OK, this ide was stolen from a guy at the norwegian forum www.windowsmobile.no: Can't somebody who knows what they're doing program a small app that can be set to turn on BT and WLAN whenever the unit is turned on? Then I'd be very happy, at least!
may be this tool can help?
http://oz.sciox.org/ozbt.html
Wow! At first glance it seems to work! I'll have to turn off the unit for a longer time and see if it still works. I'll know in the morning...it's been along night. Election night in Norway.
I think this does work but like Mastiff says I am going to leave off my SX66 for a bit.
If this does work, this needs to be added as a patch?
I am pretty sure this is working for my SX66.
I first manually turned off Wireless and Bluetooth. Then restarted my PDA, which both Wireless and Bluetooth where off when it was done booting. I then went into ozBT and changed Wireless/BT from Default On to Defaul Off.
I was then going to restart the PDA but before I could Wireless and BT popped on!
I also turned off my PDA for a bit and Bluetooth was off - then it turned it's self back on.
Nice!
Someone needs to invite this guy over here and get him on the staff!
Why would you want BT and Wifi turned on everytime you switched on your PPC? Wouldnt that kill the battery? Every time you soft reset, turn on to check email, etc. Can someone explain what this achieves?
Myself I do not want WiFi on but I do for Bluetooth, since I use a BT Headset all the time.
First of all this doesn't work very well at all for me. On my Qtek 9090 this has unforseen side effects for WiFi, so I have gone back on it. It doesn't log into my default network at once, like it does when I turn it on manually. Instead it either tries to log on to the other WiFi network I have in my house (don't ask), even though that's weaker and MAC blocked for the unit. And if it doesn't find that, it just stays on "searching". And even when searching it don't show the WiFi icon, it shows the GPRS icon all the time. So for my unit this is a dead end. If anybody else tries this and doesn't have problems, I will have to do a hard reset and see if it's some kind of third party program that creates this problem.
Second, I want them on like I always have had them on with my four last PPCs since I have a wireless network both in my house and in my car, and I control music, lights and a lot of other stuff in the house and music in the car with it. Besides when I'm driving I always use TomTom to warn me of speed cams. And I have charging in both my cars, on both my motorbikes and in my home office (I run a translating business from home). So I'm never far away from charging and never have problems with the battery, and finally I use WiFi a lot more than I use the phone part, with NetRemote controlling the house, and surfing.
where is the file
where is the program can be found.
http://oz.sciox.org/ozbt.html
But no my system it's trying to connect to the wrong network every time. If I turn on the WLAN manually I don't have that problem at all, it connects to the default. I'm starting to think that the program forces the driver to check for the default network to early, before the network card is ready, then gives up on that and start looking for other networks a few seconds later, which is when the network card really is ready to connect.
Related
When I switch off my XDA IIs by button or SW button in most of the cases the device switches on it self for one more time.
Is there anyone who can help?
Thanks guys!
:?:
I have the same problem, I had a bluetooth headset paired to it, maybe that is it, I only got the XDAIIs today so I have not had much time to watch it but it happened tonight and the XDA mini never does it.
Each time the BT headset is switched on or off and pairs up or releases, when a text message arrives, when you come out of a signal blackspot and reconnect and find you have missed calls etc.
Basically anything that results in a visual change caused the device to switch on.
Very annoying. Don't know the solution.
I share your pain.
Joe
I'm using http://www.trancreative.com/nicestart.aspx to keep the device locked, but it will turn on/off, but now it's locked so i dont delete data when it turns on in my pocket.
No matter what you do, the device will turn on at least once every hour.
I read somewhere that it does this to check the battery status.
I had the same problem once. Please open ActiveSync, switch the device off and see if ActiveSync is trying to connect..
Of course there can be lots of other reasons...
Yes I didn't mention on my post that activesync also seems to be a player in this problem.
If activesync is running, somehow the device syncs at varying intervals from 5 mins-1hr and switches it on to do so.
I used the attached to kill activesync to stop it happening.
Hope it helps.
Joe
I just unchecked the "Use mobile schedule to sync with this PC" setting and the problem was solved.
Though this seems to be a bug in ActiveSync..
Thanks
Works fine, great!
i had this problem on my old rom, and since i upgraded to 1.40, it aint done it since. maybe u need to upgrade.
Below is from this THREAD
Mastiff said:
OK, this ide was stolen from a guy at the norwegian forum www.windowsmobile.no: Can't somebody who knows what they're doing program a small app that can be set to turn on BT and WLAN whenever the unit is turned on? Then I'd be very happy, at least!
Click to expand...
Click to collapse
ValeraVi said:
may be this tool can help?
http://oz.sciox.org/ozbt.html
Click to expand...
Click to collapse
odie3 said:
I am pretty sure this is working for my SX66.
I first manually turned off Wireless and Bluetooth. Then restarted my PDA, which both Wireless and Bluetooth where off when it was done booting. I then went into ozBT and changed Wireless/BT from Default On to Defaul Off.
I was then going to restart the PDA but before I could Wireless and BT popped on!
I also turned off my PDA for a bit and Bluetooth was off - then it turned it's self back on.
Nice!
Someone needs to invite this guy over here and get him on the staff!
Click to expand...
Click to collapse
Visit ozBT project.
Read the above WEB PAGE!
I beg to differ! On my Qtek 9090 this has unforseen side effects for WiFi, so I have removed it. The BT wasn't that big a deal, I use WiFi a lot more. It doesn't log into my default network at once, like it does when I turn it on manually. Instead it either tries to log on to the other WiFi network I have in my house (don't ask), even though that's weaker and MAC blocked for the unit. And if it doesn't find that, it just stays on "searching". And even when searching it don't show the WiFi icon, it shows the GPRS icon all the time. So for my unit this is a dead end.
I tried this program. While it works, it wakes up your phone so that it can never sleep. This would kill your battery. I removed it.
After a full hard reset and installation I still have the same problems with this app. So as it is now it's not the answer to this problem, I'm afraid. Perhaps for SX66, but not for Qtek 9090.
downloaded
i have downloaded this utility but i am still trying it with my head set while i am driving,,, and i hope it works
I was on a trip yesterday and I noticed that when I turned on flight mode, it also turned off Bluetooth. I have a bluetooth GPS receiver that I use with my Alpline but wasn't able to in the plane because when I turned off my phone it also killed my Bluetooth.
:?: Is there a simple way to turn of JUST the phone radio, but leave the bluetooth up? My XDA II allowed me to turn off the phone's radio and leave bluetooth up. It just looks like bluetooth, WiFi and Phone have all just been lumped into Flight mode. Is there a system tweak or even a utility? I would be ok with either. Just found this annnoying. Thanks in advance for answering my question.
genghis said:
I was on a trip yesterday and I noticed that when I turned on flight mode, it also turned off Bluetooth. I have a bluetooth GPS receiver that I use with my Alpline but wasn't able to in the plane because when I turned off my phone it also killed my Bluetooth.
:?: Is there a simple way to turn of JUST the phone radio, but leave the bluetooth up? My XDA II allowed me to turn off the phone's radio and leave bluetooth up. It just looks like bluetooth, WiFi and Phone have all just been lumped into Flight mode. Is there a system tweak or even a utility? I would be ok with either. Just found this annnoying. Thanks in advance for answering my question.
Click to expand...
Click to collapse
There's no way that I know to have flight mode on and still be able to use bluetooth, wifi or gprs on the XDAIIi.
I also know that you can on the XDAIIs.
Actually there is.
Check this thread : http://forum.xda-developers.com/viewtopic.php?t=36788&highlight=flight+mode
The interesting part is :
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Change "IsFMCheckEnable"=dword:00000001 to "IsFMCheckEnable"=dword:00000000
It allows you to use WiFi and Bluetooth while in flight mode. I found about this only minutes ago, and I'm sure glad I did
Cheerio !
I'm pretty sure that on flights it is illegal to use any form of wireless transmission hence BT & WiFi turning off at the same time as GSM. This is because they are all in the microwave band and can allegedly interfere with aircraft instruments.
If all else fails, turn flight mode on, turn BT on, the phone part will ask for a PIN which you must enabled this, select cancel and the phone part will turn off again leaving the BT active.
Thank you Mr_Smoke!
That App Radio Off works GREAT! I knew there had to be a simple fix.
:arrow: Bluetooth interference with instruments debunked:
http://www.bluetooth.com/NR/rdonlyr...7E/0/Aircraft_Safety_Report_for_Bluetooth.pdf
:!: Good article where they tested a 727 and 747 with bluetooth devices. They state that both UHF and VHF had a VERY remote chance of interference, but that the threshold would drop off before the device could emit enough power to actually interfere. Communications devices on aircraft have all been shielded and tested to higher energy levels than a simple BT signal from a PDA could push out. The only cavet is that use is prohibited during critical phase of flight (take off and landing) which is when the airlines currently make you turn off your devices.
I love using a BT GPS receiver (I put it up to the window and close the window shade to hold it in place) with Pocket Earth.
http://www.bluepointstudios.com/www/?fuseaction=product.poe
Its a VERY sweet program to show you where you are, direction you are headed, speed, and estimated time to your arrival. The only thing I wish that program had was altitude information which I emailed them as a suggestion for their next revision to their software.
pug said:
If all else fails, turn flight mode on, turn BT on, the phone part will ask for a PIN which you must enabled this, select cancel and the phone part will turn off again leaving the BT active.
Click to expand...
Click to collapse
You sure about this Pug? The message says that only emergency calls can be made until the pin is entered, that would suggest that the phone is still functional.
Or is this different to the message/routine at start up?
On a far more important note, I hear your looking at jumping ship to an Universal - what are we going to do without you? :wink:
Tom
No need to worry, the missus is having the Alpine for Tomtom etc. A bit of a waste know but it' too big for her for everyday use. I'll still be looking about here in the Alpine section, don't want to let my fans down now.
My bro and I both bought the above units and have upgraded to the GPS rom. Just wondering if anyone else has noticed the unit switches on by itself. We are both experiencing this problem but also have the same programs running. The button lock feature is set on.
That's right. My Trinity is alive, too ;-)
I'm using the dopod rom about one week and I noticed that today for the first time.
There's no application running in the background. It's still alive ;-)
I do not care about this problem.
Hi,
Any software you are running?
Best regards,
Gilbert
Today programs are as follows:
cLaunch
Today Agenda
Battery Pack / Program Bar
PPCProfiles
I will try and eliminate one by one to see if it is software related.
Anyone else using one of the programs and having the unit switch on by itself. This issue bothers me as I see its going to be a drain on the battery.
Activesync may be the culprit
Many PPC WM5 devices tend to turn themselves on. It is usually an Activesync setting that periodically turns on the device and tries to connect to a non existant server. Best bet is to set up a dummy server on Activesync on the PPC, then set the sync settings to Manual, then delete the dummy server.
Sorry if you already have done this, but it certainly solved the issue for me.
Camstech said:
Many PPC WM5 devices tend to turn themselves on. It is usually an Activesync setting that periodically turns on the device and tries to connect to a non existant server. Best bet is to set up a dummy server on Activesync on the PPC, then set the sync settings to Manual, then delete the dummy server.
Sorry if you already have done this, but it certainly solved the issue for me.
Click to expand...
Click to collapse
Hey Camstech, could you please give me a detailed description of how to set this up?
Thanks
My phone seems to do this too, but from what I can see, it is because of bad 3G coverage and the phone has to roam to GSM and back. Only happens at work where I got bad coverage (2/4).
AFAIK this issue is common to ALL devices and all versions.
I understand that you DO NOT TURN THE PDA OFF (Holding the on/off button), just go to "standby". So there are many Apps that tend to "awake" rather than TURN ON your PDA. It's like Sleep mode vs Hybernate in Windows. Agenda or scheduled items may turn your PDA active, even SMS messages that don't fully arrive, phone reconnecting, GPRS or UMTS changing status, profiles that are set to change over time, incoming calls, etc.
I think this is not specific to a certain ROM but to the fact that you have a full time connected and running computer in your pocket....
Hope it helps.
Looking Glass said:
AFAIK this issue is common to ALL devices and all versions.
I understand that you DO NOT TURN THE PDA OFF (Holding the on/off button), just go to "standby". So there are many Apps that tend to "awake" rather than TURN ON your PDA. It's like Sleep mode vs Hybernate in Windows. Agenda or scheduled items may turn your PDA active, even SMS messages that don't fully arrive, phone reconnecting, GPRS or UMTS changing status, profiles that are set to change over time, incoming calls, etc.
I think this is not specific to a certain ROM but to the fact that you have a full time connected and running computer in your pocket....
Hope it helps.
Click to expand...
Click to collapse
I would have to agree to a point, as I have noticed when PPCProfiles changes automatically to my car mode (bluetooth on) the pda turns on. So you are right that it's programs possibly turning it on but this never happened on my O2 mini (WM2003SE). I'm hoping a new ROM may fix this issue.
I have disabled the "auto switch template" on PPCProfiles which changes over to bluetooth at a certain time of the day and it appears to have stopped the pda turning on by itself. So far so good for 1 day. Curious if anyone else is using PPCProfiles and are experiencing this. Does anyone else use other phone profile programs with switching templates that does not turn on their pda by itself?
frigit said:
I have disabled the "auto switch template" on PPCProfiles which changes over to bluetooth at a certain time of the day and it appears to have stopped the pda turning on by itself. So far so good for 1 day. Curious if anyone else is using PPCProfiles and are experiencing this. Does anyone else use other phone profile programs with switching templates that does not turn on their pda by itself?
Click to expand...
Click to collapse
Whoops!
Where can I find PPCProfiles. I dont seem to have that kind of settings in my original HTC P3600....
Very interesting.
saminegm said:
Whoops!
Where can I find PPCProfiles. I dont seem to have that kind of settings in my original HTC P3600....
Very interesting.
Click to expand...
Click to collapse
You can find the program link below. I never had any issues when using this program on my O2 mini. It still works on my dopod d810 just that I have disabled the auto switch template.
ps the chrome template is the nicest
http://www.modaco.com/Latest_Version-t205779.html
Correction to my thinking it was PPC profiles. It is actually happening when the bletooth is turned on ( hence ppc profiles switching over to car mode - bluetooth). I disabled ppc profiles and turned on bluetooth and strangely enough the dopod kept turning on.
Is anyone else experiencing this problem when they have bluetooth on?
frigit said:
I have disabled the "auto switch template" on PPCProfiles which changes over to bluetooth at a certain time of the day and it appears to have stopped the pda turning on by itself. So far so good for 1 day. Curious if anyone else is using PPCProfiles and are experiencing this. Does anyone else use other phone profile programs with switching templates that does not turn on their pda by itself?
Click to expand...
Click to collapse
Mine sometimes turns itself on when it automatically checks my email accounts, but not always. I wonder if it isn't the 3G/Edge switch that is explained earlier. My house is in a 3G fringe area. I believe it doesn't try and wake itself up when the Wifi is on. My Prophet never did this, it would only wake up for an alarm, call, or SMS.
The main issues are reduced battery life and if you have your phone in your pocket and it wakes up, buttons can be accidentally pressed before it goes back to sleep.
Guys,
I don't know if this is actually a cure yet, but it seems to have worked on my first attempt.
First the background...
When I first got my Kaiser (UK Orange Tytn II) I was at work, I quickly enabled the wifi and all was well. When I got back home later that day I really struggled to get a connection to my access point at home. I connect to a Cisco aironet in both locations (I know there is a post about cisco extensions but I know that is not my problem as I can and have connected to both APs on at least one occasion with no problem).
After deleting wireless settings and a few soft resets I was able to connect at home. I managed to use that wifi connection all night without a problem. Getting back into the office the next day resulted in the same problems connecting to the office access point.
The AP is visible and is 'Available' but doesn't connect automatically. I tried to establish the connection manually, the phone shows the AP as 'Connecting' but shortly after goes back to 'Available'.
I've tried flashing different roms and radios but to no avail.
Last night I got to thinking that I generally connect to my AP, browse the web, sync mail etc, but I don't switch off the wifi when I am finished. I just let the phone go into standby as that shuts the wifi off anyway. So to try something different last night, I disabled wifi once I had finished.
This morning, when I got into the office, I enabled wifi and for the first time it connected immediately and I'm browsing on it just fine. This leads me to believe that there is a problem when the wifi is enabled and the phone is is standby mode for a considerable length of time and then is woken up in a totally different location.
I'll test again tonight by disabling the wifi before I leave the office and hopefully I'll get an instant connection when I get home.
Any thoughts?
I get the same thing for work and cannt connect even though it says available, and then connected.
Tried your approach but didnt work for me.
bluemamba said:
I get the same thing for work and cannt connect even though it says available, and then connected.
Tried your approach but didnt work for me.
Click to expand...
Click to collapse
Of course that might be due to any number of factors. Have you ever been able to connect at your office?
i've had issues with my orange (uk) tytnII actually wanting to make a GPRS connection whilst connected to WiFi when i try and go online.
I connect at work using a program called Odyssey and eventually got that working yesterday, but had to turn off most other connectivity before it'd actually use the WiFi.
then I was at a pub later on with a free wifi hot spot, but that wouldn't connect despite it being 'available'
YAY!
Well...
I retested my theory. Disabled the wireless before I left the office. Got home, enabled it and I connected with no issues.
So there is a problem with having the wifi on when the phone goes into standby and it then waking up in a totally different location.
I wonder if WM6.1 addresses this. I hope so because although I have a work around, its still a pain in the a$$
I had similar problems on my Wizard... never had anything like that on my Kaiser.
DarkDvr said:
I had similar problems on my Wizard... never had anything like that on my Kaiser.
Click to expand...
Click to collapse
Could you tell me what radio you are using?
foobar1977 said:
Could you tell me what radio you are using?
Click to expand...
Click to collapse
ROM: DualTouch v3 (dutty's v3)
Radio: 1.27.11.31
No problems with it.. no missed calls, calls come through fine when I'm on HSDPA.. no wifi problems so far.
DarkDvr said:
ROM: DualTouch v3 (dutty's v3)
Radio: 1.27.11.31
No problems with it.. no missed calls, calls come through fine when I'm on HSDPA.. no wifi problems so far.
Click to expand...
Click to collapse
Thanks, I might give that a go when I get a chance.
My problem is similiar. If I connect to a certain access point, it will stop working after a minute or so and then not be able connect to that access point or any other one, they are just listed as available. Strange...
Firstly set your wifi power to max.
Secondly, my orange Tytn2 (now dutty v3'd) has never had that problem.
I leave navizon on a lot of the time and thus enter and leave wifi zones frequently with wifi on and my device connects fine to the regular ones I use.
Wi-fi connection
Hi unwired,
I've been surfing this site, but unable to find an answer yet, a newbie that I am. Is there a way to define one network as default? Anytime I want to connect, I have to do it manually, and define settins, rather than just switch it on, connect automatically and fire away. This is how it works on my laptop, or I have to high expectations from the Kaiser?
Thanks in advance.
unwired4 said:
Firstly set your wifi power to max.
Secondly, my orange Tytn2 (now dutty v3'd) has never had that problem.
I leave navizon on a lot of the time and thus enter and leave wifi zones frequently with wifi on and my device connects fine to the regular ones I use.
Click to expand...
Click to collapse
This is nothing to do with power settings, or at least not for me or several other people I have spoken to. Its generally not a problem when the wifi is on, its after the device has gone into suspend.
I'll bet my bottom dollar that if I set the reg hack so the wifi is always on I wont have this problem but I can't deal with the battery drain.
Just this morning I was connected to my office wifi, went for lunch without switching off the wifi first and when I got back I was longer able to connect to the same access point.
I then deleted the settings for the access point, soft reset and I'm connected again (even if I switch to low power).
To say that this pi$$es me off is an understatement, what kind of wireless device cant handle waking up in a different location to the one it went to sleep in!?
foobar1977 said:
This is nothing to do with power settings, or at least not for me or several other people I have spoken to. Its generally not a problem when the wifi is on, its after the device has gone into suspend.
I'll bet my bottom dollar that if I set the reg hack so the wifi is always on I wont have this problem but I can't deal with the battery drain.
Just this morning I was connected to my office wifi, went for lunch without switching off the wifi first and when I got back I was longer able to connect to the same access point.
I then deleted the settings for the access point, soft reset and I'm connected again (even if I switch to low power).
To say that this pi$$es me off is an understatement, what kind of wireless device cant handle waking up in a different location to the one it went to sleep in!?
Click to expand...
Click to collapse
I have had similar problems. I get disco'ed from my AP at home and it won't let me re-connect. Jut keeps asking for the WPA2 key.
I use the same remedy as you. Turn off Wifi Before walking out of range. No amount of Softreset's fix it for me.
Although, some ROM's work better than others. ie Alex's WM6 ROM would not connect at all, the ROM / Radio in my sig are perfect so far.
P.S. This might also be tied to my router, cause a router reset fixes it for me. But i doubt work will let you try that
DaveShaw said:
Although, some ROM's work better than others. ie Alex's WM6 ROM would not connect at all, the ROM / Radio in my sig are perfect so far.
Click to expand...
Click to collapse
Yeah I'm really hoping that this is fixed in WM6.1 which, if your experience is anything to go by, might well be the case. I really wanted to wait for the official 6.1, but I feel a flash of Duttys 6.1 coming on real soon.