Database Develop

Firmware: EVA-L09-hw-eu-V001 (???)

Good evening folks!
I've been lurking around in this amazing forum for some time now, but now i need a little bit of help.. I have searched my ass off in here and out there in google city, but can't find squat!
So...
I have this Huawei P9 that used to be EVA-L09C432B182 until yesterday when i tried to update/upgrade to C432B360 dload style. It went great i thought, 100% and succeed message. Then it rebooted to eRecovery...
I tried to update the HW_EU the same way - 99% Fail message.
I've tried update via Huawei updater as you can see in the picture below. I also tried unbrick/refurbish via Huawei updater but all that happened on Hisuite you can also see in the picture. The circle of nothing kept going for hours.
What my EVA can do? Enter eRecovery (which helps me nothing), fastboot/rescue mode (Huawei updater kinda recognizes my device, Hisuite does not.) and force update three button method (Here i get a message when trying to flash anything from ext. sd card: "Not compatible with this version, download the right software". Or something to that matter.)
If you take a look at the picture i've tried to embed below, you'll see that Huawei updater recognizes my phone as
Hardware: EVA-L09
Firmware: EVA-L09-hw-eu-V001 (Never seen or heard of!)
C- version: C000
D- version: D000
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My question is; What can i do with this?
I'm not rooted.
[/COLOR]Phone locked.
FRP Unlock
Windows recognize as: HI3650, Huawei Android Interface.
I'll appreciate all and any links, downloads, guides, tools.. Ideas you might have!
Squirrel.
Norway

try to do "systemgjenoppretting" what happens then ?
ofcorse, swich in hisuite to "no proxy'

I have the same problem mate , i don't know what can i do . Did you try to wipe cache etc?

Arnys said:
try to do "systemgjenoppretting" what happens then ?
ofcorse, swich in hisuite to "no proxy'
Click to expand...
Click to collapse
Hisuite answers with "your device is not supported, contact local service..."

pindlosz1 said:
I have the same problem mate , i don't know what can i do . Did you try to wipe cache etc?
Click to expand...
Click to collapse
Yeah, i tried. Wipe cache - Fail. Factory reset - Fail.

Something actually happening after trying custom rom method on Huawei updater with hisuit IP/Port set manually .
Lets hope it lasts!

It helped you?

pindlosz1 said:
It helped you?
Click to expand...
Click to collapse
Don't know yet, it's going reeealy slow. I'll keep you posted!

It was going so great...
And then not so much..

I was stuck in a similar sort of place, I used a program called DC Phoenix, which I found in these forums. You have to pay a fee of 15 euros which gives you access to force flash a rom. It worked perfectly on mine after I had exhausted other options. Its part of dc unlocker. Hope that helps

Natchi said:
I was stuck in a similar sort of place, I used a program called DC Phoenix, which I found in these forums. You have to pay a fee of 15 euros which gives you access to force flash a rom. It worked perfectly on mine after I had exhausted other options. Its part of dc unlocker. Hope that helps
Click to expand...
Click to collapse
Hey!
Do you know if this Is a guaranteed succeed solution? I'll look into it. Definitely worth the 15Euros if it actually works magic!
Thanks.

Theres a forum thread somewhere on here, I cant find it at the minute, but there were numerous good reviews

Tried using SRK and update extractor. See pic.
Anyone know what i can do with this "command not allowed"?
No time for school, work or family with this **** going on..!

Natchi said:
I was stuck in a similar sort of place, I used a program called DC Phoenix, which I found in these forums. You have to pay a fee of 15 euros which gives you access to force flash a rom. It worked perfectly on mine after I had exhausted other options. Its part of dc unlocker. Hope that helps
Click to expand...
Click to collapse
I did this too , phone starts normally and it's full working but i have to write NCK code (simlock ?) . How can i repair this ?

I would try and flash a full rom using the dload method just to make sure. I flashed B136 after I reset mine to take it back to original and let it updat to b166 ota

Phoenix woke my phone up again! Thanks!! Now I'm on Nrd90m though, hoping to bring back stock.

Help
Look_Squirrel said:
Phoenix woke my phone up again! Thanks!! Now I'm on Nrd90m though, hoping to bring back stock.
Click to expand...
Click to collapse
I had the same problem, what did you do to fix it?

I downloaded DC phoenix from DC unlocker page. Bought 15 credits ≈ 15 euro
Downloaded full b361 for EVA-L09. Then followed instructions given by the program. I can explain better when I'm on my laptop if needed?
Still have no built-in camera, no BT, no NFC and no built-in flashlight..

[GUIDE] Fix Broken OTA Updates After Downgrade & Have EMUI 11 With GMS (C636)

This guide only applies to the phones with region number C636!!! I'm not responsible for what you do with your phone, take your own risk.
This guide will erase all the data on your phone, so backup before following.
If you downgraded your phone to 10.1.0.131 install GMS and then your phone&HiSuite keeps telling you that 131 is the latest version, this guide is for you.
All credits goes to "GSMFix" youtube channel and "Ictfix" website.
1) Get a USB OTG cable/stick (USB Type-A to Type-C). I got mine for 1.5 Dollars at Mr.DIY.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2) Download this file. Firmware
3) Copy the "Dload" folder to your USB stick.
4) Using your OTG cable/stick, insert the usb stick to your phone.
5) In your phone dialer, dial *#*#2846579#*#*
6) Click on Software Upgrade
7) Click on Memory card Upgrade
8) Wait patiently. Upgrade should take around 10 minutes.
9) After you boot into your phone, set up your phone and install GMS using Googlifier.
10) Voila! Now you can update your phone in the settings! First, it will update to 10.1.0.182 and then 11.0.0.151

Works perfectly, congratulations on the tutorial

jovemfla said:
Works perfectly, congratulations on the tutorial
Click to expand...
Click to collapse
Glad to help

The firmware download link in the op is broken. Could someone mirror it?

desertflyer said:
The firmware download link in the op is broken. Could someone mirror it?
Click to expand...
Click to collapse
It works now

It says the file is corrupted or needs a pasword pasword to extract. Is there a pasword?

Hello thank you for the tutorial
Please I am on 10.1.0.131 (C636) and have install GMS
will I lose everything if I upgrade via USB?

This is my current Version
Will it work

My GMS is working absolutely fine enabling the phone to use all my banking apps and wallets. If I follow this
it seems like to reinstall GMS again and loosing settings and data.
So rather I will stick with EMUI 10 cause not guaranteed that banking apps will run perfectly on this method of GMS installation.
Thank you

Ronju Khan said:
My GMS is working absolutely fine enabling the phone to use all my banking apps and wallets. If I follow this
it seems like to reinstall GMS again and loosing settings and data.
So rather I will stick with EMUI 10 cause not guaranteed that banking apps will run perfectly on this method of GMS installation.
Thank you
Click to expand...
Click to collapse
Me too
I have decided to stick on this version rather than upgrading
My only problem is puch notifications

Okijaamaka said:
This is my current Version
Will it work
View attachment 5285153
Click to expand...
Click to collapse
Yes.

bckfrm said:
It says the file is corrupted or needs a pasword pasword to extract. Is there a pasword?
Click to expand...
Click to collapse
try re-downloading and make you you followed the guide exactly. It's not corrupted and doesnt have pass. Maybe try with another pc?

faceliler said:
Yes.
Click to expand...
Click to collapse
Thank you but I will not doing the update again since I have gotten my push Notifications working 100%

I also have my push n. working with the latest EMUI 11 update

My current version is ELS-LGRP4-OVS 10.1.0.183. I've just recently reset to factory settings. will this download update my phone to EMUI 11? i originally thought that resetting back to factory would enable auto updates from OTA.

Keysii said:
My current version is ELS-LGRP4-OVS 10.1.0.183. I've just recently reset to factory settings. will this download update my phone to EMUI 11? i originally thought that resetting back to factory would enable auto updates from OTA.
Click to expand...
Click to collapse
You need to look at your region number, if your OTA updates are broken, resetting won't fix it. If your region number is C636, this guide can fix it.

faceliler said:
You need to look at your region number, if your OTA updates are broken, resetting won't fix it. If your region number is C636, this guide can fix it.
Click to expand...
Click to collapse
did the flashdrive need to be empty to do this?

Keysii said:
did the flashdrive need to be empty to do this?
Click to expand...
Click to collapse
I don't really know

Keysii said:
did the flashdrive need to be empty to do this?
Click to expand...
Click to collapse
Better to be empty and formatted NTFS.

My one is C636 (original build was C636E3R5P4) but still getting an "Incompatiblity with current version" error when trying this. Current version is C636E3R5P1 10.1.0.182.
Any reason as to why this could be?

Question Cannot update - 3 dots missing

Hi All,
I have a Note 10 5G 4+128. It was originally on vodafone firmware and I unlocked the bootloader and installed EEA 12.0.8.0 Stable. I shortly after received an OTA update to 12.0.9.0 (RKSEUXM) so assumed everything was all good.
I have not received the 12.0.10.0 update yet and the three dots are missing on the update page for me to do it manually. If I reboot the phone and go immediately to the update page the three dots are there for a split second then disappear.
The only thing I can think that has caused this is I have removed something I thought was bloatware using the XIAOMI ADB fasttools java app on windows. I have tried reinstalling pretty much all of the "bloatware" but it does not fix the issue.
A few threads on similar things for different devices have popped up on reddit and people say to clear the data and cache from the system updater app. However I do not appear to have that app and its not in the list of things ive previously uninstalled as "bloatware". My system apps updater still works fine and reguarly updates other system apps.
Any ideas?

tap 10 time on miui logo. you will see advanced options

Thanks for your response.
I have tried this. It states the advanced options are active. My problem is that the 3 dots themselves which gives access to the update settings, which should be shown even when advanced options are off, is completely missing.
If I restart the phone and go into the update page the dots show for a split second then disappear. It almost feels like an app is crashing in the background or something.

Please see attaches screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mmm... you can try update manually with miflash tools. you know how to do?

I know how to use the miflash tools, however I believe the bootloader needs to be unlocked to use them. I have already relocked the bootloader so would need to wait a week to unlock it again, plus that would mean wiping the user storage on the device which is rather not do.
Surely there must be something else im missing here? Other people online have stated to clear the data and cache from the Updater app on other MIUI devices, however I see no way to do that.

AnUrbanPenguin said:
I know how to use the miflash tools, however I believe the bootloader needs to be unlocked to use them. I have already relocked the bootloader so would need to wait a week to unlock it again, plus that would mean wiping the user storage on the device which is rather not do.
Surely there must be something else im missing here? Other people online have stated to clear the data and cache from the Updater app on other MIUI devices, however I see no way to do that.
Click to expand...
Click to collapse
online i have found a tool very helpfull. i have remove the brand from my phone with bootloader locked. now i have the latest eu version. you can try it to update your firmware. search xiaomitool v2 by Francesco Tescari. another helpfull tool i found is xiaomiadbfastboottools.jar

The adb fastboot tools are the ones ive used to remove the bloatware on this and other phones in the past. It is excellent.
The Xiaomitool v2 is also great.
However I still feel like I am missing something. I should not have to unlock my bootloader and wipe my device every time there is an incremental MIUI update. There must be something I am missing here that is causing me not to get the OTA update or have the ability to manually update.

AnUrbanPenguin said:
The adb fastboot tools are the ones ive used to remove the bloatware on this and other phones in the past. It is excellent.
The Xiaomitool v2 is also great.
However I still feel like I am missing something. I should not have to unlock my bootloader and wipe my device every time there is an incremental MIUI update. There must be something I am missing here that is causing me not to get the OTA update or have the ability to manually update.
Click to expand...
Click to collapse
mmmm.... my advice is a clean installation of stock firmware. and the best way to do this is via miflash with bootloader unlocked. i'm not sure but i think something goes wrong during an ota update. so a sytem wipe is necessary. you could try reflash your current stock firmware via Xiaomi tool v2. i have used it to remove my brand without unlock and works fine. but if this don't solve your problem i think the only solution is a new clean installation

For mi 11 lite 5G: Go to "Settings/Apps/Manage apps" and search for app "Updater" then click on it and clear all data and cache.

Duddly said:
For mi 11 lite 5G: Go to "Settings/Apps/Manage apps" and search for app "Updater" then click on it and clear all data and cache.
Click to expand...
Click to collapse
Thank you! This really helped

Question Unresponsive touchscreen

I am on a global firmware, version 12.5.4, and sometimes the touchscreen becomes really unresponsive to the point that the device is almost unusable. I am aware that this is a known issue, has anyone found a permanent fix? Is this still a thing on more recent ROMs?
I feel this is not acceptable on a top-of-the-line phone like the MI 11 Ultra.

You must activate antiflicker in display settings and select "custom" in "prevent accidental edge touches". This is a workaround and improve this issue, still it may occur from time to time. Otherwise you can update to the latest 12.5.6.0, so far in this version I haven't seen this problem (although with those settings enabled)

xNAPx said:
You must activate antiflicker in display settings and select "custom" in "prevent accidental edge touches". This is a workaround and improve this issue, still it may occur from time to time. Otherwise you can update to the latest 12.5.6.0, so far in this version I haven't seen this problem (although with those settings enabled)
Click to expand...
Click to collapse
Thank you. Anti flickering mode is nice. But the problem still persist. No update is available yet but buying best of best by MI and you get this small irritating UI issues is actually very bad.

Unfortunately the workaround only reduce it

Since the 12.5.6.0 touch issues are complete gone for me.
Thx god, the issues were frustratin sometimes

comediiian said:
Since the 12.5.6.0 touch issues are complete gone for me.
Thx god, the issues were frustratin sometimes
Click to expand...
Click to collapse
Hey bro, are you on RKAMIXM? And is your device rooted or unlocked bootloader? Or as original as it is out of box?

hassanaliyeh said:
Hey bro, are you on RKAMIXM? And is your device rooted or unlocked bootloader? Or as original as it is out of box?
Click to expand...
Click to collapse
Yeah, running Global Stable, Bootloader is unlocked but device is unrooted.
No need for root on my side

comediiian said:
Yeah, running Global Stable, Bootloader is unlocked but device is unrooted.
No need for root on my side
Click to expand...
Click to collapse
Thanks,
Just confirmed my theory, I couldn't update to 12.5.6 because of locked bootloader

You can push the update with advanced features. To activate them you need to press on miui button 6/7 times. After that download the latest .ZIP package (recovery update) and when in the updater select on the 3 dots in the up right "choose installation package"

xNAPx said:
You can push the update with advanced features. To activate them you need to press on miui button 6/7 times. After that download the latest .ZIP package (recovery update) and when in the updater select on the 3 dots in the up right "choose installation package"
Click to expand...
Click to collapse
I did that already and it stopped midway with stable recovery update, I had to format factory reset device and reupdate to original 12.5.4 to be able to use device normally.. And with only incremental update, it gave me an error saying cannot update with unofficial release.

May I ask you what did you download please?

Stable update 12.5.6 - local update- went all good, once reached the point to restart phone, then it fails after restart with veeeeeery slow phone and almost unresponsive, took 10mins to unlock screen instead of split of a sec.
Tried to flash a new 12.5.6 and 12.5.4 by fastboot, failed no matter what I do as bootloader is locked. The only way I got away with it was download 12.5.4 and local update it after I factory reset device which didn't help with smoothness but was needed to access local update again

AFAIK there is no fastboot 12.5.6.0 update, only recovery. I would suggest to re download the update as the one you downloaded might have been corrupted

xNAPx said:
AFAIK there is no fastboot 12.5.6.0 update, only recovery. I would suggest to re download the update as the one you downloaded might have been corrupted
Click to expand...
Click to collapse
Hi, about flashing the latest ver, this one is beta no? If i do flash it will i lose ota updates?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Why you should lose OTA updates? It is stable beta

Updated manually to 12.5.6 and the problem seems finally gone.

If your bootloader is locked I'd recommend not to update.
If it is locked and you successfully update please let me know

thyrel said:
Updated manually to 12.5.6 and the problem seems finally gone.
Click to expand...
Click to collapse
I confirm that, problem is gone. System is super smooth and reactive. Close to perfection

xNAPx said:
Why you should lose OTA updates? It is stable beta
Click to expand...
Click to collapse
I don't know, just got the phone 2 days ago. I'm trying not to mess with anything I'm not sure of.
Sorry if that seemed stupid but i do not want to risk it.
So if i update using that file I'm fine? Also is it the correct file or it should be bigger??

Usually recovery ZIP is smaller than fastboot. Onestly I pushed manually the update through OTA from stable 12.5.4.0 and everything went perfectly. Even with root and of course I have bootloader unlocked. Don't know what can go wrong if you have bootloader locked

Question Cannot register a new fingerprint in OnePlus 10 PRO

Hi
I bought a new OnePlus 10 PRO from Aliexpress. Its a CH version that the seller installed on it a global rom.
In the first setup of the phone, When I get to setting the fingerprint, I am unable to set it. I get the following:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried updating the phone, I tried factory reset... its always the same.
Any idea?
Thanks !

Are you sure that he installed the global rom? With model is yours NE2213 ? I bought from them also but I don't have this issue.
Anyway, you can try to use Oxygen Updater, to check if there is an update for your device or since your device is reseted, you can install ColorOS back

Hi,
I am on NE2215. Using Oxygen Updater I see that I have the most up to date version.
Not sure exactly how to install ColorOS.. I do want to have the regular OS that I would have as if I bought the global version (which i guess this is what the global rom mean..)

Right, I agree with you. I recommended to install the coloros just to check if it's a compability issue.
You can try to reinstall you version and see what happens, just download it and flash it again.

ok, and now for someone that have no idea how to do it?

If yours is NE2215 A13 you can download the ota file from this link: https://android.googleapis.com/packages/ota-api/package/7548d30abac02bde85a403bcc3a218df868e1910.zip
Then put it in your phone root and from your device Settings -> About the device -> Click on the option to check for the update -> 3 dots menu -> local installation and chose this package. It will start the installation.

Thank you for your help !
Downloaded and copied into my device files.
However - When I go to "About device" and click on the "up to date" button to search for updates, it just tells me I have no updates and i see no 3 dots to go for local installation:
What am I missing?

I think it's obvious that something went wrong during the region change, this issue was prevalent on the 8 pro and was extremely difficult to fix.
Check out the 8 pro threads you'll be sure to see it. It's a partition iirc and if it's borked then it simply will not work..
I can't remember the name of it off hand but have a look and I'm sure you can get an idea of what may be wrong, specifically that partition.
Overall it's difficult to say as you've got a region changed phone, have you asked the seller what they did? If it is indeed as difficult as it was on the 8 pro to fix and seeing as you may be the only person experiencing this (far as I know) then I'd consider returning it.
You could re-flash the entire OS via fastboot enhance but that would also bring with it inherent problem's, if it's new then I guess the question you need to ask yourself is it worth it?
Did you save much money getting that converted variant?

dkaro said:
Thank you for your help !
Downloaded and copied into my device files.
However - When I go to "About device" and click on the "up to date" button to search for updates, it just tells me I have no updates and i see no 3 dots to go for local installation:
View attachment 5624305
What am I missing?
Click to expand...
Click to collapse
This page is from android play services. You need to click on the first banner

@dladz TBH I bought it for around 70% of the price I would pay locally.. So yea, it was much cheaper. I also had before OP9 global rom and had no issues with it.
Maybe indeed as last step its worth trying to reinstall everything again.. I'm just not sure how to do it. I cannot find the local upgrade option as advised above, and after googling a bit how to do it using ADB, when i try to run fastboot oem unlock - the CMD will just show me forever "< waiting for any device >" (and this is although I was able to communicate with my device using "adb devices" and I got back my device id.
@zopostyle I did click on that banner you're showing and I got to the page I showed you before..
I'm clueless

If that is the page showing I'm assuming you're on a gsi ROM and not oxygen os.
Now it's better to reinstall OxygenOS completely because it doesn't seem to be the ROM you're running.
Search here on xda to unlock your bootloader and then you need to find the zip with the full ROM for you device and install it from fastboot as mentioned.

OK, i'm trying to unlock my bootloader but as I mentioned:
dkaro said:
and after googling a bit how to do it using ADB, when i try to run fastboot oem unlock - the CMD will just show me forever "< waiting for any device >" (and this is although I was able to communicate with my device using "adb devices" and I got back my device id.
Click to expand...
Click to collapse
Any idea what am I doing wrong?
I tried several tutorials online and so far I found no tutorial that will actually give me step by step that each step is actually working..

Maybe it's missing the drivers. Try this https://gsmusbdriver.com/oneplus-10-pro

dkaro said:
@dladz TBH I bought it for around 70% of the price I would pay locally.. So yea, it was much cheaper. I also had before OP9 global rom and had no issues with it.
Maybe indeed as last step its worth trying to reinstall everything again.. I'm just not sure how to do it. I cannot find the local upgrade option as advised above, and after googling a bit how to do it using ADB, when i try to run fastboot oem unlock - the CMD will just show me forever "< waiting for any device >" (and this is although I was able to communicate with my device using "adb devices" and I got back my device id.
@zopostyle I did click on that banner you're showing and I got to the page I showed you before..
I'm clueless
Click to expand...
Click to collapse
I feel you buddy.
You can use the app in my Magisk guide to do local installs.
Unlocking the bootloader you need to type fastboot flashing unlock
I haven't had to change region myself, but I did make a thread for someone else where the process was listed, think I called it changing Chinese firmware iirc.
If it's just a case of a re-flash of the firmware you're on, it's not that difficult.
Just use oxygen updater and grab the full firmware then do the local update using the app I mentioned above (listed in my Magisk/root guide)
I've never done this when not having the bootloader unlocked personally, but you can unlock and that'll wipe your phone with the recovery already on your device.
Only issue I have going down these routes is what else is missing? Do any of these processes stand up if we can't rely on the integrity of the OS that someone has put on and made a balls of it?
Sorry I know you may not agree but 30% is a small price to pay to avoid a brick and bring stability..
But that's me

zopostyle said:
Right, I agree with you. I recommended to install the coloros just to check if it's a compability issue.
You can try to reinstall you version and see what happens, just download it and flash it again.
Click to expand...
Click to collapse
That is a seriously good shout and would explain the fingerprint.

Hi guys, thank you again for helping me.
I tried installing again the uSB drivers, and ran again "fastboot flashing unlock" - it still telling me:
As far as I understand I have to unlock it for next step, right? (either for resetting back to colorOS or reinstalling oxygen)
I will try later tonight the other method (this magisk thing) - is this the link you're talking about?
Can you please also give me a link to download the full most up to date global Oxygen version and the CH Color one? i'll try both
Thanks !

For OxygenOS there is no A13 full yet...so you have to download A12 from this link: https://gauss-componentotacostmanua...22/03/24/a9f9e7ec682744c2ba606a366df587ac.zip
Source: https://www.xda-developers.com/oneplus-oxygenos-12-android-12-update-tracker/#oneplus10pro
The chinese one is hard to find, if I find it I post the link here...
Also this thread might help you: https://forum.xda-developers.com/t/oneplus-10-pro-ne2215-rooted.4431585

zopostyle said:
For OxygenOS there is no A13 full yet...so you have to download A12 from this link: https://gauss-componentotacostmanua...22/03/24/a9f9e7ec682744c2ba606a366df587ac.zip
Source: https://www.xda-developers.com/oneplus-oxygenos-12-android-12-update-tracker/#oneplus10pro
The chinese one is hard to find, if I find it I post the link here...
Also this thread might help you: https://forum.xda-developers.com/t/oneplus-10-pro-ne2215-rooted.4431585
Click to expand...
Click to collapse
Really is odd about them not being full... They're massive compared to conventional incremental updates. 4.05GB that's a hell of an incremental.
Haven't had to do it myself and it's sightly off topic but is the full version you'd use to recover a phone albeit without a functional MSM?
So fastboot flashing?
Cheers

Hi again,
So, i'm trying to follow the tutorial here. I got stuck already in the first step - I cannot extract the boot file using Fastboot Enhance:
This is although in this link I have downloaded a full version (EU version (NE2213_11.A.13)).
What should I do next please?

dkaro said:
Hi again,
So, i'm trying to follow the tutorial here. I got stuck already in the first step - I cannot extract the boot file using Fastboot Enhance:
View attachment 5624521
This is although in this link I have downloaded a full version (EU version (NE2213_11.A.13)).
What should I do next please?
Click to expand...
Click to collapse
As @zopostyle said earlier.. you'd need to use 12 mate. As that's the only full version available...13 won't cut it...you can extract the images using the button that says allow incremental, that's useful for extracting boot images for rooting.
But there's a reason why that's there, it's so you don't go ahead and flash it.... According to @zopostyle 12 is the only full version so that's what you would need.
Again I've not done this myself so perhaps wait for someone else to chime in what to do next.