I have installed the voice program that was on the Companion disc and it is a pia to use. Is there a better program as I am in the US and I don't want to go through all the crap to use the program that is on the Companion Disc as it also has to be called up and can't be accessed from the voice using the BT Motorola HS850 unless I manually select the prog from the menu and go through the steps that way. No use using the Headset if I have to do all the work from the XDAlls itself. Help !!!
Related
I have posted This thread to assist anyone like me, who is not a programming whiz. Got to Install this mainly through trial and error and I am not an expert in this. So If anyone can make my steps easier please do!
This is a Variation Installation For a thread a while back in October 2005 Author Ncruz and effjay. Ncruz Posted a wm5 cab. This cab does not install directly due to permissions. However I have extracted the files using windows cab manager.
First are the files are required in windows. If it asks about permissions copy to PDA root folder then copy with Resco File Explorer and overwrite. Next are the registry files. You can import them with a registry program such as tre or regedit.
If you want Microsoft Voice commands to be the default program overwrite SSDialer.exe in windows folder with Voicecmd.exe from Program files/Voice command/ otherwise Cyberon Voice is initiated when you press headset.
I will post the cab in its entirity although it will not install, incase someone knows an easier method to get voice commands working Please contibute to this thread. However this method worked for me. Below in the zip are the files Extracted with Win Cab manager in zip format so you can copy zip to your pda then extract them to the correct folders, along with the registry files you need to import to registry.
N.B..sound of Voice commands is through PDA and not headset. Pressing headset connect button opens Cyberon or active voice command depending on what you have
Can not seem to be able to import the reg files....
OKay, got the files to import and the files copied - no go for me. Darn-it.
Installation
did you do a soft reset with the software built with the rom and repair the bluetooth headset
I might have reset without using the software reset....
However, got it working with this cab file that I found on my storage card. I even got MS Voice Command to work when I hit my BT Headset button.
Heck, it did not even change the record button to SSDialer! I would have thought it would but it did not. So, I am happy!
glad its working for you
now how can i do?
download odie3 's cab file and install? that's right?
Then, when device auto turn off, bt still go off as before?
I can't download files..... Where can I get them?
Re: now how can i do?
kriengkrai said:
download odie3 's cab file and install? that's right?
Then, when device auto turn off, bt still go off as before?
Click to expand...
Click to collapse
The only way I know how to keep BT on is by plugging in my Device to a power source and doing a soft-reset. As long as I do not turn it off with the power button or have it set to auto-power off while plug in, BT will stay on. I do this everytime I get into my car - since it takes me a hour [sometimes more] to get home, so my BT Headset always works.
Hopefully I explained that correctly for you to understand....
Odie
Your query confirmed. The Wlan manager icon from the today screen goes as a side effect of installing the cab. Wifi still works but the Icon in today is not there. Not a big deal for me, as I have skinned my Pda with Wisbar, which has a wifi icon.
Re: Odie
MOHDWADEA said:
Your query confirmed. The Wlan manager icon from the today screen goes as a side effect of installing the cab. Wifi still works but the Icon in today is not there. Not a big deal for me, as I have skinned my Pda with Wisbar, which has a wifi icon.
Click to expand...
Click to collapse
Yes it happened to me as well, but i prefer BT Voice Command Activation than WLAN icon
Thanks for the info
BT activation doesn't work for me...
For some reason the activation through BT headset doesn not work for me.
I'm using WM5 TuMa 1.3 ROM.
The BA_WM5_Voice_Dialer_2.cab doesn't install on my device (permission violation), so I copied the files manually to the Windows folder.
The reg files also don't import to my registry when double-clicking, so I made the changes manually.
It still doesn't work.
Now, when I hit the button of my BT headset (Moto HS-810), the standard dialer is activated (instead of the voice command app) and I hear hissing sounds in the headset.
I tried it both with Cyberon and MS apps. Both don't work.
Did anyone encounter this problem? Anyone solved it?
Thanks.
anyone knpow how to do this with voice command on 2003se?
Just upgraded to TuMa 1.3 and have found a MUCH more simple way of doing it.
1) Install Microsoft Voice Command
2) Download Total Commander (http://www.ghisler.com/ce.htm)
3) Using Total Commander change the read only tickbox for \windows\sddialer.exe so that there is no tick (1 press just greys it out, i needed to press twice) <- browse to \windows in TC and right cick (hold down) on sddialer.exe, and click properties.
4) (you don't need TC for this) Copy %install dir%\voicecmd.exe (where %install dir% is the directory you installed voice command to) to a temporary location and rename it to sddialer.exe.
5) (using TC) 'Right click' on your new sddialer.exe (previoult voicecmd.exe) and select 'cut to clipboard' then navigate to \windows\ and 'right click' and select 'paste from clipboard', when propted overwrite the origional file.
6) press the button on your headset and test it!
the only thing we need now is for some clever person to work out how to route the voicecmd audio through to the headset instead of the load speaker (to my knowledge it uses the microphone on the headset allready (at least it works when i speak quietly from the next room )
it works like a charm
cheers
Do what Midlet says?
If I do what Midlet says- will I still need the 2 files that mohdwadea has posted? Is Midlet's process a complete stand-alone process... or is if preceded by more steps?
Re: Do what Midlet says?
sgrbhtngr said:
If I do what Midlet says- will I still need the 2 files that mohdwadea has posted? Is Midlet's process a complete stand-alone process... or is if preceded by more steps?
Click to expand...
Click to collapse
Have not investigated midlets way of installing as Mine is working. However i suggest that if you check your registry and see if the reg keys i posted within the zip are there. If his way works fine, if it does not i suggest you import the keys into registry and see if that helps. I also strongly suggest you make a note of the keys and where they are imported too, as if it does not work you can remove them.
It worked
Mohdwadea,
Your method worked! This time I performed a soft-reset after the installation and also re-connected the headset. I did not have to go he registry-entry route because the cab-file installed on my device.
This will help me a lot on the road in business. God bless you.
Just glad its working for you!
voice not sending
MOHDWADEA,
I am using this fix a lot on the road. It works very well... expect for in one situation! I can initiate voice dialing by the record button on my device and it accepts voice dialing commands through the bluetooth headset and teh call goes fine.
However, if I initiate the voice dialing using the button on my blueooth headset (Cardo Scala 500), it initiates the voice dial app just fine, accepts commands and conencts the call.... but the other party cannot get my outgoing voice through my bluetooth headset, rather it gets the voice from the mic on my phone. Also, the incoming sound can be heard in my bletooth headset but ALSO on the phone.
Any suggestions?
Thanks!
Sagar
I-mate PDA 2K
WM5 TuMav1.3
Just sorted BT voice dialing on my TRINITY witha Jabra BT250 all working fine
using the infor here:
http://forum.xda-developers.com/showthread.php?t=281977
I've also mastered using BTAudioOn.exe in the registry in place of the voice dialer to give me Audio Streaming
Only problem is, as the article in the forun suggest it disables the voice commands!! I can live with this as I only want to stean the TOMTOM voice when using the satnav while walking or on my bike.
What I had in mind was a a couple of icons, one to make the registry changes for the BT Audio streaming and the other icon to toggle back (ie change the registry back to voice comand via the BT headset). As far as I can see (once BTaudioOn.exe is copied to my Trinity) the only difference between turning my Jabra BT250v into an audio streaming headset and a phone headset are the two registry changes; and then change them back to give me a Phone headset again.
Can anyone tell me if this is possible to use a .REG file?
Can it be written on a PC and then copied to the Trinity so that it runs?
Will reg files run the same on a PDA and they do on a PC?
Thanks in advance
Try to use SKSchema software, it can put any values in registry depends of any window or process runing on the device. It watch & if you made a rule to put in registry key voicecommand with launcheAppEnable zero as window of TomTom appears u can get a continiusly sound in handsfree if also it put long value in Duration option.
Where do I fond the software please
Also... could you please explain a little better a I don't understand what you have written...sorry!
http://pocketgear.com/software_detail.asp?id=20385
& read help in windows directory after install
How would I go through with accessing to remove MS Voice Command from the kaiser without opening the main settings window. I installed a few applications (i.e., TouchFlo 2, Youtube, HTC Audio Manager, PTTfix and MS Voice Command 1.6) on my friends Kaiser running WM6.1. All of these programs work fine on mine (WM 6.0), but now on his the phone reboots everytime you click on settings int he start menu. The only thing I can guess thats causing it is MS Voice Command since it creates an Icon in the Settings window.
I need to either A) find a way to manually remove the icon maybe...if that could work, or B) manually find a way to uninstall voice command.
I am hoping I can fix it without him having to do a hard reset on the phone losing all his stuff.
Thanks.
jh20001 said:
How would I go through with accessing to remove MS Voice Command from the kaiser without opening the main settings window. I installed a few applications (i.e., TouchFlo 2, Youtube, HTC Audio Manager, PTTfix and MS Voice Command 1.6) on my friends Kaiser running WM6.1. All of these programs work fine on mine (WM 6.0), but now on his the phone reboots everytime you click on settings int he start menu. The only thing I can guess thats causing it is MS Voice Command since it creates an Icon in the Settings window.
I need to either A) find a way to manually remove the icon maybe...if that could work, or B) manually find a way to uninstall voice command.
I am hoping I can fix it without him having to do a hard reset on the phone losing all his stuff.
Thanks.
Click to expand...
Click to collapse
You can uninstall software with SKTools. Download a trial version from Handango and try it. If you like it, buy it! My guess is you will probably have to do a hard reset anyway to clean up that mess.
Ill do that. I'll use SKtools on his phone to remove MS Voice Command next week.
Has anyone else had this problem? It would be great for him to have Voice Command. He's been drooling over the feature on mine so long. Now that he finally has a kaiser, he can't use it because it doesn't want to work on his. No fun.
Another easy way would be to use Activesync Add/Remove Programs feature on a connected computer
I don't think he has access to a computer but I will keep that one in mind. We hadn't even had a chance to use the sktools option yet since he got sick so I haven't seen him around in a bit.
I really wish the program would have worked :/ I might try reinstalling it again ontop of itself....could do the trick. Maybe the program corrupted itself the first time some how.
version
this happend to me before, it was the version msvc i was had installed i dont remember which version though.
eisean said:
this happend to me before, it was the version msvc i was had installed i dont remember which version though.
Click to expand...
Click to collapse
This is, this is 1.6 and there is nothing newer
You could also simply create a shortcut/link that goes directly to the Add/Remove Programs settings screen.
Try putting this code in a .lnk file:
Code:
Settings>System>Remove Programs = 21#ctlpnl cplmain.cp,10
It will allow you to bypass the main Settings screen that crashes.
Hi,
I have a TD2 and i have just installed Voice Command (XDA MSVC_US_PPC 1.6.19209).
After Installation it works partially.
I would like to solve the following problems:
1. The program does not appear in Start Menu or Programs menu.
2. If i go to Settings/Other/Voice Command, there is no option available to assign one of the buttons on cellphone to activate Voice Command. Is this possible?
If i go to File Explorer and find the folder that holds the Voice Command program, click on the file, then the program is activated and works just fine.
But i would like to start it using a button on my TD2 and not on the bluetooth headset
Here's what you need;
Create shortcuts to Feature Settings and Applications manually
[APP+DRV] [Keys remapper] Topaz Keyboard Controller GSM v1.4
Have fun,
Senax
I often find myself late at night having to reach for the keyboard to type something in the browser on the PC. On Screen Keyboard helps, but it's slow. Gmote helped even more, but I'd like the step further and go with the voice input.
I've used Windows 7's voice recognition, but I find that my android phone does a better job at recognising some things.
I'd like to either use my phone as a wireless microphone for my PC to use with Windows 7's voice recognition, or just being able to use the voice input from the android phone to input text on the PC.
However, for some reason neither Gmote or Teamviewer allows you to use the mic button on your android keyboard. Thus preventing us lazy people from dictating to the computer.
Droidcam works for video and audio, but not as a Recording Device in the Windows sound settings and therefore can't be used as a voice recognition device.
Long question short:
How do I input text on the PC by shouting at my phone?
And yes, I chose a lollipop because it looks like a mic.
easy
mindlessbeing said:
I often find myself late at night having to reach for the keyboard to type something in the browser on the PC. On Screen Keyboard helps, but it's slow. Gmote helped even more, but I'd like the step further and go with the voice input.
I've used Windows 7's voice recognition, but I find that my android phone does a better job at recognising some things.
I'd like to either use my phone as a wireless microphone for my PC to use with Windows 7's voice recognition, or just being able to use the voice input from the android phone to input text on the PC.
However, for some reason neither Gmote or Teamviewer allows you to use the mic button on your android keyboard. Thus preventing us lazy people from dictating to the computer.
Droidcam works for video and audio, but not as a Recording Device in the Windows sound settings and therefore can't be used as a voice recognition device.
Long question short:
How do I input text on the PC by shouting at my phone?
And yes, I chose a lollipop because it looks like a mic.
Click to expand...
Click to collapse
easy... i use unified remote...
i think splashtop and gpp remote also works!