ERROR 144 : RADIO ROM UPDATE ERROR - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hi There !!
When i doing upgrade for my imate PDA2K i have this message ( ERROR 144 : RADIO ROM UPDATE ERROR ) all time when i try again with all roms ( old & new & QTEK 9090 ) i have same problem .
plz plz plz help me

Hi all !
Pls, help !
I have the same problem.
When i doing upgrade with offical i-mate_PDA2k_WWE_12200_162_10600_SHIP for my iMate PDA2K (v. 2.06), i have message ( ERROR 114 : RADIO ROM UPDATE ERROR ) all time. And I can't start GetDeviceData (

did you find the solution
Does anyone knows the solution for error 114

Re: did you find the solution
I HAVE TWO O2 NOW
WITH ERROR 114
RADIO
NO SOLUTION
Check boot loader
i have both 1.03

Error 114: radio rom update error
No solution, mainboard replacement is the answer I reckon.

I have exprienced this problem before and all is not lost...
If you are upgrading to a ROM designed for another device/phone network, you will have to follow a set of instructions in order to fix your problems. Go to the wiki pages of this site (http://wiki.xda-developers.com) and follow the links for the blue angel.
If you are upgrading to a ROM designed for your device, after trying to use a ROM from anotherr device, then you will get errors like this as your previous upgrade has possibly changed your country code or Language ID. Again, follow the instructions on the wiki pages of this site (http://wiki.xda-developers.com) and follow the links for the blue angel.
Only after reading the wiki pages, PM me for some more advanced help.
Regards,
Dom

Related

ERROR 114 – RADIO ROM UPDATE ERROR

I have upgraded my i-mate PDA2K with de file (from i-mate web site) BA_CDL_12203_ESN_177_10600_SHIP.exe a few weeks ago and everything went right, but a few days ago I had problems with the phone (I couldn't receive SMS and no GPRS connection could be stablished) and after a warm start, the blue i-mate screen showed "No GSM" instead "R 1.06.00" so I decided to re-install de update file. This second update process stops with "ERROR 114 – RADIO ROM UPDATE ERROR" when it's trying to update the radio ROM. I have tryed to install the last radio rom version (1.10.00) and the previous one (1.02.00) with no success at all, always the same ERROR 114....
If I install only the ExtROM the device comes to life and the phone seems to work but GPRS doesn't work and when I try to upgrade or simply reinstall only the radio ROM I always get the same ERROR 114....
Could anybody help me to fix this error? I would like to upgrade to the latest version and get my PDA up and everything running.
Thanks a lot.
yes please any body say why Error 114 ?
I cant update my IMATE T-MOBULE with USB, I see error 114 in differend percetanges
thx
Popito
1) Have you tried the 1.12 of wiki and have you fixed it with the fix.bat as per getiting started on wiki ?
2) are you saying that the install of the BA_CDL_12203_ESN_177_10600_SHIP.exefails even though you were able to instal it in the past.

PLEASE HELP!!! i need help upgrade to the New Radio 1.13.00

Please i need help to upgrade to the new radio rom. i have a siemens sx66 from cingular. i tried to upgrade it but i always get an error.
Hi aih1977,
Please read the wiki. Cheers ^^
Hi khngaroo
i did but i still get an error
Same issue here
Hi guys,
Actually, I have the same issue. As far as I could see, the Wiki doesn't address the "123: Radio file checksum error" that I receive when following the directions. I follow the directions for using the downloads which doesn't go, then I use the files from the Siemens SX66 Upgrade as suggested.
Any thoughts? Thanks.
ever thought about reading the other threads ?
http://forum.xda-developers.com/viewtopic.php?t=23814
Hum
Lets see the wiki 1.40 upgrade is in the first place a TPYE II upgrade.
Now if you spend sometime and READ the page you will see that there are 2 ways of doing a 1.40 upgrade. One is the whole rom in its type II format the other is just the CE and the radio Type I.
How ever if you don't read the page and think you are got it all worked out then you use the fast option, thats the MA_noID tool (Type II), then download the radio 1.13 which Is a type I but who cares about that any way....then you run the bugger and get a checksum error what the hell have I done now error.
Please correct me if I am wrong so that I can correct the wiki page.
MDAIIIUser,
Yes, I have thought about reading the other threads. What was not obvious to me was that I need to upgrade to the 1.40 ROM to be able to upgrade to the 1.13 Radio. Forgive me if I missed this.
Thanks for pointing this out. I'll start over and review all the 1.40 ROM threads.
lungbutter
You dont need to upgrade to CE 1.40 for the radio 1.13.
Just go to wiki and follow the radio upgrade page. It worked for me and many others.
Now if you want to upgrade to 1.40 then do that also on the wiki page, this will however give you the radio 1.12. (unless you read the whole of the page and understand the getting started section of wiki as in how to use fix.bat)
i tried everything can someone set up the files and link it so i can download it. i think im doing something wrong.
Can you click on the link in my signature?
Arg! Lost my post twice.
Anyhow, MDAIIIUser,
Ok. So the 1.40 ROM is not needed. That was my initial impression. I thought you were referring to reading the 1.40 ROM threads.
I also saw that many users were able to upgrade with no problems. That's why I was suprised when I received the checksum error after reading the 1.13 Radio threads and exactly following the Wiki several times before I gave up. I must have missed something because it seemed like the Wiki steps should've worked no problem.
I haven't found anyone posting that has upgraded the radio on a Siemens SX66 yet. I'm wondering if it's Siemens-related which is why I jumped on aih1977's thread (sorry ).
I'll start over and review the threads and directions, etc.
Thanks for your reponses.
lb
so you are saying that
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
does not work for you as you have a SX66.
This could be due to the fact that your device has no camera and the header of the rom is for a camera.
I have never read about having to fix the header for a radio upgrade, its a first for me but I can learn.
Please confirm
1) By following the link above I get an error
2) the error I get is the following
3) My rom at the moment is.
The new Radio ROM does work on a SX66 if you folloe the directions. If you have an issue use the upgrade files that you used to upgrade 1.40. Your going to get an error the 1st go around but then it will run smoothly the 2nd try.
MDA,
I'm running 1.13.00 radio on my SX66...
-Chris
Dear MDAIIIUser,
Correct me if I am wrong. All this while, from what I've read through the forum, my understanding is that MA_NoID can only be used to upgrade type II ROMs. If so, I must confess that I've upgraded my radio to 1.13 (type I) with MA_NoID... And it worked... Any clue?
Cheers ^^
Ok i just want someone to help me with upgrading the radio and if someone out there upgraded the radio please link it or pm me with the files that you used to do it.
Thank you.
MDAIIIUser,
Okay, I was able to get the radio stack upgraded to 1.12. Here's what I did. I'm sure it's pretty ugly and probably not the easiest way but:
Followed the Wiki again with errors as follows:
After step 7, running BaUpgradeUt I received the "Error 100: Model ID Error".
After step 5 of the second set of instructions, I received: "Error 123: Radio Image File Checksum Error". No joy.
So I then took the iMate 1.40 ROM image and extracted the files, deleted the ms_.nbf and nb_.nbf and ran MaUpgradeUt_noID.exe. It errored with Error 120: Country ID Error. The phone was still in USB mode so I reran MaUpgradeUt_noID.exe again and it successfully updated the Radio to 1.12. I tested the phone calling my voicemal with no problems.
I then replaced version 1.12 with the 1.13 version. I ran BaUpgradeUt.exe and recieved the "Error 123: Radio Image File Checksum Error" (this is using the files from the 1.40 ROM with the 1.13 radio file). I then tried running MaUpgradeUt_noID.exe again. The device software update utility showed no information in the from or to sections of the dialog box. It doesn't throw the phone into USB mode and after a minute or so it offers congratulations thinking it upgraded the phone.
I then went back to the 1.13 Radio files I downloaded and ran MaUpgradeUt_noID.exe. I received the Error 100: Model ID Error".
I reran MaUpgradeUt_noID.exe and received an error that it coundn;t find the ruu.conf file so I renamed the htcruu.conf and htcruu.dll ruu.conf and ruu.dll. I reran it and it would attempt to update the radio, then timeout. I received a communications error (which I didn't record) then tried to soft reset the phone. It was stuck in USB or Serial mode. Cold boot no worky either.
I then reflashed back to 1.12 successfully. I will try to update to 1.13 later tonight or tomorrow.
Here is my phone info. before the update:
Siemens SX66 Cingular
Model No: PH20B1
ROM Date: 01/21/05
Radio Version: 1.02.10
Protocol Version: 1337.35
Ext. ROM Version: 1.33.110 WWE
Thanks for the responses. I'm sure that there's an easier way but I'm happy to be at least 1.12.
lb
Edited: Type on filenames.
God are we having fun.
And Boy am I lost.
This is what I can work out.
You flashed the i-mate rom 1.40 radio 1.12 got errors and re ran it it was fine. Thus you have a 1.40 with radio 1.12
Now you are stuck. you want to flash the radio 1.13 (Type I) using the wiki info and you get error that tells me that you have the wrong device. The file is for a device with a camera you dont have that.
You try the MA_tool which wont work as its for type 2 and gives you a checksum and your stuffed again.
You seem to be the first person that has come up agaisnt this thus we need to upddate wiki with new info.
I have a problem with this as the 1.12 was a type II to Type I convert that I made, nobody had a problem with that before.
So as I asked you to confirm what you have and you have not done that I will ask again.
Please confirm
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
1) By following the link above I get an error
2) the error I get is the following
3) My rom at the moment is.
OK i did everything i just want the files that someone used to successful upgraded there siemens sx66 from cingular to the new radio 1.13 rom. so i can upgrade my siemens sx66.
SO PLLEASE CAN SOMEONE HELP!!!
MDAIIIUser said:
So as I asked you to confirm what you have and you have not done that I will ask again.
Please confirm
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
1) By following the link above I get an error
2) the error I get is the following
3) My rom at the moment is.
Click to expand...
Click to collapse
MDAIIIUser,
Sorry for the confusing post. I wanted to provide some detail. Answers are as follows:
1) Yes.
2) ..."Followed the Wiki again with errors as follows:
After step 7, running BaUpgradeUt I received the "Error 100: Model ID Error". After step 5 of the second set of instructions, I received: "Error 123: Radio Image File Checksum Error".
3) Siemens SX66 Cingular
Model No: PH20B1
ROM version: 1.33.10 WWE
ROM date: 01/21/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version: 1.33.110 WWE
I believe that I don't actually have the 1.40 ROM. From the directory in whcih I decompressed the iMate 1.40 ROM (PDA2k_WWE_14000_176_11200.exe) I removed the ms_nbf and nb_.nbf files and left the radio_.nbf file, which I believe will only flash the radio, then updated.
Is that less confusing?
Thanks,
lb
aih1977,
We are actually trying to determine what the issue may be to update your radio on the SX66. Hang in there!

Stack on bootloader

Hello,
i have a
PDA2K i tried to upgrade it & now it's stack on the boatloader
i tried to upgrade the radio first when i got the message
ERROR 114
then i treid to full upgrade the ROM & Radio
I got the following message
ERROR 120: Country ID ERROR N-N-12-12-12
So what should i do.
Please help.
I never got this, but TRY using the Magician No Country ID upgrade files. You can find them inside the upgrade files for WM5 (I don't know if they're available anywhere else)

CRASH after updating Rom 1.32 to 1.34 !! :(:(

Hello everybody, my name is sebastien and i come from belgium.
I have a problem with my mteor mobile phone. I was one version 1.32 and i tried like everybody to upgrade it on 1.34. Now the phone doesnt work anymore (freezing on the startup screen).
The bootloader is working (power + cam button), but i have different versions of rom upgrade utility on my computer. Only one version works (v3.12.3.0, properties of ROMUpgradeUt.exe). This version of upgrade rom utility came with the 1.34 rom.
The others one give me an 260 Error : Update Error. (crash on "verifying information on your smartphone, please wait").
So i tried the working Upgraderom Utility with all the roms i have (1.13, 1.32 and 1.34) and i have always the same error after 1% updating : 294 invalid vender ID.
I tried to put the firmware on the root of my microSD card (rename BREEIMG.nbh). The bootlaoader checks the firmware ("checking") and then it says "00028002" "Not allow" and then it goes back to the bootloader. I tried this method with the three firmware i've got.
Could you help me please !! Thank you very very much. Sebastien.
Hi
I have a same problem
Hi lacenko!
just put your mteor in bootloader mode
connecto to pc (disable activesync usb connection)
and start the mtty (usb console program) -> infos about in wiki!!
now just use the info command and look what cid you have!!!
after you know that search/ask provider for an update !!!
only this can help!!
after you have the original shipped rom, please upload it to rapidshare and we can link it...
when you have flashed you can reflash with a other newer better rom!!
but theres no way now until you become a rom that matches your cid to flash the phone to working state!

Problem with Installation WM6 on PDA2k

Trying to install WM6 to my I-mate PDA2k:
WM 2003SE
V 4.21.1088 (Build 15045.2.6.0)
Processor Intel(R) PXA263
Memeory125.77 MB
And have error:
ERROR 120 COUNTRY ID ERROR 12-12-38-N-N
The ROM image that you are trying to use is not designed to work with your device.Please check the vender Web Site and download the correct Rom update.
What can it be, and what may i do?
Hi, you can solve the problem following this wizzard http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1_WM2003SE0
Read the wizzard, and all be OK.
Bye
I follow the wizzard but at 5th step I have error:
ERROR 150: ROM UPGRADE UTILITY ERROR
This ROM Upgrade Utility does not design for your device.
Please get proper ROM Upgrade Utility and try again.
I use the HELMI_BA_WM6_R0. It's right?
Hi, I have the PDA2k, and I upgrade it susccesfully, wihtout any problem (I didn´t extend the rom). I used the version of the main thread,but I don`t remeber exactly wich mirror I used, so I load it to another mirror http://www.megaupload.com/es/?d=MTB3PIRQ . (I didn´t modify anything, is the same version of the thread, this is only another mirror, but is wich I used to upgrade)
I hope this can help you.
Bye
Er_Garry
Thank's a lot!
That's amazing but it work!!!
maschin said:
Trying to install WM6 to my I-mate PDA2k:
WM 2003SE
V 4.21.1088 (Build 15045.2.6.0)
Processor Intel(R) PXA263
Memeory125.77 MB
And have error:
ERROR 120 COUNTRY ID ERROR 12-12-38-N-N
The ROM image that you are trying to use is not designed to work with your device.Please check the vender Web Site and download the correct Rom update.
What can it be, and what may i do?
Click to expand...
Click to collapse
Here is it :
http://forum.xda-developers.com/showthread.php?t=326532&page=53
Bye

Categories

Resources