Related
Hello
can somebody help me understanding the difference betwenn Voice command and speed dial and if I can use both on the same PDA ?
So far I understand that
- Speed Dial dials numbers and start programs by using voice tags
- you need to train each name to be recognized
- there is no true voice recognition
- Voice command dials numbers and starts programs by voice recognition
- in addition VC reads calendar entries and SMS/E-Mail
- there is no training mode to increase accurancy
So which program would provide better results for recognize and dial numbers by voice ?
Can I run both in parallel and use VC for the calendar function and Voice speed dial for the dialing ?
Plus I try to install VC 1.6 now .. but the button maps only to the explorer button on my TytnII .. not able to move him to the voice record button with the button application in settings
any suggestion / fix
Thanks freecall
freecall said:
not able to move him to the voice record button with the button application in settings
any suggestion / fix
Click to expand...
Click to collapse
I have the same problem.... any solution?!?!?!?
Cyberon is crap. I posted a detailed procedure for replacing it here:
http://forum.xda-developers.com/showthread.php?t=337501
I have installed Cyberon voice commander v2.0 and i am very happy with it when i use it with my bluetooth!!!
My only problem is that i do not know how to assign this program to the default "button 6".
I think default settings are:
"Button 6" --> Cyberon voice commander and
"Button 6 (Hold)" --> Record. (This one works).
hmm that sounds like a drastic deinstall .. so anyway to get the Voice speed dial back without doing a full hard reset if I would it like better than VC after some testing ?
Freecall
M$ Voice Command ROCKS!
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Russ741 said:
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Click to expand...
Click to collapse
I have to agree with Russ. Microsoft Voice Commander is by far the best ~$17.00 I have spent for this phone, as well as the 8125 I had before this. The Voice regconition is awesome. I did have to change the buttons as described above. I chose the camera button as I never use the camera anyway. It works great with my HT700(headset) as well as the HT820(bluetooth headphones). The options allow for a good level of customization as well.
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
freecall said:
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
Click to expand...
Click to collapse
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Russ741 said:
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Click to expand...
Click to collapse
I did not uninstall Voice Dial. IF you want to hear the calls and emails, make you configure VC properly. There is settings for only:
1.) Only announce during Free-Time. Make sure you check that one to whatever you want.
2.) Only High Priorty Emails get annouced. Again, check whichever option you want.
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Say "What can I say?" and you'll have your answer...
simon-ph said:
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Click to expand...
Click to collapse
or go to the Microsoft website and look up VoiceCommand 1.6 for PPC. The list is really quite long!
Russ741
Any ideas Gang?
So, after following the thread for removing voice dialer and remapping the PTT button to become button 6 and button 6 (hold) VC is still not announcing incoming calls (and yes I have configured the options!) anyone have any idea why it would perform 90% of its duty and not the last 10%?
Russ741
Are you sure it's not announcing them, or is it possible it's announcing them through the "wrong" speaker? If you've got it set to use BT, BT, and only BT, then all of the announcements go through the headset, or don't get made if it's not currently connected (like walking out of range and then back in).
I tweaked mine to announce only through the speaker, then turned it off because the robot voice annoyed me, but at first I thought it wasn't working...
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
It's based on the contact name, so "Call Smitty" will confuse it.
Is it possible to send messages just using voice or only receive them?
jackjohnson said:
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
Click to expand...
Click to collapse
It is based on what ever names you have in contacts so, for example if I want to call my office I say; "Call work" since there is only one number in the contacts database VC doesnt ask for Mobile, home or work. And since my office is just listed as First Name: Work Last Name: <blank> it understands.
Russ741
emmit said:
Is it possible to send messages just using voice or only receive them?
Click to expand...
Click to collapse
I simply reads the text or email to you, so there is no way to compose a message with VC.
Russ741
Hi!
I used this software before in my Ipaq. However when I tried this in my Kaiser, had a feeling that it slowed my Kaiser and also freezed it.
Anybody know software which is doing:
- Answer preconficured sms-message to caller if I am not answer or press hang-up
- Add this call to my calendar, with text what sent to caller
- Check my next availibility time and adds it to that sms
Like: "Automatic response: I am not available right now. I'll call you bac as soon as possible. According to my calendar I'm free at 14:30."
Like that... you can check sms notifier software from the webpage: http://www.codeplex.com/SMSNotifier
Nobody have any suggestions?
Try http://www.pocketx.net/products/photocontactspro_sm/
does any 1 know if there a way 2 have some kind of voice mail icon /alert othere than the singel notice u get rigth away when u have a new voice mail..kuz sometimes ill be @ work n have my phone on silent, but after work ill check the notification message on the screen n ill see x amount of miss calls but no icon or alert for a new voice message....any reg hack or 3rd party softwarei can use???
Usually, if you have a new voice mail, you should see a icon like "o_o" on your taskbar notifying you of the new voice message. The icon somewhat resembles a tape image.
If this is not the case, you can always use the PhoneAlarm App. This app displays all new items, and you can set for repeated notification, just in case u don't hear it the first time.
Hope this helps,
nKiwan said:
Usually, if you have a new voice mail, you should see a icon like "o_o" on your taskbar notifying you of the new voice message. The icon somewhat resembles a tape image.
If this is not the case, you can always use the PhoneAlarm App. This app displays all new items, and you can set for repeated notification, just in case u don't hear it the first time.
Hope this helps,
Click to expand...
Click to collapse
thanks for the reply n idont get that icon but that phonealarm sound good. you dont have the cab or a link 2 it would u???
that icon should appear on the right of your signal strength on your taskbar, at the top. Leave yourself a VM and you should see it.
As for the CAB for phonealarm, just PM and ill send it to you...
I also recommend SPB Mobileshell 2.0. But make sure you use the newest build. The newest build has an icon for VM when u receive a new one.
There are various programs out there that will remind of you of missed events.
I use SPB Phone suite, but I've seen plenty of others.
Hi,
after searching for weeks around ways to make the ring tone for text messages work, I found that even though there exist several proposals to solve the problem, many htc diamond users still apparently don't succeed in getting it done, myself included.
The problem is that if a message arrives, the phone returns to normal mode if on standby, the lights flash, but NO TONE is played. No matter if in standby mode or not.
So far I tried the following which at least made the phone wake up and the light flashes. However, no sound is played and moreover the message is not displayed. (I am not using Manila but SPB Mobile Shell (tried 2.15 and 3.0 and without, but does not change).
things tried:
1) I did several Hard Resets including using a totalling of five different ROMs (including one with 6.5)
2) Trying all possible settings in the alerts and Notifications menus, Vibrate, Program Sounds, built-in sounds,...
3) edit the registry to make the phone wake up on Message
4) Install the HTC Hotfix for the greyed out REPEAT option
The strange thing is, once I flash the phone new, it works for about one day, but then stops (however, I used to install some programs during that period, so far could not 8for the lack of time) find out what was the particular reason.
but after about 10 complete new Flashs I am really desperate that one of the most simple features of cellphones, an text message beep, seems not possible with the HTC Touch Diamond.
In any case, I know there are a lot of discussions around this issues but I tried all of them and it seems that they don't work for many others as well, while it does for some.
It would be great to have a final thread getting this issue fixed ultimately!
Thanks for your experiences / ideas !
cheers,
Playagiron
Solved
So after long trials and errors, I found one more reason why one cannot hear text message sounds:
I had deleted the Activesync Registry Key in order to get rid ot the Outlook Email Account as suggested in several threads. Apparently this made the sms sound not work anymore, for whatever reason.
Just restored the backup of the Active Sync key to HKLM Software Microsoft Inbox Svc and voilá!
well i think this is one of the most crucial and important problem with HTC phones...i had the same problem with my HTC Touch before...hopefully this should not start with my new diamond.
solution of that i found was something similar what u stated. i tried deleting my smses..i had more than 3000 sms in inbox and in outbox around 2500...so i deleted say around 1000 sms ..which might played some trick and then sms sound started...unfortunately my htc touch then got stolen ...i wish i would have not fixed that problem for thief to go with same misery of not getting incoming sms sound
it didn't work for me....grrrr
any new solutions?
playagiron said:
So after long trials and errors, I found one more reason why one cannot hear text message sounds:
I had deleted the Activesync Registry Key in order to get rid ot the Outlook Email Account as suggested in several threads. Apparently this made the sms sound not work anymore, for whatever reason.
Just restored the backup of the Active Sync key to HKLM Software Microsoft Inbox Svc and voilá!
Click to expand...
Click to collapse
Same problem here.
I was hearing sounds in incoming emails a few days ago but suddenly no sound is played when i receive an email.
I didn´t delete any registry value, so i don´t know if your solution can help me, but... do you remember the registry key to review, please?
Thanks!
Still looking for a solution anyway
EDIT: I have found a pseudo-solution: if i check the box "Display message on screen" (Sounds & Notifications), new email notifications sounds normally.
I don´t like seeying WM notifications pop´ups, but... it´s the only way new email are notified with sound.
I seem to have a recurring issue. I can not make a phone call from my contacts list. If I go to my contacts and tap call mobile or call home it does not launch the phone. It does nothing. If I tap email or sms it works fine. The only way I can make a phone call is to manually type the number in. I have tried different roms from different people and I have the same issue.
Has anyone come across this? Is this a common issue ? Is there a fix for it ?
ryche316 said:
I seem to have a recurring issue. I can not make a phone call from my contacts list. If I go to my contacts and tap call mobile or call home it does not launch the phone. It does nothing. If I tap email or sms it works fine. The only way I can make a phone call is to manually type the number in. I have tried different roms from different people and I have the same issue.
Has anyone come across this? Is this a common issue ? Is there a fix for it ?
Click to expand...
Click to collapse
Might be able to help out more if we knew what ROM you are using. I do not have this issuse and have used Miri, Duttys and PhamQuang ROMs.
I have used the wm6.5 energy Leo rom, I 've used Miri's 6.5 v9 manila 2.5 rom and Dutty's 6.5 R4 rom and they have all done the samething. Right now I currently have Dutty's 6.5 Leo R4(MSVC) rom installed. The funny this is that at first it worked just fine but when I started adding the contacts I used the most to the quick launch in the contacts list is when this started happening. The other roms did it right off the bat.
ryche316 said:
I seem to have a recurring issue. I can not make a phone call from my contacts list. If I go to my contacts and tap call mobile or call home it does not launch the phone. It does nothing. If I tap email or sms it works fine. The only way I can make a phone call is to manually type the number in. I have tried different roms from different people and I have the same issue.
Has anyone come across this? Is this a common issue ? Is there a fix for it ?
Click to expand...
Click to collapse
what other programs do you have installed on your phone? do you have other apps that include contacts functionality? also, are you trying to call from the Manila contacts app or the Windows contacts app? can you call contacts that are not on your People (Favorites) page? i have no problems initiating calls from the Windows and Manila contact apps by tapping "Call Mobile", "Call Home", etc. given your issue is not ROM specific, i'm inclined to believe its related to software or something stored with your contacts.
i have no other contact apps installed. i can not make any calls from quick contact list or from the "all people" list
ryche316 said:
i have no other contact apps installed. i can not make any calls from quick contact list or from the "all people" list
Click to expand...
Click to collapse
after you flash a ROM, how are you reloading your contacts? if syncing, what is the source? after your next flash, i recommend adding a few contacts manually (3-5) and then determine if you can initiate calls from the by tapping "Call Mobile", "Call Home", etc. if you can, then reload your existing contacts and try initiating calls again. if it doesn't work, then the next item (in the process of elimination steps) is to review your contacts for info that could be causing the problem. fyi, i'm using MS Exchange to store and reload my contacts after flashing a ROM.
I am syncing with my PC and pulling my contacts from outlook. does it make a difference if you add a contact to the favorites list having the phone number or sms number as the number saved to quick contacts ?
I just noticed that if I go to start menu, click contacts, I can make calls that way.
The only apps I have installed is, tomtom7, slide to unlock and tweak HD
OK I finally found the problem In tweak HD if you go down to 1.8 phone pad style. I had it set to windows because i don't like the slide to answer call. When I put this setting back to HD (default) I was able to make calls from the manilia people tab and all contacts list.
So I guess I'll just have to choose either to not use the manilia people tab to make calls so I can answer the phone using the phone soft key, or use the people tab and have to deal with the slide to answer call. Unless there's another way to disable the slide to answer call
ryche316 said:
OK I finally found the problem In tweak HD if you go down to 1.8 phone pad style. I had it set to windows because i don't like the slide to answer call. When I put this setting back to HD (default) I was able to make calls from the manilia people tab and all contacts list.
So I guess I'll just have to choose either to not use the manilia people tab to make calls so I can answer the phone using the phone soft key, or use the people tab and have to deal with the slide to answer call. Unless there's another way to disable the slide to answer call
Click to expand...
Click to collapse
ahhhh... yeah, it's typically something we install and forgot or we assume it didn't have any impact on our issue. fyi, you don't have to use slide-to-answer to answer a call. i never use it, lol, i always use the send key (key to the left of the home key) to answer calls or the end key to ignore the call. glad you got it sorted out.
yea amazing. As you can see it drove me crazy. I found the solution by accident. The only thing I hate now is when I get a call the caller ID from slide to unlock comes up ( which is the one I prefer ) and the windows/manila one keeps flashing on top of it.
Otherwise Dutty's rom seems pretty solid
Camera zoom
I noticed that I do not have the zoom function with this rom, which I knew already, but if I was to install the old camera cab to get the zoom function back would I lose the ability to take pics at 5megs ?
Also I have tweak HD installed and it unlocked some good features like burst and sport, would I lose those functions ?