wm5 - big problem.... - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I´ve Update my Qtek 9090 and at the end e tryed to sync with activesync 4.0 but doesn't work....when i put the PDA in the cradle my windows opens the "Found New Hardware Wizard"... the computer doesn´t install the drivers...it recognize a "Generic RNDIS (Prototype--Remenber to change idVendor).....
i can't install anything and i can't downgrade.....

tunekas said:
I´ve Update my Qtek 9090 and at the end e tryed to sync with activesync 4.0 but doesn't work....when i put the PDA in the cradle my windows opens the "Found New Hardware Wizard"... the computer doesn´t install the drivers...it recognize a "Generic RNDIS (Prototype--Remenber to change idVendor).....
i can't install anything and i can't downgrade.....
Click to expand...
Click to collapse
READ HERE !!!
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home

Related

mtty.exe not working!!!

Hello!
Where I can download mtty for Trinity?
http://wiki.xda-developers.com/uploads/mtty.exe not working!!!!
Hello, so that its it functions is necessary to neutralize (wcescomm.exe) ActiveSync and then to select port USB in mtty.exe.
I have SPL-1.01 MFG, but......
USB> task 32
Level = 0
Cmd>lnb C:\finalsplash.nb 500e0000
:F=C:\finalsplash.nb
:A=501A0000
:O=00000000
:L=FFFFFFFF
start NB image download
Click to expand...
Click to collapse
On this step, process stoped
BE WARNED THIS ROM ADDRESSES ARE FOR HERMES, NOT FOR TRINITY... flashing the wrong address can brick your device!
you have to use mtty 1.16 for the lnb command to work.
Take it from here:
ftp://xda:[email protected]/Hermes/Cooked_ROMs/SPL-1.01MFG_Pack.zip
pof said:
BE WARNED THIS ROM ADDRESSES ARE FOR HERMES, NOT FOR TRINITY... flashing the wrong address can brick your device!
Click to expand...
Click to collapse
Say me, please ROM adress for Trinity!
Sorry, my English very bad....
lvsw said:
Say me, please ROM adress for Trinity!
Click to expand...
Click to collapse
sorry I don't have a Trinity and I don't know what is the ROM layout on it, you can investigate yourself capturing the output of the RUU while flashing a rom with usb monitor, dumping rom parts with rbmc bootloader command, and dumping mmu and parts of mem from gnuharet... but it's a long process until you manage to get all the addresses correctly. You have to compare what you get from the device with the *.nb file extracted from the NBH to see where each part of the ROM starts. Can't really do this without having a Trinity on my hands
Problem using mtty
I have some ploblems using mtty.... I deselect "connect to USB" in pc activesync, then I connect the pocket pc on the usb cable, then I start mtty and I select USB.... I have a the mtty window in which is written CLIENT then, again, CLIENT, and the pocket pc... CONNECTING TO USB... and this situation remain without any changement.... where I am wrong?
pof said:
you have to use mtty 1.16 for the lnb command to work.
Click to expand...
Click to collapse
Actually, the LNB command must be implemented in the bootloader to work. If you connect to Trinity using any version of MTTY (from 1.10 to 1.46) and type LNB, it will just give an "Command error!!!" message.
yes, but seems to be implemented on the MFG bootloader version that is left on the device after unlocking it with imei-check unlocker, isn't it?
can't get MTTY to connect w/ Trinity
dr-jo said:
Hello, so that its it functions is necessary to neutralize (wcescomm.exe) ActiveSync and then to select port USB in mtty.exe.
Click to expand...
Click to collapse
Not that I think it should matter much but in case it does I'll say first that I'm running a PC w/ Vista and not xp or earlier.
Anyway, I can't get MTTY to connect to my Trinity.
The only port that MTTY can open is my Com3. All other ports, inluding the one titled "USB" can not open.
When I have MTTY open on Com3, there is no response to any command so I suspect although the application is occupying the port, it is not communicating w/ the Trinity.
Can anyone provide some insight here or tell me the correct com port settings (parity, baud, stopbits, etc)?
Thanks,
J
I tried MTTY on my WinXP notebook as well. I get the same situation. I downloaded a freeware terminal emulator application also but wasn't able to establish coms w/ the Trinity either.
Can someone confirm their com settings in MTTY?
The same thing has happened to me on p3400i, the New Gene, followed the guide at XDA to every letter, though I knew my device was a new Gene. Now the mtty program opens with some settings window instead of the USB button. Only port accessible is COM3. Flashed and bricked by Olipro SPL.

Update stuck on bootscreen

Could anyone help me? I tried to update my MDA III with BA_TMNL_14200_119_11300_Ship. But it stucked on the bootscreen. It say serial v2.05.
I already read this: http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP.
I have some problems with following the steps:
I pressed record + power + soft reset at the same time. But I doesn't show the bootscreen, only Serial v2.05
I run mtty. But I couldn't find: WCEUSBSH001 only 'usb'.
Where should I enter: set 14 0 etc.?
Thank you
what other options do you have rather than WCEUSBSH001 ?
also which OS do you use to do this?
I use windows XP SP2. I have the option: com1, com2, com6 and usb.
MDAIII: windows mobile 2003 SE
hm did it try to update???did you get any error...
i think u lost your ms_.nbf

Downgrade from WM6 to WM2003SE activesync problem

i'm really keen to get this issue fixed.. any suggestions would be appreciated.
i have just downgraded from WM6 to WM2003SE (o2 XDA offical rom 1.40 for AUS) and i cannot sync the device anymore.
i have completely set the device back to it's original state, ext rom, main rom, radio rom. the PDA itself works fine, no issues there.
i receive an error when i try to sync with my laptop.. (which it used to sync with when i put WM6 on the device).
the error is - cannot verify the version of activesync on your device, a program such as a firewall may be blocking a port activesync uses to connect to your device, you may need to upgrade to a more recent version or activesync
i have removed activesync, deleted all the registry entries, folders and files relating to activesync that i could find. reinstalled activesync, still no luck.
-> i can get the device to sync with my desktop without any problems (i never used the desktop to sync to it when WM6 was installed)
however all my data is on the laptop.
Any ideas ?
update
here is an extract from the log..
**** ActiveSync (4.5.5096 RETAIL) started, Cmd line: '/onconnect'
10/08/2007 16:07:14.324 Creating new partnership for device 0x0 (Pocket_PC, PocketPC).
10/08/2007 16:07:14.324 Error 0x8000BADD: Failed to get version number from device.
10/08/2007 16:07:15.927 Creating a guest connection for device of type 'PocketPC'
-> i can't get into the screen to clear the storage and hive..
i can get into bootloader.. can't get it to work when i press power, reset, camera and record.. just goes into bootloader.. or the numbers come up on the bottom..
could there be some residual information left behind from the previous install of WM6 ??
how do i set the version no manually ? is this done in the PDA registry ??
I don't remeber having this problem. All you can do it try to downgrade ActiveSync to one of the older versions.

Ugent help wanted

i've got a qtek 2020i
but something went wrong with an upgrade downloaded from qtek netherlands.
now i can't turn it on it doesn't work anymore
in teh screen i can read
serial
v1.01
or when in the cradle usb
plz help out here i can't fint it with active sync.
inreally need the damn thing. it's like losing my right hand
it came with winmobile 2003 ce
maybe i need a more resent version.
I am not an expert by any means but the fact that it switches to USB when cradled means it should be reflashable with a new ROM, search the o2.ie site for their most recent ROM. Not saying their offering is the most recent but it should get you going again
i searched but i can't find anything.
i don't know were i can find it
and if i do how does it work?
my telephone is using Orange / T mobile
Ok I had the same problem recently and managed to fix it using mtty.exe, and a working flash file.
The procedure goes like this:
Get mtty.exe, ( I found a copy on a file sharing site using google ).
Open Activesync and disable the USB option in connection settings, you'll need the usb port for mtty.
Put the device in the cradle, and check that it says USB , (it may say serial 1.01 at this point, don't worry, this happened on mine).
Run mtty.exe, and select USB, this will open a terminal window allowing you to communicate with the device. If you don't see USB as an option then exit mtty and try plugging the USB cable into another port.
Once you have the terminal window open, type task 28 and press enter, this will format the DiskOnChip.
Once this is complete and there are no errors, exit mtty, and run the upgrade, this should hopeully restore your Alpine.

diamond & windows 7

hi guys!
when i connect the diamond at my pc, windows 7 tell me: unknown device
i have installed the wmdc and yesterday my pc recognize my diamond!!!
what i can do?
pls help me!!!
P.S. i've tried to reinstall the wmdc but don't work
try changing the usb port
i've tried but didn't work
try reboot sometimes computers start on the whole unknown usb device
and the only cure is reboot
is the only solution?
it's possible is an hardware issue?
Re-install WIN 7
If rebooting too doesn't work then i recommend re-installing Win 7, it hardly takes half an hr..
i tried to change the cable, to change the port usb,reinstall wmdc, format computer, hard reset, another computer...but nothing...
what i can do?
i'd uninstall wmdc even search and remove any traces of it in regedit
of cause if you reinstalled win7 from scratch that should happen automaticly
or I would try connecting it to another computer to verify that the device connector was not damaged
it's possible is an hardware issue?
because the pc recognise my diamond with bluetooth
news
my pc recognize my diamond with bluetooth but for the usb port nothing...
i've tried to install a new rom version but nothing...
how i can install an original bootloader from internal storage?
as I said try connecting it to another computer xp with activesync or later with wmdc
anything
you don't need to sync or anything just detect it if works you could even use a public library computer if they are not too locked down
thats how you detect if the connector in the phone have been damaged
about doing it from Internal storage I'd suggest you check the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
maybe around the "Upgrading / cooking / flashing:" section
i think the usb connector on the phone is broken
the only solution is the assistance...but i have the hardSPL inside my phone!!!
Try it on another PC .
i've tried...but nothing
windows fault
This is actually a problem with windows.
I had the same issues but solved it by fiddling with the device manager. This is slightly more advanced than just plugging the phone in but it's not that hard.
Also you can check to see if this is really a problem with the phone. Try to connect the phone in disk mode (so it registers as a memory stick). If it shows up it means it really is windows having some issues detecting the device.
I have the same problem, but when the TD is in disk mode no problem at all
stronkyz said:
hi guys!
when i connect the diamond at my pc, windows 7 tell me: unknown device
i have installed the wmdc and yesterday my pc recognize my diamond!!!
what i can do?
pls help me!!!
P.S. i've tried to reinstall the wmdc but don't work
Click to expand...
Click to collapse
STEPS (on HTC TOUCH DIAMONF):
1. START
2. SETTINGS
3. CONNECTIONS (tab)
4. USB TO PC
5. UNCHECK "Enable advanced network functionality"
6. OK
Try now to connect your HTC with your PC (Win 7)
stronkyz said:
i tried to change the cable, to change the port usb,reinstall wmdc, format computer, hard reset, another computer...but nothing...
what i can do?
Click to expand...
Click to collapse
may be you could change diamond's rom

Categories

Resources