Hi everyone: Great site. Hoping to learn how to keep my phone ticking for longer, total newbie, but happy to learn.
Welcome to XDA! Enjoy the forums and information!
Regards
Thank you. I Am now trying to search for a possible to a mistake I've made when installing a custom Os
I didn't install Gapps and forgot to go (Back to Install > gapps*.zip. Then tap Wipe cache/dalvik, swipe to confirm, then Reboot System) Can't boot twrp to recovery only goes to download. Struggling to find any past post related to this and new to the site so not finding where i should be looking. Galaxy s5 klte .
alnevex said:
Thank you. I Am now trying to search for a possible to a mistake I've made when installing a custom Os
I didn't install Gapps and forgot to go (Back to Install > gapps*.zip. Then tap Wipe cache/dalvik, swipe to confirm, then Reboot System) Can't boot twrp to recovery only goes to download. Struggling to find any past post related to this and new to the site so not finding where i should be looking. Galaxy s5 klte .
Click to expand...
Click to collapse
Hi, yes the Galaxy S5 sections and looks like you found them!
Related
Hi Guys,
Sorry for this stupid thread, m new to all this flashing stuff in Samsungs, just tried yday flashing ny GNote for the first time and right now using:
PARANOIDANDROID ROM
http://forum.xda-developers.com/showthread.php?t=1662802
Steps:
1. Copy Paranoid Android rom zip to sdcard
2. copy gapps zip to sd card
3. Hold Volume Up+Home+Power until Galaxy Note appears on screen and then release the buttons..
4. After this you should be in CWM Recovery.
5. Use Volume Up/Down to navigate and home button to select..
6. Go to Wipe Data/Factory Reset..
7. Then go to install update from sdcard
8. Navigate to Install zip from internal sdcard/sdcard (Depending on where u placed it)
9. Select ParanoidAndroid zip.
10. Repeat steps 7-9, but this time select gapps.zip
11. Go to advanced menu and wipe dalvik cache.
12. Go back and select Reboot now
and its awesome, just need some inputs from others who are using custom ROMs, what other best ROMs you have used, if possible share the thread link.
Thanks in advance.
sent from seXperia S
Pls. check the Thread Below, where a poll is going on for the same.
http://forum.xda-developers.com/showthread.php?t=1749123
Yin-Yang said:
Pls. check the Thread Below, where a poll is going on for the same.
http://forum.xda-developers.com/showthread.php?t=1749123
Click to expand...
Click to collapse
great, thanks!!
So I m using the best ROM PARANOIDANDROID, cool
sent from seXperia S
PA is OK, but the updates are so far behind the nightly updates or even cm9 official updates its frustrating. To be honest I'm running Anidroid v7 the guy has done wonders.
I do like the pa hybrid stuff , but most of the time being an old git I can't read the screen
Sent from a galaxy note far far away
Hello, since I don't really like my custom rom (remics 1.4) I would like to install back my stock rom (normally the latest gingerbread since I couldn't do any update). But on sammobile I can't find any roms for my country, I'm from belgium. My phone isn't simlocked, I don't know if it has any use to know that?
Btw, my phone is a galaxy s plus (GT-i9001)
Sorry for the double post
abdelbachir said:
Btw, my phone is a galaxy s plus (GT-i9001)
Sorry for the double post
Click to expand...
Click to collapse
Here is a collection of an official Samsung released Roms:
Tutorial how to flash them HERE.
Thanks man, that's really helpful. So I can flash any of those roms without worying about being belgian or anything?
Should i format my phone before flashing those roms?
From my experience you should do a wipe/factory reset before Odin the stock Rom.
I have Odin a stock Rom without wipe and it didn't boot so I cf-root, wipe from recovery and booted.
Sent from my GT-I9100 using xda app-developers app
Ok, so if I understand i should do : Wipe Data, Wipe Cache, Wipe Dalvik Cache and hop, I turn off my phone, go into download mode and flash the stock rom immediatly?
abdelbachir said:
Ok, so if I understand i should do : Wipe Data, Wipe Cache, Wipe Dalvik Cache and hop, I turn off my phone, go into download mode and flash the stock rom immediatly?
Click to expand...
Click to collapse
Exactly!:laugh:
Thanks man, you're a beast, really fast answer
sorry to bother you a bit more, but I prefer to be cautious with all of this, these roms, more precisely the XXKPU one (last in the list) is I think from poland? Does it have any importance? Since I am belgian, i need the french language haha
Oi, guys, I really need help please!! I did wipe data/factory reset in clockworkmod, then i closed my phone and flashed the stock rom (XXKPU) with Odin. But now my phone isn't booting! Or more precisely, It's just the sequence with the "S" appearing that comes over and over again!! What did I do wrong and what can I do please??
abdelbachir said:
Oi, guys, I really need help please!! I did wipe data/factory reset in clockworkmod, then i closed my phone and flashed the stock rom (XXKPU) with Odin. But now my phone isn't booting! Or more precisely, It's just the sequence with the "S" appearing that comes over and over again!! What did I do wrong and what can I do please??
Click to expand...
Click to collapse
Boot into cwm and either wipe data again or your are going to have to flash the stock again. I have had to do that in the past
Sent From My YP-G1 running ICS build 3.5
I tried booting in cwm but I can't, failed like 5 times. A few tries, I got an android robot with some sort of opened box next to him.
abdelbachir said:
I tried booting in cwm but I can't, failed like 5 times. A few tries, I got an android robot with some sort of opened box next to him.
Click to expand...
Click to collapse
This is your WIKI http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001 it contains everything you need to help you, get a better understanding of your phone
1) 19001 uses Odin 4.43
2) need AriesVe.ops file for flashing
3) IF CWM failed flash CWM 6.0
4) If boot failed flash a i9001 boot loader ( look in My Android collections , link below or use your WIKI)
Thanks a lot man, flashed the cwm in the phone, did a wipe data/factory reset and it works like a charm now. I'll defenitly do a bit of reading to understand my phone a looot better!
im new to this forum so im not sure if i'm at the right place so i will just ask
today i placed a custom rom on my phone read everything and did everything as said because it was the first time, but when i was done the samsung logo came and turned blue.
so i dont know what that means but here is some info
i rooted the phone
then installed clockwork
and then installed cyanogenmod 10.1
and gapps
i hope this is enough infomation for you guys and that you can help me
many thanks happy snappy
androidarmv6
Hello!
Try to repeat the process but using official androidarmv6 ROM for cooper (S5830):
http://forum.xda-developers.com/showthread.php?t=2199575
Don't forget to wipe factory/data.
Good luck.
happy snappy said:
im new to this forum so im not sure if i'm at the right place so i will just ask
today i placed a custom rom on my phone read everything and did everything as said because it was the first time, but when i was done the samsung logo came and turned blue.
so i dont know what that means but here is some info
i rooted the phone
then installed clockwork
and then installed cyanogenmod 10.1
and gapps
i hope this is enough infomation for you guys and that you can help me
many thanks happy snappy
Click to expand...
Click to collapse
piobikt faireft
shyaoran.spam said:
Hello!
Try to repeat the process but using official androidarmv6 ROM for cooper (S5830):
http://forum.xda-developers.com/showthread.php?t=2199575
Don't forget to wipe factory/data.
Good luck.
Click to expand...
Click to collapse
thank you for helping me but i need some more explaination because this is the second time and the first time i had some help but i forgot about all that so if you could explain it i would be very grateful
p.s. flashing is not my strongest point if you understand
ok here it goes-
1-open cwm recovery
2-select factory data reset/wipe
3-select install update from sd card , choose zip from sd card n select ur respective rom flash it!
4-then select wipe cache partition
5-select advanced - wipe dalvik cache.
6- reboot system now n u r done
plss hit thanx if helped.
Format /system too if u r flashing any custom rom over the samsung stock rom for the first time...remember this tip forever
Sent Via XDA™ Premium
To format all, go to CMW,
1- Mounts and storage
2- Format cache/data/system
I hope that i Help you.
Thanks
Thanks for the explanation you guys i Will do it tommorrow you Will hear it If it works or not
bad news
well i did all three but it didnt work the samsung logo now turns red and dissapears and when i tried to install rom
but guys i think i screwed it up because somehw i lst my backup and i can only go to recovery mode and download mode
and i think the usb is not on debugging mode and is it still possible to fix the phone even if i can only use recovery mode
I was attempting to install the SlimKat ROM, and I followed the directions by going into CWM and doing a factory reset, wiping the cache, and formatting /system. When I tried to install the ROM, though, it told me that the file was bad. Now I can't boot back into the OS! It just stops at the T-Mobile splash screen. I can still get to CWM, but I have no idea where to go from there. I tried to recover from a previous backup, but it gives me "Error while restoring /system!"
How can I get my recoveries to work?
Just to confirm:
You do have the model Exhibit T679, correct?
What version of CWM did you flash?
The way I've been flashing ROMs:
Boot into CWM
Go to mounts and storage
format /system
format /cache
format /data
Go back to first CWM screen
Go to advanced
wipe dalvik cache
Go back to first CWM screen
Choose install zip
choose zip from the location you placed the ROM
To restore your backup:
Do steps 1-5 from above
6. Go to backup and restore
7. restore from the location you saved the backup
ZHXS said:
Just to confirm:
You do have the model Exhibit T679, correct?
What version of CWM did you flash?
Click to expand...
Click to collapse
Yes, it is a T679. My version of CWM is 6.0.5.0.
So, I solved the original problem, and now I have a new one... What I found was that I was able to install one of the other ROMs (Mahdi) from my external SD card. Then, I took a look at the SlimKat zip on my computer. As I suspected, the file was corrupted. (The MD5 hash didn't match.) So, I downloaded a new copy, verified the hash, and then tried again. This time, it worked! Everything seems to have installed okay, and I am loving SlimKat so far. Except for one thing... Somehow, I unrooted my device! Titanium Backup doesn't work anymore, and it was telling me it couldn't get root. So I installed Root Checker, and sure enough, I don't have root anymore! I downloaded root-stock.zip and tried flashing it, and that didn't work. Well, I guess it wouldn't, since I don't have a stock ROM anymore?
I'm sure I could flash a stock ROM, and then root that, but then I would want to go back to SlimKat, and I'm afraid I'd just wind up un-rooting it again.
fajrero said:
Everything seems to have installed okay, and I am loving SlimKat so far. Except for one thing... Somehow, I unrooted my device! Titanium Backup doesn't work anymore, and it was telling me it couldn't get root. So I installed Root Checker, and sure enough, I don't have root anymore! I downloaded root-stock.zip and tried flashing it, and that didn't work. Well, I guess it wouldn't, since I don't have a stock ROM anymore?
I'm sure I could flash a stock ROM, and then root that, but then I would want to go back to SlimKat, and I'm afraid I'd just wind up un-rooting it again.
Click to expand...
Click to collapse
As far as I know, most of these custom ROMs already come with root.
If you installed [ROM] [UNOFFICIAL] [4.4.2] SlimKat ROM [WEEK… | Galaxy Exhibit 4G | XDA Forums one of the listed problems is:
...Awesome... said:
What's Not Working!!
2) Some reason i lost root i had to include the Su app and Root is now active again
Click to expand...
Click to collapse
Maybe wait? Or try to flash/install Su?
---------- Post added at 12:12 AM ---------- Previous post was at 12:07 AM ----------
Of if you installed [ROM][KK][4.4.4][KTU84P] SlimKat 6 UNOFFICIA… | Galaxy Exhibit 4G | XDA Forums known issue is:
jfbs said:
Known Issues
Do not enable KSM
If lacking root, enter superuser settings, then tap superuser access and select apps and adb.
Click to expand...
Click to collapse
ZHXS said:
As far as I know, most of these custom ROMs already come with root.
Click to expand...
Click to collapse
That's what I thought, too. This is why it's so confusing for me.
If you installed [ROM] [UNOFFICIAL] [4.4.2] SlimKat ROM [WEEK… | Galaxy Exhibit 4G | XDA Forums one of the listed problems is:
Click to expand...
Click to collapse
No, it's the one a little further down:
[ROM][KK][4.4.4][KTU84P] SlimKat 6 UNOFFICIAL-20140707
Maybe wait? Or try to flash/install Su?
Click to expand...
Click to collapse
That's what I'm going to try next. I haven't been able to find a source for the su binary yet, though. Just a lot of stuff for SuperSu, which requires you to already be rooted. I'm gonna try to get some sleep and look some more tomorrow. Thanks for your help.
fajrero said:
No, it's the one a little further down:
[ROM][KK][4.4.4][KTU84P] SlimKat 6 UNOFFICIAL-20140707
That's what I'm going to try next. I haven't been able to find a source for the su binary yet, though. Just a lot of stuff for SuperSu, which requires you to already be rooted. I'm gonna try to get some sleep and look some more tomorrow. Thanks for your help.
Click to expand...
Click to collapse
Ok, that ROM seems to have Superuser built in already, do you see a menu item for it when you go into Settings? The instructions seem to note that you have to go into Superuser and check a couple boxes.
Maybe it was a bad install, try formatting the necessary partitions and reflash again. Then go into Superuser and select the appropriate options.
Sometimes I also format sdcard0 after all the other formatting just to be extra thorough then install new ROM per instructions:
jfbs said:
Installation
Install at your own risk
- First time flashing CM11 to your Galaxy Exhibit (or coming from another ROM)?
Boot into existing recovery and create a Nandroid Backup!
Install at least ClockworkMod Recovery 6.0.4.5 or TWRP 2.6.3.0
Reboot recovery into at least ClockworkMod Recovery 6.0.4.5 or TWRP 2.6.3.0
CWM: WIPE dalvik-cache, format: data, system, and cache. TWRP: WIPE dalvik-cache, data, system, and cache.
** Optionally back-up sdcard0 before install and format it in recovery if experiencing install issues **
Install the ROM (without gapps)
Reboot system
After system boots, boot back into recovery and install KK Google Apps.
Wipe dalvik-cache and cache. Reboot.
Click to expand...
Click to collapse
TripFX said:
FYI most people here on xda just prefer you either clicking the thanks button if you the post was useful or if it a bug related then logcats and brief description of the problem and wait patiently for someone who knows to either A) if dev - fixes it or asks for more info. B) if other user- tries to help you out if possible.
Click to expand...
Click to collapse
:laugh:
You are welcome!
ZHXS said:
Maybe it was a bad install, try formatting the necessary partitions and reflash again. Then go into Superuser and select the appropriate options.
Click to expand...
Click to collapse
Yeah, that seems to have done it. I have root again, and everything looks okay.
Thanks again!!
Hi there,
I want to give my S2 away as a present to a family member. So I downloaded the latest version (T813XXS2BRF2_T813XAR2BRF2_XAR) and flashed it with Odin. Everything got an OK and PASS, but when I start it up it gets to the Samsung logo and that's it.
Any ideas?
Thanks
MJH
Hi,
I recommand you to install last TWRP recovery 3.3.0-0 and follow "How to return to full stock" in my thread : Thread
If you never used Samsung Find My Mobile you are fine (If you used it need to remove all settings in it). Hope it will help.
Cheers.
Svan987 said:
Hi,
I recommand you to install last TWRP recovery 3.3.0-0 and follow "How to return to full stock" in my thread : Thread
If you never used Samsung Find My Mobile you are fine (If you used it need to remove all settings in it). Hope it will help.
Cheers.
Click to expand...
Click to collapse
I'll give it a try. Thanks!
Edit: Your TWRP 3.3.0 link doesn't show a T813 version. What version do you want me to use?
I had a similar issue after you flash the stock ROM and it hangs, turn it off and boot back into recovery, most likely it will be stock. From there do a wipe/reset and reboot & let it sit for a while, hopefully, it will bring up the startup screen.
thompsd said:
I had a similar issue after you flash the stock ROM and it hangs, turn it off and boot back into recovery, most likely it will be stock. From there do a wipe/reset and reboot & let it sit for a while, hopefully, it will bring up the startup screen.
Click to expand...
Click to collapse
I just get a blue screen with Error on it, like there is nothing installed.
I just try to reflash or reflash TWRP and install a costume ROM again.
Svan987 said:
Hi,
I recommand you to install last TWRP recovery 3.3.0-0 and follow "How to return to full stock" in my thread : Thread
If you never used Samsung Find My Mobile you are fine (If you used it need to remove all settings in it). Hope it will help.
Cheers.
Click to expand...
Click to collapse
It worked, thanks! I flashed TWRP 3.3.0 and flashed your v7 light version.