hi, I have a xiaomi mi a2 stuck on a black screen, I tried to flash different roms from xiaomiflash, all the flashes are successful with the message success, but the phone does not turn on, if it goes into fastboot only the backlight turns on, goes into edl mode. i checked the arb is on 2, the bootloader is locked. can anyone give me some advice?
Related
Hi Peoples,
I am getting bootloop after flashing China Dev, China Stable or Global ROM. My MI5's boot loader is already unlocked. So I don't need to flash via EDL mode. So far I am seeing below scenarios:
* Flash successful without edl mode - MI mi.com logo coming then suddenly restarting to the same state and again showing mi logo.
* Flash successful without edl mode - MI mi.com logo coming then ..... android logo coming then again looping the same thing. After couple of same loop then only mi logo looping!
I tried Mi Flash tool from fastboot ROM section, I tried another Flashtool from the en.miui forum and lastly I tried MiFlash Beta. But the same scenario.
I have also seen several times that, after flashing phone went to edl mode itself and could not be ON and none of the button combination works. Then I had to Flash again. However, still in boot loop. This is crazy!
Please help me out if you can!
Got the same problem - but i did not yet flashing any ROM, my xiaomi mi5 fall into boot loop after reboot (I did not changing any settings, or smth else).
Maybe someone can help in this situation? (my bootloader is locked)
Have you found any solution for this problem? I am experiencing the same issue when I tried to flash Chinese Rom to global rom in Mi5
I tried to flash Miui 9 on my Mi A2 with this install guide (https://forum.xda-developers.com/mi-a2/how-to/miui-10-install-guide-t3844729). But when i flashed Miui 9 MiFlash showed me it was succesful, but now I´m stuck at the MI Logo and cant go in fastboot mode. Also i think I can´t go in EDL-Mode because when i try to short the test points nothing happens. So neither MiFlash or Fastboot is recognizing my phone. What can I try?
I was using my mi a2 and it randomly freezed, then i restarted using power button, but he didn't turned on, now it is just black screen and i can't get into bootloader mode or turn the phone on.
Bootloader was locked, never tried to unlock.
I think it got stuck on EDL mode because it shows up 'qualcomm hs-usb qdloader 9008' on device manager on windows.
Already tried to use mi flash tool to flash the last ROM, it recognize the phone but fails every time.
Neither adb or fastboot recognizes the phone.
Some errors that i had using the tool:
Failed to open the SDCC Device slot 0 partition 0 (it shows up only on version 2019.11.15.0)
Cannot receive hello packet (when i get this error, i hold the power button for a few seconds then i try again only to get the error below)
Error when flashing storsec.mbn
Can someone help me?
UPDATE
I downloaded mi flash tool 2016.08.30.0 and i can successfuly flash the rom, but still got black screen with no response.
I ve little same issue. need help too.
I have Mi A2 runnig on android8.1
but it didnt update 9.0
so I try with twrp but fail no boot anymore.
I use miFlash tool. accdently I locked phone. flashed rom didnt boot.
now I ve just fastboot mode. or open 'android one' screen and then goes black.
I try EDL mode by test point inside phone.
flash with 2018 mi Flash tool but stuck in flashing...
flash with 2016 mi Flash tool write succesful flashed afte 6min. but not boot.
I read 2 days on forums. cant find anything to do.
is there any solution?
thanks
Hi, has anyone made any progress?
Theduardds said:
I was using my mi a2 and it randomly freezed, then i restarted using power button, but he didn't turned on, now it is just black screen and i can't get into bootloader mode or turn the phone on.
Bootloader was locked, never tried to unlock.
I think it got stuck on EDL mode because it shows up 'qualcomm hs-usb qdloader 9008' on device manager on windows.
Already tried to use mi flash tool to flash the last ROM, it recognize the phone but fails every time.
Neither adb or fastboot recognizes the phone.
Some errors that i had using the tool:
Failed to open the SDCC Device slot 0 partition 0 (it shows up only on version 2019.11.15.0)
Cannot receive hello packet (when i get this error, i hold the power button for a few seconds then i try again only to get the error below)
Error when flashing storsec.mbn
Can someone help me?
UPDATE
I downloaded mi flash tool 2016.08.30.0 and i can successfuly flash the rom, but still got black screen with no response.
Click to expand...
Click to collapse
A year ago i had the same issue kinda. The only thing that worked for me was flashing mi 6x stock rom and after some trial an error it flashed and it fixed. The only problem is i have a mi 6x forever. Basically download mi 6x stock rom. Try that mi flash tool and keep hard rebooting and click flash button right after it vibrates. If lucky sometime will work and flash. If nothing try older versions of mi flash tool. Good luck.
all of you have the same problem ... you bootloop into edl mode because you have ARB4 triggered ..that means the only stock you can flash in miflash is ARB4 rom ( latest most up to date )
you also need patched programmer file since flashing ARB4 requires miui account
the fix to this problem is documented everywhere and explained lots of times ...just read ..follow this guide and one-click tool to unbrick
next time read ......a little ..
https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
My Xiaomi Mi 5X came with MIUI 9/Android 7.1. I tried to flash it with Mi flash tool.
Tissot_9.0_V10.0.10.0.PDHMIXM_Fastboot is the ROM I tried to flash.
However, something went wrong during the process. The flash tool status said flashing, but the phone began to vibrate every second. The screen is black, no indicator light or Mi logo. I cannot enter recovery mode or fastboot.
When I unplug it the vibration stops. When
charging the phone or
plugging it into the pc using USB cable or
trying the power on or
trying to enter recovery mode/fastboot
it begins to vibrate every second.
How can I fix this?
Flash latest fastboot rom with EDL test point.
if latest version do not work flash this version.
1.tiffany_images_V8.5.9.0.NDBCNED_20170810.0000.00_7.1_cn (can access fastboot, recovery and system boots but no display)
2.tiffany_images_V10.1.3.0.NDBCNFI_20181105.0000.00_7.1_cn ( when flashed with EDL booted into fastboot and recovery but bootloop. When I flashed same version using fastboot everything stopped working only white led blinks)
before flashing this 8.5.9 version i tried many other versions but only this version worked for me.
Now I can access fastboot, recovery and boot into system. Touch screen works but no display.(display is broken but worked before flashing tissot rom)
Why did you flash a Tissot fastboot rom?
Hi
I've got a mi a2 that's softbricked. It randomly came up asking to go to recovery mode and after that, died. It now wont go past fastboot (can't enter recovery, gets stuck on the android one splash screen). I'm having a mess on with adb because the usb debugging was never enabled - any workaround?
Thankyou.