Every time I try to do the rom upgrade for my PDA2K the device does a soft reset (when it's reset it then reconnects to activsync, and the green logo reappears) and after a while the ROM upgrade software tells me there is an Error 101 Connection Error. It's driving me nuts, I've tried all sorts of variants, soft reset first, hard reset first, USB port, USB2 port, Activesync 3.7.1, activesync 3.8, Windows XP, Windows 98. I don't understand why there is a connection error, because I can connect to activesync correctly, it even reconnects after the ROM upgrade causes it to do a soft reset. Please help! I've even tried following directions to copy the temporary files and running those directly but the result is the same.
Bizarre
Try connecting your device then stopping activesync (task manager, then stop "WCESCOMM.exe" in XP), then run the upgrade.
Regards,
Dom
Hi,
Thanks for the suggestion. Unfortunately the process kept reappearing during the attempted upgrade and I still got the Error 101 message.
When activesync starts, let it complete the sync and then go ahead and run the upgrade. I experienced this last weekend
victor
I've tried it dozens of times. I've let it sync on many occasions, and I've also tried it on many occasions with it connected as guest.
I tried iMate online support for the third occasion regarding this matter, and as before once I tell them what the problem is they then don't respond (they also never respond to my emails either).
I have actually considered hiring a laptop for 24 hours, just in case it's my Mac that is causing the problem (but I'm using Microsoft Virtual PC running Microsoft Windows XP to upgrade the ROM on a phone running Microsoft Pocket PC, so I really don't see why it shouldn't work. Normal sync, and installing software via Activesync work fine. I'm on the brink of selling the device because it's just caused me too much grief. The trouble is, it's put me off ever buying another Pocket PC, and I cannot find a suitable alternative. Every device I read about has some reason why it wouldn't be suitable.
At last I've had the opportunity to do the ROM upgrade on a 'real' PC running Windows XP.
It behaved in EXACTLY the same way as running Virtual PC on my Mac (even down the the odd delay before Activesync recognises that the phone is connected - I had assumed that this was because of the inefficiency of running an emulator!).
Error 101 connection error every time. Firewall switched off. Tried with and without hard reset.
I wonder if there could be a hardware fault with my phone? The pins on the phones connector all look fine.
Now I am really stuck, I seem to have completely run out of options (and I don't want to send the device of the the middle east either!).
One last idea. Is there anything more than a hard reset? I've just removed the battery. If the unit is completely deprived of power will this take it back to factory settings any more than a hard reset?
NOPE!
Hard Reset is the best you can get bar removing the insides of the phone and swapping it with someone else's!!!
Dom
if you do remove the battery you need to put the lock switch back into the postion as if it the battery was in. This seems to make the phone think that the battery is dead and then drain the internal backup one.
Hi
I have been playing with this for a day now, and it has introduced more bugs in the wifi functionality. If you want to use WiFi from your IIs then I would avoid this 'update' like the plauge.
What you get:
- ROM: 1.31.00 WWE (13th Dec 04) so this is 2.5 months old
- Radio 1.06.00 (1.06.02 is latest)
- ExtRom: 1.31.139 WWE (no real updates to existing progs)
Whats Better
---------------
- The camera performs better in low light conditions (I used to get vertical lines on the screen
- Bluetooth stack build 3500. A vast improvement, but the latest is now build 3900 which some say solves the 'scratching noise' that is heard in some headsets
Whats Worse/Not Fixed
---------------------------
- O2 Active V3.5. Its bloody awful - spends its life redrawing the screen, its very sluggish, and adds nothing to the today screen. I never used to use the old version, but having the O2 icon was handy for its ability to list the active connections and terminate them. Much is made of the ability to change the position of the icon (which I never found to be a problem in the first place. Tapping the new icon starts O2 Active rather than listing the active connections. To list active connections, you need to tap and hold for 5 seconds. I find that after tapping and holding, I get the menu, but that the menu then fails to respond to my 'close connection' taps. I reverted back to the old O2 active program.
- WiFi. They have completely buggered it up. It was unreliable at best beforehand. I have a network at home, which I finally pursuaded the device to connect to after multiple resets. I headed into work this morning (2 AP's) switched it on, and it just sat there searching for the network. I went into Tools-->Network cards, and see the work network listed as 'connected' (it was not connected, I had not given it the PSK yet). I soft reset the device, and it finally saw the network and prompted with the usual 'Internet/Work' dialogue. I was then asked for the pass key. At this point I noticed that there is no longer a possibility to activate the soft keyboard in order to enter the pass key (A right pain in the arse when the passkey is just a random multicase/numeric key, and all you get are ** on the dialogue). Anyway, I entered the key, and the device refused to get a valid IP address. Doing IPconfig showed that the wireless card was trying to use an old GPRS IP!!! I tried a renew (3rd party ipconfig tool). I tried stopping and starting wifi. Eventually, I soft reset (still the same), so I stopped wifi, soft reset, started wifi - and *finally* it decided to go and get itsself an IP address. (this is a bug I saw in the old firmware, but its worse than it used to be).
- WiFi still marks the wrong networks as 'available', i.e at work, 10 miles from home, my home network is marked as 'available' and my work network is marked as 'unavailable' !!! (this is an old bug)
- In Network adapters, the dialogue, 'My Work Network Connects To:' is blank, and there is no longer a possibility to select work/internet (options are blank). This is new to v1.31.139 (anyone else also missing this)
- If you select a wifi connection and change it from being a 'work' connection to an 'internet' connection then the change does not stick. This is new to v1.31.139
- In the MMS applet, it is no longer possible to select a 'modem' directly. I used to be able to select 'O2 Active'. You now have to select a profile that includes an appropriate modem. This is new to v1.31.139
- When editing a network profile in 'network management' eg: My ISP. the device still forgets to display existing modem/vpn connections. (same as old version).
Out Of Date Software / missing software
-----------------------------------------------
- Photo Contacts (CallerId cab) is still version 1.17 (latest is 1.20)
- Missing O2 plus - other o2 devices include this
- Missing Intelipad
- Missing Smartdialer
- Old build of Java Midlet software
- Old build of MMS composer software
Other Thoughts
------------------
For my money, the device feels more sluggish than it did before. Though its difficult to prove this!
O2 has spent far too much time on that O2 Active rubbish - does *anyone* actually use this [email protected]?? - and not enough time integrating/testing the latest versions of CE, drivers, and third party apps.
I'll add more to this as I find new bugs, and send it all off to O2 in a couple of weeks.
What I am now using
------------------------
I am now using v1.31.139 + Bluetooth build 3900 + PhotoContacts 1.20 + Java build 1004.
----------------------------
Additions: 1/3/05
- SMS notify no longer seems to work. Anyone else suffer from this? MMS notify works fine and SMS notify is switched on. Perhaps the notify event is missing, but I have no idea how to sort this.
- VPN over wireless lan is still not possible - it tries and fails to connect. VPN over GPRS still works OK.
Additions 02/03/05
- SMS Notify problem is *not* to do with the rom update. I removed the registry key: HKLM\software\microsoft\inbox\svc\outlook since I had no need for the outlook folder in inbox. Removing this also kills off SMS notify!! I backed up, hard reset, preventing the stuff in the extended rom from installing. Installed PHM regedit, exported the outlook key, restored my backup and imported the reg key!!
- Internet/Work settings missing from Wlan setup. After restoring the backup, these had returned. Pretty strange, perhaps they were linked to the same registry key. No additional software bar the contents of the extended rom had been installed. If anyone else gets this, I suggest back, hard reset, restore might fix it.
Regards
Nigel
I have the same version with the latest radio build and cannot got the device to connect to my home Wifi what so ever.
Not exactly much use. It detects the network but refuses to connect. Either it says its connected but does not get an IP or it continously prompts for the network key.
I have also upgraded and am finding that the device often freezes when I try and switch it off, this happens about once or twice a day needing a soft reset.
I dont use the active stuff (which I never use) and am dissapointed that the O2 icon now starts O2 active rather than list the state of connections and allow you to trun them off i.e GPRS.
I agree the device does seem to be slower, I think I will be going back to the original code base and applying the BT patches, anyone know where there is a CAB installer for 3900?
check the ftp server
ftp://ftp.xda-developers.com/BlueAngel/CAB_Files/Bluetooth Upgrades/
username xda
password xda
its the file that ends in 3900.
I installed 3900 over the recent O2 update (3500) and all went fine. Just do a soft reset before playing with bluetooth or it will moan about an expired stack.
Nigel
SMS Notify
Hi
Anyone else found that the SMS notify stops working once the latest O2 update is installed. MMS notify works, but SMS does not - its damned anoying!
UPDATE: Found the reason for this see end of original post
Nigel
Thanks for the comments on the update. I think I will stay with the original 1.12 ROM! Where can you get the other updates for the Camera and Java and Bluetooth etc? I'm currently running Bluetooth 3500.
Cheers
This is why you should sell you XDA IIs on ebay and buy a XDA IIi :lol:
Well that IS a concept! Thanks made me grin!
Hi since I installed the new Rom, my clock keep on freezing. The phone goes on standby > then it freeze. If I wake up the phone , it will still be frozen.
I have to click on start > Today in order to refresh it. :evil:
Any ideas ? It's still happening with no other today pluggin. :x
Would you recommend we dont bother upgrading the ROM atm then?
I upgraded also - the process was simple and took around 10 mins. This made my Bluetooth much more reliable and over a greater distance. I also find the 2s locks up frequently and requires soft resets.
Does anybody know how to remove the entire o2 software - I dont know anybody that uses it and Im sure it would speed up the whole device.
Remove entire O2 software:
You mean everything in the extended rom or just o2 active?
Hard reset, and when the message pops up about installing blah in 3 seconds (after you have done the touchscreen config) then soft reset. This gets you a plain vanilla HTC Blue Angel before the operator has installed its sh1te on it.
You can then selectively install just the bits you want, download the extended rom from the ftp site here, or unlock yr extended rom, copy out the cabs to main memory/SD etc, and then tap just the ones you want to install them.
If you just want rid of o2 active, then hard reset, and wait until the corporate/personal? message appears and then soft reset. O2 active is the last thing to be installed.
Nigel
mhanbury:
Hunt them down on the FTP site. Compare the version/build numbers with those in the new O2 extended rom.
Nigel
eskimofisherman said:
I upgraded also - the process was simple and took around 10 mins. This made my Bluetooth much more reliable and over a greater distance. I also find the 2s locks up frequently and requires soft resets.
Does anybody know how to remove the entire o2 software - I dont know anybody that uses it and Im sure it would speed up the whole device.
Click to expand...
Click to collapse
Hard-reset your xda.
When the Personal/Corporate screen comes up, select corporate and enter 0506 - zero five zero six
This won't install active.
I'm getting a new XDAIIs (my 3rd one) , I will stay away from the new update and just put the bluetooth/ radio and contact manager manually.
That new update is just a piece of [email protected] :evil:
jeux_1 said:
I'm getting a new XDAIIs (my 3rd one) , I will stay away from the new update and just put the bluetooth/ radio and contact manager manually.
That new update is just a piece of [email protected] :evil:
Click to expand...
Click to collapse
If you buy a new XDAIIs in the UK now you will get it with :
ROM Version: 1.31.00 WWE
ROM date: 12/13/04
Radio Version: 1.06.00
Protocol Version: 1337.38
ExtROM Version: 1.31.139 WWE
Ive had mine for 2 days now and ive had to soft reset about 6 times! and Hard reset once!
and this is annoying the hell out of me! can anyone tell me what im doing wrong. Why is it that whenever I do a hard reset I have to change the name of my activesync folder? If I try to keep them the same, it says I cant because there is already a device with that name!?!? :twisted: Or am I just being a noob?
irelmo said:
jeux_1 said:
I'm getting a new XDAIIs (my 3rd one) , I will stay away from the new update and just put the bluetooth/ radio and contact manager manually.
That new update is just a piece of [email protected] :evil:
Click to expand...
Click to collapse
and this is annoying the hell out of me! can anyone tell me what im doing wrong. Why is it that whenever I do a hard reset I have to change the name of my activesync folder? If I try to keep them the same, it says I cant because there is already a device with that name!?!? :twisted: Or am I just being a noob?
Click to expand...
Click to collapse
This is really wierd. My IIs works fine - doesn't lock up, doesn't need hard resets or anything so drastic. I don't have any other apps on the device though, just the standard one's O2 supplies (GPRS Monitor etc).
What other apps are people running? I'm guessing Today screen plugins are causing grief (Pocket+ etc)
yeah I did tried my phone with no today plug in but it is still crap, was working just fine with the previous rom......... what have I done :x
At least it keeps me busy....
The problem is you should have bought a XDA IIi not a XDA IIs.
Mike
I have a very strange problem and i would like to know if anyone has the same or its just me.
Firt of all i have Qtek 9090 ROM:1.22.00wwe,radio:1.08.00,Extended Rom:1.22.167WWE.
When i try to start bt i get an error message saying that"bt failed to start due to limited memory for the driver.You have to restart your device in order to begin using bt"
I restart the device and everything ok.But if i turn on wifi open a few progs then turn power off(to ppc) when i turn ppc on i get the same message.
NOTE:No programmes installed.Clean device.The problem was the same even before upgrating radio version to 1.08.00.I have bt version 1.0.0 build 3500
but no change to the problem even with build 3900. :x
I have the same problem - you'll get used to it
PEACE AND B WILD
Hi,
I also have the same problem, I am not sure if it is 108 or 3900.
Simple
At least im not the only one.I am starting to think that it's a hardware problem .But what really makes me mad is that i payed 950euros to have this problem :evil: My previous S100 worked like a charm :roll:
I upgraded my XDA 2s to WM5 and patched all the problems and got them worked i:e:Camera,Album,blue tooth,backlight, Buttons,MMS, andVideo.
1) But I can not Sync through craddle just does not find the device, but can easliy Sync through blue tooth and infra red.
2) WiFi easily finds the network and shows connected and shows the signal strength as well, but once I open the explorer type the addrtess press go after a moment an error message shows up saying Page can not be found. I tried so much to find the solution but in vain I must have reloaded the upgrade more than 50 times but failed every time to fix it.
Can any one up there could help please.
Hi,
I upgraded to several different versions of WM6.x (almost all above) but have the same problem. After UG I can't install any software through AS or browse the device with Explorer. Explorer shows no contents and the software screen opens but shows only a frame. I had the same problem with a Hermes and solved it by unchecking the extended network options in settings>connections>USB to PC but when I do that with the MDA II it freezes when I place it in the docking station. I then have to SR. I replaced the serialusbfn.dll with the one available on another post but AS will no longer recognize the device.
Any ideas? I've downgraded to WM2k3SE until I find something that works.
Btw, yes I did do a proper HR (n, yes,yes)
Cheers
First of all you need AS-4.5
If yes, check the settings in windows firewall.
If you are using some other firewall or virus guard, disable it temporarily.
Right click on AS icon in system tray & select Connection manager, enable USB.
Delete previous partnerships in AS.
Restart the PC & try to connect.
If it fails you can follow the diagnostic procedure which gives a error code, or possible cause. Check the error code with Microsoft web site.
You can also try to uninstall & reinstall AS
Hi,
I've tried all of that before (should have said so, b4). Here is a little more info:
I sync with 2 different computers, one at home (no network) and one at work (network). Both run WinXP Pro. I only have this problem with the work computer and only when WM6.x is intalled on a MDA II. The problem goes away when using WM2k3SE or when using a Hermes with WM6.x. Since the Hermes works without problem, I don't think it's the desktop.
Something causes the MDA to freeze when activesynce starts. Even the charging light stays on when I pull the unit out of the docking station. Backlight stays at full brightness and it doesn't go to sleep after a time. No buttons (even on/off) work. I can only SR.
Help!
Known problem
Read and try this:
http://forum.xda-developers.com/showthread.php?t=396081
Hi Muckelmaus,
thankx but I tried that. It causes the device to not be seen at all. I cradle it and nothing happens.
Cheers