Related
I am rooted but still using the stock ROM. I have two Bluetooth-enabled Pioneer head units and a Bluetooth adapter for my home stereo system with this issue, so I know it's not the other Bluetooth device that's the problem.
When I pair the other Bluetooth device, everything works fine until the Bluetooth device disconnects. I either leave the area with my One, or turn the car off. When I come back home or turn the car on, the One will not reconnect unless I manually turn Bluetooth off and turn it back on again. I don't have to redo the pairing, just cycle Bluetooth off and on. This gets really, really annoying with the car stereos because I have to do it every time I make a stop.
The weird thing is, I had the problem before and it went away when the KitKat update was released. Unfortunately it only worked for a few weeks because I sent my One in for the pink camera issue. I did a hard reset before sending it off and rooted it got back, and now the Bluetooth problem has returned even though it's still on 4.4.2.
Anyone know how to make this go away?
No one is having a similar problem or knows how to fix this?
Has anyone else been unable to make phone calls after connecting to your vehicle's bluetooth? Most of the time, I can make phone calls without issue. Sometimes, I can't even hear the call ring when I'm connected to bluetooth. Occasionally, when I turn my vehicle off, the call goes silent instead of transferring to the earpiece on the phone. The only way I can fix the issue is rebooting the phone. This has become increasingly frustrating for me, since the issue is so inconsistent.
I'm running the stock ROM, rooted and un-encrypted.
Thanks!
Same here
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I just got my N6 today and I'm having trouble with My Ford Touch as well. I can get it to pair and play music, but it won't "connect" to my phone. It's odd because my N5 works fine with it. I would assume the N6 wouldn't be different.
We probably have to wait for an update from Ford, which will probably take months...
EDIT: Well I decided to try it again. I deleted the Nexus 6 entry as well as the Nexus 5 entry. Went through the pairing process again and it worked as intended. Not sure what happened the first time.
I ran into the same problem as others where my N5 worked flawlessly with my Ford Sync in my fusion, but the N6 is terrible.
I love the phone, but this is really annoying. I get into the car and sometimes it connects immediately, other times I have to turn off and back on the bluetooth about 3 times for it to finally connect. Very weird. Ford offers an upgrade to my Sync system, but wants $50 to do the upgrade. Pass.
I might try what the other person did and delete all entries for phones and pair it again. Unfortunately, the weather is pretty bad outside, so it might need to wait a short bit.
Has anyone else had luck re-pairing with their car and had reliable connections?
I use Ford Sync.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I use Ford Sync, and everything works as expected. I am Stock and unrooted. I guess it would come down to what version of Sync. Mine is from 2012. No touch screen. I also delete all other entries on the system and start from scratch making sure that the N6 is the main device.
If I can wake up the screen on my own, outgoing calls work fine
PaisanNYC said:
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
Click to expand...
Click to collapse
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
androidfan91 said:
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
Click to expand...
Click to collapse
Since I last made that post you quoted, i purchased and installed a 2015 model of the Pioneer AVIC-8100NEX. It has Android Auto, but can be used with the regular Pioneer UI also. I have had no issues anymore with this new radio. Maybe the BT protocol in the radio is newer? Im not that tech savvy to know. But the 2015 radio had no issues with BT calls anymore, on Pioneer's UI or Android Auto's UI.
Anyone else haing issues here with bluetooth? I can connect to everything bluetooth, wireless speakers, car, headsets, watch etc. The only thing I can get to work reliably is the headset, everything else randomly cuts out or has issues. For example both cars have bluetooth for phone calls, one has bluetooth for media, I can get both to work for a short time but it either 1. Cuts out and reverts back to phone, freezes the system in the one car, or jumps back and forth between the 2. Similar results when connected to bluetooth speakers, can get it to work for about 10-15 minutes then nothing, phone shows it still connected and playing music but no sounds from speakers. LG G Watch R also randomly looses connection. I'm beginning to regret my switch from the S5.
Anyone having similar problems or a fix?? I really want to keep the phone but not sure I can deal with this flaw...........
I have no such issues with the bluetooth. I can tell you that I had bluetooth issues with one of my other android phones. I had to get it warranty replaced. My suggestion is that you get the phone replaced since its brand new.
Mine has been fine so far. I just wish that android was more like apple, as much as I hate to say that. Both my S6 and M7 will play phone audio fine when in a call, but to use maps I have to turn the radio to Bluetooth mode. Makes it kinda boring to ride with no radio just to get turn by turn nav.
Sent from my SM-G925V using XDA Free mobile app
I haven't had any issues with my smart watch (moto 360) but I have had some weird issues with my car's Kenwood media deck. The phone will connect to the unit, but 75% of the time no sound will come from the speakers on the first try. Sometimes just waiting about a minute does the trick, other times I turn BT off/on and it'll work fine the 2nd time. However because I haven't had any issues connecting with my watch, ear piece, or laptop I am willing to bet it's it an issue with the Kenwood and not the phone.
Thanks guys. Don't want to have to warranty swap it but looks like that's going to be my first step.
I previously owned a Sony Z3v and had no complaints. I run and workout regularly so I often use bluetooth headphones while doing so. These in particular http://www.plantronics.com/us/product/backbeat-fit. I'm been having issues since day 1 with these disconnecting. I have to power them down and power them up again to reconnect. Even when they lose connection, they show they are connected but are non responsive. I had not trouble whatsoever with my sony experia.
Anyone else having these kind of issues? I've checked the forums and I don't see any reports. Is this isolated?
I only use Bluetooth when I'm in the shower with the beats pill but it works great for me.
Sent from my SM-G925V using Tapatalk
Not entirely related but I have had issues with my original Galaxy Gear disconnecting somewhat frequently when I disconnect my BT head unit or at other seemingly random times that sometimes require me to turn BT off and on again. It's not that huge of an issue usually but BT on my S6 is not perfect for sure.
Sent from my Galaxy S6 Edge
I am having Bluetooth disconnect issues with my car. Will connect and disconnect repeatedly for about 7 minutes and then stay connected. Very annoying. Have tried several fixes but nothing has worked.
I haven't had an issue with mine when using it for my gopro.
The issue is with Android using Bluetooth 4.0 and WiFi simultaneously. I've had these issues since owning the phone. For whatever reason if you connect your phone to a bluetooth speaker where both devices are BT 4.0, the WiFi will be extremely slow or not work at all.
If you don't believe me, try it. As soon as you connect the device, try to load something like a video or song over WiFi. Or even send a Facebook message. It'll stall. As soon as it stalls, turn off WiFi and it'll magically start working again over cellular data.
No issues here, usually stream to a Bose Color Sound device, getting connection through WiFi
I have issues with mine pretty regularly with my car. A reboot of the phone will sometimes fix it. It's annoying, sometimes it will disconnect from audio but not phone or vice versa. Or it will work perfect, I'll get a phone call and it all goes to crap. The remainder of the drive will generally result in fighting with it. Maybe it will reconnect, but most of the time it won't. Never have I had a phone with so many bluetooth issues.
Had issues with my truck head unit / phone BT. Phone would continually disconnect.
Tracked it down to the Messages transferring to head unit.
If I disabled Messages in the Bluetooth / Allow Access To area, it worked fine, but obviously messages wouldn't go to my truck.
I cleaned all messaging apps, factory reset truck head unit, no fix. eventually factory reset the phone, havn't had any problems since.
Deuces said:
Had issues with my truck head unit / phone BT. Phone would continually disconnect.
Tracked it down to the Messages transferring to head unit.
If I disabled Messages in the Bluetooth / Allow Access To area, it worked fine, but obviously messages wouldn't go to my truck.
I cleaned all messaging apps, factory reset truck head unit, no fix. eventually factory reset the phone, havn't had any problems since.
Click to expand...
Click to collapse
Stopped working again.
I want to know why it won't run AA it says the phone has ANdroid 10, phone will work with steering wheel conrols, even messages will play on my car, BUT google maps will not load I get "no apps found" Then I llok and my and 10 shows no AA app. Soooooo I email maker we go back and forth finally they say phone not set up for AA, ok can someone answer why this is? Everything you expect from the phone works in car except GPS even screen mirror won't d/l on this phone I have. ok WHY??? what causes this? Is there a walk around? Will toto survive the trip home? he has no ruby slippers!!
Are you running AA on a head unit, or trying to run it only on the phone? What phone are you using? You are connected by USB?