Hi Peoples,
I am getting bootloop after flashing China Dev, China Stable or Global ROM. My MI5's boot loader is already unlocked. So I don't need to flash via EDL mode. So far I am seeing below scenarios:
* Flash successful without edl mode - MI mi.com logo coming then suddenly restarting to the same state and again showing mi logo.
* Flash successful without edl mode - MI mi.com logo coming then ..... android logo coming then again looping the same thing. After couple of same loop then only mi logo looping!
I tried Mi Flash tool from fastboot ROM section, I tried another Flashtool from the en.miui forum and lastly I tried MiFlash Beta. But the same scenario.
I have also seen several times that, after flashing phone went to edl mode itself and could not be ON and none of the button combination works. Then I had to Flash again. However, still in boot loop. This is crazy!
Please help me out if you can!
Got the same problem - but i did not yet flashing any ROM, my xiaomi mi5 fall into boot loop after reboot (I did not changing any settings, or smth else).
Maybe someone can help in this situation? (my bootloader is locked)
Have you found any solution for this problem? I am experiencing the same issue when I tried to flash Chinese Rom to global rom in Mi5
Hello everyone, just get frustrated right now my brand new 5X Half-Bricked after trying to flash stock fastboot firmware of the A1 through EDL with mi flash. just over excited of this devices, as i'm not a new one on this stuff and things, so that i ignoring some post said that the mi A1 rom won't run/boot compatible with 5X. (some interesting post right here about 3 Variants Hacked Bootloader http://en.miui.com/thread-840402-1-1.html)
I put whole things needed togather (fastboot firmware of A1, and Mi5X, also Twrp and some of unbrick zip from the thread above) so i was thinking when everythings gone crazy and bad i just need to reverting back to stock fastboot firmware of MI5X and everything works fine.
i do backup my QCN file so the worst thing i losted the imei and baseband i just need to restore that backup. Then i start the stupid things with proud.
flashing the Mi A1 sucessfully without any error on mi-flash then power it on boom, as i predicted it won't be as easier and simple as that step. some error text appeared on my screen some related to bootloader things, okay i just go into fastboot and unlocking with type "fastboot oem unlock" done with success and thats also said in terminal. okay then i rebooted (no panic at all), so the warning text still, then appeared your system has been destroyed, okay than i put the mi A1 recovery and flashing that through the fastboot, its said error no such partitions "recovery"??? (bit panic here) but trying to type "fastboot boot tissot.img" (tissot the codename of A1) its boot and send me into recovery, flashing some A1 rom for 5X from xda still won't boot at all (start panic here ).
so everything i try here flashing stock miui also won;t even boot and see the homescreen. I give up and OK i just need to flash the stock 5X through EDL, rebooting to edl and then flashing the stock 5X and success flashing done without any error, so i rebooted but its only stuck at MI logo then restart itself (really PANIC), so i get into recovery (stock MIUI) and mybe wiping whole data and cache will help, but there's no changes still restart/rebooting itself , okay i need to flash again this time i downloding Develover versions, and put the devices into edl through test point this time (as now the bootloader are relocked after flashing the stock one).
after flasing done the device still won't even boot at all just stuck at MI logo, now i really need help anyone any advices will really help, thanks
SH1M4BD3 said:
Hello everyone, just get frustrated right now my brand new 5X Half-Bricked after trying to flash stock fastboot firmware of the A1 through EDL with mi flash. just over excited of this devices, as i'm not a new one on this stuff and things, so that i ignoring some post said that the mi A1 rom won't run/boot compatible with 5X. (some interesting post right here about 3 Variants Hacked Bootloader http://en.miui.com/thread-840402-1-1.html)
I put whole things needed togather (fastboot firmware of A1, and Mi5X, also Twrp and some of unbrick zip from the thread above) so i was thinking when everythings gone crazy and bad i just need to reverting back to stock fastboot firmware of MI5X and everything works fine.
i do backup my QCN file so the worst thing i losted the imei and baseband i just need to restore that backup. Then i start the stupid things with proud.
flashing the Mi A1 sucessfully without any error on mi-flash then power it on boom, as i predicted it won't be as easier and simple as that step. some error text appeared on my screen some related to bootloader things, okay i just go into fastboot and unlocking with type "fastboot oem unlock" done with success and thats also said in terminal. okay then i rebooted (no panic at all), so the warning text still, then appeared your system has been destroyed, okay than i put the mi A1 recovery and flashing that through the fastboot, its said error no such partitions "recovery"??? (bit panic here) but trying to type "fastboot boot tissot.img" (tissot the codename of A1) its boot and send me into recovery, flashing some A1 rom for 5X from xda still won't boot at all (start panic here ).
so everything i try here flashing stock miui also won;t even boot and see the homescreen. I give up and OK i just need to flash the stock 5X through EDL, rebooting to edl and then flashing the stock 5X and success flashing done without any error, so i rebooted but its only stuck at MI logo then restart itself (really PANIC), so i get into recovery (stock MIUI) and mybe wiping whole data and cache will help, but there's no changes still restart/rebooting itself , okay i need to flash again this time i downloding Develover versions, and put the devices into edl through test point this time (as now the bootloader are relocked after flashing the stock one).
after flasing done the device still won't even boot at all just stuck at MI logo, now i really need help anyone any advices will really help, thanks
Click to expand...
Click to collapse
I think you should not unlock the bootloader using the command fast boot OEM unlock,you should go to http://en.miui.com/unlock/ here and download the app to unlock it, and when you flash a new rom which is not miui,you must keep it unlock,do not fastboot OEM lock,that will cause it can not go into system and stuck in logo
linjike said:
I think you should not unlock the bootloader using the command fast boot OEM unlock,you should go to http://en.miui.com/unlock/ here and download the app to unlock it, and when you flash a new rom which is not miui,you must keep it unlock,do not fastboot OEM lock,that will cause it can not go into system and stuck in logo
Click to expand...
Click to collapse
Nope, that's the basic things and i really know how it works, As for now i''ve no ways to go / reach the homescreen at all, so i can't put my mi account in setting and linked the device into my acccount, its useless using the miunlock tools. And i can only do that commands right after i converted mine to A1 firmwares.
hi, finally, i know what problem you met, because i have met the same problem, the solution is ,you go to the fastboot ,first unlock the devices, then fastboot reboot,then you find you go to the system, then you go back to fastboot,and last ,you need to use the miflash to flash the rom,and it should work fine now,it seem when you are locked,the miflash can not really work
Last news, damn lucky bastard i'am got replaced units, lets see does we'll have some aosp goodies soon..
linjike said:
hi, finally, i know what problem you met, because i have met the same problem, the solution is ,you go to the fastboot ,first unlock the devices, then fastboot reboot,then you find you go to the system, then you go back to fastboot,and last ,you need to use the miflash to flash the rom,and it should work fine now,it seem when you are locked,the miflash can not really work
Click to expand...
Click to collapse
Hi, it happened to my mi note 3. But not able to unlock in fastboot or mi unlock tool (prompted me adb been blocked by other program) . It's good if you able to help me. Thanks in advance.
Sent from my Redmi Note 4 using Tapatalk
samgcw said:
Hi, it happened to my mi note 3. But not able to unlock in fastboot or mi unlock tool (prompted me adb been blocked by other program) . It's good if you able to help me. Thanks in advance.
Click to expand...
Click to collapse
Use the mi unlock tool ,you can only unlock the phone when you are in fastboot mode,,turn off the phone,press the power and volume down bottom simultaneously,and you will be in fastboot mode
I tried to flash Miui 9 on my Mi A2 with this install guide (https://forum.xda-developers.com/mi-a2/how-to/miui-10-install-guide-t3844729). But when i flashed Miui 9 MiFlash showed me it was succesful, but now I´m stuck at the MI Logo and cant go in fastboot mode. Also i think I can´t go in EDL-Mode because when i try to short the test points nothing happens. So neither MiFlash or Fastboot is recognizing my phone. What can I try?
some days ago i tried to convert mi a2 in 6x with your guide. After flash rom mi a2 show all time mi boot logo. now pc doesn't recognize fastboot mode, only edl mode but when i try to flash original stock rom or wayne rom i have this flash error
Phone is bricked, sell it on Ebay....or we can help u using dhl to USA at no cost.....
Hello. Did you manage to solve your problem?
I have the same situation.
Hello,
I was running unlocked bootloader and pixelexperience rom. Today I wanted to try to flash latest xiaomi.eu and now my phone is bricked.
Steps:
Twrp -
flashed data (after that i saw that i had an error and data didn't flash)
installed rom (because i didn't see the error) - rom failed to install
flashed data again from twrp advanced option
phone rebooted and now it bootloops on mi logo. i do not have recovery nor fastboot.
what can I do in this situation? i searched the forum but there is nothing similar
You must have fastboot, check how install miui using mi flash. I use this method and working for me
When I try to boot into fastboot, it only shows black screen. The PC does not recognise it.
Also, I do not have EDL mode available..
Andrei221 said:
When I try to boot into fastboot, it only shows black screen. The PC does not recognise it.
Also, I do not have EDL mode available..
Click to expand...
Click to collapse
Exact same issue, no fastboot or EDL mode. Tried updating the latest Miui 11 - Android 10 - Xiaomi EU Rom (Jan 25th) and the phone has been bricked.
Solution Deleted.
got into EDL mode using test points, but now i have edl auth error - "cannot receive hello packet"
Seems like a common problem for bricked devices and need mi account with the right edl auth privileges.
Any help welcome.
There is nothing to do, unless:
A) you find a Xiaomi Authorized account (in which case please alert us)
B) you manage to hack the EDL mode and bypass the Authorization.
Tertium non datur.
EDIT: EDL is the only chance for you anyway @Andrei221
If you had fastboot you could get into EDL by running: "fastboot oem edl", but since you have no fastboot you're only left with the test-points or an EDL-cable.
DoYouWantFriesWithThat said:
There is nothing to do, unless:
A) you find a Xiaomi Authorized account (in which case please alert us)
B) you manage to hack the EDL mode and bypass the Authorization.
Tertium non datur.
EDIT: EDL is the only chance for you anyway @Andrei221
If you had fastboot you could get into EDL by running: "fastboot oem edl", but since you have no fastboot you're only left with the test-points or an EDL-cable.
Click to expand...
Click to collapse
you know hoe to bypass EDL authorization?
Leoleo96 said:
you know hoe to bypass EDL authorization?
Click to expand...
Click to collapse
No. I've tried different things:
- trying to flash with QPST in EDL mode (9008)
- trying to flash fastboot roms with various/ancient versions of MiFlash in EDL mode (9008)
- flashing standalone modem firmwares (old ones, new ones, non-ARB ones, packed with NON-HLOS, etc.) from TWRP
- doing a MITM on the response that MiFlash & MiFlash PRO get from https://update.miui.com/updates/miotaV3.php
- doing a MITM on MiFlash and redirecting requests to old URLs (https://update.miui.com/updates/miotaV2.php, https://update.miui.com/updates/miota.php) and black-box testing them
- using MobileEdit Forensic tool to exploit the EDL firmware
*Note*: I've obviously tried all the different FireHose programmers that are floating around (including those distributed by MobileEdit).
Nothing works.
Especially trying to modify the response (if one understood its format) could very well be useless because it could be that the response from update.miui.com is validated directly by the firmware itself (like a challenge-response authentication) - this has to be verified.
The only possibility I see for now is to flash the original Xiaomi Recovery, let it connect to MiFlash Pro (choosing option n.3 from the menu), and then using IdaPro to trick MiFlash Pro into telling the Recovery to flash the phone. It shouldn't be hard, and I think it *MIGHT* offer the possibility to bypass ARB & Authentication (but I might be wrong: it might be equivalent to flashing from Fastboot). That waits to be tested.
I hope this saves y'all from wasting time.
To flash or unbrick Xiaomi Mi 8 Lite, you'll need edl authentication to use the Mi Flash tool to complete this flashing operation. An authorized Service Account is required. This is the worst part of flashing the latest generation of Xiaomi android devices. I have had this problem before with MI 8 Lite. I stuck getting these error messages "Mi Flash Tool Unauthorized for this Operation - Your Account is Unauthorized for this operation - Authorized Service Account required"
This method works only for Mi 8 Lite
In this blog post, you'll find your solution to unbrick your MI 8 Lite
Mi 8 Lite Bypass Account Authorized Official Flashing
Xiaomi Mi 8 Lite Firmware Flashing Without Authentification. edl mi 8 lite authentication.Xiaomi Mi 8 Lite (Platina) Firehose File [No Need Auth]...
learnandsharegsm.blogspot.com
In this youtube video tutorial, you'll find the easy way to unbrick Mi 8 Lite
tarkusy said:
To flash or unbrick Xiaomi Mi 8 Lite, you'll need edl authentication to use the Mi Flash tool to complete this flashing operation. An authorized Service Account is required. This is the worst part of flashing the latest generation of Xiaomi android devices. I have had this problem before with MI 8 Lite. I stuck getting these error messages "Mi Flash Tool Unauthorized for this Operation - Your Account is Unauthorized for this operation - Authorized Service Account required"
This method works only for Mi 8 Lite
In this blog post, you'll find your solution to unbrick your MI 8 Lite
Mi 8 Lite Bypass Account Authorized Official Flashing
Xiaomi Mi 8 Lite Firmware Flashing Without Authentification. edl mi 8 lite authentication.Xiaomi Mi 8 Lite (Platina) Firehose File [No Need Auth]...
learnandsharegsm.blogspot.com
In this youtube video tutorial, you'll find the easy way to unbrick Mi 8 Lite
Click to expand...
Click to collapse
Any suggestion to un-brick mi8 and not mi8Lite?
I don't understand how to bypass EDL Account only coping a file on images folder