Related
Hey folks,
NOTE: SOLVED, update below
On my VTR-L09 Single Sim, I flashed TWRP to edit /vendor/etc/hosts and then flashed recovery again. I went a wrong path there and had to flash the original recovery in order to do a factory reset & wipe. My /data-Partition was broken during the process, too, because I was accidentally wiped it
After the fresh wipe, I started the phone again and after it loaded, configured it (without restoring from my backup) and after a couple of seconds my camera app disappeared from the home screen. Dafuq? Since then, I tried to recover it a couple of times.
I am now hoping that the B126-Update brings my camera app back when it arrives via OTA, but until then:
Does anyone have an Idea where my camera app went, and how I can get it back?
Obviously, I checked under the disabled apps.
Thanks for sharing your thoughts
I am on VTR-L09C432B123
UPDATE: I worked out a way of re-flashing an official update without funkyhuawei, check out https://forum.xda-developers.com/p10/development/dev-introducing-redlotus-source-huawei-t3601493
Did you try to install another camera app to see if the camera turn on? it's possible that the data folder of camera to be erased.
Lukx said:
Hey folks,
On my VTR-L09 Single Sim, I flashed TWRP to edit /vendor/etc/hosts and then flashed recovery again. I went a wrong path there and had to flash the original recovery in order to do a factory reset & wipe. My /data-Partition was broken during the process, too, because I was accidentally wiped it
After the fresh wipe, I started the phone again and after it loaded, configured it (without restoring from my backup) and after a couple of seconds my camera app disappeared from the home screen. Dafuq? Since then, I tried to recover it a couple of times.
I am now hoping that the B126-Update brings my camera app back when it arrives via OTA, but until then:
Does anyone have an Idea where my camera app went, and how I can get it back?
Obviously, I checked under the disabled apps.
Thanks for sharing your thoughts
I am on VTR-L09C432B123
Click to expand...
Click to collapse
Have you tried the HiSuite system restore option. I never used it. But if it works like the restore option from Samsung and Sony. You should restart your phone in recovery mode and the original firmware will be flashed?
Hey
thanks for your answers.
The hisuite does not support my model yet (argh).
OpenCamera works fine, whatsapp's camera feature as well....
The Gallery App is still there, by the way.
I'm having the same issue too after an unsuccessful root which required me to factory reset my P10. After factory rest the stock camera app is missing..
Could someone upload their stock camera backup file? It would be much appreciated.
I attached the HwCamera2 folder with apk, lib and oat folder from /system/priv-app.
I'm on VTR-L29C432B123.
Jannomag said:
I attached the HwCamera2 folder with apk, lib and oat folder from /system/priv-app.
I'm on VTR-L29C432B123.
Click to expand...
Click to collapse
Thanks for the file. May I know how do I get it installed?
I navigated through the same directory and found the same files as yours. I tried installing the apk file from both my own and yours but it says it is corrupted.
Thanks, @Jannomag. I have found that most other Huawei-Apps in that priv-app folder are also missing (except I am not entirely sad about many of those). I'll keep digging a bit.
*Update* I just found in my /etc/whitelistedapps.xml points to /vendor/etc/whitelistedapps.xml, which in turn does not exist.
could somebody with a working Camera app please check whether that file /vendor/etc/whitelistedapps.xml exists, and what is written in there?
This is just a straw I am holding on to, not a real trace or hint, though.
Lukx said:
Thanks, @Jannomag. I have found that most other Huawei-Apps in that priv-app folder are also missing (except I am not entirely sad about many of those). I'll keep digging a bit.
*Update* I just found in my /etc/whitelistedapps.xml points to /vendor/etc/whitelistedapps.xml, which in turn does not exist.
could somebody with a working Camera app please check whether that file /vendor/etc/whitelistedapps.xml exists, and what is written in there?
This is just a straw I am holding on to, not a real trace or hint, though.
Click to expand...
Click to collapse
Hy Lukx, i have exactly the same problem. Wanted to root my phone, but I couldnt see the zip file in twrp, so i wiped whole data and did formatting the whole phone. after reboot my camera app was gone, also the themes were disappeared. I tried installing the firmware for my huawei (from a russian site but I dont know if its the right firmware) but it stopped at 5%.
My Phones Build Number is: VTR-L09C432B113
Thanks
stilla98
Funny thing... I am suspecting that some version mismatch of the recovery or boot partition during the Wipe might be the cause, although I do not have any proof of that.
I am currently trying to write a free alternative to funkyhuawei, so we can flash the full firmware easily again. I think i won't be done with that before mid next week, though...
I am using the OpenCamera app in the meantime.
Lukx said:
Funny thing... I am suspecting that some version mismatch of the recovery or boot partition during the Wipe might be the cause, although I do not have any proof of that.
I am currently trying to write a free alternative to funkyhuawei, so we can flash the full firmware easily again. I think i won't be done with that before mid next week, though...
I am using the OpenCamera app in the meantime.
Click to expand...
Click to collapse
So you are telling me, that the funkyhuawei method works? I saw that my Version is supported. Should I try it?
Thanks
stilla98 said:
So you are telling me, that the funkyhuawei method works? I saw that my Version is supported. Should I try it?
Thanks
Click to expand...
Click to collapse
I didn't say that
But as FH reflashes your phone fully, it should do a full recovery. If you feel like investing money into that, why not try? Otherwise, I recommend you wait along with me for another week and see how far I get with my approach, which I promise to release for free...
Lukx said:
I didn't say that
But as FH reflashes your phone fully, it should do a full recovery. If you feel like investing money into that, why not try? Otherwise, I recommend you wait along with me for another week and see how far I get with my approach, which I promise to release for free...
Click to expand...
Click to collapse
Okay , i will wait for it. I will also install the opencamera app.. by the way, do you also have problems with the design? im having only one design and i cannot add more..
stilla98 said:
im having only one design and i cannot add more..
Click to expand...
Click to collapse
I never really use the theme feature, as I have found "my" favorite theme initially and it's now in the Huawei Backup I carry around through reflashes (highly recommended, it stores on SD card). But the "Designs" app seems to show me a couple of designs, yes. I don't want to try downloading them right now, though.
Lukx said:
I never really use the theme feature, as I have found "my" favorite theme initially and it's now in the Huawei Backup I carry around through reflashes (highly recommended, it stores on SD card). But the "Designs" app seems to show me a couple of designs, yes. I don't want to try downloading them right now, though.
Click to expand...
Click to collapse
okay, i hadnt a microsd card since yesterday, i also backed up my phone before wiping and formatting but there are still no themes, i will try installing them on sd card.. thank you for your help
just install via fastboot boot.img recovery.img cust.img system.img
i have same problem but i can fix it
Same problem
Lukx said:
Hey folks,
NOTE: SOLVED, update below
On my VTR-L09 Single Sim, I flashed TWRP to edit /vendor/etc/hosts and then flashed recovery again. I went a wrong path there and had to flash the original recovery in order to do a factory reset & wipe. My /data-Partition was broken during the process, too, because I was accidentally wiped it
After the fresh wipe, I started the phone again and after it loaded, configured it (without restoring from my backup) and after a couple of seconds my camera app disappeared from the home screen. Dafuq? Since then, I tried to recover it a couple of times.
I am now hoping that the B126-Update brings my camera app back when it arrives via OTA, but until then:
Does anyone have an Idea where my camera app went, and how I can get it back?
Obviously, I checked under the disabled apps.
Thanks for sharing your thoughts
I am on VTR-L09C432B123
UPDATE: I worked out a way of re-flashing an official update without funkyhuawei, check out https://forum.xda-developers.com/p10/development/dev-introducing-redlotus-source-huawei-t3601493
Click to expand...
Click to collapse
I have the same problem with my Huawei p10, don't have the camera apk but I can use with the open camera. did you fix the problem? Thank you
been there done that
Guy all you need is follow step on this link to restock rom and start unlock bootloader again
You can try to restore factory settings.
Hello,
As a preface I have to say I'm less than a newbie in this matter.
My Huawei P8 Lite 2017 (PRA-LX1) had problems with lack of internal memory, so I decided to find a solution.
Following suggestions coming from some forums, I decided to root the phone to move the apps to an external microSD card and free the internal memory.
I got the unlock code and I used Multi-Tool for Huawei v.8.0.7.1 to root the phone.
After rooting I found in my phone only few apps and even Google App Store and keyboard were missing. To fix this last problem I downloaded and installed Gboard apk and then Firefox (no browser ar all in the phone).
Nevertheless, I can't even setup the Google account in the phone because in account settings is not available any Google option.
I'd like to setup the phone to install the apps and then change partitions and move the apps to the external SD card.
These are the installations I applied via the Multi-Tool:
- TWRP-3.1.1-2_by_greatslon.zip
- SR1-SuperSU-v2.82.zip
Please, could you help me on try to fix this issue?
I'm available even to do everything from the beginning if better, but I need to fix this issue.
Thank you very much in advance for any help.
Bets regards,
GP
Hi,
You need to format data using eRecovery. Flash it back if you have twrp, format user data then flash twrp and root etc..
Cosmox_ said:
Hi,
You need to format data using eRecovery. Flash it back if you have twrp, format user data then flash twrp and root etc..
Click to expand...
Click to collapse
Could you write me the link to the original firmware ROM? If needed, how can I get the IMEI number for my phone from the TWRP? Is it possible? I think is needed to identify the single/dual sim model, is it right?
At the moment, after trying to restore the phone, I can only get access to the TWRP. The phone is bricked :'-(
Thanks,
GP
granpinguino said:
Could you write me the link to the original firmware ROM? If needed, how can I get the IMEI number for my phone from the TWRP? Is it possible? I think is needed to identify the single/dual sim model, is it right?
At the moment, after trying to restore the phone, I can only get access to the TWRP. The phone is bricked :'-(
Thanks,
GP
Click to expand...
Click to collapse
Hello,
is there anyone who can help me on restoring my phone?
At the moment I can only use the TWRP to try to fix it.
Might you write me the link to the stock firmware ROM and a step by step procedure to restore it?
I thank you in advance for any help you would give me.
GP
I recommend you to look at htc mania for a ROM (you can find the phone there as Huawei P9Lite 2017, altough I can't say for sure that the phones are exactly identical so I don't know if it will work for you but gsm arena says that they are the same phones with different names). I'm on mobile right now, sorry can't give you the link.
I need to ask you (unrelated to your problem), what command did you use when installing TWRP?
Jhon_Locke said:
I recommend you to look at htc mania for a ROM (you can find the phone there as Huawei P9Lite 2017, altough I can't say for sure that the phones are exactly identical so I don't know if it will work for you but gsm arena says that they are the same phones with different names). I'm on mobile right now, sorry can't give you the link.
I need to ask you (unrelated to your problem), what command did you use when installing TWRP?
Click to expand...
Click to collapse
Hello Jhon_Locke,
first of all, thank you very much for your answer to my message. I'm going to check htc mania to try to fix my issue.
About TWRP installation, I used Multi-Tool for Huawei and Honor v. 8 to install TWRP in my phone, so I didn't use a direct command.
Thank you very much again!
GP
Hi, I flashed via ODIN all 4 files of latest JULY PATCH and after that, I lose root and cant install TWRP, I had OEM UNBLOCK ON before all this, and it still showing OEM UNBLOCK on developers, I tried wiping, flashing others firmwares from others countrys, turned off oem, wiped, go recovery, wiped, install new firmware via odin, still OEM UNBLOCK show on developer and KG STATE still PRENORMAL
NONE REPLY? meh
Hey not sure if any of you on THIS thread could answer my question but my note 8 n950u is not rooted at all but i noticed today that in my stock bootloader i have the option of mount/ system, what would it do if i clicked it? I thought that was only available with a phone that's rooted. Just curious.
truenitos said:
NONE REPLY? meh
Click to expand...
Click to collapse
I really tried to help you, but u seems don't checking you msgs, good luck
Superloud024 said:
Hey not sure if any of you on THIS thread could answer my question but my note 8 n950u is not rooted at all but i noticed today that in my stock bootloader i have the option of mount/ system, what would it do if i clicked it? I thought that was only available with a phone that's rooted. Just curious.
Click to expand...
Click to collapse
Nothing will happen.
truenitos said:
Hi, I flashed via ODIN all 4 files of latest JULY PATCH and after that, I lose root and cant install TWRP, I had OEM UNBLOCK ON before all this, and it still showing OEM UNBLOCK on developers, I tried wiping, flashing others firmwares from others countrys, turned off oem, wiped, go recovery, wiped, install new firmware via odin, still OEM UNBLOCK show on developer and KG STATE still PRENORMAL
Click to expand...
Click to collapse
friend already solved the problem? help please, I have the same problem
Anyone has a fix for this? Can not flash, install twrp, wait 7 days, could not solve. This is a pain in the ass
ZeroXO said:
I really tried to help you, but u seems don't checking you msgs, good luck
Click to expand...
Click to collapse
Hi Can You help me m8?
same binary 7
There os no solution. That's the problem. We are stuck with ****y shamesung !!!
ZeroXO said:
I really tried to help you, but u seems don't checking you msgs, good luck
Click to expand...
Click to collapse
Need help with similar problem, Samsung S8 plus g55f
Iamnon binary 8 which is December update and the **** Samsung is not making kg state to normal or checking stuck at prenormal
Hiya. So, here's the story:
Xiaomi Mi 9T Pro EEA, bought from Amazon, not a shady reseller
I made a Google Backup of my apps, because I decided to try out some Android 11 roms.
After trying them out, I wanted to go back to Android 10, so I clean flashed my rom, GApps and disable force encrypt, the usual stuff. But the Google Backup, that I previously used on all the A11 roms was suddenly gone.
I thought, that wouldn't be a problem, since I still had my Android 10 TWRP Backup that I made, before I started experimenting with A11.
I restored that backup and couldn't unlock my phone. So I deleted /data/system/locksettings.db and finally my phone would unlock.
But: My sensors didn't work anymore. I searched the internet for info and found out, that my persist partition got corrupted.
tl; dr: I restored a TWRP backup and my Persist partition corrupted.
Until yesterday, I didn't even know, what the Persist partition was. I never touched it.
I know how to get my sensors working again. But I guess my Widevine L1 is gone now, isn't it?
Seki_ said:
Hiya. So, here's the story:
Xiaomi Mi 9T Pro EEA, bought from Amazon, not a shady reseller
I made a Google Backup of my apps, because I decided to try out some Android 11 roms.
After trying them out, I wanted to go back to Android 10, so I clean flashed my rom, GApps and disable force encrypt, the usual stuff. But the Google Backup, that I previously used on all the A11 roms was suddenly gone.
I thought, that wouldn't be a problem, since I still had my Android 10 TWRP Backup that I made, before I started experimenting with A11.
I restored that backup and couldn't unlock my phone. So I deleted /data/system/locksettings.db and finally my phone would unlock.
But: My sensors didn't work anymore. I searched the internet for info and found out, that my persist partition got corrupted.
tl; dr: I restored a TWRP backup and my Persist partition corrupted.
Until yesterday, I didn't even know, what the Persist partition was. I never touched it.
I know how to get my sensors working again. But I guess my Widevine L1 is gone now, isn't it?
Click to expand...
Click to collapse
Yes, it's gone. Share what you did to get the sensors working.
mauam said:
Yes, it's gone. Share what you did to get the sensors working.
Click to expand...
Click to collapse
Unfortunate. Oh well.
There's actually multiple ways. You could:
Flash persist from Xiaomi's full fastboot package
Flash persistbak to persist
Flash a working persist image from another Mi 9T Pro
All those things worked for me. In the end, I settled with the persistbak method.
Seki_ said:
Unfortunate. Oh well.
There's actually multiple ways. You could:
Flash persist from Xiaomi's full fastboot package
Flash persistbak to persist
Flash a working persist image from another Mi 9T Pro
All those things worked for me. In the end, I settled with the persistbak method.
Click to expand...
Click to collapse
could you tell me how you flashed and dumped persistbak?
wavychris said:
could you tell me how you flashed and dumped persistbak?
Click to expand...
Click to collapse
It's almost been a year, so I don't fully remember what I did exactly, but there's some tutorials around you can find pretty easily.
The only thing I remember is going into fastboot and dumping and flashing my partitions via command line, I think.
Seki_ said:
It's almost been a year, so I don't fully remember what I did exactly, but there's some tutorials around you can find pretty easily.
The only thing I remember is going into fastboot and dumping and flashing my partitions via command line, I think.
Click to expand...
Click to collapse
ive been searching for a month and im still not sure which tutorial to follow, all i want is to fix my sensors and get widevine l1 back in case it gets void when i flash persist, any help would be phenomenal!
wavychris said:
ive been searching for a month and im still not sure which tutorial to follow, all i want is to fix my sensors and get widevine l1 back in case it gets void when i flash persist, any help would be phenomenal!
Click to expand...
Click to collapse
Well if you didn't make a backup before, L1 is L Gone. I didn't get it back. Following any tutorial should get you your sensors back though.
And remember: The first thing to do when getting a new phone is to backup that persist partition, so you don't need to worry about something like this happening again.
Seki_ said:
Well if you didn't make a backup before, L1 is L Gone. I didn't get it back. Following any tutorial should get you your sensors back though.
And remember: The first thing to do when getting a new phone is to backup that persist partition, so you don't need to worry about something like this happening again.
Click to expand...
Click to collapse
if i remember correctly you can get widevine l1 back via a magisk module or flashing xiaomi.eu rom and you can download the certificate from there, try it out if you dont got nothing to lose, by the way, if i flash persist will the sensors work permanently or do i have to do this again every once in a while?
wavychris said:
if i remember correctly you can get widevine l1 back via a magisk module or flashing xiaomi.eu rom and you can download the certificate from there, try it out if you dont got nothing to lose, by the way, if i flash persist will the sensors work permanently or do i have to do this again every once in a while?
Click to expand...
Click to collapse
Oh, interesting. Definitely gotta try that, thanks. How do you download the certificate in MIUI? Does it happen automatically?
Since I flashed my persistbak, I didn't flash anything else and my sensors are still working, so I guess it sporadically happens... sometimes?
Btw, if you aren't already, you should use OrangeFox recovery instead of TWRP on Xiaomi devices. It usually doesn't kill itself by wiping partitions or flashing roms, especially when coming from MIUI. Also, you can make persist backups with it. For some reason they removed that feature from TWRP.
Seki_ said:
Oh, interesting. Definitely gotta try that, thanks. How do you download the certificate in MIUI? Does it happen automatically?
Since I flashed my persistbak, I didn't flash anything else and my sensors are still working, so I guess it sporadically happens... sometimes?
Btw, if you aren't already, you should use OrangeFox recovery instead of TWRP on Xiaomi devices. It usually doesn't kill itself by wiping partitions or flashing roms, especially when coming from MIUI. Also, you can make persist backups with it. For some reason they removed that feature from TWRP.
Click to expand...
Click to collapse
in case you got it wrong xiaomi.eu is a custom miui based rom, not official, just to clarify that, and to download the certificate you must enroll fingerprint then go to fingerprint payments and youll find widevine l1 there, then click on certificate in widevine l1, pretty easy stuff, also how do i install orangefox?
wavychris said:
in case you got it wrong xiaomi.eu is a custom miui based rom, not official, just to clarify that, and to download the certificate you must enroll fingerprint then go to fingerprint payments and youll find widevine l1 there, then click on certificate in widevine l1, pretty easy stuff, also how do i install orangefox?
Click to expand...
Click to collapse
Oh, I can't read. For some reason, I thought you said xiaomi.eu or stock, that's why I said MIUI. Anyway, thanks for telling me. I never heard of that.
To install OrangeFox, just download the zip, make backups if you want to be extra sure and flash the zip. Here's the thread: https://forum.xda-developers.com/t/recovery-official-orangefox-recovery-project-r11-1.4308019/
The UI is different, so it took me a little while to get used to it, but ultimately, OrangeFox is a smoother experience than TWRP, at least on Xiaomi.
wavychris said:
if i remember correctly you can get widevine l1 back via a magisk module or flashing xiaomi.eu rom and you can download the certificate from there, try it out if you dont got nothing to lose, by the way, if i flash persist will the sensors work permanently or do i have to do this again every once in a while?
Click to expand...
Click to collapse
No, you cannot get L1 through Magisk module - because you need a (paid) certificate for your hardware
To the contrary, there is a Magisk module that disables L1, dropping you to default L3.
Although I never understood who/why needs that
wavychris said:
could you tell me how you flashed and dumped persistbak?
Click to expand...
Click to collapse
See here how to backup and/or dump Persist and restore/flash it back.
Of course, if you didn't backup a working Persist on time, you have nothing to restore:
Extracting stock Boot, Recovery and Persist images
Talking here about how to extract the stock Boot, Recovery and Persist images, needed in case of e.g. bootloop upon flashing Magisk or TWRP, to reflash the stock image(s). Also, boot image is needed for patching from Magisk Manager (and flashing...
forum.xda-developers.com
Seki_ said:
Oh, I can't read. For some reason, I thought you said xiaomi.eu or stock, that's why I said MIUI. Anyway, thanks for telling me. I never heard of that.
To install OrangeFox, just download the zip, make backups if you want to be extra sure and flash the zip. Here's the thread: https://forum.xda-developers.com/t/recovery-official-orangefox-recovery-project-r11-1.4308019/
The UI is different, so it took me a little while to get used to it, but ultimately, OrangeFox is a smoother experience than TWRP, at least on Xiaomi.
Click to expand...
Click to collapse
its alright lol, thanks for your help btw have a nice day/night
zgfg said:
No, you cannot get L1 through Magisk module - because you need a (paid) certificate for your hardware
To the contrary, there is a Magisk module that disables L1, dropping you to default L3.
Although I never understood who/why needs that
Click to expand...
Click to collapse
that sucks man, thanks for the news anyway i might use xiaomi.eu rom to get it back that way at least
zgfg said:
See here how to backup and/or dump Persist and restore/flash it back.
Of course, if you didn't backup a working Persist on time, you have nothing to restore:
Extracting stock Boot, Recovery and Persist images
Talking here about how to extract the stock Boot, Recovery and Persist images, needed in case of e.g. bootloop upon flashing Magisk or TWRP, to reflash the stock image(s). Also, boot image is needed for patching from Magisk Manager (and flashing...
forum.xda-developers.com
Click to expand...
Click to collapse
alright thanks i might try it out tommorow ill update you on the process if you want
Just randomly I noticed my 2nd sim slot isn't showing any longer. I use 2 sim card in my phone and just randomly I can longer enable it, as if the phone was never a dual sim? the Option in the settings have changed too. I have installed nor updated the phone. Restart or reboot don't help. Thanks
Further more the phone no longer shows any association with SIM 2, no imei, no phone 2 data, etc.As if the phone was a single sim only. Removing, reinstalling, doesn't help the case. Advice welcome please
Evo400 said:
Further more the phone no longer shows any association with SIM 2, no imei, no phone 2 data, etc.As if the phone was a single sim only. Removing, reinstalling, doesn't help the case. Advice welcome please
Click to expand...
Click to collapse
Start by updating the rom (13.0.37).
NOSS8 said:
Start by updating the rom (13.0.37).
Click to expand...
Click to collapse
would this be the reason? I also noticed that my portable hotspot has appeared in the menu while I was in connection and sharing menu before.
I'll try thr update, just have to figure how not to loose data, im also rooted
Evo400 said:
would this be the reason? I also noticed that my portable hotspot has appeared in the menu while I was in connection and sharing menu before.
I'll try thr update, just have to figure how not to loose data, im also rooted
Click to expand...
Click to collapse
Maybe not but the update can solve the problem especially with root.
Update with TWRP(zip rom not fastboot zip) and unroot before.
TWRP https://androidfilehost.com/?w=files&flid=326460
Is there a possibility to update via fastboot? I dont want to TWRP unless I have to? I tought TWRP wasnt possible on A12? Sorry to bother you but have you any links on TWRP how to?
Evo400 said:
Is there a possibility to update via fastboot? I dont want to TWRP unless I have to? I tought TWRP wasnt possible on A12? Sorry to bother you but have you any links on TWRP how to?
Click to expand...
Click to collapse
Now that there is a TWRP the roms are to be flashed with. (link on previous post).
https://forum.xda-developers.com/t/install-twrp-for-xiaomi-11t-pro.4398007/post-86472811
The TWRP link you posted for 12 Pro zeus, is this the latest one or I just found another one in the link below from xiaomi eu forums?
https://dl.akr-developers.com/?dir=skkk/TWRP/A12/v5.6_A12
Evo400 said:
The TWRP link you posted for 12 Pro zeus, is this the latest one or I just found another one in the link below from xiaomi eu forums?
https://dl.akr-developers.com/?dir=skkk/TWRP/A12/v5.6_A12
Click to expand...
Click to collapse
As you can see it was updated today.
Last question, it seems like magisk no longer works as some people have described and root is hard to achieve via TWRP.
Is your phone rooted on the lastest version of xiaomi eu for 12 Pro? thanks
Evo400 said:
Last question, it seems like magisk no longer works as some people have described and root is hard to achieve via TWRP.
Is your phone rooted on the lastest version of xiaomi eu for 12 Pro? thanks
Click to expand...
Click to collapse
Nope,but why rooting?
Xiaomi EU rom have the play store certified without root.
Im not worried about playstore, latest safetynet works fine with all banking and playstore.
Root for me cause of privacy, adaway is a big one, having zero ads on android is a game changer, plus being in full control via xposed is what attracts me to androids.
Evo400 said:
Im not worried about playstore, latest safetynet works fine with all banking and playstore.
Root for me cause of privacy, adaway is a big one, having zero ads on android is a game changer, plus being in full control via xposed is what attracts me to androids.
Click to expand...
Click to collapse
OK,I understand but try to see if the problem is solved before rooting.
I just reset the phone settings, try swapping cards into my 11T peo ( which works fine) cleared all data , cache and still dont have the dual sim option. What ever has happend as if the phone is a single sim only. And all settings, IMEI, etc only show single slot. The phone hasnt been updated either so its very strange event that lead to removal of the dual SIM.
Unless phone pushed some carrier settings update in the background, I dont know. I will flash again the same 13.0.36 fastboot and see if that helps and then go via twrp option.
Will update here
Update:
TWRP installed and I updated to latest 12 PRO version of 13.0.37
Everything went smooth, but DUAL SIM still not working. The phone is still listing one Sim 1 as if its a single sim phone?
Im speechless
Evo400 said:
Update:
TWRP installed and I updated to latest 12 PRO version of 13.0.37
Everything went smooth, but DUAL SIM still not working. The phone is still listing one Sim 1 as if its a single sim phone?
Im speechless
Click to expand...
Click to collapse
Trying to flash a stock rom without re-locking the bootloader.
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Update:
I did a complete wipe and reinstall of the Xiaomi EU rom and the Dual sim is back working now. Just pain trying to backup and restore, but all working now.
Quite possible a bug in the Xiaomi eu Rom.
Evo400 said:
Update:
I did a complete wipe and reinstall of the Xiaomi EU rom and the Dual sim is back working now. Just pain trying to backup and restore, but all working now.
Quite possible a bug in the Xiaomi eu Rom.
Click to expand...
Click to collapse
A bug that you will be the only one to have, moreover no one answered you on Xiaomi eu rom.
By formatting the data everything was cleaned and possibly recreated a partition.
Root +Magisk modules or xposed,etc.. may be the cause.