Related
HI! I flashed by P9 AL00 with stock Rom. It was running on fRomFuture NewWorld 4.1. First I unrooted my phone. Flashed it with stock rom by SRK Tool. Put the update file in dload folder of the sdcard. Switched the phone off. Pressed all 3 buttons together. It started uploading. Once it got completed, it never turned on. I have tried all the ways to turn it on. Pressed Power button fore more than 30 mins, pressed Vol Up + Power, Vol Down + Power, All 3 buttons together, but nothing helped. Its just not switching on. Please Help.
Maybe it's not charged.
UPDATE:
adb is not recognising the device while fastboot does. This is my only hope now. Can I somehow retrieve my phone back by fastboot?
usmaggu said:
UPDATE:
adb is not recognising the device while fastboot does. This is my only hope now. Can I somehow retrieve my phone back by fastboot?
Click to expand...
Click to collapse
HiSuite cant halp you ? there is recovery option in it, try that first!
Tried it, it says "Your device is not supported for system recovery." In supporting devices it's showing only EVA-L09 and EVA-L019, whereas mine is EVA-L00
Arnys said:
HiSuite cant halp you ? there is recovery option in it, try that first!
Click to expand...
Click to collapse
Tried it, it says "Your device is not supported for system recovery." In supporting devices it's showing only EVA-L09 and EVA-L019, whereas mine is EVA-L00
maybe in this post can find solution http://forum.xda-developers.com/p9/how-to/hard-brick-l-19-t3507768
Hello,
i unlocked my Bootloader and flashed twrp using adb,
but when i now try to enter twrp i get to the screen:
Your device has been unlocked and
can't be trusted.
To learn more,visit:
a useless link blabla
Your device is booting now....
Click to expand...
Click to collapse
and there i get stuck because is does not boot ,
i waited for 10min but nothing happend.
I can still boot the phone normally by entering the fastboot mode and rebooting it from there, but i can't use twrp to install cm13 .
I tried this https://forum.xda-developers.com/p9/how-to/trouble-entering-twrp-t3541212 but it did not work.
Just press volume down and power button to enter fast boot, then flash stock recovery, reboot , afterwards try unlock bootloader and try twrp recovery again, for ease use srk tool 2.0
I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer
And what version works with Nougat?
henryco11 said:
And what version works with Nougat?
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
sadly you're not able to flash anything except some special supersu version, because of some reasons (the missing decryption support i guess?).
SCRAFI said:
I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer
Click to expand...
Click to collapse
and how you solved pleaseeeee
mendja said:
and how you solved pleaseeeee
Click to expand...
Click to collapse
The answer to your question is in the post that you quoted... lol. Try reading it again.
a read again.
but I can not come to the bootloader or fastboot. nothing whatever to press the volume up or down with the power or just repeats
your device has bean unlocked
cant trust
visit ....ballal
your device booting now
So if you have an idea that with these images on the display get into fastboot or something else. help you. thank you
mendja said:
a read again.
but I can not come to the bootloader or fastboot. nothing whatever to press the volume up or down with the power or just repeats
your device has bean unlocked
cant trust
visit ....ballal
your device booting now
So if you have an idea that with these images on the display get into fastboot or something else. help you. thank you
Click to expand...
Click to collapse
same here. did you find a solution?
Unable to boot in TWRP 3.1.0-0, hanging at "Your device is booting now......"
eelc said:
same here. did you find a solution?
Click to expand...
Click to collapse
Has anyone found a solution to this yet?
Regards
First think whats your device.
Some of you here flashing different recovery or are in different device forum.
salineBoy said:
Has anyone found a solution to this yet?
Regards
Click to expand...
Click to collapse
hey, i have.
dkionline said:
First think whats your device.
Some of you here flashing different recovery or are in different device forum.
Click to expand...
Click to collapse
Found a way around the problem: I downloaded Magisk, used that to unroot. Enter recovery via Rom Manager. Trying to boot to recovery using volume + and power button only work 10 - 15% of the time.
am on PRA-LX1C432b106, dual sim edition i've unlocked the boot loader and receive your device is unlocked and cannot be trusted . to learn more visit... your device is booting now, but he do not boot. After a complete drain of the battery with the charger plugged in i can boot in software. but i do not have a keyboard option and any google play store account. cannot format wipe because miss of the keyboard . the question it is OK to install VNS-L31 software firmware on my device? And what version to put ?
i want apply themes but not working .. i know it problem is hw init is missing . so i unzip speacseas c636 for update.app and flash dload method .. but it goes to bootloop .. i flash mm stock update.app also not working .. try flash rollback package .. bootloop and cant enter recovery and erecovery.. my fastboot is frp lock and phone locked .. i see at screen " connect hisuite " at last try it uncompatible .. so what i could do for saving my phone life ?
salineBoy said:
Found a way around the problem: I downloaded Magisk, used that to unroot. Enter recovery via Rom Manager. Trying to boot to recovery using volume + and power button only work 10 - 15% of the time.
Click to expand...
Click to collapse
Button combo works everytime if u do it right.
Hold both keys until the Huawei Logo dissappear and it will work.
SCRAFI said:
I just solved the problem, somehow i was using the wrong TWRP version because my P9 is running nougat but thank you for the answer
Click to expand...
Click to collapse
can you lead me into the version of the twrp you used ? i have nougat too and installed the latest twrp there with no luck
you used orginal recovery from twrp. me? rom manager download this recovery. Unlock bootloader again. Flash b136 from twrp 3.0.2.0 after flas b136 with dload folder after b182 and b210 after unlock bootloader again and update to nougat.
Wysłane z mojego EVA-L09 przy użyciu Tapatalka
I unlocked bootloader, installed twrp using fastboot and then as you enter reboot command, you need to hold volume up and power button and hold down to avoid going to standard recovery. It took several attempts to do it (re-installing twrp every time), but worked on C432383 which is Nougat
Well it looks like you actually have to hold power + volume up when the phone is off and release all keys 0.5-1 seconds after the screen lights up with Huawei logo / text to boot into the custom recovery or else it will just boot Huawei eRecovery...
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
Are you on EMUI 5 (Android Nougat) ? If so, official TWRP is not compatible with version > EMUI 4.x for now.
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
ClementNerma said:
I'm using EMUI 5.0 / Android 7.0.
So now I've installed an incompatible TWRP can I just downgrade to EMUI 4.0 / Android 5.0 then flash it again and root my phone or should I reflash the original recovery before doing that ? I've read somewhere that updating a rooted phone could brick it so even if mine has just a TWRP and want to downgrade instead of upgrading I prefer to be sure.
Thanks by advance !
Click to expand...
Click to collapse
you need install original recovery and extract update.app from B100 firmware, then you place it to "dload" folder in your sd card and flash using 3 buttons. you cant full brick by messing with root. only soft brick which is fixable.
Ok I'll try it. I will post again if something comes wrong.
Thanks a lot for your help
I forgot to ask about one thing : I'm owning a phone with NEM-L51 model and I don't know if I can use NEM-L22 firmware ? If I can't, where can I find the right files to downgrade this specific model ? All the firmware files I see on the web are for the NEM-L22...
EDIT : I've found the B102 firmware for NEM-L51 model (Europe + UK) can I take it for the downgrade or is the B100 specific version needed ?
ClementNerma said:
Hello everyone,
I bought a few days ago the Honor 5C and decided to root it. So I installed the TWRP (Nemo) using "fastboot", downloaded a ZIP of SuperSU and placed at the root of the internal storage. But when I try to enter recovery mode by using "adb reboot recovery" or by pressing the Volume Up + Power buttons, the phone vibrates, displays nothing for 2-3 seconds (not even a black screen, the screen is completely off). After that the "Honor" logo is dispayed for less than a second then the screen "Your device has been unlocked and can't be trusted [...] Your device is booting now..." with no option at all.
The problem is that this screen stays forever and never displays the recovery mode screen. If I entered this mode using the physical buttons, I can just press "Power" for a few seconds and then it reboots the phone normally. But if I used "adb", each reboot makes the phone entering again the same recovery mode that doesn't work, so I use the Volume Up + Power key while the phone is connected via USB to my laptop to enter e-recovery mode, then reboot normally.
Does anyone know how to solve this problem ? I really want to root my phone but I don't know what to do for now.
Thanks by advance for your answers !
Click to expand...
Click to collapse
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
gopinaidu77 said:
It is easy bro . When the phone shows warning logo , click volume up + power and don't leave it untill it find a vibration . Leave the buttons after 3 seconds u felt vibration
Click to expand...
Click to collapse
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears. This is really strange, when I see videos I find on YouTube all Honor 5C owners that just do what you say enter in recovery mode, but it's not my case... I really wonder why.
I don't know if that can help you to understand, but I'm using a french Honor 5C phone, with EMUI 5.0 / Android Nougat like I said previously, model is NEM-L51 and I did the Android Nougat update several days ago using the Honor's official update application, which is natively installed on the phone.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
ClementNerma said:
Thanks for your help but this doesn't work. When I do what you say it goes again and again to the same warning screen which never disappears.
About the firmwares, I've tried the B102 version for the specific model I own but each time (I downloaded the update ZIP several times, the first one with two folders named '1-main' and '2-vendor', the second with just the 'dload' files) the update stops at 5 purcents and says "Software install failed! Incompatibility with current version. Please download the correct update package."
What can I do to solve this problem ?
Click to expand...
Click to collapse
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
gopinaidu77 said:
When u click on vol up + power in warning screen .dont leave it till it shows erecovery . Probably its 6-7 seconds
Click to expand...
Click to collapse
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video of when I boot my phone in normal mode / recovery mode / erecovery mode ?
ClementNerma said:
When you do Volume Up + Power it attemps to enter recovery mode, not recovery (that's what I read), excepted if a USB cable is plugged in (which is not my case). And that still doesn't work.
However, I'm able to enter erecovery mode by turning on the phone with only the Power button, then holding "Volume Up" as written on the screen (there are 3 boot options that shows up, but only when I boot normally) and I enter erecovery mode. But I can't do anything interesting in this mode, just download the latest firmware (which fails at each attempt, even when I'm connected to a working WiFi point), shutdown or reboot the phone normally.
Shoud I show you a video ?
Click to expand...
Click to collapse
No i understood
gopinaidu77 said:
No i understood
Click to expand...
Click to collapse
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
EDIT : I forgot to precise the long model name of my phone : NEM-L51C432B350. On Firmware Finder Rewrite it shows that there are only two update packages for it, published on 20.04.2017... So I wonder if I need to download the three files shown in the filelist of the big update (1.68 Gb) and install them on the device ?
ClementNerma said:
The problem is that I can't enter recovery mode, each time I try to install an OTA or full update package from the /dload folder on the SD card it fails, so I can't downgrade at all. Do you know a link that sure points to the good update package version for the Honor 5C on EMUI 5.0 in order to downgrade to Marshmallow ? I've found several links during my searches but I don't know if the installation fails because of a phone's bug or if it fails because of an invalid version.
Click to expand...
Click to collapse
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
gopinaidu77 said:
Stock recovery wont have an option . There is no graphical UI for installation.
Downgrade or update is just a manual procedure.
In order to roll back , u need to install a roll back package and then the origional MM package . Using the three button combination
Click to expand...
Click to collapse
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
ClementNerma said:
Ok but where can I find this rollback package ? I only find files for the NEM-L22 model...
EDIT : If found the Russian version from here but is it ok to take it ?
Click to expand...
Click to collapse
Yes that's fine.
gopinaidu77 said:
Yes that's fine.
Click to expand...
Click to collapse
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
ClementNerma said:
Ok so in the guide I found on the same page I linked in my previous post (the guide is hopefully written in english) it says that the phone must haven't been rooted or even unlocked, so I prefered to relock the bootloader (and completely reset my phone, for the third time at least in two days).
But then I realized I would need to have an unlocked bootloader for the flash so I unlocked it again, but now the device stucks on "Your device is booting now..." with no option at all whatever I do, whatever the buttons I push... I'll really start to think I'm simply idiot
I'm searching on how to solve this new problem and unbrick the phone... 'cause I can't even shutdown it, the "Volume Up + Power" combination while USB plugged in or anything else doesn't work this time.
EDIT : Okay so my phone seems to really be hard-bricked. My phone just stays at the screen "Your device is booting now..." with no option at all, I can't shutdown it, I can't enter recovery or erecovery mode. Does anyone know what to do or is my phone definitively bricked ?
Click to expand...
Click to collapse
Long click of power button will shut down the phone. Why u always refer about usb cable . Follow all instructions unplugged
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
gopinaidu77 said:
Long click of power button will shut down the phone.
Even the same happend for my honor 8 . Ur device isnt hard bricked .its just a soft brick
Click to expand...
Click to collapse
Nope, long click of power button will just reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
ClementNerma said:
Nope, long click of power button will hust reboot the phone and make it displaying the same screen again and again.... I can't shutdown it at all. I've tried several times but it doesn't work :crying:
Click to expand...
Click to collapse
Yes , the same happend for me ! U can unbrick bro
gopinaidu77 said:
Yes , the same happend for me ! U can unbrick bro
Click to expand...
Click to collapse
But how can I unbrick the phone ? I can't enter in any mode, I can't connect it to PC, I can't shutdown the phone, I can't use ADB or FastBoot on it, I can't reflash the bootloader or install a TWRP, downgrade or boot normally, I can't do anything !
So how could I unbrick it ? For now it's just still displaying "Your device is booting now..."
If you know how to do, please tell me so I can unbrick my phone. Sorry for asking you so many things I don't understand myself why there are so many problems...
Hello everybody, I have a problem, and I wanted to "relock" my mobile phone boot loader after that the Huawei P8 Lite 2017 wanted to do a factory reset, but it stops at 99%.
I need urgent help.
Best regards
Klotz900 said:
Hello everybody, I have a problem, and I wanted to "relock" my mobile phone boot loader after that the Huawei P8 Lite 2017 wanted to do a factory reset, but it stops at 99%.
I need urgent help.
Best regards
Click to expand...
Click to collapse
try to flash Stock ROM
.
i cant
persona78 said:
try to flash Stock ROM
.
Click to expand...
Click to collapse
i cant to connect the phone with the computer and i cant load bootloader.
Someone said I can do nothing but send the phone.
and i cant go in the recovery.
Klotz900 said:
i cant to connect the phone with the computer and i cant load bootloader.
Someone said I can do nothing but send the phone.
and i cant go in the recovery.
Click to expand...
Click to collapse
Try connecting phone to pc with usb(doesn't matter does pc recognize it) and then try to boot to boot loader.
Or if 2017 model has dload force update method you can try that, just make sure you have lots of battery of it refuses to start at all.
keikari said:
Try connecting phone to pc with usb(doesn't matter does pc recognize it) and then try to boot to boot loader.
Or if 2017 model has dload force update method you can try that, just make sure you have lots of battery of it refuses to start at all.
Click to expand...
Click to collapse
it have enough im sure...
the bootloader dont start i press Vol. - and Power at the startup if i connected the USB cable.
after this i see the huawei logo, and then the handy starts to the "Factory reset" and stopts at 99%
Klotz900 said:
it have enough im sure...
the bootloader dont start i press Vol. - and Power at the startup if i connected the USB cable.
after this i see the huawei logo, and then the handy starts to the "Factory reset" and stopts at 99%
Click to expand...
Click to collapse
Try force update if your device has that possibility(Vol+ and Vol-). How long did you waited at 99%, I think I have always got some error message in similar situation when I've waited like 10mins.
keikari said:
Try force update if your device has that possibility(Vol+ and Vol-). How long did you waited at 99%, I think I have always got some error message in similar situation when I've waited like 10mins.
Click to expand...
Click to collapse
Vol. + and Vol. - does nothing...
i wait for 99% ca. 100 seconds thats unreal ...
Klotz900 said:
Vol. + and Vol. - does nothing...
i wait for 99% ca. 100 seconds thats unreal ...
Click to expand...
Click to collapse
Bootloader i think is press vol -, don't release and plug USB
to flash rom you need default recovery in phone.
To flash copy update.zip to sd card, whit phone off press vol -, vol+ and power.
Or create a dload folder in sd card and copy to inside the update.app, can extract from update.zip, then whit phone off press vol -, vol+ and power.
.
Hello everyone,
I have this P9 Plus laying around that I wanted to use as a backup phone in case my main dies suddenly but when I turned it on, I was faced with a ton of unprecended events.
It was unlocked and a custom rom was flashed a couple of years back. But now when I turnt it on, I'm facing these messages:
1 - After this message, the screen freezes
Your device has been unlocked and can't be trusted
To learn more visit [website]
Your device is now booting
Click to expand...
Click to collapse
2 - After this message, it boots into eRecovery
Press power key to continue
Press voulme up key up to 3 seconds to enter erecovery to restore your device
Your device will continue to boot 5 seconds later if there is no operation
Click to expand...
Click to collapse
It then connects to the Wifi and greets me with
Getting package info failed
Click to expand...
Click to collapse
3 - When completely shutdown, I press down on the Vol down key and plug it into the comptuer, triggers Fastboot with this on screen
AP_S_COLDBOOT
NA
volumnkey_down_press_process_func
PHONE Unlocked
FRP Unlocked
Click to expand...
Click to collapse
I can flash TWRP recovery (twrp-3.7.0_9-0-vienna.img) but it doesn't want to boot on it after I flash it, it goes back to message #1.
I really cannot wrap my head around this. I really don't know where could be the problem from ? What's preventing everything to compute correctly ? If you have any leads on this I'd be more than happy to try them !
Thanks a lot y'all !
Cheers !