P9 Plus Bricked ? - Huawei P9 Plus Questions & Answers

Hello everyone,
I have this P9 Plus laying around that I wanted to use as a backup phone in case my main dies suddenly but when I turned it on, I was faced with a ton of unprecended events.
It was unlocked and a custom rom was flashed a couple of years back. But now when I turnt it on, I'm facing these messages:
1 - After this message, the screen freezes
Your device has been unlocked and can't be trusted
To learn more visit [website]
Your device is now booting
Click to expand...
Click to collapse
2 - After this message, it boots into eRecovery
Press power key to continue
Press voulme up key up to 3 seconds to enter erecovery to restore your device
Your device will continue to boot 5 seconds later if there is no operation
Click to expand...
Click to collapse
It then connects to the Wifi and greets me with
Getting package info failed
Click to expand...
Click to collapse
3 - When completely shutdown, I press down on the Vol down key and plug it into the comptuer, triggers Fastboot with this on screen
AP_S_COLDBOOT
NA
volumnkey_down_press_process_func
PHONE Unlocked
FRP Unlocked
Click to expand...
Click to collapse
I can flash TWRP recovery (twrp-3.7.0_9-0-vienna.img) but it doesn't want to boot on it after I flash it, it goes back to message #1.
I really cannot wrap my head around this. I really don't know where could be the problem from ? What's preventing everything to compute correctly ? If you have any leads on this I'd be more than happy to try them !
Thanks a lot y'all !
Cheers !

Related

Can't enter recovery mode after installing TWRP

Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
Are you on EMUI 5 (Android Nougat) ? If so, official TWRP is not compatible with version > EMUI 4.x for now.
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
ClementNerma said:
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
Click to expand...
Click to collapse
you need install original recovery and extract update.app from B100 firmware, then you place it to "dload" folder in your sd card and flash using 3 buttons. you cant full brick by messing with root. only soft brick which is fixable.
Ok I'll try it. I will post again if something comes wrong.
Thanks a lot for your help
I forgot to ask about one thing : I'm owning a phone with NEM-L51 model and I don't know if I can use NEM-L22 firmware ? If I can't, where can I find the right files to downgrade this specific model ? All the firmware files I see on the web are for the NEM-L22...
EDIT : I've found the B102 firmware for NEM-L51 model (Europe + UK) can I take it for the downgrade or is the B100 specific version needed ?
ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
gopinaidu77 said:
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
Click to expand...
Click to collapse
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears. This is really strange, when I see videos I find on YouTube all Honor 5C owners that just do what you say enter in recovery mode, but it's not my case... I really wonder why.
I don't know if that can help you to understand, but I'm using a french Honor 5C phone, with EMUI 5.0 / Android Nougat like I said previously, model is NEM-L51 and I did the Android Nougat update several days ago using the Honor's official update application, which is natively installed on the phone.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
ClementNerma said:
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
Click to expand...
Click to collapse
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
gopinaidu77 said:
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
Click to expand...
Click to collapse
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video of when I boot my phone in normal mode / recovery mode / erecovery mode ?
ClementNerma said:
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video ?
Click to expand...
Click to collapse
No i understood
gopinaidu77 said:
No i understood
Click to expand...
Click to collapse
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
EDIT : I forgot to precise the long model name of my phone : NEM-L51C432B350. On Firmware Finder Rewrite it shows that there are only two update packages for it, published on 20.04.2017... So I wonder if I need to download the three files shown in the filelist of the big update (1.68 Gb) and install them on the device ?
ClementNerma said:
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
Click to expand...
Click to collapse
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
gopinaidu77 said:
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
Click to expand...
Click to collapse
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
ClementNerma said:
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
Click to expand...
Click to collapse
Yes that's fine.
gopinaidu77 said:
Yes that's fine.
Click to expand...
Click to collapse
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
ClementNerma said:
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
Click to expand...
Click to collapse
Long click of power button will shut down the phone. Why u always refer about usb cable . Follow all instructions unplugged
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
gopinaidu77 said:
Long click of power button will shut down the phone.
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
Click to expand...
Click to collapse
Nope, long click of power button will just reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
ClementNerma said:
Nope, long click of power button will hust reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
Click to expand...
Click to collapse
Yes , the same happend for me ! U can unbrick bro
gopinaidu77 said:
Yes , the same happend for me ! U can unbrick bro
Click to expand...
Click to collapse
But how can I unbrick the phone ? I can't enter in any mode, I can't connect it to PC, I can't shutdown the phone, I can't use ADB or FastBoot on it, I can't reflash the bootloader or install a TWRP, downgrade or boot normally, I can't do anything !
So how could I unbrick it ? For now it's just still displaying "Your device is booting now..."
If you know how to do, please tell me so I can unbrick my phone. Sorry for asking you so many things I don't understand myself why there are so many problems...

Boot Loop after Flashing Fire Tab to Nexus ROM

i installed the rom with the guide in the youtube video for NEXUS ROM on Fire Tab 7.
Yesterday it works, but today after reboot it is stuck in boot loop! only see the amazone logo again and again.
Power + Volume Down doesnt work always boot loop
DeMichaelis said:
i installed the rom with the guide in the youtube video for NEXUS ROM on Fire Tab 7.
Yesterday it works, but today after reboot it is stuck in boot loop! only see the amazone logo again and again.
Power + Volume Down doesnt work always boot loop
Click to expand...
Click to collapse
- disconnect from power source
- long press power button until device shuts off (and stays off)
- press and hold outside volume button (closest to edge)
- then press and hold power button
- observe behavior
If device still boot loops there is little (no) chance for recovery. You can try the above procedure using the inside volume button (boots into fastboot) but that won't get you anywhere unless the version of FireOS previously installed was 5.0.1 or lower.
Davey126 said:
- disconnect from power source
- long press power button until device shuts off (and stays off)
- press and hold outside volume button (closest to edge)
- then press and hold power button
- observe behavior
If device still boot loops there is little (no) chance for recovery. You can try the above procedure using the inside volume button (boots into fastboot) but that won't get you anywhere unless the version of FireOS previously installed was 5.0.1 or lower.
Click to expand...
Click to collapse
i tried both volume button , but no change
now its broken or... ???
DeMichaelis said:
i tried both volume button , but no change
now its broken or... ???
Click to expand...
Click to collapse
Unfortunately, nothing can be done if device can not enter recovery mode. Toss or sell it for parts.
Davey126 said:
Unfortunately, nothing can be done if device can not enter recovery mode. Toss or sell it for parts.
Click to expand...
Click to collapse
OMG !! :crying: i bought it yesterday at Amazon
any chance of waranty at amazon.com ?
DeMichaelis said:
OMG !! :crying: i bought it yesterday at Amazon
any chance of waranty at amazon.com ?
Click to expand...
Click to collapse
Amazon has a 30 day return and 90 day 'no questions asked' warranty policy. Be aware the replacement (if you choose that path) will likely arrive with a version of FireOS that can not be rooted or accommodate a custom ROM. Be sure to ask when replacement arrives so you don't end up with another brick.
Davey126 said:
Amazon has a 30 day return and 90 day 'no questions asked' warranty policy. Be aware the replacement (if you choose that path) will likely arrive with a version of FireOS that can not be rooted or accommodate a custom ROM. Be sure to ask when replacement arrives so you don't end up with another brick.
Click to expand...
Click to collapse
ok thank you.
any idea why it works yesterday but no longer after a restart.??
i updated superSU and installed some apps like facebook, chrome, usw.
DeMichaelis said:
ok thank you.
any idea why it works yesterday but no longer after a restart.??
i updated superSU and installed some apps like facebook, chrome, usw.
Click to expand...
Click to collapse
Recent SuperSU builds have been problematic on Lollipop but that type of failure usually manifests during ROM boot and does not disable recovery (your bootloop appeared to occur during device initilization). Could have been a hardware failure; these pups don't have the most robust components or build quality.
Davey126 said:
Recent SuperSU builds have been problematic on Lollipop but that type of failure usually manifests during ROM boot and does not disable recovery (your bootloop appeared to occur during device initilization). Could have been a hardware failure; these pups don't have the most robust components or build quality.
Click to expand...
Click to collapse
Weird things happen!
I'm now writing from my Amazon tab. ?
I plugged it in at home in power plug an not USB from Notebook.
Now it boots normally. Crazy.
DeMichaelis said:
Weird things happen!
I'm now writing from my Amazon tab. ?
I plugged it in at home in power plug an not USB from Notebook.
Now it boots normally. Crazy.
Click to expand...
Click to collapse
Well yes. That was the first instruction in my original response. Be mindful of details.

I need help guys !!

Hello
am using huawei p9 plus right now my phone only does is boot to the page it says "Your device has been unlocked and can't be trusted" and got 3 options press power key to continue press volume up to 3 seconds to enter erecovery to restore you device and do nothign for 5 sec to boot alone. no rom no TWRP i tried using DC Pheonix but still getting errors any suggestions ?
Thank you (VIE-L29C181)
Dandachi said:
Hello
am using huawei p9 plus right now my phone only does is boot to the page it says "Your device has been unlocked and can't be trusted" and got 3 options press power key to continue press volume up to 3 seconds to enter erecovery to restore you device and do nothign for 5 sec to boot alone. no rom no TWRP i tried using DC Pheonix but still getting errors any suggestions ?
Thank you (VIE-L29C181)
Click to expand...
Click to collapse
I think you can use Hisuite
CNHowardLai said:
I think you can use Hisuite
Click to expand...
Click to collapse
no i can't tried it already

Brick/Bootloop Huawei P8 Lite 2017

Hello everyone, I saw a few posts on this forum about other bricked phones, but my case is different (if its not then please link me the thread, Thanks).
Story: Today I decided that my unrooted phone wasn't enough for me, so I said: "Why not root?" . I have to add that I owned a LG Magna 3G before this Huawei P8 LIte 2017 and oh boi was the rooting procedure WAY HARDER(the huawei procedure)... I did well with my LG, but not so well with my Huawei. To be honest I was almost done but because I couldnt boot into TWRP, I decided to follow a guide I cant find cause I followed so many that my History is a mess (if anyone requests I will do some digging though). The guy suggested to someone that couldnt boot into TWRP (like me) that he should falsh TWRP>relock his OEM>Shutdown>Press a combination to go into recovery mode>???>Profit. I did just that but my device is now a 180 Euro brick.
Probelm: My device bootloops. Every time I shut it down (hold power key for 10sec), it reboots and gets stuck on the famous "Your device has been locked and can't be trusted. To learn more, BLAH BLAH BLAH. Your device is booting now...
I tried several key combinations, but whatever I do, when I hold my power key for 10sec, The huawei logo pops up for a second or two and then I get stuck on this screen again...
Sadly, I seem to have no connection between my PC and my device (adb can't find any connected device).
I also want to add that, after I was promted to relock my OEM, I removed the USB cable whoopsie.
What Im looking for:
A way to regain contact between my PC (adb) and my phone
A way to shutdown my device for now (and not forever... just for the night)
Someone to tell me that he had the same issue and took the following steps (Need clear answers and steps)
Anything else whatsoever
I don't think it's necessary to provide the files I used, since the reason my device is like this is because of my own stupidity:silly:
Thank you for your time.
You have to hold Power and Volume Up button pressed to boot into erecovery, not only power, check it.
grgzz said:
You have to hold Power and Volume Up button pressed to boot into erecovery, not only power, check it.
Click to expand...
Click to collapse
Sorry for replying after 2 hours, I didn't get a notification.
I tried:
1. Holding the buttons until I see the "your device is booting..." message
2.Holding the buttons until it vibrates
3.Holding the buttons until I see the Huawei logo
Thanks for your time anyway
You press Volume Up + Power simultaneously, when you see the Huawei logo you release Power and hold Volume Up only until it boots to erecovery.
grgzz said:
You press Volume Up + Power simultaneously, when you see the Huawei logo you release Power and hold Volume Up only until it boots to erecovery.
Click to expand...
Click to collapse
Tried this several times, no result.
Is there a more drastic solution to my stubborn phone?
Aneom7331 said:
Tried this several times, no result.
Is there a more drastic solution to my stubborn phone?
Click to expand...
Click to collapse
The most drastic solution is the DC Phoenix software, not for free, if i am right they ask 15€ for 72 hours.
Not going to bother with this one tho... if I am very desperate, I might try to "borrow" it, but Im gonna seek other solutions until then.
Thanks for your time
On the "your device has been unlocked" hold the Volume up button until you boot to eRecovery. From there connect to wifi and restore stock rom. Afaik, erecovery should boot on bootlooped device. Give it a try
If this doesnt work, plug in to pc, and hold volume up + power, on huawei logo leave power button and hold volume up until you get to erecovery
aciupapa said:
On the "your device has been unlocked" hold the Volume up button until you boot to eRecovery. From there connect to wifi and restore stock rom. Afaik, erecovery should boot on bootlooped device. Give it a try
If this doesnt work, plug in to pc, and hold volume up + power, on huawei logo leave power button and hold volume up until you get to erecovery
Click to expand...
Click to collapse
Hello, thanks for replying
My device is now good, only gapps are missing but I don't care too much. Here is what happened:
So, I left my phone unplugged from any power source during the night (meanwhile the screen couldn't turn off), although I swear I did this 20 times already, when I booted my device after I came back from my University, my phone booted into eRecovery... I downloaded the latest package and it seems to work just fine now, the only problem is that the gapps need to be flased via TWRP (that I don't think I have anymore, how ironic).
Thanks to all of you who cared about giving me a solution :victory: Have a fantastic day
If you want to have a complete working system, i suggest you to try to update using erecovery again. It should download full firmware with gapps etc
Aneom7331 said:
Hello, thanks for replying
My device is now good, only gapps are missing but I don't care too much. Here is what happened:
So, I left my phone unplugged from any power source during the night (meanwhile the screen couldn't turn off), although I swear I did this 20 times already, when I booted my device after I came back from my University, my phone booted into eRecovery... I downloaded the latest package and it seems to work just fine now, the only problem is that the gapps need to be flased via TWRP (that I don't think I have anymore, how ironic).
Thanks to all of you who cared about giving me a solution :victory: Have a fantastic day
Click to expand...
Click to collapse
aciupapa said:
If you want to have a complete working system, i suggest you to try to update using erecovery again. It should download full firmware with gapps etc
Click to expand...
Click to collapse
Well, that was what we told you to do at first time. Erecovery can bring it back to life easily. Now as you have already been told erecovery flashes the complete firmware, including gapps.
You can also try to update it through the settings menu, in the system update settings you press the three dots menu on the upper right corner and select download latest complete package.
grgzz said:
Well, that was what we told you to do at first time. Erecovery can bring it back to life easily. Now as you have already been told erecovery flashes the complete firmware, including gapps.
You can also try to update it through the settings menu, in the system update settings you press the three dots menu on the upper right corner and select download latest complete package.
Click to expand...
Click to collapse
I know you told me first but, the difference was that, my phone had to ran out of battery to do this. In the end of my last reply I said thanks to all of you who cared, including you, you cared the most actualy
Aneom7331 said:
I know you told me first but, the difference was that, my phone had to ran out of battery to do this. In the end of my last reply I said thanks to all of you who cared, including you, you cared the most actualy
Click to expand...
Click to collapse
Well, at least it works now.

''this divice has been unlocked and cant be trusted'' how to get rid of it ?

so every time i turn off and on , i get this message telling about my unlocked bootloader. (phone is rooted)
What should i do to make the phone turn on and off without showing this message ?
Your device has been unlocked and
can't be trusted.
To learnmore, visit:
..........
..................
(1) Press Power key to continue.
(2)Press Volume Up key up to 3 seconds to
enter erecovery to restore your device.
(3)Your device will continue to boot 5
seconds later if there is no operation.
thank you to all
The-Cronos said:
so every time i turn off and on , i get this message telling about my unlocked bootloader. (phone is rooted)
What should i do to make the phone turn on and off without showing this message ?
Your device has been unlocked and
can't be trusted.
To learnmore, visit:
..........
..................
(1) Press Power key to continue.
(2)Press Volume Up key up to 3 seconds to
enter erecovery to restore your device.
(3)Your device will continue to boot 5
seconds later if there is no operation.
thank you to all
Click to expand...
Click to collapse
You can't remove it, as long as the bootloader will be open, that message will stay.
Pretoriano80 said:
You can't remove it, as long as the bootloader will be open, that message will stay.
Click to expand...
Click to collapse
thank you mate, i thought it was only me having it

Categories

Resources