Newbie: is it possible to put an 02 ROM onto a QTek? - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hello;
I'm new here but have spent a lot of time reading through the groups. I was foolish the other week and tried to put the new 02 ROM on, which has the Blackberry Connect software. It trashed me QTek so I had to download the latest "Belgian" ROM to fix it.
However, I really would like to test the Blackberry Connect Application, I have read up on that and have found many inconclusive answers!
It's all very confusing, and I'm sure I'll grasp it soon...so yeah, can I put the new 02 XDAIIs rom on my QTek 9090? Is this what cooking is? I tried the german T-Mobile software and that didn't work...please help!

Related

Rom Question

Sorry for asking such fundamental questions but i am new to this site...
I have a Orange SPV M2000 (Blue Angel)
Can I ugrade the rom on this, what will the upgraded rom give me that i dont already have and how do i do this ?
I have looked at the rom pages and can not seam to find an Orange rom, does this matter ?
Sorry if these are basic questions, thank you for your time.
I also have a m2000, was wondering if it would be ok to install the new 1.4 asia O2 rom???
Mainly want it for WMP10 due to the streaming video etc.
Have red some mixed reports about the new rom, is it actually better than 1.31???
ive upgraded my m2000 using the wiki
im basically running the imate roms as im unsure on how to play with the extended rom.
everything went fine without a hitch!
I have an orange SPV M2000, I have successfully upgraded to Rom 1.40 with Radio Rom 1.13
I am a bit of an old hand doing this as i have had a pocket pc since the inception of a ipaq 3630 many moons ago.
What you ask do you get with the updates? well the main reason for upgrading is the increased reliability. far less soft reboots due to lockups.
and a nicer interface with WM10 especially since i have a media center PC and i can automatically synch my recorded TV to the device
anyone needs help with upgrade you can msn me at stuart b ***NOSPAM***@broadbandtap.co.uk
I can't download MaUpgradeUt_noID.ZIP ?????
HELP?

A few 'noob' questions...

OK, I'm waiting on my XDA IIs (Blue Angel) arriving tomorrow and have a few questions before I dive right in!
(Before I go any further please note that I have spent the last few days delving into the forum and wiki on this site but just need some clarification.)
1. Can I rebrand an O2 XDA IIs to Vodafone VPx/VP 1620 (i.e change ROMs)?
2. If yes, how, and if not can I use all my Vodafone service (GPRS etc) on an O2 braded phone?
3. I have the latest ROM downloaded from O2 just in case mine needs it on arrival, will this enable the pairing to two BT devices (Headset/GPS) or will I need to update the BT stack as per the other 3500/3900 thread?
4. Can I expect any issues with Tomtom 5, or should this work OK if I don't start playing with the ROMs too much!
Thanks in advance for any advice, and I'm looking forward to trying WM5 once I pluck up the courage
Moved to BA section from general
1) Your rom has 3 parts (which you know since you read wiki) the branding is in the extrom. You want the phone to act like a BA from a different carrier then use that extrom.
2) By reading 1 and reading cooking in the extrom kitchen on wiki
3) Bt is a mess and part of the CE rom, if you have the latest rom you will have the latest BT Stack. As for pairing well have fun. There is enough info on the site to confuse you.
4) Tom Tom works on a BA as per there site.
Thanks for that... I think
So, CE ROM as standard, use Voda ExtROM for their branding, and hope for the best with BT
Sound about right?
Better get into the 'kitchen' then, eh!

new 8125. what to do?

i looked and looked for hours on end, for a few days now, reading posts and looking for answers/ideas. in most of the posts i got confused and overwhelmed by the differentiating opinions/advice/ideas/ and results from various members on a cartain topic or post. i dont even know what is okay to do not to do, use or not use, how to or how not to do anything anymore. im really looking for help on how to, what to, and suggestions. any help that could be given would be greatly appreciated, i hoped this site had a tutorial sections but unfortunately it doesnt unless i didnt look hard enough. thanx again to everyone for reading adn helping if they do. Thank you. I have a cingular 8125 that is carrier unlocked.
Lookin for help with:
what is the best rom to upgrade to and exactly how do it.
-what does upgrading the rom do for the wizard?
- what needs to be done to Wizard before upgrading.
hot to cid unlock the Wizard.
neccessary programs/software for the Wizard
where to find the programs
suggested programs/software for the Wizard.
where to find programs
What are some considered neccessary tweaks for the Wizard.
What do they do. ex-Wi-fi
what to do/ what never to do with Wizard
- ex. never let batter completely die
how to fully customize os
what programs or skins/themes to use.
akamavrik1012 said:
hey, thanx for takin a look. im new to posting and this site and forums in general. i dont know what im about to ask if its Ok or not. if its not, i know im going to get scolded for it, but plz just let me know how to go about it for future ref. im probably going to be asking questions that can be found throughout the site f i just looked. i looked and looked for hours on end, for a few days now, reading posts and looking for answers/ideas. in most of the posts i got confused and overwhelmed by the differentiating opinions/advice/ideas/ and results from various members on a cartain topic or post. i dont even know what is okay to do not to do, use or not use, how to or how not to do anything anymore. i just got a cingular 8125. though i am not new to windows mobile cuz ive been a heavy user or mpx200 then the mpx220 and great on a regular windows os, i didnt want to take any chances with the 8125. i dont want to install something or mess up or miss a process of installing a file or program and my 8125 is gone just as quick as i got it ot anything.one of my purposes is to leave my laptop at home when i travel or just goin round. though i am a college student, not a business man, im big on having convienience when i need it for work, or for personal use. im really looking for help on how to, what to, and suggestions. any help that could be given would be greatly appreciated, i hoped this site had a tutorial sections but unfortunately it doesnt unless i didnt look hard enough. thanx again to everyone for reading adn helping if they do. Thank you. I have a cingular 8125 that is carrier unlocked.
Lookin for help with:
what is the best rom to upgrade to and exactly how do it.
-what does upgrading the rom do for the wizard?
- what needs to be done to Wizard before upgrading.
hot to cid unlock the Wizard.
neccessary programs/software for the Wizard
where to find the programs
suggested programs/software for the Wizard.
where to find programs
What are some considered neccessary tweaks for the Wizard.
What do they do. ex-Wi-fi
what to do/ what never to do with Wizard
- ex. never let batter completely die
how to fully customize os
what programs or skins/themes to use.
Click to expand...
Click to collapse
Welcome, friend.
First, I have to admit that I have ADD, and couldn't summon the attention to read your entire post.
I do however think that what you are looking for you can find by browsing and searching these, as well as the Cingular HoFo forums.
When you say your 8125 is "carrier unlocked", do you mean SIM unlocked? If so, that's just swell, but won't allow you to install any ROMs that didn't come from Cingular. You need to CID unlock to install custom ROMs. (Tip: search for "CID unlock")
Start by reading through several pages in the plain 'ol "Wizard" forum (the forum you're in now is the Wizard upgrading forum) - you'll find lots of useability discussions in there. HoFo is good for that as well.
In the future, if you find features of some of the custom ROMs desireable, you'll need to have your device CID unlocked, and you'll have to run a program on your PC that flashes your device. When you get to that point, post a message and I or any of the other fine folks around here will help you. Be sure that you've done all the reading you can stand first though.
Here's a basic primer on some of the terms you'll see around here:
CID lock: carrier ID lock - restricts device to ROMs from originating carrier
SIM lock: locks a device to the originating carrier's SIM cards
Extended ROM: a portion of storage on a device used to store customization files
radio ROM: the code on the device that interfaces with the xmit/recv hardware
AKU: Adaptation Kit Update - essentially a service pack for Windows Mobile. These can add fixes and/or features. AKU 2.0 and above includes Direct Push
Direct Push: push mail/calendar/contacts - like Blackberry. Used with Exchange server SP2, this will push new items to your device as they arrive or are changed.
Sleep: what I should be doingzzzzz
If you're new to the Wizard and trying to pick a ROM to try, I'd suggest one of the following based on your carrier:
T-Mobile US - Download one of Xelencin's ROMs
Cingular - You want one of Summiter's creations
If you are overseas and use a different carrier, or just want a barebones ROM to customize the way you see fit, grab Mr. Clean.
Since you say you've got an 8125, I'm guessing that you're on Cingular in the US. In that case, stick with Summiter's latest as it will be a plug-and-play solution for you.
Ultimate Wizard setup
Hi There
WOW my first post on this forum. I guess there always has to be a first.
I bought my Wizard recently and the first thing I did was look at the following post
http://forum.xda-developers.com/viewtopic.php?t=53784&highlight=edge
It contains a large amount of really cool info on setup of your wizard. I didn't follow it exactly as some things may be out of date, for example the ROM image he says is the latest is 1.6 I think but I downloaded 2.x from the Imate website (mine is an Imate device bought in South Africa)
Anyway, I hope the above post helps you, it certainly did me.
Re: Ultimate Wizard setup
goodbyte said:
Hi There
WOW my first post on this forum. I guess there always has to be a first.
I bought my Wizard recently and the first thing I did was look at the following post
http://forum.xda-developers.com/viewtopic.php?t=53784&highlight=edge
It contains a large amount of really cool info on setup of your wizard. I didn't follow it exactly as some things may be out of date, for example the ROM image he says is the latest is 1.6 I think but I downloaded 2.x from the Imate website (mine is an Imate device bought in South Africa)
Anyway, I hope the above post helps you, it certainly did me.
Click to expand...
Click to collapse
A post worthy of a sticky if I have EVER seen one!!!!

Dutch rom upgrades & Touch flo question

I recently brought a Qtek 9100 (not new) and am completely chuffed to bits with it. After spending a lot of time in these forums getting to grips with the techno jargon, I decided it was high time and take the plunge into customizing my friendly 9100.
My phone is NL based, and I have found it exceedingly hard to find an NL WM6 update to upgrade from my WM5. Worst to come is that I would like to put touch flo on, but so far have not found an NL update. I know they do exist, but the few download links I have tried here for some NL files appear to be dead or send up pages of advertising.
If anybody has any info or direct links for my needs please don’t hesitate to send them. For me the Qtek 9100 is an amazing device, which I have setup as a document management system and shall never stop to amaze me concerning it versatility.
Thrak

Help Improve My XDA2i and Wi-Fi Problem

Hi
I havent performed any upgrades to my XDA2i (official or otherwise) for at least 3 years - are there any upgrades I should consider?
Here is my Device Info
ROM Version : 1.11.00 WWE
ROM Date : 01/27/05
Radio Version : 1.00.00
Protocol Version : 1337.39
ExtROM Version : [THIS IS BLANK]
Model Number : PH10C
Also, I am unable to connect to WiFi with my XDAIIi
The device finds wifi signals and sometimes will make a connection - but when I try and open a webpage I get a screen showing "IIS7" and nothing else.
Here are my settings for WiFi :
Network Card Connects to tiacxwin Campatible Wireless Ethernet (for both The Internet and Work).
Power Save slider is set for Best Performance.
Thanks for any help and advice !!!
Paul
I am in a similar position Paul.
I have been given a 02 XDAll by my company to use for recording surveys.
Its bog standard like yours.
I'd really like to upgrade it but the problem is there is almost too much written about it on these forums .Most of it is so old and out of date that all the links are broken. Its hard work trawling through it.
What is needed is a simple basic upgrading overview listing all the options but I suppose everyone has moved on to more recent PDA's and are no longer interested in these
I've posted a similar request in the Himilayer section .Maybe we can share what we find
Nick
Nick, do you have a Himalaya or an Alpine? PH10B or PH10C?
The Alpine is stuck on WM2003, perfectly good for its task just not upgradeable to WM5 or WM6.
As for customising it realy depends what you are looking for.
Hi DeeDee thank you for responding. I feel guilty hyjacking Paul's thread.
Mine is a Himalaya 10B
with following spec
02 XDAll
2Gb SD card
Rom 1.72.00WWE
Date03/15/04
Radio 1.17.04
ext Rom 1.72.18.1
Ram 128Mb
Model PH10B
I just wanted to improve the Active page if its possible .I cannot read the tiny text so large button icons like the Diamond would be useful
I cannot set the Internet access up either ? have tried for hours.
I have a Netgear Wireless Modem router DG834G but neither the manual or quick guide explain how to set up the XDA .
I have spent several days trawling this site and the net.
Any help appreciated thank you
Nick,
No problem joining in - if we can get the WiFi problem sorted I would be more than happy.
DeeDee,
Should my ExtROM Version be completely blank?
Thanks
Paul
Hi Paul
you're up early !
I have used WM5 on an XDA Mini S (Wizard) a couple of years ago. I imagine that most of the current software and apps are written for WM5 orWM6 so it will mean I'll need to upgrade to WM6. Presume that means flashing the Rom which judging by the number of disasters on this forum is not something I'd do lightly.
Particularly as there are virtually no answers to requests for help.
I found a statement last night that basically says unless you are a software developer you arn't welcome on this forum which probably explains the lack of help.
Yours has the 128 Rom as apposed to my 64Mb which is a big advantage. I have gone off the idea of buying a Himalaya or an Alpine as they are too antiquated really which is a shame as I love the build quality and screen size.
I'm going to look for something a bit more contemporary I think . In the mean time I'll enjoy using the works XDA ll
Hi
Flashing the Himalaya to WM5 or WM6 is painless and it has to be said slightly addictive, you will try many ROMs until you find one you like. Think I have tried most of the ROMs for the Himalaya.
The lack of help has NOTHING to do with not being a developer, i'm not one and have had lots of help. The problem is probably due to the lack of people using these PPCs. i have to confess my Himalaya is purely there as something to muck about with, work didn't want it any more. i have a Trinity as primary PPC phone and an Alpine with an application that doesn't work on WM5.
You won't get your Himalaya to connect to your WiFi as it doesn't do WiFi without an add on card.
DeeDee,
Should my (Alpine) ExtROM Version be completely blank?
Thanks
Paul
Hi Paul
Can't remember and my Alpine is at home, but i don't think so.
deedee said:
Hi
Flashing the Himalaya to WM5 or WM6 is painless and it has to be said slightly addictive, you will try many ROMs until you find one you like. Think I have tried most of the ROMs for the Himalaya.
The lack of help has NOTHING to do with not being a developer, i'm not one and have had lots of help. The problem is probably due to the lack of people using these PPCs. i have to confess my Himalaya is purely there as something to muck about with, work didn't want it any more. i have a Trinity as primary PPC phone and an Alpine with an application that doesn't work on WM5.
You won't get your Himalaya to connect to your WiFi as it doesn't do WiFi without an add on card.
Click to expand...
Click to collapse
Thankyou DeeDee I appreciate you taking the trouble to answer silly questions by a noob.
I have downloaded and printed out a 140 page manual and there was nothing clear about connecting to wi-fi
If I have to carry this Hima around with me all day I might as well have it working as well as it can.I had intended to purchase a 3g Iphone for myself but now I'm not so sure I might buy a HTC instead if I can find one with 3.5" screen and wi-fi and a reasonable interface like touchflo
Nick
i have to say the smaller screen on my Trinity is perfectly adequate and that the larger form factor of the Alpine/Himalaya means you need a headset/handsfree kit to really use it as a phone.
It's also not pocketable, which my Trinity is, just.
If you can find a decent mobile shop and have a touchy feely sesion with as many as you can.
thanks DeeDee thats excellent advice. Photos never give a good indication of size and ease of use . The size is a bind like you say its heavy and too big for a shirt pocket but it is easier for me to work with using reading glasses.
I got an 02 XDA mini S when they first came out. I found the screen too small and fiddly and it stayed in the box unused for 18 months when I sold it on ebay for nothing so I have learnt my lesson.
DeeDee may I just ask one other question please. I have trawled through the wiki and various other sources but I still haven'y founf an answer to my initial question on the Himalaya board.
Q1 How do you install a new app on the Hima or Alpine ?
Q2. where does it get installed to ?
Today we lost the special survey App again Grrrrrrrrrrrv because the flippin battery went flat.
My boss is hopping mad and blames me !....I blame IT cos they installed it.
There must be somewhere we can install an App to that is non volatile and is not lost every time the battery goes flat.
Presumably the same place that WM2003 is installed ? How is it done ?
To install an app either:
1 - use Active Sync to install it if necessary
2 - if the install is a CAB file copy it to a memory card and then click it on the PPC to run the install.
As for the where it installs, when you run the installer it may ask where you wish to install, either Device/Storage Card. Make sure both batteries are charging. In all honesty it's not your fault that the end users aren't charging their Alpine on a regular basis.

Categories

Resources