I've been playing with my Kaiser and these are the last remaining bugs that I can't figure out:
1. No Data while using Voice. See thread in this forum for other's complaints.
2. Phone does not wakeup when a email is received. I tried following other's advice by installing Spb time, and enabling "Wakeup Tweak" and this had no effect. Phone plays notification sound, but still is sleep.
3. Phone locks keys and sleeps while talking. On my 8125 with WM5, the phone would turn off the display, but would wake up with any key press while in the call. This is kind of handy in case I want to see another call come in, go to speaker phone, mute, etc. Right now, I need to hit the power button.
4. Menu's in messaging are really annoying. It would be wonderful if there was a way to modify the menu's in messaging. In SMS/MMS the New Menu Item is actually another menu where the first item is "Multimedia message". There are other things I find annoying.
Other than these annoyances, I think the phone is really doing great.
mswanson said:
I've been playing with my Kaiser and these are the last remaining bugs that I can't figure out:
1. No Data while using Voice. See thread in this forum for other's complaints.
You may not have 3g in your area, or your provider requires UMTS which you
can enabled by installing the Kaiser Tweak program.
2. Phone does not wakeup when a email is received. I tried following other's advice by installing Spb time, and enabling "Wakeup Tweak" and this had no effect. Phone plays notification sound, but still is sleep.
I like this effect since it doesn't waste battery. I'm not sure how to fix this one
3. Phone locks keys and sleeps while talking. On my 8125 with WM5, the phone would turn off the display, but would wake up with any key press while in the call. This is kind of handy in case I want to see another call come in, go to speaker phone, mute, etc. Right now, I need to hit the power button.
Turn off fast sleep, use kaiser tweak to disable.
4. Menu's in messaging are really annoying. It would be wonderful if there was a way to modify the menu's in messaging. In SMS/MMS the New Menu Item is actually another menu where the first item is "Multimedia message". There are other things I find annoying.
your on your own
Click to expand...
Click to collapse
1. I guess from what others are saying you have to be in the HSPDA area.
2. I guess I never realized it but mine doesn't either, be nice if it were an option but I don't know if it is.
3. These are reg settings, install the reg tweaks sticky above
4. I don't quite understand what you looking for or what is the problem.
Thanks for the reply exstatica.
I have kaiser tweak installed.
For #1, which option is this exactly, I'm not seeing what option you explain.
For #3, I have "Fast Screen Off" = Disabled (Advised)
jallenclark,
If you go into Messaging and then your Outlook E-Mail account, you will notice the Menu has "MMS Options" as the last item in the menu. On 8525, WM6, "Send/Receive" was the last option. It was nice that this was the last item. Why "MMS Option" need to be on the Email account, I have no idea.
If you go into Messaging and then you MMS/SMS account, the Menu Has a New Menu Item, then two sub-items. This isn't out it use to be.
I wish there was a way to modify these items.
I think it is near the top of the tweak program, it is called Fast Sleep.
I see what you mean about the Send/Receive and I agree completely. I am sure it would be possible to switch the order of the buttons but I don't know how to program it. I went from 8125 and it was similar to this the send/recieve was 3 up on the list.
I had 0.3 of KaiserTweak, current version 0.4 has the option you were talking about. Duh moment on my part
The Kaiser has voice and data at the same time as long as you are in a 3g area.
I can stream live TV from my media center pc using webguide4 and as long as the icon shows the "H" symbol for HSDPA then I can make and recieve calls while the video streams. The audio on the video is muted until I hang up the phone but the video is still playing non the less. If I do not have the "H" icon then this will not work.
This is not a problem with the phone it is the way the technology works. Be thankful, this is only with GSM providers. Meaning that this is not even an option with the best service area with Sprint and Verizon.
I get over 100 emails a day in my line of job, if the "feature" you describe existed (wake up on email) the first thing I'd look for is how to turn it off... My Hermes did the same BTW, you hear the sound, but the units remains in standby mode.
mswanson said:
4. Menu's in messaging are really annoying. It would be wonderful if there was a way to modify the menu's in messaging. In SMS/MMS the New Menu Item is actually another menu where the first item is "Multimedia message". There are other things I find annoying.
.
Click to expand...
Click to collapse
Not quite sure what you mean but if you are wanting a send a sms you can always set one of the softkeys to "New SMS" meaning you only need to click one button to compose a sms.
mswanson said:
I've been playing with my Kaiser and these are the last remaining bugs that I can't figure out:
3. Phone locks keys and sleeps while talking. On my 8125 with WM5, the phone would turn off the display, but would wake up with any key press while in the call. This is kind of handy in case I want to see another call come in, go to speaker phone, mute, etc. Right now, I need to hit the power button.
Other than these annoyances, I think the phone is really doing great.
Click to expand...
Click to collapse
1 click on the side wheel and it is back when you need it I love this system..
fast sleep makes my tilt (kaiser, 8925, varioIII) respond incorrectly.
fast sleep is a good idea conceptually but while it saves battery power, when i wake up my phone in call or after the call is over, It makes most of the home screen and the soft buttons unresponsive. I can usually fix this by putting it to sleep and waking it up one more time. Sometimes when this happens the backlight comes on only very dim. I dont see a setting for the fast sleep while in a call. Here are some steps i have tried to resolve this issue.
tried to remove all items from home screen
chose to not show owner info or notes when turning on device.
Changed power settings to not turn off device.
changed backlight to always stay on for testing.
told the device to not lock after no usage.
problem existed before i unlocked the device.
Any Ideas?
to answer some questions i can see headed my way here is the info on my kaiser.
provider ATT TILT (unlocked)
rom version: 1.57.502.2
radio version 1.27.12.11
protocol version 22.45.88.07H
4gb sandisk microsd HC
installed apps:
TomTom Navigator 6 with US Maps
C. Ghisler & Co. Total Commander
Caywen Kevtris 2
3dtracking free tracking
Macromedia Flash Player ActiveX
MochaVNC
PocketCM Keyboard 0.10
Ateksoft Webcamera plus
tcpmp the core pocket media player
geekstoolbox.com siriusWM5
googlemaps
cingular pre_midlets
OZ communications OZ IM
peekpocket
BTAudioToggle
deathdrive
WM5 windows media codecs for WM6
I love my phone. Touchflo is working but tricky at times. I cant wait till the cube becomes solid. I havent tried any other roms yet.
some of the cabs i am using
attached are the exact cabs i used to install some of the apps.
I'm still annoyed that unlocking the phone (as in, unlock when it comes out of suspend with a pin, not sim unlocking) requires you to hit UNLOCK when you type in the pin, instead of the old way where the phone unlocks when you hit the last digit.
I'd still love some way to change it back.
Kaisertweak Works!!!
kaisertweak rocks. It disabled fastsleep which makes my problem not happen. I attached it.
2 issues
Is it just me or is the Tytn II's speaker behaves differently to the original Tytn and D810?
1. Go to the phone keypad, try dial a string of number quickly, the speaker will start to pop as it can not play the key sound fast enough.. This has never been a problem with my 838 Pro or D810.
2. Make the Tytn II to play a sound, after it finishes listen carefully for a noise that appears to be the speaker turning off, it seems like after a sound is played the speaker's power is continuously on for a few seconds before switching off. Again this is different and unnoticeable on the 838 Pro or D810.
happens to me too.
123thisisme said:
Is it just me or is the Tytn II's speaker behaves differently to the original Tytn and D810?
1. Go to the phone keypad, try dial a string of number quickly, the speaker will start to pop as it can not play the key sound fast enough.. This has never been a problem with my 838 Pro or D810.
2. Make the Tytn II to play a sound, after it finishes listen carefully for a noise that appears to be the speaker turning off, it seems like after a sound is played the speaker's power is continuously on for a few seconds before switching off. Again this is different and unnoticeable on the 838 Pro or D810.
Click to expand...
Click to collapse
I get the popping. It sounds like its making the speaker clip. I didnt get it until i changed to a cooked rom. IMHO, all cooked roms have bugs....but i would gladly settle for all of the worst bugs in the cooked roms over using the att tilt rom which was loaded with bloatware, fastsleep, proxy, crappy camera, crappy softkeyboard, etc.. etc.. etc... I really dont think its the speaker. I think its the rom. Backup and try a different one if you feel like testing.
Thanks,
-J
Hi all,
I've searched high and low for a solution to this and am desperate to have a resolution. My problem is when a text message comes in my phone wakes up and doesn't go back to sleep/standby (even though its set to shut off after 1 minute of inactivity). I have disabled all notifications when an SMS arrives, but still the phone ignores this and wakes up the screen and doesn't disable it again (quickly draining the battery).
Does anyone have a solution for this? A registry tweak/software package?
this should not be happening. Do you have any third party software like phonealarm configuring your notifications.
If not, you may need to do a hard reset to fix this because it should not happen. You can also try downloading memaid (full version needs to be purchased), which has a tool to clear the notification queue.
I'll check out what I have installed that might be causing this....
Sounds like it might need a hardware reset (sigh)
I have had my Diamond for about 5 days now. The other day I noticed it will get stuck in a constant weak vibrate. It seems that a vibe event will cause it to start, like the phone doesn't know to stop vibrating.
I call it weak, because while it is doing this, I can go to volume settings, select Vibrate and the much stronger vibrate even occurs. It seems if I shake the phone or move it around a bit the weak vibrating will stop.
Also shaking the phone sometimes causes this weak vibrating to begin.
Sounds like a mechanical issue ? I have installed some apps like GSen & SensorLock. A couple others like Advanced Config and done some of the registry tweaks.
Any suggestions would be greatly appreciated.
Thanks in advance.
mackerman said:
I have had my Diamond for about 5 days now. The other day I noticed it will get stuck in a constant weak vibrate. It seems that a vibe event will cause it to start, like the phone doesn't know to stop vibrating.
I call it weak, because while it is doing this, I can go to volume settings, select Vibrate and the much stronger vibrate even occurs. It seems if I shake the phone or move it around a bit the weak vibrating will stop.
Also shaking the phone sometimes causes this weak vibrating to begin.
Sounds like a mechanical issue ? I have installed some apps like GSen & SensorLock. A couple others like Advanced Config and done some of the registry tweaks.
Any suggestions would be greatly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Un install sensor lock and test. i had this issue with an old version ofthat application.
I have uninstalled both GSen (Since it wouldn't rotate SMS for me on Sprint Diamond) and Sensor Lock. The device is still doing this strange vibrate.
I noticed even when I hold the power button and turn it off (soft reboot?) it continues the odd vibrate. The vibrate will however stop when I remove the battery.
Just giving an update. The phone has stopped doing this strange vibrate action. Not sure if it was related to the program un-installation or not. As stated above it continued to do the vibrating action after the program was uninstalled, but definitely less frequently.
I had something very similar the other day. I'm using the swift ROM.
Its never happened before, and i've been using this same rom a for a while now.
ya i have the sprint diamond and mine did that the one time when i took it off the charger. it would vibrate pulses and the phone was like frozen. So i plugged it back in the charger and uninstalled sensorlock and its fine now
mackerman said:
I have uninstalled both GSen (Since it wouldn't rotate SMS for me on Sprint Diamond) and Sensor Lock. The device is still doing this strange vibrate.
I noticed even when I hold the power button and turn it off (soft reboot?) it continues the odd vibrate. The vibrate will however stop when I remove the battery.
Click to expand...
Click to collapse
Somewhat off topic but did you find anything that rotates in SMS on the Sprint Diamond?
Don't blame it on Sensor Lock. I don't have that program installed & mine started vibrating non stop the other day. I couldn't get it to stop & finally did a hard reset. It still continued to vibrate all the way to the point where it got to the green Windows Mobile screen. It stopped, after that & it hasn't happened again since (this was on Saturday). I had done some of the reg tweaks for TF3D performance & nothing else.
sensor lock was the only program i had installed so it was the reason for me. as far as i know only way to rotate SMS with sprint diamond is the long press key
I have also done some of the reg key tweaks on my diamond. It did happen again last night, but before that it's been a few days. I had GSen installed, and it wasn't rotating on SMS, I think I read it wouldn't work with the Sprint Diamond.
What is the long key press method?
Just upgraded to 6.1. I would like to keep the phone asleep when an alarm goes off, I only want a sound or vibrate notification. I'm pretty sure I had it set-up that way before the upgrade.
The problem is that the phone wakes up for a reminder and it will end up dialing a phone number or some other random thing before it goes back to sleep. This happens because I don't hear the alarm, it is still in the holster and movement pushes on the screen. This has happened several times.
Maybe I was using an app before that I need to put back on, I don't remember. This is very annoying and potentialy embarrasing.
Come to think of it, I want the phone to stay asleep no matter what, until I wake it up. I may have had a phone call that I missed and the movement caused the phone to redial. How can I keep the screen disabled until I push the wake-up button?
Thanks-
Diff
Edit:
This is the Tilt w/ ROM from HTC site
Lock your handset
I think locking the handset will solve your problem. I just tried it, I was able to dismiss the calendar reminder but other functions needed me to follow the unlock route. I assume this will work if you also get called.
Install S2U2.
Set it to lock on wakeup.
Thanks Proto, I'll try S2U2. It looks like it may work, and it is pretty cool too.
Although I would rather use a method with a smaller footprint. There has to be a registry hack that would simply keep the screen disabled until I activate it.
Anyone?
no wakeup on reminder without s2u2
I don't like s2u2 so that doesn't do it for me. I've searched a lot on the internet but I can't find a solution that prevents reminders waking up my phone (and after that being awake in my pocket )
Somewhere in the phone there must be a list of events that can wake up the phone? Somebody knows?
Is there any solution to this problem? Last time my phone woke because of a reminder and then it sent an new appointment to a collegue while moving around in my backpack. There has to be a RegKey or smth on this
hi people!! i have a question, whishing you could help me please!!
i have installed in my diamond one program call sms reports eraser, which automatically saves the delivery reports in a different paste (not in inbox).. i need that because sometimes i need to check if the text message really gets to its destination..
however, i have a little problem: because the pda assumes the incoming delivery reports, it turns the display on..
so, i'm asking if anyone know some trick that could not turn the display on, because sometimes i forget that, and becaus the diamond is unlock, i do a lot of things without knowing (when it is on pockets....)
thanks in advance!!!
you could tap the battery icon make it so the light goes off after ten seconds use diamond tweek and make the phone lock its self auto
http://forum.xda-developers.com/showthread.php?t=409540