format everything with no back up - Xiaomi Mi A2 / 6X Questions & Answers

I accidently format everything stock rom and all tried installing new rom with twrp rom zip shows successful install but at reboot option it shows no OS install Cant install any new rom HELP!!!!!!!!!!!!!!!

Related

[Q] Constant Boot Loops when trying to install new ROMs

I have CWM 4.00.15 installed and I tried to install Ryyu's Rom (Wipe) by putting it on the SD card and rebooting into recovery, then selecting the zip file and hitting apply. When the installation tried to update my kernel, it just froze and rebooted. I was then stuck on a boot loop between the Galaxy S screen and the CyanogenMod boot screen. I know that Ryyu's did not install correctly because the CyanogenMod boot screen was still there. I had to use 3 button recovery and erase cache, davlik cache and user data before trying to install AOSP Essence, but same problem happened. Installation dies and phone keeps rebooting in loops. Finally, gave up and went back to CyanogenMod Nightly and it worked.
Why can't I seem to install any other ROMs besides Cyanogen? I know I am doing something wrong, but not sure what. Any advice/help appreciated. Thanks.
Have you tried starting from a clean install?
Try starting with a stock rom and then to activate Cwm flash a modded Kernel.
Br1g0 said:
Have you tried starting from a clean install?
Try starting with a stock rom and then to activate Cwm flash a modded Kernel.
Click to expand...
Click to collapse
Hi,
this is what I initially did to get Cyanogen on:
1. Used Superoneclick root to root phone
2. Check that 3 button recovery and download mode works. Recovery version was 3e, so installed superlagfix from android market. This automatically installed ClockworkMod Recovery as well.
3. Use CWM and flashed recovery for Samsung Galaxy S i9000
4. Reboot into recovery and select the CyanogenMod zip file and click apply to install.
To install subsequent ROMs, I just put the zip file on my SD card, reboot into recovery and repeat step 4 above, after clearing cache and user data. It is after that I get stuck on boot loops.
I did do a Nandroid backup before my initial Cyanogen install so I can go back and restore it, but it would be Froyo.
when coming from CM / MIUI - Samsung based ROM
you MUST flash a 3 file firmware with pit and re-partition.
Cyanogen and MIUI use different partitions than samsung ROMs so this is why you are having issues.
Ok, just managed to flash Darky's EE 10.2 using Odin. Not sure if Odin is the ideal way, but it worked. Really enjoying Darky's. Thanks folks!

[Q] Cannot install any other .zip than original CyanogenMod

I had a friend help me with my CyanogenMod 10 install and everything was working fine. Now knowing how to get the boot.img and .zip installed, I thought I would try a few other ROMs as I see there is already a 4.2.2 (I had installed 4.1.2).
I did a wipe of data, cache, d.cache, system
I flashed new boot.img of CM 10.1 (http://forum.xda-developers.com/showthread.php?t=2343586)
I went into recovery to install the .zip and I got "E:Can't open /sdcard/cm-xxxxxx.zip (bad)"
I thought, okay **** it I'll just go back to 4.1.2 and it installs perfectly fine - gets me back into the phone. I even tried a different ROM from SlimBean or whatever and I get the same "(bad)"
What gives?
Seems like my SD card needed to be swapped out -- not sure why but works fine on a different card. I'll try formatting the other one..
Which recovery are you using? Btw make sure you are flashing the correct version of gapps right after flashing the rom zip

[Q] Problems after alliance v2.3 Android 4.3 installation

Hello there,
I've got a problem after installing the custom Rom alliance v2.3
I came from ripper Rom v20 which is based on Android 4.1.2 and everything was fine there.
Yesterday I installed alliance. I made it with the instruction guide in the alliance thread. That means I downloaded Rom customizer and twrp.
I wanted to use Rom customizer but when I pushed flash then I was gone to recovery mode. Then I did it directly with twrp and alliance was installed.
But now I have two directories for the intern storage. I think one from 4.1.2 and one for 4.3.
What can I do now to solve this problem?
My idea was to wipe the s3 lte completely. A complete system wipe and a factory reset. Should I do a boot format too? After the OS is gone and boot ist formatted can I flash the alliance Rom to my phone? With PC or directly on the phone, if possible? So that nothing from any old versions is left on the phone and a fresh alliance can be installed.
Sorry for my bad English. My school English is ten 8 years ago.
Thanks in advance
In recovery mounts and storage format system sdcard data and cache .
Phone is now blank boot to download mode flash stock rom via Odin .
Or from ext sdcard flash custom rom .
Thank you.
I will try it today.
Is it normal that when you go from 4.1.2 to 4.3 that user data is left on the phone but can't be reached through a Explorer? When I start in cwm and click flash from SD card I can choose my new storage and the old storage from before the update. When I start normally then I see only the best storage, doesn't matter which path I click. So now I . can't delete everything left from before the update.
Will this be gone after formatting data and SD card with cwm?
I thought with Odin you can only flash .tar files and no .zip files like alliance? What have I to do to get this working?
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743

[Q] Custom Roms not booting on my ZR

I unlocked my ZR's bootloader and tried installing these roms:
Carbon Rom
Beanstalk
LiquidSmooth
But after installing any of these, my phone wont boot completely.
It goes past the SONY screen and loads the animation of the rom that i flashed, the animation still goes on - it is not stuck.
This goes on for like half an hour and still does not go any further.
I will explain the steps i followed.
1. Unlocked bootloader
2. flashed the boot.img of the corresponding rom
3. booted to recovery -- vol up
4. Wipe data/ fac reset
5. wipe cache partition and Dalvik
6. installed the rom and rebooted
Is there anything else i am missing here ?
ajeesh.m said:
I unlocked my ZR's bootloader and tried installing these roms:
Carbon Rom
Beanstalk
LiquidSmooth
But after installing any of these, my phone wont boot completely.
It goes past the SONY screen and loads the animation of the rom that i flashed, the animation still goes on - it is not stuck.
This goes on for like half an hour and still does not go any further.
I will explain the steps i followed.
1. Unlocked bootloader
2. flashed the boot.img of the corresponding rom
3. booted to recovery -- vol up
4. Wipe data/ fac reset
5. wipe cache partition and Dalvik
6. installed the rom and rebooted
Is there anything else i am missing here ?
Click to expand...
Click to collapse
go in mounts & format system with all othe wipes
& try
+1 if the ROM animation is shown then rom must boot up
plz try again
You have to boot the stock firmware first.
Flash a stock rom
Boot it properly
Turn off the phone
Flash the custom rom kernel using fastboot
Do your wipes
Install the custom rom zip
The phone should boot properly now
FreaKHead said:
go in mounts & format system with all othe wipes
& try
+1 if the ROM animation is shown then rom must boot up
plz try again
Click to expand...
Click to collapse
abdozoon said:
You have to boot the stock firmware first.
Flash a stock rom
Boot it properly
Turn off the phone
Flash the custom rom kernel using fastboot
Do your wipes
Install the custom rom zip
The phone should boot properly now
Click to expand...
Click to collapse
I followed your instructions.
I flashed a .310 rom first and rooted it.
then unlocked my bootloader -- i got a bootloop
I powered off the device and flashed the rom's kernel and wiped everything except external sdcard
booted to recovery and flashed the rom and rebooted.
I am getting the same issue.
ajeesh.m said:
I followed your instructions.
I flashed a .310 rom first and rooted it.
then unlocked my bootloader -- i got a bootloop
I powered off the device and flashed the rom's kernel and wiped everything except external sdcard
booted to recovery and flashed the rom and rebooted.
I am getting the same issue.
Click to expand...
Click to collapse
flash .310 again then flash a custom kernel and the send me screenies of about phone
I flashed .310 and flashed the kernel of "beanstalk" rom and flashed "beanstalk" rom without wiping anything.
the device booted completely with no issues.

ROM unable to install

This is my second attempt to install custom ROM and I failed... I did everything step by step and it doesn't work. Or it doesnt boot at all or it craches in recovery mode while installing update.
This time i used some nightly unofficial and it stoped installing in recovery :S This is so annoyng
I downloaded stock lastest from code support for my Samsung S5830 because obviously there is non stable version of custom ROM right now.
I do not advise to go over Android 2.3.6 for S5830 or you will burn down your phone system...
Bugeera said:
This is my second attempt to install custom ROM and I failed... I did everything step by step and it doesn't work. Or it doesnt boot at all or it craches in recovery mode while installing update.
This time i used some nightly unofficial and it stoped installing in recovery :S This is so annoyng
I downloaded stock lastest from code support for my Samsung S5830 because obviously there is non stable version of custom ROM right now.
I do not advise to go over Android 2.3.6 for S5830 or you will burn down your phone system...
Click to expand...
Click to collapse
What did you do exactly?
Viper The Ripper said:
What did you do exactly?
Click to expand...
Click to collapse
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6
Bugeera said:
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6
Click to expand...
Click to collapse
Ok now you are unrooted on your new polish right. So now root it with UniversalGingerbreadroot.zip (google it.) Flash an older version of CWM(5.0) through the stock recovery. Finally install a stable custom rom initially do not go for CM roms as for testing try some other stock based rom and if successful you can advance to CWM.
All the best.
Bugeera said:
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6
Click to expand...
Click to collapse
Here you'll find ROOT and CWM files to get ready your Ace, than you'll be able to install Customs STOCK Roms, CM7.x, CM9.x, CM10.x
Read carefully the threads in GT-S5830 Android Development section and follow the dev's instructions
PS: To get CM11.x you'll need to flash CWM6.x or TWRP

Categories

Resources