Problem with Installation WM6 on PDA2k - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Trying to install WM6 to my I-mate PDA2k:
WM 2003SE
V 4.21.1088 (Build 15045.2.6.0)
Processor Intel(R) PXA263
Memeory125.77 MB
And have error:
ERROR 120 COUNTRY ID ERROR 12-12-38-N-N
The ROM image that you are trying to use is not designed to work with your device.Please check the vender Web Site and download the correct Rom update.
What can it be, and what may i do?

Hi, you can solve the problem following this wizzard http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1_WM2003SE0
Read the wizzard, and all be OK.
Bye

I follow the wizzard but at 5th step I have error:
ERROR 150: ROM UPGRADE UTILITY ERROR
This ROM Upgrade Utility does not design for your device.
Please get proper ROM Upgrade Utility and try again.
I use the HELMI_BA_WM6_R0. It's right?

Hi, I have the PDA2k, and I upgrade it susccesfully, wihtout any problem (I didn´t extend the rom). I used the version of the main thread,but I don`t remeber exactly wich mirror I used, so I load it to another mirror http://www.megaupload.com/es/?d=MTB3PIRQ . (I didn´t modify anything, is the same version of the thread, this is only another mirror, but is wich I used to upgrade)
I hope this can help you.
Bye

Er_Garry
Thank's a lot!
That's amazing but it work!!!

maschin said:
Trying to install WM6 to my I-mate PDA2k:
WM 2003SE
V 4.21.1088 (Build 15045.2.6.0)
Processor Intel(R) PXA263
Memeory125.77 MB
And have error:
ERROR 120 COUNTRY ID ERROR 12-12-38-N-N
The ROM image that you are trying to use is not designed to work with your device.Please check the vender Web Site and download the correct Rom update.
What can it be, and what may i do?
Click to expand...
Click to collapse
Here is it :
http://forum.xda-developers.com/showthread.php?t=326532&page=53
Bye

Related

ERROR 144 : RADIO ROM UPDATE ERROR

Hi There !!
When i doing upgrade for my imate PDA2K i have this message ( ERROR 144 : RADIO ROM UPDATE ERROR ) all time when i try again with all roms ( old & new & QTEK 9090 ) i have same problem .
plz plz plz help me
Hi all !
Pls, help !
I have the same problem.
When i doing upgrade with offical i-mate_PDA2k_WWE_12200_162_10600_SHIP for my iMate PDA2K (v. 2.06), i have message ( ERROR 114 : RADIO ROM UPDATE ERROR ) all time. And I can't start GetDeviceData (
did you find the solution
Does anyone knows the solution for error 114
Re: did you find the solution
I HAVE TWO O2 NOW
WITH ERROR 114
RADIO
NO SOLUTION
Check boot loader
i have both 1.03
Error 114: radio rom update error
No solution, mainboard replacement is the answer I reckon.
I have exprienced this problem before and all is not lost...
If you are upgrading to a ROM designed for another device/phone network, you will have to follow a set of instructions in order to fix your problems. Go to the wiki pages of this site (http://wiki.xda-developers.com) and follow the links for the blue angel.
If you are upgrading to a ROM designed for your device, after trying to use a ROM from anotherr device, then you will get errors like this as your previous upgrade has possibly changed your country code or Language ID. Again, follow the instructions on the wiki pages of this site (http://wiki.xda-developers.com) and follow the links for the blue angel.
Only after reading the wiki pages, PM me for some more advanced help.
Regards,
Dom

Qtek 9090 Rom Update 1.40.154 German found

Hi all,
we found the update for a Qtek 9090. Here for any who need it to:
http://www.xtrem.cc/html/hochzeitsvideo/qtek9090/BA_DT_GER_14001_154_11200_Ship.exe
greets
werner
http://www.xtrem.cc
http://www.sfx-team.com
http://www.hochzeitsfilm-hochzeitsvideo.com
dead link
please upload to the FTP.
dead link
try this ...
http://www.xtrem.cc/hochzeitsvideo/qtek9090/BA_DT_GER_14001_154_11200_Ship.exe
Cheers,
Hawk
Hochzeitsvideo ??? :lol: :lol:
However, I tried last night to make my XDAIII work with the 1.40.01 ROM, but no way to upgrad that ****. I read something about to use instead of the "BaUpgrade..." the "MaUpgrad..._noID.exe" because sometimes we got some problems with "Country ID Error". I supposed to use the MaUpgrade exe-File with the 1.40.01 ROM Update, the proggi ask me if I want to upgrad from 1.31 to 1.40 ROM vers. and Radio from 1.10 to 1.13 - click OK. done. XDA screen's backlight flashed off and "USB" stands at the top and the Version at the bottom. Ok... after a few sec. the update proggi said: ERROR 120: Model ID Error .... your device isn't designed to work with this patch.
I don't know what tha hell 's goin' on with that thing. Because many other guys in our forum already done this.
do the flash in 3 steps
1) 1.40.1 CE
2) Radio following wiki.
3) Flush the extrom
The 1.40.1 is a type II rom and the radio is a Type I.
Make sure you only use the files that are posted and dont mix them around.
You also might be having problems as your device has a differernt Version Number (that is if you have a camera) thus you need the MA tool.
Hi,
I've done it yesterday night/today morning. I downloaded the vodafone VPAIII update and the Maupdate, extracted the exe to folder and packed the maupgrade in it. started maupgrade "ERROR 120: Country ID Error", aight, "EXIT" started program once more, works ! Great, now I have the 1.40.01 GER ROM and the 1.13 RAdio Version.
And a fully Vodafone branded o2 XDAIII :lol: :lol:
I'll de-brand it today night and install some of the o2 CAB's. But at the moment I'm thinkin' to installe magneto - not sure because of the per4mance probl. :roll:
thx !

Pls help - XDA & Error 100 (Upgrading to WM5)

Hi,
i was using xda 2s, with WM5 (old-build) and several months ago, unaware followed this link:
http://forum.xda-developers.com/showthread.php?t=274505
somehow, i've managed downgrade to WM2003SE again,
using this link:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
(ROM: 1.40.00 WWE
ROM date : 03/10/05
Radio: 1.12.00
Protocol ver: 1337.42
ExtRom: -blank-).
running this version the Bluetooth cannot run, 'license expire'.
Later, I want to try the new ROM (looking for the one with direct push-mail feature) of HELMI in this link:
http://wiki.xda-developers.com/index.php?pagename=Helmi.
When running BAupgrade, received error:
Error 100: Model ID Error 25-N-10-N-N
("the ROM image that you are trying to use is not designed to work with your divice. please check the vender web site and download the correct ROM update")
then tried to run with MaUpgrade, it seem work, but no upgrade at all.
Somebody pls help..
Thank you very much.
u need to use MaUpgrade_NoID instead. it should be on the wiki website somewhere.
also remove the SD card from the slot before doing the upgrading.
Unfortunetely, MaUpgrade_NoID did not work..no upgrade at all..
is it normal if 'Ext ROM : -(blank)-'?
from Start - Settings - System - Device Info
thank-u

Help XDA2s CID preventing me from upgrading with official rom

Hi recently aquired an XDA2s from a friend. However, the firmware has been modified. Would like to restore it back to the original firmware as the SDIO card is not functional. Used the Official ROM, but gave a Country ID error with my device and refused to upgrade.
Have done some homework read the instructions as shown on this link.
http://forum.xda-developers.com/showthread.php?t=228852.
However, i am stuck halfway. Here is my Devicetype.txt file description. Only managed to get the Devicetype as PH20B, Language ID = WWE. The rest of the info I can't really make out.
Also, when i use the file : xda2nbftool -t -x,
it gave a warning for ms_.nbf
The rest of the files such as nk.nba and radio.nbf were ignored. See pic.
How do i get the rest of the hex addresses for the radio and nk files ?
Could someone help to generate the final nbf files for me or help advise ?
The Official ROM file versions are here :
English ROM
ROM: 1.40.00 WWE
Date: 03/10/05
Radio: 1.12.00
Protocol: 1337.42
ExtROM: 1.40.923 WWE
MMS: 2.0.0.21
BT: 1.0.0 Build 3900
Can anyone help ?
More information on my existing XDA2s firmware :
ROM Version : 5.04.09.WWE
ROM Date : 11/02/06
Radio Version : 1.15.00
Protocol Version : 1337.45
ExtROM Version : (Left Blank)
Never really heard of ROM Version 5.04.09.WWE. And SDIO Card is not detected. Would like to downgrade to the official ROM as i suspect that the SDIO Drivers are not installed in the existing ROM.
Also, i tried using XDAtools\OSimagetool to copy another XDA2s firmware to this XDA2s. But it failed to write generating an error in the pic. Status of Activesync is connected.
mtnbikefreak said:
Hi recently aquired an XDA2s from a friend. However, the firmware has been modified. Would like to restore it back to the original firmware as the SDIO card is not functional. Used the Official ROM, but gave a Country ID error with my device and refused to upgrade.
Have done some homework read the instructions as shown on this link.
http://forum.xda-developers.com/showthread.php?t=228852.
Click to expand...
Click to collapse
I'm afraid you have read the wrong homework. Those directions are for the Himalaya & Andes, not the angel.
What OS is on the phone now? That will help point to the correct directions needed to reflash the phone.
Flashing to 2003 from WM5 or 6 will vary depending on if the extended ROM has been resized, etc.
Check the angel getting started in the wiki (It's working now)
http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted
Oh ... thanks for pointing that out. To answer more questions :
It's running on a generic Windows mobile 5.0. I have a feeling that the Ext rom is already corrupted as the gsm portion of the phone is not functioning properly. I'll do a readup and revert my results. Thanks.
here's the thing. if you have a problem with the CID... all you have to do is find the exe file here named MAUpgradeUt_NoId.exe... use that instead of the exe provided in your Official Rom, i guess that would be WM2003se you are installing.
afaik, extrom havent have a thing to do with the GSM.
Thanks for the reply.
Thing now is that i am trying to downgrade from wm2005 to wm2003 (o2 official asian rom v1.42) But then looks like i am trying in vain.
Tried to do what is in the directions for wm2005->wm2003 by setting it to bootloader mode, doing a hardreset and using maupgrade_no_id with the official nk.nbf
But then it hangs while the check is being done. The xda2s screen shows v2.08 and serial. It changes to usb once the usb cable is plugged in.
Is there any other method i can do to downgrade it ?

Update Problem !

Hi
I ve just bought a second HTC rhodium, my first Rhodium was broken
It's a used one in SPA Lang.
I decided to isntalla the Official FRA ROM, but i had that errror [294] : INVALID VENDER ID
This Update Utility cannot be used for your PDA Phone. Please check your Update Utility
I tried also the European version of the official rom, the same problem.
I tried to install the ROM also using a memory card but i had this error: not allow
I Tried to install the HARD SPL also,but it tells me that I have already HarSPL on device before !! (Commercial error).
Please Help
Thanks
You can't install updates not made for your particular device, even if they're official, unless you have HardSPL. Explain how you had to get your device replaced (in this thread) and you should hopefully get another HardSPL license from cmonex and olipro.

Categories

Resources