Related
Has anyone tried putting/modding the Universal ROM on the XDAIIi. I just wondered if the hardware on the Universal was more like that on the Alpine and we might be able to use it? Just a thought...
impossible to do that
Rom images are made up with specific drivers and cannot be transfered to other models, the inner workings of different models are completely different even if there specs look the same (WiFi etc ...) they are totally incompatible
true that
You can't upgrade directly, but there are people who modifiy ROMS to install on other devices, look at BUZZ and the Blue Angel WM2005 update!
Buzz is willing to design an upgrade for Alpine, but does not own one, so until he does or people donate to help him buy one, it is unlikely that we will see a cooked WM2005 upgrade for Alpine yet!.
Useful link below
http://www.buzzdev.net/
wait until buzz got an alpine....sure he'll play with it....
I have used the Universal WM5 upgrade on my i-mate PDA2,First I Partitioned the Rom to have the full Rom Size 128MB then I copied the nk.nbf from The Universal to the Original i-mate upgrade and used the MaUpgradeUt_noID.exe to do the upgrade.
Using all the universal rom did not work and got Model Error.
The Upgrade went all the way very smooth but couldn't hard reset the PDA2.
All I upgraded was the CE image only,Radio And Extended Rom are the old ones.
I used all buttons compinations and stil could not reset the PDA2.
So I went Back to WM2003SE.
This proves that it can be done.!!!!
Maybe it is the extended rom part that stopped it, There is no way so far to unlock the Alpine extended rom.
I hope Buzz can do something about it,I am willing to do all the trials on my PDA2.
yes this is real.
The KJAM rom, which can be found in the FTP of this site, is working on the Qtek9100 !!!
does anyone have any thoughts about that? is this ROM a better one than the 9100? I think it is!
From what I understand, The KJAM is slower with its rom then the QTEK. Because KJAM is full of apps which might not be needed. Once those apps are removed it should be exactly the same ( are the rom version numbers not the same )
ANyone have any views on this ?
I believe the ROM dates are different, with the K-JAM being 9/16/2005 and the Qtek at 9/22/2005. I don't know the difference between the two, but I'd be interested to find out. Also, I'm still trying to find out how to change the splash screens (HTC, then i-mate) when it boots, but it's different than previous HTC models so far (not splash?.nb).
As for the apps, the difference does lie in the Extended ROM, so once you've custom-tailored that area, they should be identical.
HOWEVER, people on HowardForums are complaining about the Bluetooth in the 9100, where K-JAM users don't seem to be having an issue. I didn't check up further on this, can anyone confirm?
Would yo umind sharing information about details? How to avoid device ID error? IS there hacked exe file? I need to flash my QTEK with IMATE ROM since I think BT performance in IMATE is way better.
TIA
bt on the qtek smells
Grill! Wake up and give us a clue,please!
I did the soft reset after the WM5 setup so that the crap wouldn't install and it works great
so what did you do?
imate rom on a qtek???
i got a vender error when try to install the k-mate rom on my qtek 9100. what´s the trick, that it work without the error? please help!
nice we have to get around that.
Anyone try to place the Wizard in bootloader mode first before running the upgrade utility?
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
pimbo said:
BeyondtheTech said:
If someone can point me out to the Magician upgrade utility with the NoID hack and give me the original file as well, I might be able to do a byte-compare and apply it to the Wizard's upgrade utility.
Click to expand...
Click to collapse
This one? ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
from here: http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Click to expand...
Click to collapse
Hi,
I don't think this is the good way because I unpacked the "KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
I don't know which file have to change to "MaUpgradeUt_noID.exe".
Any idea?
THX
TB
Again, if I can find out how the NoID utility bypasses the check by comparing it with the original (does anyone have the exact file before it was hacked?), and we can compare, it'll be a start to look for similar code or text in the EXEs or DLLs of K-JAM's upgrade utility.
Find me the unmodified version of the NoID utility. Look on the FTP, and check all the other Blue Angel ROM update utility's EXE files...
thebiker said:
"KJAM_WWE_ROM_1010903_104_10110_cdl_wwe_ship.exe" (rename to rar)
and I've foud the following files:
Well
EnterBootLoader.exe
nk.nbf (74 MB)
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Click to expand...
Click to collapse
Looks to me that somebody who knows howto and has this phone for testing could to edit the The ROMUpdateUtility.exe to bypass the country id errors,
And use as refference maybe the hacked no id loader for the BA.
P.s. the original MA upgrade utility should be found in the original roms from the providers of the Magician devices, we got it from them if i'm right.
Hope it helpes a bit,
I'm no developer, but this file sticks out in my mind..."RUUGetInfo.exe" If that is part of the upgrade installer then it looks to me that it is looking for the actual device ID, and it probably has to fall within a certain range to allow the upgrade to proceed. Something to the effect that each country, language or brand has a range. If your device isn't in that range, you are SOL.
With each generation they do something different, and more difficult.
Dave
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
vbguru613 said:
i think it has to be in the ROM if not then all we have to wait for is a update from qtek and switch the nkf file
Click to expand...
Click to collapse
Nah, it's Much more involved than that. Just look at the process taken to develop the method to do it on the JAM, PDA2K, and so on. With each generation they make it more difficult.
Dopod 838 > K-Jam rom upgrade.. need some work
I had under my hands the Dopod 838 which is infact the cH version of the WIZARD.
I would like to load the imate K-Jam rom to the Dopod
Playing a bit with the machine, it seems that the Boot loader is actually looks like the Typhoon, the TyphoonNBFTools utility will decode the NK.NBF file but I am not sure what is the Vendor ID of the Dopod.
On top of it after altering the Languge from English to WWE and made the vendor DOPOD, the romupgrade utility reports the new version going to Prodigy and the Lang is English. it seems that although the TyphoonNBFTools was able to decode the NK.NBF, the upgrade application did not take the header information.
I did run also the Boot loader command under the MTTY (on the usb port) and command that did work for the typhoon "R2ds all" responded that I do not have the authority to dump the rom image.
Tried the command password WIZARD and although it did take it, still was not authorized to dump the rom image.
If somebody could help find a method to bypass the protection of rom , upgrade (bypass vendor , Country code...) it would be very helpfull to exchange roms.
:shock:
I've been playing with the ROMUpdateUtility.exe
Well, i've also noticed that the rom is like a typhoon rom.
Ive removed some strings to RUUGetInfo.exe(since this one seems to do the thing), but i cannot test it,
I got error 222, device not responding, (DUH, its a BA :lol
Maybe somebody can replace this file for the original in the folder and try running it. (if it passes the country id and the model no)
But it is a test, use at your own risk.
Do not blame me for anything.
Hi all,
Moz's RUU_Trinity_Orange_UK_1.23.61.5_1.38.00.11_GSM_NoIPL_NoSPL.exe :-
Links :- MegaUpload | RapidShare | SendSpace
Whilst teaching myself to build/reconstruct/extract Trinity ROM's I have cobbled together the above linked backup of my Orange UK SPV M700 ROM. I have found this very useful to use as a restore image for my device - back to an "official" UK Orange build (or as close as it can be in the absence of an official UK Orange ROM release!)
This RUU was made using a ripped backup of my M700 at v1.23.61.5 and a reconstruction of the Ext_ROM from the same unit. The RUU is only made possible thanks to the tools found here on XDA-Developers. (Many thanks go to AnDim for Ext-ROM Image Editor, Olipro for Custom RUU Updater and Des for SoftSPL.) The included Radio ROM is the GSM enabled v1.38.00.11 (ripped straight from the last official HTC shipped ROM upgrade) and the enclosed Orange splash screens were reconstructed from .bmp's - again pulled from this site (thanks to Sammis!)
There is NO IPL or SPL included in this build so the same IPL/SPL that are currently on your device will be preserved. The CustomRUU will initially load the SoftSPL and may ask you to acknowledge installation of the SSPL modified Bootloader on your device before flashing begins.
The linked .exe is a self-extracting WinRAR archive which will auto-launch the RUU. You simply need to connect your Trinity to the USB and get to the point of a Guest ActiveSync partnership before launching the RUU! If the Tinity disconnects from USB initially within the Bootloader, just re-launch the RUU software again at that point and the ROM will flash correctly from then. I have tested this software many times and it has always worked for me! (No guarrantees given or implied tho!! )
I hope someone finds this useful! Enjoy!!
Kind regards, Moz.
Nice one, you did a more complete job than me .. I only dumped the OS part of the phone
Good work that man.... been hoping for one of these, now can flash my M700 and see what all the fuss is about ;-)
Thanks,
Been waiting for this for warranty purposes
Does GPS enabled with this ROM?
The included Radio ROM is the GSM enabled v1.38.00.11 (ripped straight from the last official HTC shipped ROM upgrade)
Click to expand...
Click to collapse
GPS radio Rom!
Anyone tried this yet?
Is it an official UK rom?
Will it fool Orange customer services?
It is THE Orange ROM
He took it from his M700 before applying LVSW (I think he used that one).
Orange aint got a ROM out there for us
As for fooling Orange Custard Services...... that really isnt hard... ask them what day it is and that usually works..........
Mozzerr said:
Hi all,
Moz's RUU_Trinity_Orange_UK_1.23.61.5_1.38.00.11_GSM_NoIPL_NoSPL.exe :-
http://www.megaupload.com/?d=52MXMAMG
Whilst teaching myself to build/reconstruct/extract Trinity ROM's I have cobbled together the above linked backup of my Orange UK SPV M700 ROM. I have found this very useful to use as a restore image for my device - back to an "official" UK Orange build (or as close as it can be in the absence of an official UK Orange ROM release!)
This RUU was made using a ripped backup of my M700 at v1.23.61.5 and a reconstruction of the Ext_ROM from the same unit. The RUU is only made possible thanks to the tools found here on XDA-Developers. (Many thanks go to AnDim for Ext-ROM Image Editor, Olipro for Custom RUU Updater and Des for SoftSPL.) The included Radio ROM is the GSM enabled v1.38.00.11 (ripped straight from the last official HTC shipped ROM upgrade) and the enclosed Orange splash screens were reconstructed from .bmp's - again pulled from this site (thanks to Sammis!)
There is NO IPL or SPL included in this build so the same IPL/SPL that are currently on your device will be preserved. The CustomRUU will initially load the SoftSPL and may ask you to acknowledge installation of the SSPL modified Bootloader on your device before flashing begins.
The linked .exe is a self-extracting WinRAR archive which will auto-launch the RUU. You simply need to connect your Trinity to the USB and get to the point of a Guest ActiveSync partnership before launching the RUU! If the Tinity disconnects from USB initially within the Bootloader, just re-launch the RUU software again at that point and the ROM will flash correctly from then. I have tested this software many times and it has always worked for me! (No guarrantees given or implied tho!! )
I hope someone finds this useful! Enjoy!!
Kind regards, Moz.
Click to expand...
Click to collapse
hi there iv tried registering to megaupload to download the file but having problems getting it,,can u post me the file please.the problem im getting with my phone is the GPS isnt working which is wht i need the orginal uk rom for the spv m700 (trinity 100/htc p3300) once again i need the uk original rom including GPS please thanx.please email me at [email protected] cheers
It works
This works very well.Earlier I flashed my m700 ROM to do network unlock and lost GPS service after that. But this restored it. Great. Thanks for all your work.
saiuk said:
hi there iv tried registering to megaupload to download the file but having problems getting it,,can u post me the file please. cheers
Click to expand...
Click to collapse
Hi,
You don't need to register with megaupload to get the file... The whole point of using a free hosting site like that is to avoid having to email such large files all over the place... Besides, I doubt your email provider will allow this size of file as an attachment...
So, I'm afraid the answer is "No" I cannot email this ROM to you.
Either sort yourself out with megaupload or let me know some other free hosting site that you *can* use and I will upload it there for you!
Regs, Moz.
Dynamite555 said:
This works very well.Earlier I flashed my m700 ROM to do network unlock and lost GPS service after that. But this restored it. Great. Thanks for all your work.
Click to expand...
Click to collapse
Hi,
Thanks for confirming the validity of my ROM!
I'm pleased that it helped you out.
I'm now working on a cleaned, fast, minimal installed software version of WM5, based on my own sifting of all the best versions of certain useful apps. Until we see the official Dopod version of WM6, I think a slim/sleek version of WM5 is the best possible utilisation of this handset!
Rgds, Moz.
Just a quick word to say I flashed your rom after having tested a few WM6 roms, and it works fine. As far as I can tell, it looks just like the original orange phone. Thanks.
Wicked Your A Star
Mozzerr said:
Hi all,
Moz's RUU_Trinity_Orange_UK_1.23.61.5_1.38.00.11_GSM_NoIPL_NoSPL.exe :-
http://www.megaupload.com/?d=52MXMAMG
Whilst teaching myself to build/reconstruct/extract Trinity ROM's I have cobbled together the above linked backup of my Orange UK SPV M700 ROM. I have found this very useful to use as a restore image for my device - back to an "official" UK Orange build (or as close as it can be in the absence of an official UK Orange ROM release!)
This RUU was made using a ripped backup of my M700 at v1.23.61.5 and a reconstruction of the Ext_ROM from the same unit. The RUU is only made possible thanks to the tools found here on XDA-Developers. (Many thanks go to AnDim for Ext-ROM Image Editor, Olipro for Custom RUU Updater and Des for SoftSPL.) The included Radio ROM is the GSM enabled v1.38.00.11 (ripped straight from the last official HTC shipped ROM upgrade) and the enclosed Orange splash screens were reconstructed from .bmp's - again pulled from this site (thanks to Sammis!)
There is NO IPL or SPL included in this build so the same IPL/SPL that are currently on your device will be preserved. The CustomRUU will initially load the SoftSPL and may ask you to acknowledge installation of the SSPL modified Bootloader on your device before flashing begins.
The linked .exe is a self-extracting WinRAR archive which will auto-launch the RUU. You simply need to connect your Trinity to the USB and get to the point of a Guest ActiveSync partnership before launching the RUU! If the Tinity disconnects from USB initially within the Bootloader, just re-launch the RUU software again at that point and the ROM will flash correctly from then. I have tested this software many times and it has always worked for me! (No guarrantees given or implied tho!! )
I hope someone finds this useful! Enjoy!!
Kind regards, Moz.
Click to expand...
Click to collapse
HEY NICE ONE MATE...I FINALLY MANAGED TO DOWNLOAD THIS FILE IT WORKS LIKE A TREAT ,,,GPS IS WORKING FINE AND WIFI BLUETOOTH ETC..ALSO MY PHONE IS STILL UNLOCKED,.,.,,I WAS WONDERING HOW TO SET THE GPRS SETTINGS PAY AS GO FOR UK VODAFONE PLEASE CAN U HELP OUT IV SEEN ON HTC'S WEB SITE THEY GOT A TOOL FOR ALL NETWORKS IN TH EUK FOR CONTRACT SETTINGS BUT THERE ISNT ONE FOR PAY AS GO CAN U HELP OUT THANX U BEEN A STAR THO I SO OVER THE MOON MY PHONE IS WORKING NOW THANX
Mozzerr said:
Hi all,
Moz's RUU_Trinity_Orange_UK_1.23.61.5_1.38.00.11_GSM_NoIPL_NoSPL.exe :-
http://www.megaupload.com/?d=52MXMAMG
Whilst teaching myself to build/reconstruct/extract Trinity ROM's I have cobbled together the above linked backup of my Orange UK SPV M700 ROM. I have found this very useful to use as a restore image for my device - back to an "official" UK Orange build (or as close as it can be in the absence of an official UK Orange ROM release!)
This RUU was made using a ripped backup of my M700 at v1.23.61.5 and a reconstruction of the Ext_ROM from the same unit. The RUU is only made possible thanks to the tools found here on XDA-Developers. (Many thanks go to AnDim for Ext-ROM Image Editor, Olipro for Custom RUU Updater and Des for SoftSPL.) The included Radio ROM is the GSM enabled v1.38.00.11 (ripped straight from the last official HTC shipped ROM upgrade) and the enclosed Orange splash screens were reconstructed from .bmp's - again pulled from this site (thanks to Sammis!)
There is NO IPL or SPL included in this build so the same IPL/SPL that are currently on your device will be preserved. The CustomRUU will initially load the SoftSPL and may ask you to acknowledge installation of the SSPL modified Bootloader on your device before flashing begins.
The linked .exe is a self-extracting WinRAR archive which will auto-launch the RUU. You simply need to connect your Trinity to the USB and get to the point of a Guest ActiveSync partnership before launching the RUU! If the Tinity disconnects from USB initially within the Bootloader, just re-launch the RUU software again at that point and the ROM will flash correctly from then. I have tested this software many times and it has always worked for me! (No guarrantees given or implied tho!! )
I hope someone finds this useful! Enjoy!!
Kind regards, Moz.
Click to expand...
Click to collapse
How about listing it here:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
just a case of keeping the page complete - especially for noobies
SPB Backup
Great peice of work!!
At last, a fallback in case all that WM6 experimenting goes wrong.
This is what Orange should ahave had out a long time ago.
Anyone out there treid SPB backup to restore a ROM after flashinging it??
I've flashed back this ROM after using Muns WM6 rom and used Sprite Backup to restore to my original point. All seemed to go fine bar a few little tweaks.
Not sure if thats what you meant. I havent used SPB backup before but i'd expect it to be the same.
Nogs
I was just wondering: How would you restore the original ipl/spl?
TRIN100
IPL - 0.50
TRIN100
SPL - 1.07.0000
Is it possible to extract the orange settings from this rom for internet access?
iamwhoiam said:
I was just wondering: How would you restore the original ipl/spl?
TRIN100
IPL - 0.50
TRIN100
SPL - 1.07.0000
Click to expand...
Click to collapse
Hi,
The absolute original IPL & SPL are not available because Orange UK have not released any M700 ROM's for us to extract them from.
(IPL & SPL *cannot* be extracted from your device!)
That is why I made sure to release my ROM without *any* IPL or SPL inside - thus leaving intact what you already have.
The majority of ROM's available on here do not necessarily include any IPL or SPL so chances are you still have your originals intact anyway!
If not, your only option is to take one of the official HTC or DOPOD ROM's and extract the IPL & SPL from that, compare and hope that the version is the same as what you had originally, then flash to your device in the usual way.
Whenever I download any ROM, I *always* check to see if it includes any IPL & SPL and remove them (there is little to zero point in upgrading them anyway) and that way I always know that I can go back to the abolute factory default of my own phone by simply reflashing with my own backup ROM (ie. the one I have made available here!!)
Rgds,
Moz.
Is my K-Jam totally bricked?
It is now stuck up in bootloader screen.
I am able to swtch it off with power button. I can also have first flash screen.
On connecting with USB port, it shows yellow light indicating that it is charging & that over a period of time, goes green.
Earlier I had flashed TNT ROM but while reflashing newer it got stuck up as after flashing, I tried to hard reset [mistakenly thought ROM is flushed fully] & could not go further after initail first screen.
Other details:
IPL:2.16
SPL:2.16
GSM:02.07.10
O.S.:11.0.0.2
May some one help?
Thanks in advance.
Virat
Nopes ! its not 'Bricked' just had a bad flash. As long as it gets into bootloaders ,its perfectly safe. Perhaps,your phone is not CID unlocked ?
Download the official carrier's rom from its website and flash it in the bootloaders,it'll start to work fine.Then read the guide to cid unlock and upgrade.
Cheers!
boot issues
hi
i am having serious problems with my kjam.i installed black diamond's rom and now my phone boots upto the splash screen where it shows window mobile 6 and gets stuck there.
i have tried a soft spl, but it doesnt help as the phone cant connect or move from the splash screen.also, i can make call or do anything with the phone.
can someone assist me and also point me to a place where i can find the lastest tnt rom.
ghumanfly said:
hi
i am having serious problems with my kjam.i installed black diamond's rom and now my phone boots upto the splash screen where it shows window mobile 6 and gets stuck there.
i have tried a soft spl, but it doesnt help as the phone cant connect or move from the splash screen.also, i can make call or do anything with the phone.
can someone assist me and also point me to a place where i can find the lastest tnt rom.
Click to expand...
Click to collapse
Always post vital data of the phone,which is your device G3 or G4.Have you Tried Soft Reset or Hard Reset.it sometimes help.
Well,if it's a G3,is it SIM/CID unlocked,cuz its required to get the phone CID unlocked to upgrade to wm6,but if its a G4,then use method 'SoftSPL' or 'HardSPL' as it cannot be CID unlocked.
Post IPL/SPL...? of the phone here.
You can find all the latest wm6 Roms in 'Wizard Mobile 6' forum.
Cheers!
Thanks but solution found while reflashing in XP
Thanks for the reassurance Zabardast. I cold not even reflash it with vista but in xp, it sailed smooth. It is working normal now. Any way, thanks again for responding.
Virat
virat said:
Thanks for the reassurance Zabardast. I cold not even reflash it with vista but in xp, it sailed smooth. It is working normal now. Any way, thanks again for responding.
Virat
Click to expand...
Click to collapse
Thanks !
Glade you got it working
Have a nice day !
zabardast_1 said:
Always post vital data of the phone,which is your device G3 or G4.Have you Tried Soft Reset or Hard Reset.it sometimes help.
Well,if it's a G3,is it SIM/CID unlocked,cuz its required to get the phone CID unlocked to upgrade to wm6,but if its a G4,then use method 'SoftSPL' or 'HardSPL' as it cannot be CID unlocked.
Post IPL/SPL...? of the phone here.
You can find all the latest wm6 Roms in 'Wizard Mobile 6' forum.
Cheers!
Click to expand...
Click to collapse
Wireless Carrier
Vodacom
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
Roms tried
BlackDiamond 3.1
i am running XP SP2 on my notebook.
i have restored the original WM5 rom however my screen is now fuzzy.
ghumanfly said:
Wireless Carrier
Vodacom
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
Roms tried
BlackDiamond 3.1
i am running XP SP2 on my notebook.
i have restored the original WM5 rom however my screen is now fuzzy.
Click to expand...
Click to collapse
'Hard Reset' the phone,hope it'll work fine.
Well,I assume,you cudn't do the SoftSPL correctly the first time,try to apply the SpftSPL again correctly,if it works,ok,otherwise you can upgrade to wm6 with HardSPL method.
ba salam khedmate aghaye zebardast
duste aziz man ppc imate kjam daram ke eshtebahan soft spl kardam va rom wm6 prophet rush rikhtam ba tavajoh be inke seri gushi man g4 wizard bashe (ipl&spl 2.16.0001) kholase gushi alan tu safeye avali ke windows ba yek logo az rom marbuteh miad bala gir mikoneh .albateh 2 ta rom kjam asli wm5 ham gir avordam rikhtam vali hamunjuriye albateh jaye shokresh baghiye ke gushi tu halat bootloader gharar migireh va hard reset ham mishe. lotfan be man komak konid ta moshkelam ro hal konam. ba tashakor az shoma
could you please ,solve my problem kjam g4 wizard
laike salam brother
thank you very much for direction. I want to answer your question:
Quote:1. Which was the original official rom running on the phone before you tried to upgrade ?
1- I think wm5 belonge to 2005 becose it is written under the battrey.
Quote:2. What was the original wm5 rom and IPL/SPL of the phone before ?
2- I couldent remember but this phone approved by uaelab company [TA-2005/453 approved][E05/14/40225/g]and I flash with different official rom which you mentioned at ftp://ftp.clubimate.com but nothing happend ,maybe I do somthing wrong.
Quote:3.What exactly you mean you copied jumpspl to the root of the phone,did you applied SoftSPL ?
3- yes correct I did softspl with whit coulor screen then connected to pc and did toast that .
also I have problem to connect wst 4.2.2 to my ppc.
I download it and run, but the software couldent detect my fhone I dont know why .I connet it from bootloader 3coulor but nothing happen and so on.
could you please to explain how can I work with wst 4.2.2 also very important how to connect that because it says I have to connection with activesync .
pls direct me pls
mamnun
kourosh
Hi,
I have a Cingular 8125 phone, I upgraded it WM6 with one of the ROM that I downloaded from xda forums. I do NOT know which one that I downloaded. I remember downloading and installing one of the T-Mobile stuff, then flashing a new WM6 ROM from this forum. My phone locks up every time AFTER I receive/make a phone call. I would like to go back to stock WM5. I have no idea how this works, but it appears that I am running the risk of bricking my device if I do it wrong. Any help would be appreciated. Following is the details of what I have.
During BOOT it shows
T-Mobile Logo
IPL 3.08
SPL 3.08
GSM 2.25.11
OS 6.1.0.0
After boot,
About page says Windows Mobile 6.1 Professional
Device Information page says,
ROM Version: 6.1.0.0 WWE
ROM Date: 1/16/08
Radio Version: 2.25.11
Protocol Version 4.1.13.12
Thanks,
JSenthil
no problem, just flash he original rom.
I have it, from mda t-mobile.
I think i have from cingular to, if you need it, let me know.
Isn't that I first have to downgrade my SPL/IPL to 2.xx in order for the original WM5 to work on my G3 wizard?
Can you please explain the steps involved? BTW, where can I find the original ROM, are you referring to the one that can be downloaded from the HTC website?
Thank you for your help,
JSenthil
Unfortunately I installed iPhone skin onto my Cingular 8125. I would like to revert process and get back my WM5, but I tried "hard reset" (Comm Mng + Voice buttons and poke reset with stylus) and nothing. Keeps going back to the iPhone skin. Few things do not work, still has scroll bar on side, connection and battery icons and no lock mode. Contact list feels like iPhone, but is not well developed, still has bugs and menus to la-la land.
Please help, I don't know much about WM5 or cell phones.
Thanks!
rapanui
ricomilion said:
no problem, just flash he original rom.
I have it, from mda t-mobile.
I think i have from cingular to, if you need it, let me know.
Click to expand...
Click to collapse
ricomilion,
Could you hook me up with the Cingular/At&t original WM5 ROM?
Thanks,
daveetrice
Yes, id like the cingular wm5 stock rom as well if possible...im having problems after "upgrading" to wm6 too.
WM6
Can someone help for locate the WM6 ROM for the 8125 also WM5 so I can scale back if 6 hoses up my phone? Thanks.
Maybe my ROM's would work for you guys
Cingular Official stock wm5 Rom :-
http://www.htcamerica.net/support/8125/software-downloads.html
http://download.america.htc.com/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe