Related
Dear xda members,
I recently installed the Oxygen stable 9.0.2 on OnePlus3T
The phone was unlocked, rooted and with twrp 3.3.0-1 installed
During first boot after installation, I received this error:
Decryption unsuccessfull
The password you entered is correct, but unfortunately your data is corrupt
The only way to continue is a factory reset (but I would like another way, if possible).
I was able to revert to Oxygen stable 5.0.8, but the error persist.
Is there any procedure to access the encrypted data partition and recover files stored in it, before wiping all?
Thank you.
Kind regards
you need to do a factory reset from the recovery menu.You will lose all your data but its the only way.
You should totally flash the 5.0.8 fw after flashing the offical pie OOS. It has been discussed in the official thread here at XDA.
Check this:
https://forum.xda-developers.com/showpost.php?p=79542744&postcount=517
Tagtag123 said:
You should totally flash the 5.0.8 fw after flashing the offical pie OOS. It has been discussed in the official thread here at XDA.
Check this:
https://forum.xda-developers.com/showpost.php?p=79542744&postcount=517
Click to expand...
Click to collapse
Thank you very much for the information!
This is what I did
1 Boot recovery and press cancel when it asks for password
2 Adb push needed files in /mnt
3 Flash the rom (OnePlus3TOxygen_9.0.2_28_OTA_082_all_1905110010_f09a2bfe8e361d.zip)
4 Flash the firmware package (oxygenos-9.0.2-bl-km-5.0.8-firmware-3T.zip)
5 Flash twrp 3.3.0-1 again in the recovery partition
6 Flash Magisk 19.2
7 Wipe cache / dalvik-art (with errors related to mount storage)
But I found the same error of the first post. Which is my mistake in the procedure?
Darksp1der said:
Thank you very much for the information!
This is what I did
1 Boot recovery and press cancel when it asks for password
2 Adb push needed files in /mnt
3 Flash the rom (OnePlus3TOxygen_9.0.2_28_OTA_082_all_1905110010_f09a2bfe8e361d.zip)
4 Flash the firmware package (oxygenos-9.0.2-bl-km-5.0.8-firmware-3T.zip)
5 Flash twrp 3.3.0-1 again in the recovery partition
6 Flash Magisk 19.2
7 Wipe cache / dalvik-art (with errors related to mount storage)
But I found the same error of the first post. Which is my mistake in the procedure?
Click to expand...
Click to collapse
You could have flashed the firmware first, ROM second, but I don't think it would have changed anything.
We used to have this problem with the closed beta and with the open betas as well.
Once you wipe your storage, flash Pie, boot it, it doesn't happen again. I've been to Nougat, then back to Pie, no issues.
Since in my last post I made a complete mess out of my first time trying to root my K20 and install lineage I wanted to my make a separate post so that I can list all the steps I need to take to correctly setup my phone how I want it.
What I actually want
A rooted device
Lineage OS
Minimal excess files (A clean Install)
Current Steps
Unlock and flash recovery
Backup
Format Data! (It's important if you come from Miui)
Install Q Firmware + vendor
Install LineageOS followed by gapps
Reboot into system and setup device.
Reboot into recovery and flash magisk
Profit???
Feel free to tell me how stupid I am and what I need to add to the list or steps I should take to make this process better.
I also dont know if its possible to get recovery and rom on android 10 versions.
Thanks
Did these steps not work?
Sent from my Redmi K20 Pro using Tapatalk
BJack0 said:
Since in my last post I made a complete mess out of my first time trying to root my K20 and install lineage I wanted to my make a separate post so that I can list all the steps I need to take to correctly setup my phone how I want it.
What I actually want
A rooted device
Lineage OS
Minimal excess files (A clean Install)
Current Steps
Flash a custom recovery
Create a backup
Root???
Install LineageOS
Profit???
Feel free to tell me how stupid I am and what I need to add to the list or steps I should take to make this process better.
Thanks
Click to expand...
Click to collapse
1. Unlock and flash recovery
2. Backup
3. Format Data! (It's important if you come from Miui)
4. Install Q Firmware + vendor
5. Install LineageOS followed by gapps
6. Reboot into system and setup device.
7. Reboot into recovery and flash magisk
You could also check LOS thread: Here and here
Remember:
Chinese firmware: Widevine L3 and NFC support
Indian firmware: Widevine L1 but no NFC support
ishaqtkr said:
Did these steps not work?
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
They may work as it but I was just wondering if anyone could go into more detail or if there was a better approach and from what Kollachi said there clearly is a better way that what I said.
Since I'm in stock ROM and haven't ever flashed AOSP ROM in this phone I'll just back off lol
Sent from my Redmi K20 Pro using Tapatalk
Kollachi said:
1. Unlock and flash recovery
2. Backup
3. Format Data! (It's important if you come from Miui)
4. Install Q Firmware + vendor
5. Install LineageOS followed by gapps
6. Reboot into system and setup device.
7. Reboot into recovery and flash magisk
Click to expand...
Click to collapse
I like the details steps but I have a few questions.
(Unlock and flash recovery) From what I can tell there are two recovery's Orange fox and TWRP
(Format data) Just format data or are there other sections I should format/wipe
(Install Q Firmware + Vendor) I have no idea what Q firmware is or what vendor you are referring to
(Install Lineage + gapps) Is there a specific version from the Mi 9T pro since the official site doesn't list it
Any of the two recoveries will work. Q firmware means Android Q. Wile data/cache dalvik that's it. Regarding firmware, there's a clear topic of Lineage OS in K20 Pro forum which is still in unofficially state
Sent from my Redmi K20 Pro using Tapatalk
BJack0 said:
I like the details steps but I have a few questions.
(Unlock and flash recovery) From what I can tell there are two recovery's Orange fox and TWRP
(Format data) Just format data or are there other sections I should format/wipe
(Install Q Firmware + Vendor) I have no idea what Q firmware is or what vendor you are referring to
(Install Lineage + gapps) Is there a specific version from the Mi 9T pro since the official site doesn't list it
Click to expand...
Click to collapse
1. You can take what you want. Orangefox is based on TWRP.
2. Format data is needed if you come from miui. If you did it you are good to go. But it wouldn't be false to wipe system, dalvic, cache
3.https://downloads.akhilnarang.me/MIUI/raphael/ --> Take 10.4.6.0 or 10.4.8.0 (Android 10 = Q)
4. No there is no specific version.
BJack0 said:
I like the details steps but I have a few questions.
(Unlock and flash recovery) From what I can tell there are two recovery's Orange fox and TWRP
(Format data) Just format data or are there other sections I should format/wipe
(Install Q Firmware + Vendor) I have no idea what Q firmware is or what vendor you are referring to
(Install Lineage + gapps) Is there a specific version from the Mi 9T pro since the official site doesn't list it
Click to expand...
Click to collapse
I would recommend the latest TWRP from here
https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
The dev is an official TWRP dev, so this version, or something very close to this, is likely to become official in the future.
OrangeFox is a heavily modified TWRP and has a lot of added functionality specific to MIUI. If you wanted to stay on stock MIUI, but debloat and have root, etc. then OF would be the better choice, as it has functionality that lets it play nicely with MIUI (it can remain installed when OTA updates are installed)
As someone new to flashing on Android, I would suggest downloading a 10.4.x fastboot ROM from the site I pointed to in your other post, then follow the same procedure to flash the ROM.
Make your choice based on Kollachi's info and what's important to you (HD Netflix - choose Indian, or a working NFC - choose Chinese)
However you MUST change the flash option to 'clean all'.
At this point you've got a nice squeaky clean starting point.
Boot into the ROM at least once, though it's not necessary to go through all the setup.
After that follow Kollachi's steps but you can now ignore the step to flash vendor and firmware as it's all part of the fastboot ROM already flashed.
Wipe cache and dalvik, format data.
There is no official LOS for this phone yet. Hopefully it will go official in the future.
For now just get the current Android 10 based LOS from here.
https://forum.xda-developers.com/k20-pro/development/rom-lineageos-17-0-t3976469/post80406191
Robbo.5000 said:
I would recommend the latest TWRP from here
The dev is an official TWRP dev, so this version, or something very close to this, is likely to become official in the future.
OrangeFox is a heavily modified TWRP and has a lot of added functionality specific to MIUI. If you wanted to stay on stock MIUI, but debloat and have root, etc. then OF would be the better choice, as it has functionality that lets it play nicely with MIUI (it can remain installed when OTA updates are installed)
As someone new to flashing on Android, I would suggest downloading a 10.4.x fastboot ROM from the site I pointed to in your other post, then follow the same procedure to flash the ROM.
Make your choice based on Kollachi's info and what's important to you (HD Netflix - choose Indian, or a working NFC - choose Chinese)
However you MUST change the flash option to 'clean all'.
At this point you've got a nice squeaky clean starting point.
Boot into the ROM at least once, though it's not necessary to go through all the setup.
After that follow Kollachi's steps but you can now ignore the step to flash vendor and firmware as it's all part of the fastboot ROM already flashed.
Wipe cache and dalvik, format data.
There is no official LOS for this phone yet. Hopefully it will go official in the future.
For now just get the current Android 10 based LOS from here.
Click to expand...
Click to collapse
When ever I think I have the process memories and I follow the steps on my screen I still somehow **** this up and I cant understand how.
My current steps include
Flash the fastboot with the ROM that you linked me in my first post
Flash the recovery with TWRP (Every time I have then tried going back into TWRP is failed to work and prompted the original MIUI recovery)
Install the TWRP zip from custom recovery to try and fix the issue above (Only had this work once on orangefox and then never had success again)
So now I try to just flash the recovery and boot to it using CMD and it works fine
Move the lineageOS files from my PC to the phone SDCard
If I wipe data and the caches as suggested then the lineageOS zip is now go and I am back to flashing the fastboot ROM to restart the process
I know this might seem like im either stupid or just not getting it but could you or anyone else please make a bullet pointed list with links to what I have to download in order to actually achieve this since I cant do anything correctly even when trying to follow the steps.
(Im going to sleep since I have been trying to do this for hours now and I will check reply's in the morning.
Thanks for the help so far EVERYONE
BJack0 said:
When ever I think I have the process memories and I follow the steps on my screen I still somehow **** this up and I cant understand how.
My current steps include
Flash the fastboot with the ROM that you linked me in my first post
Flash the recovery with TWRP (Every time I have then tried going back into TWRP is failed to work and prompted the original MIUI recovery)
Install the TWRP zip from custom recovery to try and fix the issue above (Only had this work once on orangefox and then never had success again)
So now I try to just flash the recovery and boot to it using CMD and it works fine
Move the lineageOS files from my PC to the phone SDCard
If I wipe data and the caches as suggested then the lineageOS zip is now go and I am back to flashing the fastboot ROM to restart the process
I know this might seem like im either stupid or just not getting it but could you or anyone else please make a bullet pointed list with links to what I have to download in order to actually achieve this since I cant do anything correctly even when trying to follow the steps.
(Im going to sleep since I have been trying to do this for hours now and I will check reply's in the morning.
Thanks for the help so far EVERYONE
Click to expand...
Click to collapse
I just told you what I have done and I'm running it so far without issues.
Robbo just said you should flash the whole Chinese or indian rom but I don't like his steps because:
1. File is much bigger
2. MiFlash is just meh
3. If you forgot to change the flash process you are bricked if you don't take the correct firmware for your phone.
Default option in Miflash is set to "Clean all and lock". Every time you use it, you will need to change it into "clean all" or something other.
Kollachi said:
I just told you what I have done and I'm running it so far without issues.
Robbo just said you should flash the whole Chinese or indian rom but I don't like his steps because:
1. File is much bigger
2. MiFlash is just meh
3. If you forgot to change the flash process you are bricked if you don't take the correct firmware for your phone.
Default option in Miflash is set to "Clean all and lock". Every time you use it, you will need to change it into "clean all" or something other.
Click to expand...
Click to collapse
Yes flashing the whole fastboot ROM does add the risk, if you forget to change the flash option, but you are guaranteed a clean slate and so less likely to have any niggling issues that nobody else has. I would bet large sums of money that many of the issues you see on here, where only one person has some problem and everyone else is fine, would be solved by fastboot flashing MIUI before installing the ROM of choice.
If you know what you're doing and know when you'll be OK with what you've got and know when it's best to start clean, then going with the vendor and firmware is easier.
But if your unsure and new to flashing on Android phones, I will always suggest go with the overkill and know you've got the clean slate to start with.
---------- Post added at 10:56 AM ---------- Previous post was at 10:36 AM ----------
BJack0 said:
When ever I think I have the process memories and I follow the steps on my screen I still somehow **** this up and I cant understand how.
My current steps include
Flash the fastboot with the ROM that you linked me in my first post
Flash the recovery with TWRP (Every time I have then tried going back into TWRP is failed to work and prompted the original MIUI recovery)
Install the TWRP zip from custom recovery to try and fix the issue above (Only had this work once on orangefox and then never had success again)
So now I try to just flash the recovery and boot to it using CMD and it works fine
Move the lineageOS files from my PC to the phone SDCard
If I wipe data and the caches as suggested then the lineageOS zip is now go and I am back to flashing the fastboot ROM to restart the process
I know this might seem like im either stupid or just not getting it but could you or anyone else please make a bullet pointed list with links to what I have to download in order to actually achieve this since I cant do anything correctly even when trying to follow the steps.
(Im going to sleep since I have been trying to do this for hours now and I will check reply's in the morning.
Thanks for the help so far EVERYONE
Click to expand...
Click to collapse
It's sounds like the main issue is stock recovery is being restored. This is something that MIUI will do when it boots up.
When you first install TWRP you cannot boot into MIUI before booting to TWRP as you instantly lose TWRP. So you need to boot into TWRP first in order to do something to prevent it being overwritten.
Options are
1
Code:
fastboot boot TWRP.img
2 Use the button combo whilst still in fastboot - power and vol+, hold both until the phone vibrates and the initial logo appears.
Now to keep TWRP you need to either flash a custom ROM, flash Magisk or flash the dm-verity script.
In your case you want to flash LOS, so now you've booted into TWRP go ahead and continue with the steps given.
Also, wait until after you've formatted data before copying everything over. You can access the phone as an MTP device when in TWRP, so you'll be able to connect it to a PC and drag everything across, or you can stick everything on a USB OTG pen, if you have one, TWRP can read data from them too.
It's sounds like the main issue is stock recovery is being restored. This is something that MIUI will do when it boots up.
When you first install TWRP you cannot boot into MIUI before booting to TWRP as you instantly lose TWRP. So you need to boot into TWRP first in order to do something to prevent it being overwritten.
Options are
1
Code:
fastboot boot TWRP.img
2 Use the button combo whilst still in fastboot - power and vol+, hold both until the phone vibrates and the initial logo appears.
Now to keep TWRP you need to either flash a custom ROM, flash Magisk or flash the dm-verity script.
In your case you want to flash LOS, so now you've booted into TWRP go ahead and continue with the steps given.
Also, wait until after you've formatted data before copying everything over. You can access the phone as an MTP device when in TWRP, so you'll be able to connect it to a PC and drag everything across, or you can stick everything on a USB OTG pen, if you have one, TWRP can read data from them too.
Click to expand...
Click to collapse
The exact problem I have is that I cant transfer any files to the device after formatting the data. I follow the steps correctly and I get into TWRP successfully and then everyone has told me to format the data then install lineage but I cant install the OS if formatting the data removes it.
Get device into fastboot
Flash revocery with TWRP
power the device off
hold volume up and power
boot into custom recovery
format data
move lineageOS onto my device
install lineageOS
reboot
done.
This is the list of exact actions I am doing with no results is there something I am missing or something that is in the wrong order.
BJack0 said:
The exact problem I have is that I cant transfer any files to the device after formatting the data. I follow the steps correctly and I get into TWRP successfully and then everyone has told me to format the data then install lineage but I cant install the OS if formatting the data removes it.
Get device into fastboot
Flash revocery with TWRP
power the device off
hold volume up and power
boot into custom recovery
format data
move lineageOS onto my device
install lineageOS
reboot
done.
This is the list of exact actions I am doing with no results is there something I am missing or something that is in the wrong order.
Click to expand...
Click to collapse
You connect your phone to computer while in recovery to transfer the OS zip
Sent from my Redmi K20 Pro using Tapatalk
BJack0 said:
The exact problem I have is that I cant transfer any files to the device after formatting the data. I follow the steps correctly and I get into TWRP successfully and then everyone has told me to format the data then install lineage but I cant install the OS if formatting the data removes it.
Get device into fastboot
Flash revocery with TWRP
power the device off
hold volume up and power
boot into custom recovery
format data
move lineageOS onto my device
install lineageOS
reboot
done.
This is the list of exact actions I am doing with no results is there something I am missing or something that is in the wrong order.
Click to expand...
Click to collapse
After format data, reboot your device into recovery again and transfer LOS, gapps and all files you need.
Format data kills the storage.
I always used to reboot from TWRP back in to TWRP after formatting data, but I've recently seen someone saying that they just unmount data then remount it again. I haven't tried it myself but it certainly makes sense and would be quicker too.
Robbo.5000 said:
I always used to reboot from TWRP back in to TWRP after formatting data, but I've recently seen someone saying that they just unmount data then remount it again. I haven't tried it myself but it certainly makes sense and would be quicker too.
Click to expand...
Click to collapse
Yes I did that and it worked, unmounting and remounting helps detect the storage in PC
Sent from my Redmi K20 Pro using Tapatalk
Robbo.5000 said:
I always used to reboot from TWRP back in to TWRP after formatting data, but I've recently seen someone saying that they just unmount data then remount it again. I haven't tried it myself but it certainly makes sense and would be quicker too.
Click to expand...
Click to collapse
Yes that works. Tried it myself but prefer to reboot into recovery again.:laugh:
Finally Successful
After a long post I have finally finished the process successfully. This was pretty educational for me since I didn't understand any of this at the start I would like to thank everyone who reply's and all the information that you have provided.
need help guys, i stuck in bootloop.
- fastboot rom global china V10.3.17.0 PFKCNXM
- fastboot twrp 3.3.1
- format data
- flash vendor image cn 10.4.6.0
- wipe cache/dalvik
- flash lineage os
- flash gapps nano
- reboot
- stuck bootloop
Hi all,
I was on xiaomi.eu MIUI 11 ROM for some time, but wanted to switch to either Evolution or Syberia ROM.
I did a complete wipe and installed evolution os trough twrp... but i forgot to remove encryption so i bricked my device...
So then, I flashed the latest stock rom (11.05)with Xiaomi flash tool, but then i was stuck with the chinese ROM so...
1. I went back to bootloader and flashed mauronofrio's TWRP recovery .
2. completely wiped phone; Cache,System,Data,Internal storage
3. copied Evolution OS 4.1 to my phone
4. installed zip trough TWRP, all successfull
5. but then when rebooting, TWRP says:"No OS installed, do you wish to continue"
6. i tried other ROMs like xiaomi.eu and syberia, but these would either give me the same problem, or just bootloop until iam back in the fastboot screen...
Anyone any idea what iam doing wrong?
dev-DaT said:
Hi all,
I was on xiaomi.eu MIUI 11 ROM for some time, but wanted to switch to either Evolution or Syberia ROM.
I did a complete wipe and installed evolution os trough twrp... but i forgot to remove encryption so i bricked my device...
So then, I flashed the latest stock rom (11.05)with Xiaomi flash tool, but then i was stuck with the chinese ROM so...
1. I went back to bootloader and flashed mauronofrio's TWRP recovery .
2. completely wiped phone; Cache,System,Data,Internal storage
3. copied Evolution OS 4.1 to my phone
4. installed zip trough TWRP, all successfull
5. but then when rebooting, TWRP says:"No OS installed, do you wish to continue"
6. i tried other ROMs like xiaomi.eu and syberia, but these would either give me the same problem, or just bootloop until iam back in the fastboot screen...
Anyone any idea what iam doing wrong?
Click to expand...
Click to collapse
This works for me every time.
1 Flash the latest fastboot ROM.
2 Flash TWRP (same one you used)
3 Boot into TWRP (use the vol+ button when booting)
4 In format menu swipe to factory reset, then format data (VERY IMPORTANT this must be FORMAT not just wipe)
5 In reboot menu boot into recovery, this ensures TWRP correctly accesses the newly formatted data partition.
6 Copy over the ROM (and GApps, if needed and/or Magisk)
7 Flash the ROM, (then GApps if needed)
8 Boot into system and do the initial setup
9 If installing Magisk, boot back to TWRP and install Magisk.
There is no need to wipe anything else. There is no need to wipe anything again after installing. There is no need to disable encryption or dm-verity.
Robbo.5000 said:
This works for me every time.
1 Flash the latest fastboot ROM.
2 Flash TWRP (same one you used)
3 Boot into TWRP (use the vol+ button when booting)
4 In format menu swipe to factory reset, then format data (VERY IMPORTANT this must be FORMAT not just wipe)
5 In reboot menu boot into recovery, this ensures TWRP correctly accesses the newly formatted data partition.
6 Copy over the ROM (and GApps, if needed and/or Magisk)
7 Flash the ROM, (then GApps if needed)
8 Boot into system and do the initial setup
9 If installing Magisk, boot back to TWRP and install Magisk.
There is no need to wipe anything else. There is no need to wipe anything again after installing. There is no need to disable encryption or dm-verity.
Click to expand...
Click to collapse
thanks, i always thought that a wipe was sufficient, or at least equal to a format... anyways will report back later when i have time to try it. lets hope it works because i can't handle this chinese rom
dev-DaT said:
thanks, i always thought that a wipe was sufficient, or at least equal to a format... anyways will report back later when i have time to try it. lets hope it works because i can't handle this chinese rom
Click to expand...
Click to collapse
The format is needed to temporarily remove encryption
I've just remembered that I missed an important step. Call it step 1.5
If you going to flash immediately after flashing official MIUI you must boot into MIUI once before doing anything else. You don't need to go through the set-up, you can boot immediately into fastboot after you get to the initial set-up page. The first boot finalises the install and is needed before you flash over the top of it. That may be the cause of your issue if you had missed this before.
Robbo.5000 said:
The format is needed to temporarily remove encryption
I've just remembered that I missed an important step. Call it step 1.5
If you going to flash immediately after flashing official MIUI you must boot into MIUI once before doing anything else. You don't need to go through the set-up, you can boot immediately into fastboot after you get to the initial set-up page. The first boot finalises the install and is needed before you flash over the top of it. That may be the cause of your issue if you had missed this before.
Click to expand...
Click to collapse
Ok so i flashed TWRP again, rebooted to stock rom and then rebooted into recovery, but the stock recovery is still there.
When i flash TWRP and reboot into recovery immediately i can enter TWRP, but if i reboot the phone to MIUI and then reboot again, TWRP is gone again...
It seems like TWRP does not persist... now iam stuck again on fastboot screen because i wiped + formatted everything.
Edit:
When i want to flash recovery it says "OKAY" but it is unable to boot:
Sending 'recovery' (65536 KB) OKAY [ 1.562s]
Writing 'recovery' OKAY [ 0.333s]
Finished. Total time: 1.989s
Sending 'boot.img' (65536 KB) OKAY [ 1.547s]
Booting FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
fastboot: error: Command failed
dev-DaT said:
Ok so i flashed TWRP again, rebooted to stock rom and then rebooted into recovery, but the stock recovery is still there.
When i flash TWRP and reboot into recovery immediately i can enter TWRP, but if i reboot the phone to MIUI and then reboot again, TWRP is gone again...
It seems like TWRP does not persist... If i wipe all data trough TWRP and then reboot, i don't have OS but i do reboot back into TWRP, because well, there is nothing else...
Click to expand...
Click to collapse
This is normal, MIUI will restore stock recovery of the recovery partition changes. In order to persist TWRP you need to either install Magisk, disable dm-verity or install a custom ROM.
If you are going to flash a custom ROM, then you should do so immediately after flashing TWRP.
After formatting data, TWRP has an issue seeing the data partition, so go to the reboot menu in TWRP and select to reboot to recovery.
Then you can immediately install the ROM of choice. You cannot boot back into system as you'll lose TWRP.
Robbo.5000 said:
This is normal, MIUI will restore stock recovery of the recovery partition changes. In order to persist TWRP you need to either install Magisk, disable dm-verity or install a custom ROM.
If you are going to flash a custom ROM, then you should do so immediately after flashing TWRP.
After formatting data, TWRP has an issue seeing the data partition, so go to the reboot menu in TWRP and select to reboot to recovery.
Then you can immediately install the ROM of choice. You cannot boot back into system as you'll lose TWRP.
Click to expand...
Click to collapse
Ok, it appears that everytime i wipe system, i am not able to boot anymore into TWRP... Am i supposed to wipe System? or only wipe data & format data
dev-DaT said:
Ok, it appears that everytime i wipe system, i am not able to boot anymore into TWRP... Am i supposed to wipe System? or only wipe data & format data
Click to expand...
Click to collapse
There is no need to wipe system. You only need to wipe cache and dalvik and format data. (I choose to factory reset because it's easier in TWRP, but you could do advanced wipe and select cache and dalvik, then format data. Follow the steps exactly, but include my later step 1.5
I've just followed this myself today, as I've moved from LOS to the latest unofficial Havoc build.
In theory you could start by booting to fastboot and flashing TWRP again, then follow the steps from that point. You probably don't need to install MIUI.
Robbo.5000 said:
There is no need to wipe system. You only need to wipe cache and dalvik and format data. (I choose to factory reset because it's easier in TWRP, but you could do advanced wipe and select cache and dalvik, then format data. Follow the steps exactly, but include my later step 1.5
I've just followed this myself today, as I've moved from LOS to the latest unofficial Havoc build.
In theory you could start by booting to fastboot and flashing TWRP again, then follow the steps from that point. You probably don't need to install MIUI.
Click to expand...
Click to collapse
Ok thanks a lot! So no need to wipe system partition after stock rom install. just wipe cache/dalvik/data, got it.
Most ROM install guides tell you to wipe /system when coming from stock rom. I guess this requirement has changed? or depends on what ROM you're coming from?
Use can use my guide
https://forum.xda-developers.com/k20-pro/how-to/simple-beginners-guide-to-raphaelin-t4020543
it has how to flash roms, and fastboot fix. (which tells why the Recovery isn't staying)
Robbo.5000 said:
This works for me every time.
1 Flash the latest fastboot ROM.
2 Flash TWRP (same one you used)
3 Boot into TWRP (use the vol+ button when booting)
4 In format menu swipe to factory reset, then format data (VERY IMPORTANT this must be FORMAT not just wipe)
5 In reboot menu boot into recovery, this ensures TWRP correctly accesses the newly formatted data partition.
6 Copy over the ROM (and GApps, if needed and/or Magisk)
7 Flash the ROM, (then GApps if needed)
8 Boot into system and do the initial setup
9 If installing Magisk, boot back to TWRP and install Magisk.
There is no need to wipe anything else. There is no need to wipe anything again after installing. There is no need to disable encryption or dm-verity.
Click to expand...
Click to collapse
I need help... The reason why I'm flashing custom rom is, when the latest update came MIUI 12.5 android 11, all sensors of my phone stopped working like (Gyroscope, accelerometer, proximity sensor) I tied to flash the rom by fastboot method but still the problem persists. because of that I unlocked bootloader and flashed twrp. After flashing custom rom when I tried to boot it, it stuck on booting screen and when I tried to reboot into recovey it is showing fastboot mode. I'm unable to boot into custom rom.
dev-DaT said:
Hi all,
I was on xiaomi.eu MIUI 11 ROM for some time, but wanted to switch to either Evolution or Syberia ROM.
I did a complete wipe and installed evolution os trough twrp... but i forgot to remove encryption so i bricked my device...
So then, I flashed the latest stock rom (11.05)with Xiaomi flash tool, but then i was stuck with the chinese ROM so...
1. I went back to bootloader and flashed mauronofrio's TWRP recovery .
2. completely wiped phone; Cache,System,Data,Internal storage
3. copied Evolution OS 4.1 to my phone
4. installed zip trough TWRP, all successfull
5. but then when rebooting, TWRP says:"No OS installed, do you wish to continue"
6. i tried other ROMs like xiaomi.eu and syberia, but these would either give me the same problem, or just bootloop until iam back in the fastboot screen...
Anyone any idea what iam doing wrong?
Click to expand...
Click to collapse
Bro I have one doubt, I installed pixel os successfully then I roll back into stock os(miui) with locking bootloader, the. Again I unlock bootloader successfully, but the problem is I am unable to install os, i tried wipe data, catch. But the stock rom was not removed. What can I do?
Using orange fox in resmi note 10 pro
Hello there,
I'm using the Xiaomi.eu latest Beta rom ATM. I'm trying to flash other roms (like lineage OS 17.1 for example) but it seems to reboot to fastboot everytime. I've tried doing a clean flash, formatting data, dirty flashing. Nothing seems to help it boot into the new rom.
Clearly I'm doing something wrong. If I try flashing the recommended Chinese vendor firmware (stable version), I get an error 7..but my TWRP is up to date as recommended.
If anyone has any idea where I'm going wrong, that would help a lot.
Thanks
therightperson_630 said:
Hello there,
I'm using the Xiaomi.eu latest Beta rom ATM. I'm trying to flash other roms (like lineage OS 17.1 for example) but it seems to reboot to fastboot everytime. I've tried doing a clean flash, formatting data, dirty flashing. Nothing seems to help it boot into the new rom.
Clearly I'm doing something wrong. If I try flashing the recommended Chinese vendor firmware (stable version), I get an error 7..but my TWRP is up to date as recommended.
If anyone has any idea where I'm going wrong, that would help a lot.
Thanks
Click to expand...
Click to collapse
Don't know what your doing wrong, but this is my failsafe method should nothing else work.
Flash the latest Chinese 11.0.5 fastboot ROM. Make sure you don't lock the bootloader if using the Mi Flash Tool.
Boot into MIUI once to allow it to finalise the install, you don't need to do the initial phone setup once it boots into MIUI.
Boot into fastboot and install TWRP. I recommend the latest from mauronofrio which should be 3.1.1-32
Boot immediately into TWRP. I use the volume up button while powering up the phone.
Perform a factory reset in TWRP (using the swipe button), then format data (need to type 'yes' to confirm).
Reboot into TWRP using the TWRP boot menu, this ensures the newly formatted data partition is correctly mounted.
Copy over the ROM you want and GApps if needed, then flash.
Boot into your new ROM, everything should be OK. Then boot back into TWRP to install Magisk if you want root.
Yep that seems to have done the trick. At first I was getting frustrated because I thought I was downloading the right Chinese ROM, turns out I was downloading the recovery version instead of the fastboot one.
I think it wasn't working because I was on the beta channel. Switching over to the stable channel meant I had to go through a fastboot flash apparently. I've seen this before on my OP3.
Got lineage OS loaded, thanks for your help!
Hello,
I've installed twrp 3.4.0.1 via fastboot, but after I select yes when i'm asked about erasing my data, the phone just boot up normally without deleting any of my data, but does not enter twrp either. Tried 3.4.0.0 too, no luck. Only 3.3.1.0 worked, but when I try to backup it says something like 'can't mount system partition' and some other errors. I think that version is too old for my rom, so I'm afraid to use it for backup/flash. My phone is LG G6 H870, Android 9, software version V30b. The phone is not rooted, the bootloader is unlocked. Tried to erase cache partition and install twrp 3.4.01 again, didn't work. I can't install Skyhawk or Orangefox becuase I can't use twrp.
Is anybody facing this problem too?
Thanks!
Bootloader unlocked?
Mendoo said:
Bootloader unlocked?
Click to expand...
Click to collapse
Yes
Thelock1 said:
Hello,
I've installed twrp 3.4.0.1 via fastboot, but after I select yes when i'm asked about erasing my data, the phone just boot up normally. Tried 3.4.0.0 too, no luck. Only 3.3.1.0 worked, but when I try to backup it says something like 'can't mount system partition', I think that version is too old for my rom. My phone is LG G6 H870, Android 9, software version V30b. My phone is not rooted.
Is anybody facing this problem too?
Thanks!
Click to expand...
Click to collapse
HI You need to use OrangeFox recovery or SkyHawk. If you plan to go to 10, then you need SkyHawk. And I think SkyHawk is maintained but OrangeFox not.
Links:
SkyHawk https://sourceforge.net/projects/pa-g6/files/Releases/SHRP/20.07.2020/H870/
OrangeFox https://forum.xda-developers.com/lg-g6/development/recovery-orangefox-recovery-project-t3943594
jis251 said:
HI You need to use OrangeFox recovery or SkyHawk. If you plan to go to 10, then you need SkyHawk. And I think SkyHawk is maintained but OrangeFox not.
Links:
SkyHawk https://sourceforge.net/projects/pa-g6/files/Releases/SHRP/20.07.2020/H870/
OrangeFox https://forum.xda-developers.com/lg-g6/development/recovery-orangefox-recovery-project-t3943594
Click to expand...
Click to collapse
So can I install SkyHawk via fastboot over stock recovery without installing twrp beforehand? I see there are multiple files in the shyhawk zip, should I only extract the recovery img and install it via fastboot? I'm kinda new to this, thanks!
Thelock1 said:
So can I install SkyHawk via fastboot over stock recovery without installing twrp beforehand? I see there are multiple files in the shyhawk zip, should I only extract the recovery img and install it via fastboot? I'm kinda new to this, thanks!
Click to expand...
Click to collapse
HI. It is made to flash in TWRP (same as OrangFox) So I really don't know if that recovery.img flashing through Fastboot works. Never tried, sorry.
Maybe someone knows though.
jis251 said:
HI. It is made to flash in TWRP (same as OrangFox) So I really don't know if that recovery.img flashing through Fastboot works. Never tried, sorry.
Maybe someone knows though.
Click to expand...
Click to collapse
Ok, thanks, I'll try to find a solution, or maybe I'll just wait for the next version of twrp.
You should try installing the recovery and immediately installing any custom rom, when i flashed twrp the first time i had to do it several times cause somehow it got "erased" every time i noot the stock OS.
Ig you don't want to install a custom rom try right after installing twrp and on the fastboot screen to reboot to recovery with (Volume - ) button and power.
I think the idea is not letting the Stock os boot
Also that error. i have the same problem, the only moment it doesn't appear is when you wipe all data with the "Format Data" option inside "Wipe" menu in twrp.
After you boot to the OS once and go back to recovery it will come again everytime you flash something.
Not sure if its a problem or not, because i've dirty installed some updates and also installed gapps and magisk even with that error.
Im currently in A10 using Havoc and NikGapps.
TWRP 3.2.3-0
AlejandroMota said:
You should try installing the recovery and immediately installing any custom rom, when i flashed twrp the first time i had to do it several times cause somehow it got "erased" every time i noot the stock OS.
Ig you don't want to install a custom rom try right after installing twrp and on the fastboot screen to reboot to recovery with (Volume - ) button and power.
I think the idea is not letting the Stock os boot
Also that error. i have the same problem, the only moment it doesn't appear is when you wipe all data with the "Format Data" option inside "Wipe" menu in twrp.
After you boot to the OS once and go back to recovery it will come again everytime you flash something.
Not sure if its a problem or not, because i've dirty installed some updates and also installed gapps and magisk even with that error.
Im currently in A10 using Havoc and NikGapps.
TWRP 3.2.3-0
Click to expand...
Click to collapse
Yes, I know I have to install twrp again every time I let the stock rom boot, but the only version of twrp working is 3.2.3 and I think that was released before the G6 received official Android 9 update, so that's why I'm not very confident using it. I've tried to enter recovery immediately after I've installed it, so I don't think that's the problem.
I have the same problem on the LG G6 H870. I won't get to TWRP. I tried several versions of TWRP and nothing.
Edit.
This twrp is functional:
https://androidfilehost.com/?w=files&flid=289997
After installation using fastboot, restart directly to twrp using power+vol. down.
Finally i've successfully flashed Skyhawk using TWRP 3.3.1, so thanks everyone for advice!
Still couldn't make official TWRP 3.4.0/3.4.0.1 work.
Update TWRP 3.1 to 3.4 problem
Thelock1 said:
Finally i've successfully flashed Skyhawk using TWRP 3.3.1, so thanks everyone for advice!
Still couldn't make official TWRP 3.4.0/3.4.0.1 work.
Click to expand...
Click to collapse
Hi, I don't know if this goes here, I hope you can help me, I update twrp from version 3.1 to 3.4 and now I can't access twrp, how can I fix it?
Hello again, I answer myself, and if it helps someone else, using adb fastboot with twrp 3.2 Melina solves it and twrp works perfectly again.