show an option to mount nor does it charge the phone.
I have the USB settings set to Mass Storage and USB debugging off. I've tried a different computer and nothing. USB drivers have been installed.
For some reason, it charges the phone if I plug it into the wall.
Did I damage the cable? Did I corrupt some system files? Any advice? Thanks in advance.
Edit: Not rooted, stock android 2.1. I've tried uninstalling/reinstalling the USB drivers. Doesn't help.
Did you try enabling usb debugging again?
Sent from my Captivate
curti.nogg said:
Did you try enabling usb debugging again?
Sent from my Captivate
Click to expand...
Click to collapse
Yeah, that doesn't do anything either.
D'oh, just went through this too. Been a while I guess since I'd done it. You have to open the notification bar and select the "copy files for USB" option.
ADS
try using another cable, if it doesn't work, look into possibly master reset. If not that, try one click downloader reset.
bedwa said:
try using another cable, if it doesn't work, look into possibly master reset. If not that, try one click downloader reset.
Click to expand...
Click to collapse
I just tried another cable on another PC and it sort of works if I jiggle it a bit - I'm able to maintain a connection and transfer files, and it charges as well. I'm starting to think the USB port on the my phone may be defective.
My usb port was a little bent on my phone, after one of my sons tried to disconnect the cable sideways rather than straight. I just adjusted the outer parts very carefully with small pliers, and also bent the inner contact slightly. After that I had no more problems with charging, just be careful! Maybe that could help you, mrpibb?
Also make sure your USB slider door is fully open. It will "click" when fully open or closed.
axis01 said:
Also make sure your USB slider door is fully open. It will "click" when fully open or closed.
Click to expand...
Click to collapse
Yeah, it's fully opened. Using the cable that came with the phone, it never works. Using a different cable, it sometimes works. The weird thing is that it charges fine via AC adapter when its plugged into the wall.
mrpibb said:
Yeah, it's fully opened. Using the cable that came with the phone, it never works. Using a different cable, it sometimes works. The weird thing is that it charges fine via AC adapter when its plugged into the wall.
Click to expand...
Click to collapse
Spitballing here but it might not be the cable but the adapter on the phone.
Pins 1 and 5 (power) might be ok but either pin 2 or 3 (data) could be defective on the phone.
cappysw10 said:
Spitballing here but it might not be the cable but the adapter on the phone.
Pins 1 and 5 (power) might be ok but either pin 2 or 3 (data) could be defective on the phone.
Click to expand...
Click to collapse
That's my fear as well. I'm screwed?
Yesterday, the phone stopped charging. I thought the car charger is bad , so I plugged it in the home charger, still no charging, so I took out the battery. When I powered it on, I got a yellow screen with a little android digging with a shovel with words "Downloading, Do not turn off target". No matter what button combination I press, I can only get this screen to come up.
I have tried to do a hard reset several times, no luck, downloaded and installed drivers and did one click restore (I897UCJF6-final-OCD) , the phone is not seen by the software, have tried all usb ports ad different cables. also restarted laptop and reconnected with/without battery, still the same situation.
Phone was upgraded to official 2.2 update several months back and was hard reset once after that.
It seems, it is not getting power /connection from USB port since as soon as I take out battery, it dies even though it is connected to the USB port.
Any help is appreciated.
Thanks
The phone shouldn't stay on, even on USB, when you take out the battery. That's normal.
As far as getting it to connect, take a look at the "Captivate Connection Issues" thread in my signature. There should be something in there to help you out.
Thanks, I had looked at it earlier before posting too. Will have to try it out later in the day and report back.
I have tried the following with various combinations:
Laptop with win 7 64 bit and samsung drivers one click uploader and samsung usb cable, same cable with win xp desktop 32 bit with several attempts at rear usb ports. Have also tried to get the phone recognized by rebooting the laptop and desktop, but no luck.
Any direction to atleast able to see the phone?
Thanks
Do you have Kies instaled in your PC? Maybe it can help you! When you´re having problems with drivers just download Kies, it will download and instal them for you... Also try this it was helpful for me when I had softBrick...
http://sobreandroid.com/5469/como-i...od-recovery-en-el-samsung-captivate-sgh-i897/ (Is in Spanish so if you need something tell me)
Thanks for the tip. I will try and post the results.
in addition to different ports, maybe try a different pc, unless you have successfully connected cappy via usb to your laptop before.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
So, every time I connect my Moto X to my Windows Laptop via USB, it always keeps plugging and unplugging itself as if I was doing it. The phone icon appears and it begins to try and load the memory storage and then it just vanishes and "unplugs itself". As of now, I just unplug the USB cable from one slot of the laptop and then insert it in another, and it fixes the issue.
Now, that doesn't work either. What's the problem and how can I fix it?
Chances are it's one of a few things.
Bad cable. Bad ports on laptop. Or the port on your phone.
I'd start with some different cables.
Then try a different pc.
If it's the phone, then that's a problem. The phone ports are fragile. My daughters Gtab3 has a wonky port, cause I'm sure the plastic tab was snapped by her using the tablet while it's plugged in. So now to charge it, it will only work sitting still on whatever and I have to jiggle the cable to get it just right. It's only help by the wires inside now.
KJ said:
Chances are it's one of a few things.
Bad cable. Bad ports on laptop. Or the port on your phone.
I'd start with some different cables.
Then try a different pc.
If it's the phone, then that's a problem. The phone ports are fragile. My daughters Gtab3 has a wonky port, cause I'm sure the plastic tab was snapped by her using the tablet while it's plugged in. So now to charge it, it will only work sitting still on whatever and I have to jiggle the cable to get it just right. It's only help by the wires inside now.
Click to expand...
Click to collapse
I repaired the Moto X Device Manager and now I'm using a different cable. So far. so good. I'll report back in a few days to see if anything changes.
Guys please help me out I am in serious problem.
I have an international M7 with developer ROM on it. Till yesterday everything was 100% fine. But this morning when I tried to charge it, it gave me an error saying use a supported charger. I have been using the original charger from the beginning. And since then no other chargers are able to charge it. No error message no nothing.
When I try to charge it while powered off it shows "charging" for 1 second and powers down, then again powers back on saying "charging" and this keeps going on n on.
I tried using an OTG flash drive and its working perfectly. Device is powering on without any problem what so ever. Its just not charging. Its also not getting detected by computer.
Please help me out!
:crying:
Interestingly enough, I had this problem last night.
The first time I plugged it in, I got the error about using a supported charger but i simply just unplugged it and replugged it in and everything was fine.
So... I don't really have a solution, sorry.
I'm on InsertCoin 4.0.2 on a Dev Edition M7
AndrewAmazed said:
Interestingly enough, I had this problem last night.
Click to expand...
Click to collapse
I think we have different definitions for the word interestingly...
But seriously guys need help urgently!
BUMP!
have you tried another usb cable? the cable that came with my nexus 4 broke and always connected and disconnected so it wasnt able to charge.
vollmilch said:
have you tried another usb cable? the cable that came with my nexus 4 broke and always connected and disconnected so it wasnt able to charge.
Click to expand...
Click to collapse
Tried 4 different chargers and cables bro...
rachitboom2 said:
Tried 4 different chargers and cables bro...
Click to expand...
Click to collapse
you also tried charging from your pc's usb port?
if a factory reset and another outlet doesnt work then i'd consider contacting htc..
vollmilch said:
you also tried charging from your pc's usb port?
if a factory reset and another outlet doesnt work then i'd consider contacting htc..
Click to expand...
Click to collapse
Its not charging or even getting detected on a PC as already mentioned and HTC CC is charging me 150$ for repairing :crying:
In fact they are charging the first 100$ just for opening the device. Huh...
Cant factory reset, very little battery is left so big risk. Is there no one else who has faced this problem ?
Again reminding you, OTG does still work...
rachitboom2 said:
Its not charging or even getting detected on a PC as already mentioned and HTC CC is charging me 150$ for repairing :crying:
In fact they are charging the first 100$ just for opening the device. Huh...
Cant factory reset, very little battery is left so big risk. Is there no one else who has faced this problem ?
Again reminding you, OTG does still work...
Click to expand...
Click to collapse
The OTG still working has nothing to do with charging
their are 4 conncetions inside that usb port you need 2 of them to charge the other 2 for data. You say you cleaned the port.
Define cleaned the port.
I had a Samsung (same microusb port) stop being seen by PC or charging. I shut the phone off and used a paper towel folded to a point on one end, and dipped in rubbing alcohol. I inserted this into the port and let it set about 1 min. Removed it and folded the towel again and inserted the dry end. After 3 attempts at this the charger and data ports all work again. give it a shot.
rachitboom2 said:
Guys please help me out I am in serious problem.
I have an international M7 with developer ROM on it. Till yesterday everything was 100% fine. But this morning when I tried to charge it, it gave me an error saying use a supported charger. I have been using the original charger from the beginning. And since then no other chargers are able to charge it. No error message no nothing.
When I try to charge it while powered off it shows "charging" for 1 second and powers down, then again powers back on saying "charging" and this keeps going on n on.
I tried using an OTG flash drive and its working perfectly. Device is powering on without any problem what so ever. Its just not charging. Its also not getting detected by computer.
Please help me out!
:crying:
Click to expand...
Click to collapse
I faced a similar problem while I installed cm11 nightly version. I resolved my problem by letting it charge for 9-10 hours in power off mode. It worked for me.
So I'm having issues.
As of right now I don't really know what the problem is.
My phone will not connect to my PC anymore. It doesn't say "Connected as a media device" or anything.
I can't connect it to my PC with Odin in download mode either
My phone will not charge anymore (Using Ampere, it charges at about 220mA. It'll go all the way down to 10mA and for 4 seconds or so it'll be at a high mA like 470mA)
It is not my charging brick (I've used Three and I tested them on my other phones, the bricks work fine)
It is not my charging cable (I've used several, and again, I've tested with my other devices and it works flawlessly)
It is not my battery, I have 4 and I've switched between them all
It isn't my PC (I reinstalled all the drivers, and it worked with my Note 3 immediately)
I've tried pushing the cable down while plugged in, and up. It doesn't do anything.
My ROM that I'm running: Maximum OvrDriVE, it is a Note 5 port. Android 5.1.1, with xposed.
My kernel is Emotion r23. I'm on DOK2 baseband.
I've reflashed this ROM, and PacRom. Same issues.
I've flashed different kernels. Same issue.
Right now I'm going to try to go back to a different ROM that I was using that I know for a fact works fine.
(Tried it, it was Rapture 8.1, android 5.1.1, kernel: Emotion Kernel 5.1.1 r21. Nothing changed. Fast charging enabled, still said was being charged via USB when it was plugged into the wall. )
A physical inspection of my USB port on my phone, it looks fine.
I cleaned it too. Still, same issues.
So this only leads me to believe its a physical problem.
Can any of you guys help me out? Because I'm still not sure exactly what the problem is, and I need help
Its your phone, I had the same issue. Warrantied it through tmobile. Exact same problem. It is frustrating for sure.
rosedog said:
Its your phone, I had the same issue. Warrantied it through tmobile. Exact same problem. It is frustrating for sure.
Click to expand...
Click to collapse
Damn. Well, i thought so. I'm just going to replace the Micro-USB port then. That's less than $50 vs a new phone which is about $230
I don't have warranty. I bought it off amazon and it's been perfect up until now. I'm sure I caused the problem and 'll be careful not to do it again.
The scary thing is that I'm not 100% sure that it's the MicroUSB port. It can't really be anything else but I just don't want to buy this and then it turn out to be something else. I guess I'll have to try though.
So, update: Replaced USB Port.
Broke LCD Screen.
*sobbing in a corner*
Oh and it appears as if my USB Port doesn't work still (Same issue. It does work to a point but as of fast charging I dont know but when I turn it on and unlock it my comptuer doesnt recognize it)