Related
I tried to upgrade my Qtek 9090 an failed.
At first i seemed to work. But then it stopped and said "connection error".
When I now boot my 9090 I only see a dark screen.
You can see "USB v2.06" in the background.
I have tried to upgrade again but with no good result.
Please help me!
I have searched about my problem.
It looks like my Qtek is stuck in "bootloader" mode.
To solve this it looks like I must get it to a repair shop?
Or I can get an external boot rom in to an SD-Card and insert in my Qtek.
Correct me if I am wrong.
So. How do I move on?
What file do have have to use?
Should the CD-Card be in the Qtek or kan I use en extarnat SD-Card writer from my PC?
I have the program Multi-port/USB TTY.
Please help me!
Looks like I fixed it my self.
I got an idea from another i this forum.
He told me to try upgrading again on a Computer wich have USB 2.0.
My computer have USB 2.0 and that did not work so I looked futher in to my trouble.
I took my girlfriends computer (AMD400mhz, Win98, USB1.1) and tried upgrading on that. Lucky for me the upgrade program found my Qtek 9090. But when upgradeing I got an error on my extended rom upgrade.
I tried again but exluding the exended rom file when upgrading and now it works.
I still would like to upgrade my Qtek with this rom file BA_WWE_BP_12200_169_10602_SHIP.zip but I will not do this unless I am shure this works.
Thanks the people who have tried to help me.
My Qtek now have the following versions:
ROM 1.22.00 WWE
ExtROM 1.22.126 WWE
Radio 1.06.00
Hello,
I seem to be having a weird error when I try to unlock the ext rom or unhide it. I can see the folder in my programs folder, but when I click on unhide, nothing happens and when I click on unlock I get a debug error which says "FL_IOCTL_BDTL_HW_PROTECTION - The parameter is incorrect" . I dont know why it keeps doing it. I have tried to upgrade to the latest rom version but after getting in the bootloader mode, in the utility screen it does not show me the new version of the rom, the only thing it shows me is that my device will be upgraded to 5.3.2, which is what i currently have.
Any idea why its doing what its doing?????
Thanks,
Sam
sameer25 said:
Hello,
I seem to be having a weird error when I try to unlock the ext rom or unhide it. I can see the folder in my programs folder, but when I click on unhide, nothing happens and when I click on unlock I get a debug error which says "FL_IOCTL_BDTL_HW_PROTECTION - The parameter is incorrect" . I dont know why it keeps doing it. I have tried to upgrade to the latest rom version but after getting in the bootloader mode, in the utility screen it does not show me the new version of the rom, the only thing it shows me is that my device will be upgraded to 5.3.2, which is what i currently have.
Any idea why its doing what its doing?????
Thanks,
Sam
Click to expand...
Click to collapse
If I remember correctly, Extended ROM unlocker is not working under WM5.
Not able to upgrade to 5.1.1700
As you say aybe the unlocker does not work with WM5, so I downgraded to the original factory version of 1.42. At this point the unlocker worked fine. So I tried to upgrade it to the latest version of 5.1.1700, but as soon as the utility screen comes up, it shows me that my rom will be upgraded to 5.03.02 which is what i have had all this while. So I upgraded it back to the same version and just upgraded to the latest radio version. When I try to use the unlocker again in this 5.03.02 version I still get that same error.
Can anyone please help me to upgrade to the latest rom version 5.1.1700 and tell me what this error means.
Thanks in advance,
Sam
Re: Not able to upgrade to 5.1.1700
sameer25 said:
As you say aybe the unlocker does not work with WM5, so I downgraded to the original factory version of 1.42. At this point the unlocker worked fine. So I tried to upgrade it to the latest version of 5.1.1700, but as soon as the utility screen comes up, it shows me that my rom will be upgraded to 5.03.02 which is what i have had all this while. So I upgraded it back to the same version and just upgraded to the latest radio version. When I try to use the unlocker again in this 5.03.02 version I still get that same error.
Can anyone please help me to upgrade to the latest rom version 5.1.1700 and tell me what this error means.
Thanks in advance,
Sam
Click to expand...
Click to collapse
I think we have a slight misunderstanding here. 5.03.02 and 5.1.1700, here are exactly the same. 5.03.02 is the ROM version, while 5.1.1700 is the OS version of the ROM. So 5.03.02 IS 5.1.1700 actually.
So, one prob solved, how about this one....
First of all, thank you KTamas for helping me out on this one and clearing out this problem of Rom versions.
I have another question though, what is this wizard rom? and how different is it from the one that I just installed? I was trying to install the wizard rom before I installed the one that I have right now, but got stuck in the middle when I had to create the EXTROM folder and transfer the contents after editing the edit.bat file. I was not able to transfer the getdeviceid.txt file from my phone to my pc for some odd reason and so was not able to do much on that.
Can you please help me?
Thanks,
Sameer
Good time of the day!
I have Orange SPV M2000 France. I received it without radio ROM. OK. I tryed update radio rom to new one from shipped packed (downloaded form this FTP). Device writes Radio ROM Update Error.
OK. I readed all posts about fixing this problem. Now I have not working Bluetooth (License Expired BDA 00:00:00:00:00:00) and no Radio ROM.
Also, sometime, it writes in Model ID filed not PH20B but random chars.
Bootloader version 2.07.
Have any idea how to repair this device?
May be flash it from SD card (but how create it and where I can found images for write to SD card?).
Thank you very mutch.
P.S. All other stuff works fine (I mean that this device works fine as PDA, but no Phone and, now, no Bluetooth).
Help, please.
try to upgrade radio rom using maupgradeut_noid.exe
xplode said:
try to upgrade radio rom using maupgradeut_noid.exe
Click to expand...
Click to collapse
Yes. I tryed. As I said I tryed all solutions from forum. No result. It freez on 0% when I use _NoID.
Any idea?
mtty
have you tryed this?
one of the commands cleans your storage, so do a backup first
Thank you. But yes. I tryed it too.
No result.
I think I need full flash for this device.
Sorry, guys. But have you any ideas how to repair my device?
May be somebody can dowload full-flesh from devices and upload it on FTP?
Have you gone through this page and if so what errors did you get and when.
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
Yes. I did.
If I use Type II it reports Radio Update Error at 0%.
If I use Type I it freeze on 0% without reporting error.
If I use original (not NoID) then it reports CountryID error even [CHECKCEID_TYPE]=1 in .ini file.
Well I know for a fact that one user had a real painful radion install.
In the long run ir was a USB issue on his dektop.
I would try a different pc and follow wiki, dont mix your files TYPE I needs the type one update files and the fix.bat.
Type II the no_id
If you mix them it wont work.
Coutnry ID error is solved with Type II and No_id
OK. Thank you. I will try on second PC today.
OK. I tryed last solution. Same result. Radio update error.
I am really sorry. But anybody have solution?
Hi all,
I tried to upgrade my MDA compact II (HTC Charmer) to WM6, but during the first step, downgrading to the "no vendor" version I made a mistake. A used a wrong version, it was for Prophet. After the final reboot, the device froze in the splashscreen "T-Mobile". After that I tried to do exactly the same with a "Charmer" version, but it didn't help me, the situation was the same.
However, now I'm able to flash successfully only the last vendor provided ROM update "RUU_Compact_ll_2060227_20602110_021921_T-MobileUK_Ship.exe", but it doesn't help me anyway, my Charmer is still freezing in the splashscreen. I tried to downgrade it , but the application gives the following error: "UPGRADE ONLY". When I try to make a hard-reset, and after that to confirm the factory settings by pressing "Yes" (green) button, the result is "Format FAT partition" and then "format is failed".
Only the bootloader is working now as well as the battery charging. Please, help me to turn back to the life my Charmer!
And one additional question: can I perform a CID unlocking just by ROM-flashing or the device must be fully operable?
Flash this:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
After that, you should be able to make hard reset. If you succeed, flash "RUU_Compact_ll_2060227_20602110_021921_T-MobileUK_Ship.exe" - that.
Hello there,
I am a new use an recently got an MDA PM200. I am in exactly the same situation as petrun. I have tried the flash suggested by vlodeck but it doesn't work, saying incorrect vendor ID (I guess that's because it's for a Prophet?).
What should I do next...?
Thanks.
OK, I succeed with a little progress. Many thanks to vlodeck, I will try to explain what happend...
I successfully flashed my Charmer with this Prophet ROM:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
Full link:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
But it was possible only by using this "No ID" update application, not original one, maybe because my device is still locked:
Full link:
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
After that I succeed to format the FAT partition (finally ). But I cannot after all to flash the latest official MDA compact II firmware. There is two possible events, which I experienced:
1. When I try to use the original flashing application, I get the following response: "UPGRADE ONLY".
2. When I try to flash the official MDA compact II ROM, but through the "No ID" application, I get "INVALID COMMAND".
Just for explication, now my device cannot boot, it freezes in the splashscreen (it is Qtek now, not T_Mobile...) and the following versions could be read:
IPL 2.06
SPL 2.20.0000
GSM 02.47.21
OS 2.20.7.34
So, how I can do that? What should I do further? I would like to unlock my Charmer, but should I firstly make it operable?
Thanks in advance for your help, guys!
By the way, all described above I tried sevetal times with the same result.
The other thing is that... all links about the CID unlocking downloads, which I found here are no longer active. Any alternatives?
Rise from the dead!
Incredibly, but it's a fact! After successfull FAT formating I probably didn't wait long enough. Today I turned on my Charmer and several seconds after the splashscreen "QTEK" it successffully booted in WM5, performed all settings and finally started to work!
It's GSM module works, the Bluetooth works, I am able to start different applications. Just the camera does not work. And the most strange thing for me is that this ROM was for Prophet, not for Charmer
So, after all, how to proceed to upgrade to WM6? Now the bootloader is above ver.2.
Should I firstly flash it with proper ROM (for Charmer) or it's not necessary?
Should I unlock it as is now (Prophet ROM)?
Vlodeck, I rely mostly on you, since the WM6 with Touch FLO is your creation.
Thanks!
You dont have to CID unlock. Just flash that WWE T-mobile WM5 AKU2 for Charmer. Good luck.
Maybe I am boring, but steel need an advice: I cannot flash "WWE T-mobile WM5 AKU2".
1. The original RUU gives me "UPGRADE ONLY", maybe because my SPL after flashing the Prophet ROM is 2.20
2. This "NO ID RUU":
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
reaches 2% and gives "INVALID COMMAND", after that - only bootloader screen.
3. This "NO ID RUU":
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
cannot open the nk.nbf image (but works with other images), I don't know why.
What is the solution? Any ideas? Maybe some tool to downgrade the SPL to ver.1? I tried (it perhaps was bad idea)"RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" and IPL became 1.12, but SPL remained 2.20... and Charmer didn't boot after that. After flashing the Prophet ROM it works again and IPL is 1.12, SPL is 2.20
In brief... how to flash successfully the last Charmer ROM?
If you cant flash the AKU 2 charmer rom, then go for AKU3.3 rom (can be german, that doesnt matter). Once done that, flash wm6.
Success
Yeah! Thanks to vlodeck now everitging is all right! I flashed the original German AKU3.3 ROM by using this RUU:
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
(The original one gives "INVALID VENDER ID", of course, in German ) After that - successfully upgrade to WM6 TouchFLO.
Briefly:
1. First try to flashing WM6 - crash! The reason: old bootloader version (IPL/SPL = 1.12).
2. Flashing the Prophet ROM - success for FAT formatting. The Charmer turned back to life.
3. Flashing the German AKU3.3 ROM from T-Mobile, but through the No ID RUU.
4. Upgrade to WM6 TouchFLO by vlodeck. At the begining I reached the same problem, as described here:
http://forum.xda-developers.com/showthread.php?t=331717
but after istalling cert_spcs.cab and enablerapi.cab in my device I succeed to finish the process.
Thanks vlodeck, good job! This ROM is really amazing!
petrun said:
Yeah! Thanks to vlodeck now everitging is all right! I flashed the original German AKU3.3 ROM by using this RUU:
http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
(The original one gives "INVALID VENDER ID", of course, in German ) After that - successfully upgrade to WM6 TouchFLO.
Briefly:
1. First try to flashing WM6 - crash! The reason: old bootloader version (IPL/SPL = 1.12).
2. Flashing the Prophet ROM - success for FAT formatting. The Charmer turned back to life.
3. Flashing the German AKU3.3 ROM from T-Mobile, but through the No ID RUU.
4. Upgrade to WM6 TouchFLO by vlodeck. At the begining I reached the same problem, as described here:
http://forum.xda-developers.com/showthread.php?t=331717
but after istalling cert_spcs.cab and enablerapi.cab in my device I succeed to finish the process.
Thanks vlodeck, good job! This ROM is really amazing!
Click to expand...
Click to collapse
WHERE I CAN GET BOUTH FILES cert_spcs.cab and enablerapi.cab
AND WHAT VIRSION OF PROPHET ROM SEND ME WORKING LINK THX DEAR
Charmer Stuck At Splash Screen
CHARMER STUCK AT SPLASH SCREEN
--------------------------------------------------------------------------------
I HAVE A MDA COMPACTII ''MADE IN TIWAN'' I WITCH WM5 I WANT TO UPGRADE IN TO WM6 SO I UPGRADE THIS WM6 TouchFLO Charmer WM6 ver. 2.1 FINAL by vlodeck AT THIS HOME PAGE http://forum.xda-developers.com/show...harmer+cert_sp... AFTER THIS I HARD RESET MY MDA C2 ITA ON BUT THE LANGUAGE IS NOT ENGLISH I CANNOT UNDERSTAND ....
SO I CAN REFLASH IT WITH THIS ROM Charmer_Touch_GER_Beta_2.7 .. AFTER FLASHING COMPLETE I SOFT RESET MY MOBILE.
SO MY MOBILE STUCK ON SPLASH SCREEEN ONLY T-MOBILE IS SHOW
MY MOBILE DETAIL IS AS UNDER
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
PLZ DEAR SIR WHAT IS SOLUTION OF MY MDA C2
MDA2 CANNOT CONNECT WITH ACTIVE SYNC
Of course it cannot connect with ActiveSync, the device doesn't boot. One certain solution for bricked Charmer is Prophet ROM:
RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
Use this link:
http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
In order to flash this, you should enter the bootloader, without using the ActiveSync. After that try to perform a hard reset, you probably will succeed to format the FAT partition.
if you cannot connect the pda to pc HOW CAN U PUT THE ABOVE PROPHET RUU ON CUREENT?
I have a charmer and I was trying to update to wm6. I can´t because the ipl is 1.12. I updated rom to german aku 3.3. But I can´t hard reset. format error. I´m trying to put prophet rom to format it, but when I send the prophet rom, it always give me an error at 95%. error 326 - this nbf file cannot be used fo your pda phone. please check your nbf file. the aku3.3 rom flashes ok. any idea?? I try tu send a radio rom. after that is the same. 95%error. please help. I can´t bring my charmerback to life.
Hello together,
I have the same problem like _mestre_.
I updated from T-Mobile AKU 3.3 GER to WM6 and flashed back to WM5 without problems, but when flashing again to WM6 from vlodeck my charmer didn't boot anymore and had that "Format is failed"-problem when making a hard reset. I could not recover my device until now with the method explained in this thread cause of the problems "error 326 - This nbf file cannot be used for your pda phone". So the Prophet Rom does not seem to work with boot loader 3.x. Has anyone any idea? Please help! Thank you very much in advance!
Yallah said:
Hello together,
I have the same problem like _mestre_.
I updated from T-Mobile AKU 3.3 GER to WM6 and flashed back to WM5 without problems, but when flashing again to WM6 from vlodeck my charmer didn't boot anymore and had that "Format is failed"-problem when making a hard reset. I could not recover my device until now with the method explained in this thread cause of the problems "error 326 - This nbf file cannot be used for your pda phone". So the Prophet Rom does not seem to work with boot loader 3.x. Has anyone any idea? Please help! Thank you very much in advance!
Click to expand...
Click to collapse
same problem here... any suggestions or is my charmer bricked?
have a charmer. I tried to put wm6. but spl and ipl was 1.12. the phone start up and hang when installing some cabs. i restart ir and it allways crashes at t-mobile logo. i updated the rom to aku 3.3. all ok. but continues chashing on t-mobile logo. i try a hard reset. gives me a fat error. I try to put the rom from prophet to try to format it. but that rom upgrade reach 95% and stop. give me a error. this nbf file cannot be used to upgrade this device. I tryed all types of roms. most of them crashes at some point and give me that error. the rom aku 3.3 german and wwe, install perfect. I think that is the only roms I can send to my charmer. but i can´t format whith that rom, fat error. I have 3.08 spl ipl 1.12 because i sent an old charmer rom. ipl downgrade, but spl don´t. do you think my device can be protected?? I dont know that to do more, to bring the charmer back to life. will sd card method work? please help me.
Charmer dead after wm6 update whitout cid unlocking
Hi @all
i have the same problem.
iam stuped and make an wm6 update from ipl1.12 and i have forgot to cid unlock my charmer.
after the update to wm6 all looks like good. the bootscreen from wm6 i have see.
after the reset the charmer hangs at slashscreen.
now i make a update to aku 3.3 ger.
that works but hangs in the t-mobile spaschscreen.
i have tray all downgrading methodes i have read here but nothing works.
jet i have a ipl 1.12. and spl 3.08.
I think only a sd-card rom update works. but i dont have found an sd-card rom to use.
sorry to my bad english.
please can anybody help me?
cu AxelD
Is my phone already dead? Please help me!
Hi, I have a similar may be the same problem!
My phone is a German t-mobile mda compact 2
First I work with “lokiwiz v.02” to unlock the SIM, and it works really well.
Then I installed “Charmer_Touch_ver._2.1” and I could calibrate the screen, and after that Win Mobile 6 installed all the extra stuff automatically. After that the device made a reboot, but it stop at the t-mobile boot screen.
Because the bootload modus is still running, I installed the newest original t-mobile software “RUU_compactII_AKU3.3_38222_382117_026921R_TMO_DE_GER_Ship” but this also didn’t solve the problem.
Hard reset didn't work and always says "Format is
The Start screen shows me this information:
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.22
Is my phone really dead or could someone tell me a trick to reactivate it?
I think noone have a solution for us. I tried to send commands to phone whith mtty. and I can´t send. I don´t know why. so f we cannot send commands the sd card method will not work too. the only olution is to jtag the charmer. but can´t find any pinout information. if anyone knows this informtion, please help.