Question turning on the screen by tapping on the display - Google Pixel 7

I have everything turned on, but I can't turn on the touch screen. Only by switch.
any solution?

Settings > Display > Lock screen > Tap to check phone On

It is on

Reboot

If the phone is flat it won't work you'll have to angle the phone a little for it to work

liggerz87 said:
If the phone is flat it won't work you'll have to angle the phone a little for it to work
Click to expand...
Click to collapse
It works on my P7 when it's flat.

Ki77erB said:
It works on my P7 when it's flat.
Click to expand...
Click to collapse
Yes, mine too.
@droberto2021 check that you dont have the upper phone's part covered, i mean near the front camera where sensors are. If you cover that the tap will not work

Ki77erB said:
It works on my P7 when it's flat.
Click to expand...
Click to collapse
I stand corrected I just tried it did work lol

Related

[Q] I changed touch screen and now I got a wierd error

Hello!
I have a weird error on my diamond 2 - I dropped it on the floor, so the touch screen got broke. I bought a new original one and replaced it as myself, which wasn't that difficult. The strange thing is that now when I move my finger up and down on touch screen the pointer moves side to side, and when i move finger from side to side the pointer goes up and down...? It's just like touch screen was rotated 90 degrees. Have tried to do a factory reset via a guide I found but it is still the same. Is it supposed to recalibrate the phone somehow?
Could this be a fysical connection error?
I tried to put cable in the other way but it was to short, and I can't figure out how to put it another than it is now. If i try to force it around 180 degrees it will be ripped off and break.
is your problem already solved? i replaced my cover as well. i think the connection ot digitizer is not pluged in correctly, it is not in the middle. it is also possible that your replacement is scrap
kadettilac89 said:
is your problem already solved? i replaced my cover as well. i think the connection ot digitizer is not pluged in correctly, it is not in the middle. it is also possible that your replacement is scrap
Click to expand...
Click to collapse
Try to align the screen
kadettilac89 said:
is your problem already solved? i replaced my cover as well. i think the connection ot digitizer is not pluged in correctly, it is not in the middle. it is also possible that your replacement is scrap
Click to expand...
Click to collapse
Hm, I'll check it out. It's possible connector ended up wrong, I was most happy that I got in place
Something72 said:
Try to align the screen
Click to expand...
Click to collapse
How do I align the screen?
Capitan2008 said:
How do I align the screen?
Click to expand...
Click to collapse
Start Menu / Settings / System / Screen / Align Screen
Something72 said:
Start Menu / Settings / System / Screen / Align Screen
Click to expand...
Click to collapse
I tried to go maneuver via the menu but it was impossible. But I didn't give up and Google instead and found this - "You need to simultaneously hold down Volume Up and Volume Down on the side of the device, and while holding them both down, just tap the screen and it will go straight to the alignment screen."
This works and my screen is now aligned, but still I got it's 90 degree ccw rotated.
I forgot to mention that i have replaced digitizer two times - one before this one, reason was i thought first one was broken/faulty

Problem in the status bar

Has anyone had this problem of the status bar does not go down with the vertical mode screen on the Xperia Z3 compact? Only down after a long drag your finger on the screen, but the strange thing is that in landscape mode screen down normally. What can it be? Can someone help me?
Santos8913 said:
Has anyone had this problem of the status bar does not go down with the vertical mode screen on the Xperia Z3 compact? Only down after a long drag your finger on the screen, but the strange thing is that in landscape mode screen down normally. What can it be? Can someone help me?
Click to expand...
Click to collapse
Try with two fingets
AlienTechGR said:
Try with two fingets
Click to expand...
Click to collapse
???? If not to help not enter
Santos8913 said:
???? If not to help not enter
Click to expand...
Click to collapse
Sorry, typo error. I meant, you should try to scroll down with two fingers.
AlienTechGR said:
Sorry, type error. I meant, you sould try to scroll down with two fingers.
Click to expand...
Click to collapse
not with a only, which is normal, I have to spend several times until the screen recognize the movement
AlienTechGR said:
Sorry, typo error. I meant, you should try to scroll down with two fingers.
Click to expand...
Click to collapse
I just realized something, when you step harder the bar down
perhaps the protective film, but it would be possible as in landscape mode works normally
Santos8913 said:
I just realized something, when you step harder the bar down
Click to expand...
Click to collapse
I've the same problem. Any solution?
A serious bug to a top player from Sony, this is a joke , a shame for the brand ! I'll search the web , the way no one has a solution here.
Santos8913 said:
A serious bug to a top player from Sony, this is a joke , a shame for the brand ! I'll search the web , the way no one has a solution here.
Click to expand...
Click to collapse
are you sure the upper part of the touch screen is working properly? that was my problem and i don't recall dropping my phone too hard to mess up the touch screen....did factory reset and nope it was definitely the touchscreen
My already dropped some times, but there is nothing wrong in its outside and its functionality remains excellent taking this error now. And the status bar down the normal horizontally, so it's not the hardware. It's a software bug and also does little more than a year have the appliance. I've seen some reports of the same problem in the Xperia line on the Internet, just not speak the solution exactly. I took an original firmware and put one here too, I do not know if it has to do with the problem.
the top of the screen is the normal friend, as I said, the landscape mode screen functions normally, even when I'm playing a game, the problem is a software error, if the display hardware would have committed it all
Can I get rid of it, if I install any custom ROM?
It doesn't work... plz help me... my ph is sony xperia z3 model no: D6653
Anyone who cannot swipe down notifications or quick settings, due to a broken digitiser, can follow these instructions:
[emoji7]
Download 'All in one Gestures' app from the playstore.
Go to the 'SWIPE' tab.
Enable.
Under 'Edges' , select 'Top Area'.
Then via the apps settings, choose 'Personalization'.
Now under 'Swipe Area', go into 'Edge Preference.
Make 'Opacity' 0%
With 'Edge Sensitivity' start from 0% and keep moving the slide left until the swipe down works, mine is set at 90px.
'Edge Width' 100%
'Swipe Distance' 0%
Now under 'Touch Feedback' turn off both 'Toast Message' and 'Animation'.
Then turn down 'Vibration Intensity' to '0'
Done.
You now have the screen functioning as normal.
[emoji7]
ATTN:
Remember to keep 2 backups of this apk, in approx 30 days, Google will remove apps that use the accessibility service.
News:
https://www.xda-developers.com/google-threatening-removal-accessibility-services-play-store/
**This phone is bendable 0.1mm will open your phone, anodized aluminium bumper recommended for jeans and stairs, I also recommend tempered glass, both sides. B7000 glue for repairs, no heat, clothes pegs, 48 hours.

Dt2w always wakes in my pocket.

Hello guys, as the title says my phone always wakes up in my pocket and starts dialing and doing stuff...
Any way to fix that?
ProRules said:
Hello guys, as the title says my phone always wakes up in my pocket and starts dialing and doing stuff...
Any way to fix that?
Click to expand...
Click to collapse
When there is something magnetic in your pocket the phone is activated by the magnet sensor.
When you carry the phone in the pocket with screen turned to the skin then the phone is activated by yourself, because the screen is capacitative.
Belt case ?
NLBeev said:
When there is something magnetic in your pocket the phone is activated by the magnet sensor.
When you carry the phone in the pocket with screen turned to the skin then the phone is activated by yourself, because the screen is capacitative.
Belt case ?
Click to expand...
Click to collapse
Can't I somehow make it work with proximity sensor?
I dont have magnets i n my pocket.
ProRules said:
Can't I somehow make it work with proximity sensor?
I dont have magnets i n my pocket.
Click to expand...
Click to collapse
Turn the screen away from your body/skin.
The proximity sensor works when activated after dialing to turn the screen OFF.
Or turn ambient display off
Sent from my Nexus 6 using XDA-Developers mobile app
ProRules said:
Hello guys, as the title says my phone always wakes up in my pocket and starts dialing and doing stuff...
Any way to fix that?
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/android/apps-games/app-wake-gestures-t3030399
NLBeev said:
When there is something magnetic in your pocket the phone is activated by the magnet sensor.
When you carry the phone in the pocket with screen turned to the skin then the phone is activated by yourself, because the screen is capacitative.
Belt case ?
Click to expand...
Click to collapse
blanco2701 said:
Try this
http://forum.xda-developers.com/android/apps-games/app-wake-gestures-t3030399
Click to expand...
Click to collapse
Thanks man! That fixes the issue, BTW I know it might be a bit off topic but.. What is xposed? I've seen it everywhere and in that link too, cheers.
ProRules said:
What is xposed? I've seen it everywhere and in that link too, cheers.
Click to expand...
Click to collapse
Xposed*is a framework for mod's that change the behavior Android. Root needed and downloading xposed-modules.
Never tried it, because I prefer a system close to stock. Therefore I use the prerooted lite stock rom of Danvdh.
http://forum.xda-developers.com/showthread.php?p=59561445/
I personally use Sweep to wake (up) rather than double tap to wake. It seems more reliable and doesn't trigger by accident.
Dopamin3 said:
I personally use Sweep to wake (up) rather than double tap to wake. It seems more reliable and doesn't trigger by accident.
Click to expand...
Click to collapse
That's right. But it works well with 4 taps
NLBeev said:
Turn the screen away from your body/skin.
The proximity sensor works when activated after dialing to turn the screen OFF.
Click to expand...
Click to collapse
This is my best suggestion. Turn the back of the phone towards your skin in your pocket. Absolutely the simplest solution.
Never had this happen nor should it happen. Ambient display is normally the cause and why most people turn it off. It is more likely that you are hitting the power button while it is in your pockets. Mainly to those dumb enough to keep it in their back pocket.

option to turn smart cover on/off?

I'm not 100% but I think I had the option in MM to turn smart cover on/off. Recently upgraded to Nougat and today i put on an old cheap smart cover case in preparation for a road trip. The smart cover function works as the screen will turn off when i close the lid and turn on when I open it. However i'm a paranoid person in nature and prefer to do it the hard way, ie press a button and visually confirm the screen is off.
I played around in settings but can't seem to find a way to change it. am I missing something?
Mm710 said:
I'm not 100% but I think I had the option in MM to turn smart cover on/off. Recently upgraded to Nougat and today i put on an old cheap smart cover case in preparation for a road trip. The smart cover function works as the screen will turn off when i close the lid and turn on when I open it. However i'm a paranoid person in nature and prefer to do it the hard way, ie press a button and visually confirm the screen is off.
I played around in settings but can't seem to find a way to change it. am I missing something?
Click to expand...
Click to collapse
Press the power button to turn the screen off ....
jhill110 said:
Press the power button to turn the screen off ....
Click to expand...
Click to collapse
i'm more worried about sometimes the cover can move or open by mistake, either in hand or in the luggage. i don't want the screen to be turned on by mistake.
Mm710 said:
I played around in settings but can't seem to find a way to change it. am I missing something?
Click to expand...
Click to collapse
The option is still there. I don't have my tablet at hand ATM so I can't tell you where...
Update:
Settings > Advanced options > Acessories
edisso10018 said:
The option is still there. I don't have my tablet at hand ATM so I can't tell you where...
Update:
Settings > Advanced options > Acessories
Click to expand...
Click to collapse
thank you! exactly what i was looking for.

Animation around the camera hole when switching between front and rear cameras

I've had my US unlocked Galaxy S10 for a few days now and one thing I've noticed is that the animation around the camera hole doesn't work when I am in the camera app and switch between the front and rear cameras. Has anyone else had this not work on theirs? Is there a setting that might affect this? I like this animation and want it to work on my phone. Any help you guys can provide is most appreciated!
I was told that led has been removed for now because they made a galaxy case that does some led stuff or something like. They might put it back in an update but no telling when or that's at least what I was told.
Sent from my SM-G975U using Tapatalk
brianrudy said:
I've had my US unlocked Galaxy S10 for a few days now and one thing I've noticed is that the animation around the camera hole doesn't work when I am in the camera app and switch between the front and rear cameras. Has anyone else had this not work on theirs? Is there a setting that might affect this? I like this animation and want it to work on my phone. Any help you guys can provide is most appreciated!
Click to expand...
Click to collapse
Do you have the virtual bezel turned on? Because if you do, that turns off the animation around the camera hole.
CountVonKrolock said:
Do you have the virtual bezel turned on? Because if you do, that turns off the animation around the camera hole.
Click to expand...
Click to collapse
I'm not sure what the virtual bezel is so not sure if it is turned on. Where / how do I check that?
brianrudy said:
I'm not sure what the virtual bezel is so not sure if it is turned on. Where / how do I check that?
Click to expand...
Click to collapse
If you don't know what it is, then you probably don't have. The virtual bezel is the black bar that covers the hole in the display and pushes the status icons and notifications down. It can be found in display -> full screen apps -> hide front camera
CountVonKrolock said:
If you don't know what it is, then you probably don't have. The virtual bezel is the black bar that covers the hole in the display and pushes the status icons and notifications down. It can be found in display -> full screen apps -> hide front camera
Click to expand...
Click to collapse
Gotcha! You're right, I don't have that turned on.

Categories

Resources